MPC8535AVTANGA - PowerPC e500 MPU 800MHz | NXP | Networking SoC
N.º de pieza: MPC8535AVTANGA ✓ Activo| Cant. | Precio unitario | Total |
|---|---|---|
| 1 | $145 | $145,00 |
| 10 | $132.5 | $1.325,00 |
| 100 | $118.75 | $11.875,00 |
| 500 | $105 | $52.500,00 |
| 1.000 | $92.5 | $92.500,00 |
MPC8535AVTANGA Descripción general
A microprocessor (MPU) is an integrated circuit that contains the arithmetic logic unit, control unit, registers and primary cache memory of a computer system on a single die. Embedded MPUs such as the MPC8535AVTANGA extend this model with on-chip peripherals, security engines and communications controllers so that a system can be built around one chip plus memory and analog components. Within the broader taxonomy, this part sits under the categories microprocessor -> embedded processor -> SoC -> semiconductor. It is a member of the PowerQUICC III family, which evolved PowerQUICC II devices by replacing the CPM with an enhanced QUICC Engine block for line-rate packet processing.
The MPC8535AVTANGA integrates a DDR2/DDR3 memory controller with ECC, a security engine, four GbE MACs with SGMII support, two PCIe controllers, two SATA controllers, USB 2.0 (host/device/OTG), an SDHC controller, dual I2C, DUART, SPI, GPIO and a Local Bus controller. The device implements a high-bandwidth interconnect fabric that links the e500 core, L2 cache and these peripheral blocks. The 783-ball FCPBGA package is a flip-chip ball grid array with 29x29 mm body, requiring controlled-impedance PCB design and BGA assembly capability.
Typical applications include industrial routers and switches, network attached storage (NAS), secure VPN gateways, factory automation controllers, multi-function printers, IP-PBX systems and industrial IoT gateways. The integrated four-port GbE switch and QUICC Engine make the part particularly suited to mid-range networking appliances where deterministic wire-speed forwarding is required alongside a Linux or VxWorks application stack.
When designing with the MPC8535AVTANGA, designers must allocate BGA escape routing on at least 6 inner PCB layers and observe DDR2/DDR3 signal-integrity routing rules including matched-length address/command traces, fly-by topology for clocking, and proper VREF decoupling. Thermal design requires evaluation of the theta_JA value and consideration of airflow for industrial 0 to 90C ambient operation.
This page synthesizes distributor pricing, cross-reference information, and design considerations from the NXP MPC8535 PowerQUICC III datasheet and manufacturer reference documentation, providing practical guidance not found in the standalone datasheet.
Alternativas directas para MPC8535AVTANGA — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con MPC8535AVTANGA (mismo factor de forma y huella) — difiere en Core Architecture, Operating Temperature, Package, RoHS Status, SATA.
Herramienta de comparación rápida — seleccione piezas alternativas para compararlas lado a lado:
MPC8535AVJANGA
✅ Sustitución directa✓ En stock
$66.5 / unidad
Ver hoja de datos →MPC8535EVTANGA
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
MPC8535BVJANGA
✅ Sustitución directa✓ En stock
$95.1 / unidad
Ver hoja de datos →MPC8536CVJAULA
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
MPC8548VJAUJD
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
MPC8535AVTANGA Valores máximos y características eléctricas
| Core Architecture | PowerPC e500 (Book E) |
| Number of Cores | 1 |
| Ancho del bus de datos | 32-bit |
| Frecuencia de reloj máxima | 800 MHz |
| Encapsulado | 783-FCPBGA (29x29 mm) |
| Series | PowerQUICC III (MPC85xx) |
| Memory Interface | DDR2/DDR3 with ECC |
| Ethernet | 4x GbE (SGMII) |
| PCI Express | 2x PCIe controllers |
| SATA | 2x SATA controllers |
| USB | USB 2.0 host/device/OTG |
| Storage | SDHC controller |
| Temperatura de funcionamiento | 0C to +90C (industrial) |
| Tipo de montaje | Surface Mount (BGA) |
| Estado RoHS | Compliant (lead-free) |
Configuración de pines de MPC8535AVTANGA
| Pin A1 | VDD_CORE — Core supply voltage (1.0V typical) |
| Pin B5 | DDR_DQ0 — DDR data bit 0 |
| Pin C10 | GBE_TXD0 — Gigabit Ethernet transmit data 0 (SGMII) |
| Pin D15 | PCIE_TX0_P — PCI Express transmit lane 0 positive |
| Pin E20 | SATA_TX0_P — SATA transmit channel 0 positive |
| Pin F25 | USB_DP — USB 2.0 data plus |
| Pin G29 | SDHC_CLK — SDHC clock output |
| Pin H22 | GPIO15 — General purpose I/O bit 15 |
| Pin J10 | I2C1_SCL — I2C1 clock signal |
| Pin K5 | DUART_TXD1 — DUART transmit data 1 |
| Pin L1 | VSS — Ground reference |
| Pin M15 | SPI_MOSI — SPI master out / slave in |
| Pin N20 | LB_CS0 — Local Bus chip select 0 |
| Pin NC | NC — Not connected (per datasheet - additional balls omitted for brevity; refer to datasheet ball map for complete 783-pin assignment) |
Aplicaciones típicas
MPC8535AVTANGA es adecuado para 7 aplicacións: Industrial Routers and Switches, Network Attached Storage (NAS), Secure VPN Gateways, Factory Automation Controllers, Multi-Function Printers (MFP), IP-PBX and Unified Communications, Industrial IoT Gateways.
Industrial Routers and Switches
The MPC8535AVTANGA is purpose-built for industrial routers and managed switches, integrating four GbE MACs with SGMII support and a hardware-accelerated QUICC Engine for line-rate packet forwarding at 800 MHz. The e500 core executes routing protocols (OSPF, BGP, RIP) and management software while the QUICC Engine handles wire-speed frame classification, NAT and ACL processing without CPU intervention. Dual PCIe controllers allow expansion to additional GbE or 10GbE ports via external PHYs, and the 0 to 90C industrial temperature grade supports deployment in uncontrolled environments such as factory floors and outdoor enclosures.
Recomendado
Network Attached Storage (NAS)
The MPC8535AVTANGA supports mid-range NAS appliances through its dual SATA controllers for direct-attached HDD/SSD connectivity, USB 2.0 for external backup devices, and DDR2/DDR3 memory controller with ECC for reliable file system operation. The 800 MHz e500 core runs the NAS software stack (SMB/NFS protocol servers, RAID management, web UI) while the QUICC Engine accelerates TCP/IP checksum and segmentation offload, improving throughput for CIFS and NFS file transfers. The PCI Express ports enable RAID HBAs or 10GbE uplink cards for higher-end configurations.
Recomendado
Secure VPN Gateways
For VPN gateway applications, the MPC8535AVTANGA provides the e500 host CPU for routing/management functions; the MPC8535EVTANGA drop-in sibling adds the integrated security engine that accelerates 3DES, AES, SHA and IPSec/SSL operations at wire speed across multiple GbE links. Four GbE MACs support WAN/LAN/DMZ segmentation and the QUICC Engine offloads encapsulation/decapsulation. Combined with the 783-FCPBGA package enabling compact 1U appliance designs and 0 to 90C industrial temperature, the MPC8535 family is well-suited for SMB and branch-office VPN concentrators.
Recomendado
Factory Automation Controllers
Factory automation systems leverage the MPC8535AVTANGA's industrial 0 to 90C temperature range, dual PCIe for I/O expansion cards, dual I2C for sensor and actuator interfacing, and deterministic GbE connectivity for SCADA and fieldbus gateway applications. The e500 core runs real-time Linux or VxWorks control stacks while the QUICC Engine handles PROFINET, EtherCAT or Modbus TCP frame processing. The 783-FCPBGA package supports long-term availability and NXP's extended product lifecycle commitment, which is critical for industrial automation equipment with 10+ year deployment cycles.
Recomendado
Multi-Function Printers (MFP)
Multi-function printers and high-end office equipment benefit from the MPC8535AVTANGA's combination of GbE for network connectivity, USB 2.0 host for print job storage and external readers, SATA for HDD-based job spooling, and the e500 core for running print interpreters (PostScript, PCL, PDF) and the scan-to-email/file pipelines. The QUICC Engine handles TCP/IP acceleration for IPP, LPR and raw port printing protocols, freeing the host CPU for raster image processing (RIP) at print engine speeds up to 100 ppm.
Recomendado
IP-PBX and Unified Communications
IP-PBX systems and unified communications appliances deploy the MPC8535AVTANGA for its four GbE ports (LAN/WAN/DMZ/PC), PCI Express for DSP cards or T1/E1 interface modules, USB 2.0 for operator consoles, and the QUICC Engine for RTP/RTCP packet handling with QoS prioritization. The e500 core executes the call control software (Asterisk, FreeSWITCH or proprietary PBX firmware) while the security engine option (MPC8535EVTANGA) accelerates SRTP/TLS for encrypted voice. The 0 to 90C industrial temperature supports installation in telecom closet environments.
Recomendado
Industrial IoT Gateways
Industrial IoT gateways leverage the MPC8535AVTANGA's multi-protocol connectivity: four GbE ports aggregate edge sensors and cameras, dual PCIe accommodates wireless modems (LTE/5G) or additional serial cards, USB 2.0 supports local configuration and diagnostics, and SDHC enables local data buffering during network outages. The e500 core runs edge analytics and protocol translation (MQTT, CoAP, OPC-UA) while the QUICC Engine offloads TLS/DTLS handshake acceleration. Industrial temperature rating and NXP's long-term supply program make it suitable for IIoT deployments requiring 7-10 year field life.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para MPC8535AVTANGA — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | MPC8535AVJANGA | MPC8535EVTANGA | MPC8535BVJANGA | MPC8536CVJAULA | MPC8548VJAUJD |
|---|---|---|---|---|---|---|
| Package | 783-FCPBGA (29x29 mm) | 783-FCPBGA (29x29 mm) - same | 783-FCPBGA (29x29 mm) - same | 783-FCPBGA (29x29 mm) - same | 783-FCPBGA (29x29 mm) - same | 783-FCPBGA (29x29 mm) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core Architecture | PowerPC e500 | PowerPC e500 | PowerPC e500 | PowerPC e500 | PowerPC e500 | PowerPC e500 |
| Security Engine | No (non-E variant) | No | Yes (AES/3DES/SHA/IPSec) | No | Yes | Yes |
Diferenciadores clave
- Integrated QUICC Engine for hardware-accelerated packet processing (frente a Generic ARM9/ARM11 MPU without dedicated networking accelerator)
- Four integrated GbE MACs versus external PHY requirement (frente a MPC8535 competitors requiring external GbE switch ASIC)
- Drop-in compatibility within the same 783-FCPBGA footprint (frente a MPC8535EVTANGA (security engine variant))
- Industrial 0 to 90C temperature range and long-term NXP supply program (frente a Commercial 0 to 70C MPUs requiring industrial SKU variants)
Notas de diseño
The 783-FCPBGA package at 29x29 mm requires at least a 6-layer PCB with BGA escape routing. Inner layers 2 and 5 should be dedicated ground planes for return-path integrity; inner layers 3 and 4 used for signal escape routing. DDR2/DDR3 traces must use matched-length routing within +/- 25 mils, with the address/command group routed in fly-by topology with discrete VTT termination at the end. Via-in-pad with filled and plated-over vias is recommended for the BGA break-out region to allow trace escape between adjacent pads.
The 783-FCPBGA package has a typical theta_JA in the range of 8 to 12 C/W depending on PCB design (per JEDEC EIA/JESD51 family). For 0 to 90C industrial operation at 800 MHz with all peripherals active, designers must characterize junction temperature under worst-case load. Estimated: at typical 5W to 8W dissipation with JEDEC-standard 4-layer PCB, junction rise above ambient is approximately 40 to 96 C, requiring either reduced VDD_CORE, lower peripheral utilization, or forced airflow for high-ambient installations above 70 C.
The MPC8535AVTANGA requires multiple voltage rails: VDD_CORE (1.0V typical), VDD_DDR (1.8V for DDR2 or 1.5V for DDR3), VDD_PLAT (1.0V), and VDD_IO (3.3V for peripheral interfaces). Power-on reset sequencing must follow the datasheet-specified order with VDD_CORE stable before VDD_IO ramps, and VDD_DDR must be present before DDR2/DDR3 initialization. Use NXP-recommended PMIC companions (or design with discrete LDOs) to ensure monotonic ramp and proper POR behavior.
Route high-speed differential pairs (PCIe, SATA, SGMII, USB) with 85 ohm differential impedance, length-matched within +/- 5 mils for PCIe and +/- 10 mils for SATA. Place AC-coupling capacitors for PCIe and SATA at the transmitter side as close to the BGA ball as the escape allows. Maintain a continuous ground reference under all high-speed traces; avoid splitting the ground plane beneath the BGA break-out. Use ground stitching vias every 200 mils along the edges of differential pair regions.
Common pitfalls when designing with the MPC8535AVTANGA include: (1) failing to initialize DDR2/DDR3 calibration via the SPD EEPROM contents before first boot, (2) neglecting the JTAG TAP controller boundary-scan requirement for production testing, (3) leaving reserved balls floating instead of connecting them to ground per the datasheet, (4) ignoring the QUICC Engine firmware download requirement at boot, and (5) over-specifying PCIe reference clock tolerance when the on-die PLL already meets the standard. Review the NXP hardware design checklist document before layout finalization.
Información de cumplimiento
RoHS compliant per DigiKey product listing. AEC-Q100 not applicable - this is a networking SoC, not an automotive-qualified part. Not recommended for automotive safety applications.