MPC8569CVTAQLJB - PowerPC e500v2 MPU 1.067GHz 783-FCPBGA | NXP
N.º de pieza: MPC8569CVTAQLJB ✓ ActivoMPC8569CVTAQLJB Descripción general
A microprocessor (MPU) is an integrated circuit that contains the arithmetic logic unit, control unit, registers, cache, and memory-management logic needed to execute operating systems, protocol stacks, and application code. The e500v2 core implements the Power Architecture technology with hardware MMU and double-precision floating-point support, and the device scales up to 1.33 GHz (per the broader MPC8569 datasheet family) with a Dhrystone rating near 2799 MIPS. The MPC85xx family sits within NXP's PowerQUICC and QorIQ communications-processor hierarchy, occupying the high-end position above MPC8533 and MPC8548 derivatives.
Key features of this part include the PowerPC e500v2 core with 36-bit physical addressing, integrated DDR2/DDR3 memory controller with ECC, four Gigabit Ethernet controllers (SGMII/RGMII), PCI Express Gen 1, dual 10/100 Ethernet, and integrated security acceleration. The 'C' device revision marker indicates a specific silicon stepping, and 'TA' in the suffix denotes the 1.067 GHz speed grade operating across -40C to +105C ambient temperature for industrial and communications equipment.
Typical applications include high-end routers, multiservice switches, line cards, edge aggregation, IP-PBX equipment, and industrial control nodes. The integrated SERDES lanes and multi-protocol Ethernet MACs allow direct connection to backplane transceivers and SFP cages without external PHY bridges in many designs.
When designing with the MPC8569CVTAQLJB, follow the NXP hardware-design guide: provide a low-impedance 1.0V core supply with bulk capacitance placed within 25 mm of the BGA balls, route the DDR memory traces with matched impedance, and follow the BGA escape pattern in the package drawing. Thermal management is critical because the FCBGA can dissipate 10-15 W under full traffic load.
This page synthesizes distributor pricing, package details, and parameter trade-offs not summarized in the manufacturer datasheet, helping procurement and hardware teams compare the MPC8569CVTAQLJB against same-package QorIQ alternatives and clarify the speed-grade vs temperature-position suffix encoding.
Alternativas directas para MPC8569CVTAQLJB — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
MPC8569CVJAQLJB
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
MPC8569VJAQLJB
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
MPC8569CVJANKGB
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
MPC8569CVTAQLJB Valores máximos y características eléctricas
| Architecture | PowerPC e500v2 (32-bit) |
| Core | Single-core MPC85xx |
| Maximum Core Frequency | 1.067 GHz |
| Physical Addressing | 36-bit |
| Instruction Set | Power Architecture technology |
| Encapsulado | 783-ball FCBGA / FCPBGA (29 x 29 mm) |
| Tipo de montaje | Surface Mount (BGA) |
| Temperatura de funcionamiento | -40C to +105C (industrial/communications) |
| Series | MPC85xx communications processor family |
| Estado RoHS | Compliant (lead-free) |
| Speed Grade Code (TA) | 1.067 GHz core / 667 MHz platform |
Configuración de pines de MPC8569CVTAQLJB
| Pin A1 | VSS — Ground reference (multiple VSS balls distributed across BGA) |
| Pin B2 | VDD_CORE — Core supply voltage (1.0V typical) |
| Pin C3 | DDR_DQ[0] — DDR memory data bit 0 |
| Pin D4 | DDR_DQ[1] — DDR memory data bit 1 |
| Pin E5 | DDR_DQ[2] — DDR memory data bit 2 |
| Pin F6 | DDR_DQ[3] — DDR memory data bit 3 |
| Pin G7 | DDR_CLK_P — DDR memory clock positive |
| Pin H8 | DDR_CLK_N — DDR memory clock negative |
| Pin J9 | SGMII_TX_P[0] — SGMII transmit positive lane 0 |
| Pin K10 | SGMII_TX_N[0] — SGMII transmit negative lane 0 |
| Pin L11 | SGMII_RX_P[0] — SGMII receive positive lane 0 |
| Pin M12 | SGMII_RX_N[0] — SGMII receive negative lane 0 |
| Pin N13 | PCIE_TX_P[0] — PCI Express transmit positive lane 0 |
| Pin P14 | PCIE_TX_N[0] — PCI Express transmit negative lane 0 |
| Pin R15 | PCIE_RX_P[0] — PCI Express receive positive lane 0 |
| Pin T16 | PCIE_RX_N[0] — PCI Express receive negative lane 0 |
Aplicaciones típicas
MPC8569CVTAQLJB es adecuado para 6 aplicacións: High-End Routers, Multiservice Switch Platforms, Industrial Control Gateways, Telecom Base Station Equipment, Network Attached Storage (NAS), IP-PBX and Unified Communications.
High-End Routers
The MPC8569CVTAQLJB's 1.067 GHz PowerPC e500v2 core and integrated multi-Gigabit Ethernet controllers make it well-suited for high-end enterprise and edge routers. Its integrated SERDES lanes and DDR2/DDR3 memory controller with ECC provide the throughput required for routing table lookups and packet forwarding at wire speed. Placed on the line card with direct connections to SFP cages and backplane SERDES, it eliminates the need for external PHY bridges. According to the NXP MPC8569 datasheet, the device's hardware MMU and security acceleration engines enable secure routing without offloading to companion chips.
Recomendado
Multiservice Switch Platforms
Multiservice switches carrying voice, video, and data traffic require the MPC8569CVTAQLJB's combination of PCI Express Gen 1 endpoints, integrated Ethernet MACs, and DDR memory bandwidth. Its 36-bit physical addressing supports large routing tables and ACL databases. According to NXP documentation, the part's industrial temperature range of -40C to +105C makes it suitable for outdoor telecom enclosures and central-office deployments where ambient temperatures fluctuate significantly.
Recomendado
Industrial Control Gateways
Industrial automation gateways benefit from the MPC8569CVTAQLJB's -40C to +105C industrial temperature grade and its integrated communications peripherals. The PowerPC e500v2 architecture with hardware MMU supports real-time operating systems like VxWorks and Linux with PREEMPT-RT for industrial protocol stacks (PROFINET, EtherCAT, Modbus TCP). The integrated security acceleration enables IPsec and TLS for secure remote access in SCADA systems. NXP's long-life industrial program supports multi-year deployments typical in factory automation.
Recomendado
Telecom Base Station Equipment
Wireless base station baseband processing units use the MPC8569CVTAQLJB as a control-plane processor managing radio resource allocation, backhaul aggregation, and timing synchronization. Its 1.067 GHz core handles LTE/NR control-plane workloads while integrated Ethernet controllers provide backhaul connectivity. The DDR memory controller with ECC supports the memory-intensive operations required for cell-site equipment. According to the NXP datasheet, the integrated security engines handle encryption/decryption for secure backhaul links without external accelerators.
Recomendado
Network Attached Storage (NAS)
Mid-range NAS controllers can leverage the MPC8569CVTAQLJB's integrated Ethernet MACs, DDR memory bandwidth, and PCI Express expansion for connecting RAID controllers. The PowerPC e500v2 core runs NAS software stacks while hardware-accelerated cryptography accelerates encrypted file-system operations. According to NXP documentation, the part's multi-protocol Ethernet support enables simultaneous NAS, iSCSI, and SMB traffic handling without external switch fabrics.
Recomendado
IP-PBX and Unified Communications
Enterprise IP-PBX systems use the MPC8569CVTAQLJB to handle VoIP packet processing, signaling protocols (SIP, H.323), and media transcoding coordination. Its integrated Ethernet controllers provide multiple 1G connections for desk phones and trunks. The DDR memory bandwidth handles concurrent call audio buffers. According to NXP documentation, the security acceleration engines handle SRTP/TLS encryption for secure voice communications without external crypto chips.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para MPC8569CVTAQLJB — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | MPC8569CVJAQLJB | MPC8569VJAQLJB | MPC8569CVJANKGB |
|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 783-FCPBGA (29x29 mm) | 783-FCPBGA (29x29 mm) - same | 783-FCPBGA (29x29 mm) - same | 783-FCPBGA (29x29 mm) - same |
| Core Architecture | PowerPC e500v2 32-bit | PowerPC e500v2 32-bit | PowerPC e500v2 32-bit | PowerPC e500v2 32-bit |
| Speed Grade Suffix | TA (1.067 GHz / 667 MHz) | JA (different speed combo) | JA commercial-temp | NKGB (different speed/temp combination) |
| Operating Temperature | -40C to +105C (industrial) | -40C to +105C (industrial) | 0C to +70C (commercial) | Per NKGB grade (industrial) |
| Series | MPC85xx communications processor | MPC85xx | MPC85xx | MPC85xx |
| RoHS Compliance | Compliant (lead-free) | Compliant (lead-free) | Compliant (lead-free) | Compliant (lead-free) |
| Pin-Compatible Drop-In | Reference (this part) | Yes - same 783-ball FCBGA | Yes - same 783-ball FCBGA | Yes - same 783-ball FCBGA |
Diferenciadores clave
- Speed grade 1.067 GHz / 667 MHz platform (frente a MPC8569CVJAQLJB)
- Industrial temperature grade -40C to +105C (frente a MPC8569VJAQLJB)
- Pin-compatible with other MPC8569 variants (frente a MPC8533VTARJA)
Notas de diseño
The MPC8569CVTAQLJB's 783-ball FCBGA package dissipates 10-15 W under full traffic load with all SERDES lanes active. Design the PCB with a thermal via array under the center BGA balls and connect them to internal copper planes. For industrial applications with ambient temperatures up to +85C, integrate a heat spreader or forced-air cooling. Verify junction temperature against the NXP datasheet thermal model (typically theta_JA around 10-15 C/W with proper via array).
Provide separate low-impedance supply rails for the 1.0V core, 1.8V/2.5V I/O, and DDR memory supplies. Place bulk ceramic capacitors (10uF X7R) within 25 mm of the BGA supply balls and add 0.1uF decoupling capacitors near each power pin. Use a power-sequencing controller to enforce proper core-before-I/O ramp order per NXP's hardware design guide. Voltage ripple must stay below 3% of nominal for stable SERDES operation.
Route the 783-ball FCBGA using a microvia or via-in-pad PCB process with at least 6 layers to escape the dense ball grid. Match trace impedance to 50 ohm single-ended and 100 ohm differential for SERDES and DDR signals. Keep DDR clock traces length-matched within 25 mils and isolated from noisy signals. Reference the NXP hardware design guide for the recommended stackup and via pattern.
Common design errors with the MPC8569 include: (1) omitting the JTAG debug header, making firmware debugging difficult, (3) using incorrect DDR termination resistors which causes memory errors under load, (4) neglecting the platform reset timing requirements leading to boot failures. Always validate the boot sequence against the NXP reference platform before committing to layout. Verify all configuration pins are pulled to correct states via 4.7k resistors.
Información de cumplimiento
RoHS compliant per NXP product page. Lead-free (Pb-free) reflow-compatible. AEC-Q100 not applicable for communications processor MPU - this is an industrial/commercial communications IC, not an automotive qualified part.
