MKL17Z64VLH4 - 64KB Flash 48MHz Cortex-M0+ MCU | NXP
MPN: MKL17Z64VLH4 ✓ فعالMKL17Z64VLH4 نمای کلی
A microcontroller is a semiconductor device that integrates a processor core, program memory, volatile data memory, and peripherals into one package. The Kinetis KL1x family extends the low-power Kinetis KL0x family with additional memory, communications, and analog capabilities. The MKL17Z64VLH4 provides 64 KB of Flash for firmware and 16 KB of SRAM for working data, while its Arm Cortex-M0+ core supports efficient 32-bit control processing in a compact embedded footprint.
Principal device features include the 48 MHz Cortex-M0+ core, 64 KB Flash, 16 KB SRAM, USB connectivity, and low-power operation. The 64-LQFP package exposes 64 pins on a 10 x 10 mm body, providing a practical surface-mount option for designs that require more I/O than smaller microcontroller packages. Its general-purpose positioning makes it suitable for control boards, sensor nodes, communication peripherals, and compact industrial equipment.
The MKL17Z64VLH4 belongs to the Kinetis KL17 family, whose architecture is designed around efficient embedded processing rather than high-performance application computing. Its Cortex-M0+ instruction set supports typical interrupt-driven control, peripheral management, and communication tasks. The exact peripheral set, clock configuration, USB operating modes, and electrical limits must be confirmed against the relevant NXP datasheet and reference manual before a new PCB is released.
Typical uses include low-power sensor interfaces, USB-connected peripheral controllers, compact automation equipment, and general-purpose embedded control modules. In each case, the 48 MHz processor provides timing margin for event handling, the Flash capacity accommodates application code, and the SRAM supports working buffers. USB connectivity can also simplify host-device designs that use standard USB controllers, cables, and update mechanisms.
PCB design should preserve the package pin assignments and recommended decoupling layout defined by NXP. Provide a stable local supply, route high-current USB and clock paths carefully, and follow the NXP hardware design guidance for exposed power, ground, and signal connections. Validate oscillator, USB, and low-power behavior across the intended voltage and temperature conditions before production release.
جایگزینهای drop-in برای MKL17Z64VLH4 — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونهها در این سری
مدلهای همسری که جایگزین مستقیم هستند برای MKL17Z64VLH4 (همان فرمفاکتور و فوتپرینت) — متفاوت در Flash Memory, Mounting Type, SRAM, Package, Product Type.
هیچ جایگزین مستقیمی برای این محصول موجود نیست.
درخواست جایگزینMKL17Z64VLH4 حداکثر مقادیر مجاز و مشخصات الکتریکی
| Product Type | 32-bit general-purpose ultra-low-power microcontroller |
| Product Family | Kinetis KL17 |
| Processor Core | Arm Cortex-M0+ |
| Processor Architecture | 32-bit RISC |
| Maximum CPU Frequency | 48 MHz |
| Flash Memory | 64 KB |
| Program Memory Organization | 64K x 8 bits |
| SRAM | 16 KB |
| Supply Voltage Range | 1.71 V to 3.6 V |
| Supported Internal Supply Settings | 1.8 V / 2.5 V / 3.3 V |
| USB Connectivity | Yes |
| Package Type | 64-LQFP |
| Package Body Dimensions | 10 x 10 mm |
| تعداد پایه | 64 pins |
| نوع نصب | Surface mount |
| وضعیت RoHS | Compliant |
راهنمای پیکربندی پین MKL17Z64VLH4 10 x 10 mm
پیکربندی پین برای MKL17Z64VLH4 (پکیج 10 x 10 mm). این IC دیجیتال شامل GPIO، رابطهای ارتباطی (UART، SPI، I2C) و پینهای تغذیه است. برای عملکردهای جایگزین پین و گزینههای پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستمهای نهفته و چیدمان PCB.
داده پینآوت تفصیلی موجود نیست برای MKL17Z64VLH4.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
MKL17Z64VLH4 مناسب است برای 6 کاربردs: USB Peripheral Controller, Industrial Sensor Interface, Low-Power IoT Node, Compact Automation Controller, Portable Measurement Device, USB-C Enabled Control Module.
USB Peripheral Controller
The MKL17Z64VLH4 fits USB-connected peripheral controllers because it combines a 48 MHz Arm Cortex-M0+ core with 16 KB of SRAM and USB connectivity. The processor can handle control logic, device-state updates, data buffering, and host-to-device command processing without an external host controller. Its 64 KB of Flash provides space for firmware, USB descriptors, configuration data, and application code. The 64-LQFP package also offers more external connections than compact microcontroller packages, simplifying access to LEDs, buttons, sensors, and status interfaces while remaining suitable for a 10 x 10 mm surface-mount footprint.
پیشنهادی
Industrial Sensor Interface
The MKL17Z64VLH4 can serve as the control MCU in a compact industrial sensor interface where low-power operation and local processing are important. Its 48 MHz Cortex-M0+ core is suitable for sampling control, filtering, threshold handling, and communication scheduling, while 16 KB of SRAM accommodates buffers and protocol state. The 1.71 V to 3.6 V supply range supports low-voltage embedded systems, and the 64-LQFP package provides a practical number of I/O connections for digital sensors, status indicators, and local communication. Final peripheral assignments and electrical limits should be verified in the NXP documentation.
پیشنهادی
Low-Power IoT Node
The MKL17Z64VLH4 is appropriate for a low-power IoT node that performs local sensing, state management, and USB-assisted configuration. Its Kinetis KL17 family is identified as ultra-low-power, and the 48 MHz Cortex-M0+ core can execute interrupt-driven control tasks without the overhead of a higher-performance processor. The 64 KB Flash and 16 KB SRAM balance firmware capacity and working memory against board area. USB connectivity can support wired commissioning, firmware update, or data export when the node is connected to a host, while the LQFP package remains convenient for inspection and rework.
پیشنهادی
Compact Automation Controller
The MKL17Z64VLH4 can act as the central controller in a compact automation module that coordinates sensors, indicators, and communications. Its 48 MHz processing rate supports responsive control tasks, and the 64 KB Flash provides more room for application logic and communication handlers than a 32 KB Flash member of the family. With 16 KB of SRAM and 64 exposed package pins, the device is well suited to medium-complexity control boards that need both memory and moderate I/O capacity. The 1.71 V to 3.6 V operating range should be reconciled with the power architecture, regulators, analog sections, and communication interfaces on the completed board.
پیشنهادی
Portable Measurement Device
The MKL17Z64VLH4 fits portable measurement equipment that combines local control with USB connectivity for data transfer or configuration. The Cortex-M0+ core can manage measurement sequencing, control registers, and communication tasks, while 16 KB of SRAM provides space for working buffers. Its low-voltage, ultra-low-power family positioning is useful in compact instruments where energy use and component count matter. USB connectivity can reduce the need for a separate communications controller in appropriately designed products. The device's analog capabilities and maximum clock configuration must be confirmed from the NXP documentation before selecting it for precision signal acquisition.
پیشنهادی
USB-C Enabled Control Module
The MKL17Z64VLH4 can be used in a USB-C-oriented control module when the board requires a compact MCU with native USB connectivity and moderate processing capacity. The 48 MHz Cortex-M0+ processor supports USB stack activity, configuration handling, and application logic, and the 64 KB Flash accommodates a meaningful firmware image for a general-purpose embedded product. The 64-LQFP package offers a straightforward 10 x 10 mm assembly option with ample I/O access for power controls, status LEDs, and external interfaces. USB-C connector orientation, data-role requirements, CC logic, protection devices, and power-delivery requirements must be designed separately from the MCU.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای MKL17Z64VLH4 — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول |
|---|---|
| Brand | NXP Semiconductors |
| Package | 64-LQFP (10 x 10 mm) |
| Processor Core | Arm Cortex-M0+ |
| Maximum CPU Frequency | 48 MHz |
| Flash Memory | 64 KB |
| SRAM | 16 KB |
| Supply Voltage Range | 1.71 V to 3.6 V |
| USB Connectivity | Yes |
| Product Family | Kinetis KL17 |
| RoHS Status | Compliant |
تفاوتهای کلیدی
- Twice the Flash capacity of the related 32 KB KL17 option (در مقابلMKL17Z32VLH4)
- 48 MHz processing capability (در مقابلMKL17Z32VLH4)
- USB connectivity integrated into a compact general-purpose MCU (در مقابلMKL17Z32VLH4)
یادداشتهای طراحی
Route the MKL17Z64VLH4 power and decoupling connections directly from the 64-LQFP footprint according to the NXP hardware design guidance. Place required input, output, and bypass capacitors next to their associated pins, with the shortest possible return path to the ground system. Keep USB data and clock routes away from switching nodes and high-current LED paths, and use the manufacturer's recommended layer stack and controlled-impedance geometry for USB interfaces.
Design the supply around the device's documented 1.71 V to 3.6 V operating range rather than assuming every 3.3 V peripheral can share the same rail. Verify internal-regulator modes, external component values, brownout behavior, and startup sequencing in the NXP data sheet. Keep analog and USB-related supply paths clean, and use the 64 KB Flash and 16 KB SRAM constraints to estimate firmware, bootloader, and working-buffer requirements before finalizing the system partition.
Preserve the exact MKL17Z64VLH4 pin functions in the 64-LQFP symbol and footprint, including reset, clock, debug, USB, power, and ground assignments. Review the exposed pad and thermal or copper requirements associated with the selected package variant. For low-power operation, isolate unused pins according to the manufacturer's guidance and avoid floating inputs. Validate the final assembly against the package drawing because mechanical dimensions and lead geometry are part of the pin-compatibility decision.
اطلاعات انطباق
RoHS compliance is identified by the component listing. No specific REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was confirmed for the exact MPN.