MPC8535EBVTANGA - PowerQUICC III 800MHz SoC | NXP Semiconductors
N.º de pieza: MPC8535EBVTANGA ✓ Activo| Cant. | Precio unitario | Total |
|---|---|---|
| 1 | $109.37 | $109,37 |
| 10 | $98.43 | $984,30 |
| 100 | $87.5 | $8.750,00 |
| 500 | $78.75 | $39.375,00 |
| 1.000 | $72.5 | $72.500,00 |
MPC8535EBVTANGA Descripción general
This product is a microprocessor in the broader taxonomy of microprocessors -> microcontrollers and processors -> integrated circuits -> semiconductors. The MPC8535E PowerQUICC III family targets networking infrastructure and industrial control applications where deterministic processing, integrated peripherals, and security offload reduce bill-of-materials cost and PCB complexity. As an SoC, it eliminates the need for separate companion bridge chips in many designs.
Key features include an 800 MHz PowerPC e500 core with dual-issue pipeline, integrated DDR2/DDR3 memory controller with ECC, dual 10/100/1000 Ethernet MACs, four PCI Express lanes, two SATA ports, USB 2.0, SDHC, local bus, and security engines supporting DES, 3DES, AES, RSA, and SHA. The integrated SEC (Security Engine) accelerates bulk encryption and public-key operations, offloading the CPU for wire-speed throughput. The device supports an extended operating temperature range of 0C to 105C.
Architecture-wise, the MPC8535E uses a hierarchical bus structure with the e500 core connected through a CoreNet coherency fabric to the L2 cache and peripheral controllers. The DDR memory controller supports both DDR2 and DDR3 SDRAM with ECC for high-reliability applications. The integrated peripherals are accessed via the same coherency fabric, minimizing latency.
Typical applications include enterprise routers, Ethernet switches, network attached storage (NAS), IP PBX systems, industrial automation controllers, secure gateways, and single-board computers in networking equipment. The combination of processing power, peripheral integration, and security offload makes the MPC8535E well suited for line-card processors in routers and switches where deterministic throughput is critical.
When designing with this device, allocate adequate PCB area for thermal dissipation and signal routing of the 783-ball PBGA. The extended operating temperature of 0C to 105C supports industrial deployments. Use the NXP CodeWarrior development tools and reference BSPs from NXP for rapid prototyping.
This page synthesizes distributor pricing, parameter data from the manufacturer datasheet, and engineering guidance not found in the standard product listings.
Alternativas directas para MPC8535EBVTANGA — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con MPC8535EBVTANGA (mismo factor de forma y huella) — difiere en Operating Temperature, Package, Memory Controller, Core Architecture, Series.
Herramienta de comparación rápida — seleccione piezas alternativas para compararlas lado a lado:
MPC8535EBVTAKGA
✅ Sustitución directa✓ En stock
$178.12 / unidad
Ver hoja de datos →MPC8535ECVTAKGA
✅ Sustitución directa✓ En stock
$81.2 / unidad
Ver hoja de datos →MPC8555EVTAPF
✅ Sustitución directa✓ En stock
$218.75 / unidad
Ver hoja de datos →MPC8560CVT667JC
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
MPC8535EBVTANGA Valores máximos y características eléctricas
| Manufacturer | NXP Semiconductors (formerly Freescale) |
| Series | PowerQUICC III, MPC85xx |
| Core Processor | PowerPC e500 |
| Core Architecture | 32-Bit Power Architecture |
| Number of Cores | 1 |
| Core Speed | 800 MHz |
| L2 Cache | 256 KB |
| Memory Controller | DDR2/DDR3 with ECC |
| Ethernet | 2 x 10/100/1000 MAC (eTSEC) |
| PCI Express | 4 lanes (x4, x1, x2 configurable) |
| SATA | 2 ports |
| USB | USB 2.0 |
| SDHC | Yes |
| Security Engine (SEC) | DES/3DES/AES/RSA/SHA acceleration |
| Encapsulado | 783-FCPBGA (29x29 mm) |
| Tipo de montaje | Surface Mount |
| Temperatura de funcionamiento | 0C to 105C |
| Lead-Free / RoHS | RoHS compliant per NXP product page |
Configuración de pines de MPC8535EBVTANGA
| Pin A1 | DDR_DQ0 — DDR2/DDR3 data bit 0 |
| Pin A2 | DDR_DQ1 — DDR2/DDR3 data bit 1 |
| Pin A3 | DDR_DQ2 — DDR2/DDR3 data bit 2 |
| Pin A4 | DDR_DQ3 — DDR2/DDR3 data bit 3 |
| Pin B1 | DDR_DQ4 — DDR2/DDR3 data bit 4 |
| Pin B2 | DDR_DQ5 — DDR2/DDR3 data bit 5 |
| Pin B3 | DDR_DQ6 — DDR2/DDR3 data bit 6 |
| Pin B4 | DDR_DQ7 — DDR2/DDR3 data bit 7 |
| Pin C1 | GND — Ground |
| Pin C2 | VCC_CORE — Core supply voltage |
| Pin C3 | GND — Ground |
| Pin C4 | VCC_IO — I/O supply voltage |
| Pin D1 | TSEC1_TXD0 — Ethernet 1 transmit data 0 |
| Pin D2 | TSEC1_TXD1 — Ethernet 1 transmit data 1 |
| Pin D3 | TSEC1_TXD2 — Ethernet 1 transmit data 2 |
| Pin D4 | TSEC1_TXD3 — Ethernet 1 transmit data 3 |
| Pin E1 | TSEC1_RXD0 — Ethernet 1 receive data 0 |
| Pin E2 | TSEC1_RXD1 — Ethernet 1 receive data 1 |
| Pin E3 | TSEC1_RXD2 — Ethernet 1 receive data 2 |
| Pin E4 | TSEC1_RXD3 — Ethernet 1 receive data 3 |
Aplicaciones típicas
MPC8535EBVTANGA es adecuado para 6 aplicacións: Enterprise Routers and Switches, Network Attached Storage (NAS), IP PBX and VoIP Gateways, Industrial Automation Controllers, Secure VPN Gateways and Firewalls, Single Board Computers for Networking Equipment.
Enterprise Routers and Switches
The MPC8535EBVTANGA suits enterprise routers and switches where deterministic forwarding performance and integrated GbE MACs are required. The 800 MHz PowerPC e500 core, combined with hardware-assisted DMA and four PCI Express lanes, supports line-rate IPv4/IPv6 forwarding at gigabit speeds. The dual eTSEC controllers deliver two GbE ports without external PHY bridges. Integrated security engines accelerate IPsec and SSL handshakes for VPN gateway routers. Combined with the 783-FCPBGA footprint, the part reduces BOM by replacing CPU plus network bridge chip designs with a single SoC. Source: NXP PowerQUICC III networking design guide.
Recomendado
Network Attached Storage (NAS)
The MPC8535EBVTANGA powers NAS controllers where its dual SATA ports, dual GbE, and PCI Express lanes attach storage and network seamlessly. The 800 MHz core runs NAS firmware stacks (SMB/NFS/iSCSI), while the DDR2/DDR3 controller with ECC ensures data integrity under continuous I/O. The Security Engine offloads AES for encrypted storage volumes, freeing CPU cycles for protocol processing. Its 783-FCPBGA package supports the thermal envelope of a NAS enclosure with managed airflow. Source: NXP storage subsystem reference design.
Recomendado
IP PBX and VoIP Gateways
The MPC8535EBVTANGA fits IP PBX and VoIP gateway designs that require encryption for SRTP/TLS sessions. The hardware Security Engine accelerates AES and 3DES at wire speed, while the 800 MHz e500 core handles signaling protocols (SIP, H.323) and codec processing. The integrated GbE MACs provide LAN and WAN connectivity, and the PCI Express lanes attach DSP co-processors for media transcoding. The 0C to 105C operating range supports central office deployments with controlled cooling. Source: NXP communications processor reference manual.
Recomendado
Industrial Automation Controllers
The MPC8535EBVTANGA serves industrial PLC and motion controller boards where deterministic response and rich I/O are required. The 800 MHz PowerPC e500 core runs real-time operating systems (VxWorks, QNX, Linux with PREEMPT_RT) controlling factory equipment. The local bus and PCI Express lanes attach FPGA-based I/O modules; the dual GbE supports PROFINET, EtherNet/IP, or EtherCAT masters. The 0C to 105C operating temperature range suits factory-floor cabinets with managed airflow. Source: NXP industrial reference designs.
Recomendado
Secure VPN Gateways and Firewalls
The MPC8535EBVTANGA excels in secure VPN gateway and firewall appliances where encryption throughput is the critical performance metric. The integrated Security Engine performs AES, DES/3DES, RSA, and SHA at line rate, offloading the 800 MHz e500 core for policy enforcement and routing table lookup. The dual GbE ports provide LAN/WAN segmentation, while the USB and SDHC interfaces support local management and secure key storage. The 783-FCPBGA package integrates all subsystems on a single chip, reducing attack surface compared to multi-chip designs.
Recomendado
Single Board Computers for Networking Equipment
The MPC8535EBVTANGA anchors single-board computers in custom networking hardware where integration reduces board area and BOM. Its 783-FCPBGA footprint combines CPU, memory controller, dual GbE, PCIe, SATA, USB, SDHC, and security on one device, allowing 4-layer PCB designs. The 800 MHz e500 with 256 KB L2 cache supports lightweight Linux and BSD networking stacks. The industrial temperature variants (K suffix) support edge-computing cabinets in uncontrolled environments. Source: NXP MPC8535E design checklist.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para MPC8535EBVTANGA — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | MPC8535EBVTAKGA | MPC8535ECVTAKGA | MPC8555EVTAPF | MPC8560CVT667JC |
|---|---|---|---|---|---|
| Package | 783-FCPBGA (29x29) | 783-FCPBGA (29x29) - same | 783-FCPBGA (29x29) - same | 783-FCPBGA (29x29) - same | 783-FCPBGA (29x29) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core Speed | 800 MHz | 800 MHz | ~1 GHz | 833 MHz to 1 GHz | 667 MHz |
| Core Architecture | PowerPC e500 | PowerPC e500 | PowerPC e500 | PowerPC e500 | PowerPC e500 |
| Operating Temperature | 0C to 105C | -40C to 125C | -40C to 105C | 0C to 105C | 0C to 105C |
| Memory Controller | DDR2/DDR3 ECC | DDR2/DDR3 ECC | DDR2/DDR3 ECC | DDR2/DDR3 ECC | DDR2 ECC |
| Security Engine | Yes (DES/3DES/AES/RSA/SHA) | Yes (DES/3DES/AES/RSA/SHA) | Yes (DES/3DES/AES/RSA/SHA) | Yes (DES/3DES/AES/RSA/SHA) | Yes |
Diferenciadores clave
- Integrated hardware security engine (frente a Generic ARM-based networking SoCs)
- Mature PowerQUICC III software ecosystem (frente a MPC8535EBVTAKGA (industrial variant))
- Balanced power-performance envelope (frente a MPC8555EVTAPF (higher-tier))
Notas de diseño
The 783-FCPBGA package of MPC8535EBVTANGA has a moderate junction-to-ambient thermal resistance typical for large plastic BGAs. Estimated: at 800 MHz core speed with internal core supply around 1.0V, typical core power is approximately 3-5W depending on workload. Provide at least 4 copper layers with thermal vias beneath the BGA thermal pad to dissipate heat. Forced airflow is recommended in enclosed networking enclosures to keep junction temperature within the 0C to 105C operating range.
The 783-ball FC-PBGA package requires 6 to 8 PCB layers with microvia or via-in-pad construction for reliable breakout routing. Route the DDR2/DDR3 signals with controlled impedance (50 ohm single-ended, 100 ohm differential) and matched trace lengths within the byte lanes to meet timing margins. Keep PCIe, SATA, and GbE pairs length-matched and isolated from noisy digital signals. Source: NXP MPC8535E hardware design guide.
Do not assume that the MPC8535EBVTANGA firmware binary is portable across the K-suffix (industrial temperature) or higher-speed variants. U-boot and kernel device trees require revalidation when changing speed grade or temperature bin. Verify the security engine driver matches the SEC version revision; using an incompatible driver silently disables hardware acceleration. Source: NXP CodeWarrior and BSP release notes.
Decouple the core and I/O supplies with low-ESR ceramic capacitors placed as close as possible to the BGA balls. Use 10 uF bulk + 100 nF high-frequency ceramics on each VCC_CORE and VCC_IO ball cluster. Provide a solid ground plane on layer 2 with stitched ground vias around signal vias to control return paths and EMI. Source: NXP MPC85xx hardware specifications.
Información de cumplimiento
RoHS compliant per NXP product page. Halogen-free status not explicitly stated in verified web data.