Texas Instruments

MSP430F5325IPN - 25MHz 64KB Flash Mixed-Signal MCU | Texas Instruments

N.º de pieza: MSP430F5325IPN ✓ Activo
80-pin LQFP (PN), 12 x 12 mm Package 25 MHz Speed 64 KB Memory
MOQ: 1 |

MSP430F5325IPN Descripción general

The Texas Instruments MSP430F5325IPN is a 25 MHz mixed-signal microcontroller with 64 KB of Flash memory, 6 KB of SRAM, and an 80-pin LQFP (PN) package. It integrates a 12-bit ADC, comparator, DMA controller, two USCIs, UART/SPI/I2C interfaces, and a hardware multiplier, while the MSP430F5325 family provides 63 I/O pins, four 16-bit timers, an integrated 3.3 V LDO, and an RTC with alarm capabilities.

A mixed-signal microcontroller combines a digital processor with analog measurement or control peripherals on one device. In the broader semiconductor hierarchy, the MSP430F5325 belongs to the mixed-signal MCU class, then the 16-bit MCU category, and ultimately the embedded microcontroller and semiconductor families. Its MSP430 CPU architecture uses 16-bit registers and a RISC-based instruction set designed for efficient control-oriented software.

The principal advantages are the 25 MHz operating frequency, 64 KB Flash program memory, and 6 KB SRAM. The 12-bit ADC supports analog measurement, the comparator provides a lower-power threshold-detection option, and DMA permits peripheral transfers without continuous processor intervention. Two USCIs expand serial connectivity, with UART, SPI, and I2C functions identified for this device.

The MSP430F5325 family combines four 16-bit timers with an RTC and alarm capability, making it suitable for periodic sensing, event timing, and low-duty-cycle control. A hardware multiplier accelerates arithmetic operations that are common in control, measurement, and signal-processing firmware. The integrated 3.3 V LDO simplifies supply architecture when the operating and external interface requirements are compatible with that internal rail.

Typical uses include industrial sensor acquisition, building and automation controllers, energy measurement instruments, low-power data loggers, communications equipment, and battery-operated monitoring systems. The 63 available I/O pins allow multiple sensors, actuators, indicators, and serial interfaces to be connected while preserving a moderate integration level rather than using several discrete components.

Designers should confirm every peripheral multiplexing, voltage-domain constraint, pin-function alternative, and package connection from the manufacturer datasheet before laying out the PCB. The 80-pin LQFP footprint requires careful escape routing, and mixed-signal designs should separate sensitive ADC inputs from switching nodes and digital return currents.

This page combines the manufacturer feature set, package and memory information, exact-MPN pricing evidence, application guidance, and package-compatible family options. It also distinguishes confirmed drop-in options from candidates that require firmware, memory, and peripheral revalidation before production release.

Alternativas directas para MSP430F5325IPN — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con MSP430F5325IPN (mismo factor de forma y huella) — difiere en Hardware Multiplier, SRAM.

Texas Instruments
Hardware Multiplier: 16 x 16 -> 32-bit, single cycle
SRAM: 10 KB
Comparar con MSP430F5325IPN →

MSP430F5329IPN

✅ Sustitución directa ⚠️ Especificaciones sin verificar
Texas Instruments
📦 80-LQFP (PN, 12 x 12 mm)
MSP430 CPUXV2 (16-bit RISC) · 25 MHz · 128 KB (128K x 8) · 10 KB · 2.4 V to 3.6 V · -40C to +85C (Industrial) · 12-bit SAR, up to 200 ksps · Yes (on-chip)

Consulte el precio

Ver hoja de datos →

MSP430F5327IPN

✅ Sustitución directa ⚠️ Especificaciones sin verificar
📦 80-LQFP (PN, 12 x 12 mm)
25 MHz operating frequency matches the target by 0%; Flash and SRAM configuration must be validated before firmware reuse.

📋 Alternativa de referencia (no en el catálogo)

MSP430F5325IPN Valores máximos y características eléctricas

CPU Architecture 16-bit MSP430 RISC
Frecuencia de reloj máxima 25 MHz
Flash Memory 64 KB
SRAM 6 KB
ADC Resolution 12 bit
Comparator Integrated
DMA Controller Integrated
UART Integrated
SPI Integrated
I2C Integrated
USCI Count 2
Hardware Multiplier Integrated
Timer Count 4 x 16-bit
Real-Time Clock Integrated with alarm capability
Internal LDO 3.3 V
I/O Pin Count 63
Encapsulado 80-pin LQFP (PN), 12 x 12 mm
Tipo de montaje Surface mount

Guía de configuración de pines de MSP430F5325IPN 80-pin lqfp (pn), 12 x 12 mm

Configuración de pines para MSP430F5325IPN (encapsulado 80-pin lqfp (pn), 12 x 12 mm). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.

Diagrama de patillaje del encapsulado 80-pin lqfp (pn), 12 x 12 mm para MSP430F5325IPN

No hay datos detallados de patillaje disponibles para MSP430F5325IPN.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

MSP430F5325IPN es adecuado para 6 aplicacións: Industrial Sensor Acquisition, Low-Power Data Logger, Building Automation Controller, Energy Measurement Instrument, Communications Gateway, Battery-Operated Monitoring System.

🏭

Industrial Sensor Acquisition

MSP430F5325IPN fits industrial sensor acquisition because its 12-bit ADC, comparator, four 16-bit timers, and 63 I/O pins provide enough resources for multiple analog and digital inputs without requiring separate interface chips. At 25 MHz, the MCU can service control logic while DMA transfers data between peripherals and the 6 KB SRAM. Two USCIs support UART, SPI, or I2C sensor links. The 64 KB Flash accommodates acquisition firmware, calibration tables, and protocol handlers. In a deployed measurement system, place the analog section near the ADC inputs, follow the datasheet source-impedance and filtering requirements, and reserve timer outputs for excitation or trigger timing.

🧩

Low-Power Data Logger

The MSP430F5325IPN supports low-power data logging through its MSP430 control architecture, integrated timers, RTC alarm capability, and low-duty-cycle sensor interfaces. The 64 KB Flash provides space for firmware and logged event information, while the 6 KB SRAM can hold active measurement batches before storage. DMA can move peripheral data without requiring the CPU to supervise every transfer, and the comparator can support threshold-based wake events. The two USCIs allow a local flash or communications peripheral to operate alongside the ADC. Battery-operated designs should use the datasheet's clocking, port-state, and sleep-mode guidance to minimize current draw.

🏭

Building Automation Controller

MSP430F5325IPN can serve as a building-automation controller where a design combines analog monitoring with digital I/O, timers, and serial communications. Its 63 I/O pins allow inputs from temperature, occupancy, pressure, or flow sensors and outputs for indicators or actuator interfaces. Four 16-bit timers support periodic sampling and output timing, while the RTC and alarm functions enable scheduled operations. The 25 MHz CPU and 64 KB Flash are suitable for protocol stacks, state machines, and local filtering. During hardware design, assign multiplexed functions from the pin table, observe power-domain restrictions, and route high-switching-current outputs away from sensitive analog inputs.

⚡

Energy Measurement Instrument

MSP430F5325IPN is suitable for energy-measurement instrumentation because it combines a 12-bit ADC, comparator, hardware multiplier, DMA, and two configurable serial communication interfaces. The ADC can acquire voltage-derived signals, the comparator can provide fast threshold detection, and the hardware multiplier assists arithmetic used in scaling and calibration calculations. Four timers can organize sampling and communication periods, while 64 KB Flash stores fixed-point routines, calibration data, and communications code. The 6 KB SRAM limits simultaneous buffering, so define DMA transfer sizes carefully. Follow the datasheet's ADC acquisition, reference, and analog-input recommendations to maintain repeatable measurements.

🌐

Communications Gateway

MSP430F5325IPN can be used in a small communications gateway that must combine local control, protocol conversion, and analog supervision. Its two USCIs provide UART, SPI, or I2C connectivity, while DMA supports efficient movement of serial or peripheral data through the 6 KB SRAM. At 25 MHz, the 16-bit MSP430 CPU can manage framing, checksums, configuration, and supervisory logic. The 64 KB Flash is sufficient for compact gateway firmware, although larger protocol stacks or buffered traffic may require a different MCU configuration. Validate serial pin multiplexing and interrupt priorities in the device documentation, and use independent protection for externally accessible communication lines.

📱

Battery-Operated Monitoring System

MSP430F5325IPN fits battery-operated monitoring systems that periodically measure analog conditions and transmit results through a serial link. Its RTC with alarm capability supports time-based sampling, while the comparator can generate an event when a monitored signal crosses a threshold. The 25 MHz CPU handles acquisition sequencing and protocol formatting, and DMA reduces processor involvement during peripheral transfers. The integrated 3.3 V LDO can simplify internal rail generation where the system supply and external interface levels meet its operating requirements. Confirm the complete supply and I/O voltage ranges in the manufacturer datasheet, disable unused peripherals, and select the lowest suitable clock and sleep configuration for the duty cycle.

Resumen de productos recomendados

MSP430F5325IPN.Z Orderable green-package designation listed for the target device Se usa en: Industrial Sensor Acquisition, Building Automation Controller, Battery-Operated Monitoring System MSP430F5329IPN Texas Instruments Se usa en: Industrial Sensor Acquisition, Building Automation Controller, Energy Measurement Instrument, Communications Gateway MSP430F5325IPN Texas Instruments Se usa en: Low-Power Data Logger, Communications Gateway MSP430F5327IPN Same-family controller option for memory assessment Se usa en: Low-Power Data Logger, Energy Measurement Instrument, Battery-Operated Monitoring System
What are the key specifications of MSP430F5325IPN?
The MSP430F5325IPN is a 25 MHz, 16-bit mixed-signal MCU with 64 KB of Flash, 6 KB of SRAM, and an 80-pin LQFP package. Texas Instruments identifies a 12-bit ADC, comparator, DMA, two USCIs, UART/SPI/I2C support, and a hardware multiplier. The MSP430F5325 family also includes four 16-bit timers, a 3.3 V internal LDO, an RTC with alarms, and 63 I/O pins, making it suitable for connected industrial and measurement systems.
Where to download the MSP430F5325IPN datasheet PDF?
Download the MSP430F5325IPN documentation from the Texas Instruments MSP430F5325 product page at https://www.ti.com/product/MSP430F5325. The ordering-specific page is https://www.ti.com/product/MSP430F5325/part-details/MSP430F5325IPN and identifies the exact 80-pin LQFP ordering code. Use the manufacturer datasheet for the complete pin-description table, memory map, electrical characteristics, timing requirements, and package drawings.
Where can I find the MSP430F5325IPN pinout?
The MSP430F5325IPN pinout is documented in the Texas Instruments MSP430F532x mixed-signal microcontroller datasheet. The exact ordering code uses an 80-pin LQFP package, identified by the manufacturer as package PN. Use the pin-description table and package drawing to map all ports, analog inputs, power pins, ground pins, reset, test, and clock functions before assigning PCB tracks.
How much Flash and SRAM does MSP430F5325IPN have?
MSP430F5325IPN provides 64 KB of Flash program memory and 6 KB of SRAM. Texas Instruments describes the device as a 25 MHz mixed-signal MCU with that exact memory configuration. The Flash area is intended for firmware storage, while the 6 KB SRAM supports variables, stack operations, buffers, and real-time control data.
Which peripherals are integrated into MSP430F5325IPN?
MSP430F5325IPN integrates a 12-bit ADC, comparator, DMA controller, two USCIs, a hardware multiplier, and mixed-signal control resources. The family configuration adds four 16-bit timers and an RTC with alarm capability. According to the Texas Instruments product information, UART, SPI, and I2C connectivity is supported through the integrated serial interfaces.
MSP430F5325IPN vs MSP430F5329IPN — which is better for an existing design?
MSP430F5325IPN and MSP430F5329IPN belong to the same MSP430F532x family and use the 80-pin LQFP format, with a 25 MHz CPU and 12-bit ADC architecture. MSP430F5325IPN is confirmed with 64 KB Flash and 6 KB SRAM. Before selecting MSP430F5329IPN for an existing MSP430F5325IPN board, compare its exact memory configuration, pin multiplexing, voltage limits, and peripheral assignments in the manufacturer datasheets because firmware and board changes may still be required.
MSP430F5325IPN vs MSP430F5327IPN — can the same PCB be reused?
The MSP430F5325IPN and MSP430F5327IPN are members of the same 25 MHz MSP430F532x mixed-signal family and are offered in the 80-pin LQFP configuration. Their shared package supports footprint reuse, but a true drop-in decision requires checking the exact Flash and SRAM capacities, multiplexed peripheral assignments, and firmware memory map. Treat the package match as a hardware advantage while completing device-level software and electrical validation before production.
When should I choose MSP430F5325IPN over MSP430F5329IPN?
Choose MSP430F5325IPN when the design is specifically configured for 64 KB Flash and 6 KB SRAM and requires the listed 25 MHz MSP430 mixed-signal feature set. MSP430F5329IPN may be useful when its confirmed memory and peripheral configuration matches the application more closely. Since MSP430F5329IPN is an 80-pin-family alternative, the package is compatible, but software compatibility must be established independently from footprint compatibility.
Is MSP430F5325IPN suitable for industrial sensor acquisition?
MSP430F5325IPN is suitable for industrial sensor acquisition because it combines a 12-bit ADC, comparator, four 16-bit timers, DMA, and 63 I/O pins at a 25 MHz clock. Its 64 KB Flash supports embedded control firmware, while two USCIs provide options for UART, SPI, or I2C sensor connections. Use the datasheet's analog-input and pin-muxing tables to select channels and establish the required input impedance and filtering.
What can replace MSP430F5325IPN?
The closest identified package-compatible alternatives are MSP430F5329IPN and MSP430F5327IPN, both from Texas Instruments and both members of the MSP430F532x family. Each uses the 80-pin LQFP configuration, but a replacement should be treated as a qualified redesign rather than an automatic substitution until memory maps, peripheral pin assignments, electrical limits, clocking, and existing firmware have been compared against the manufacturer datasheets.
What is the best Texas Instruments equivalent for MSP430F5325IPN?
MSP430F5329IPN is the leading same-manufacturer family alternative identified for an 80-pin LQFP design because it belongs to the MSP430F532x mixed-signal family and shares the 25 MHz, 12-bit ADC, timer, RTC, DMA, and serial-interface architecture. MSP430F5327IPN is another family option. Neither should be released as a drop-in substitute until the exact memory configuration, pin multiplexing, supply limits, and firmware dependencies are confirmed.
Where can I buy MSP430F5325IPN online?
Use the Request a Quote form on this page to request MSP430F5325IPN availability, current commercial terms, and a quotation. The exact device is also listed by Texas Instruments, DigiKey, Mouser, LCSC, and other product channels, but those listings do not replace an XAIPART quotation for the requested configuration and quantity. Specify the 80-pin LQFP PN ordering code when submitting the request.
What is the price of MSP430F5325IPN?
Use the Request a Quote form on this page for the current MSP430F5325IPN price because commercial pricing and availability can change with quantity and market conditions. The page also retains structured quantity-break evidence for the exact MPN. Request a quotation for the required quantity, delivery location, and production schedule so the commercial response reflects current terms.
What is the lead time for MSP430F5325IPN?
Request the current MSP430F5325IPN lead time through the Request a Quote form on this page. Texas Instruments identifies the MSP430F5325IPN as an orderable 80-pin LQFP device, and a distributor listing states that the part ships today; however, the appropriate lead time depends on order quantity and current inventory. Include your required quantity and target delivery date in the request.
Is MSP430F5325IPN in stock?
The MSP430F5325IPN is currently shown as orderable, with distributor inventory information and a listing that states it ships today. Because stock levels can change rapidly, use the Request a Quote form on this page to confirm availability for your exact quantity. Provide the 80-pin LQFP PN package and your production schedule so the response can reflect the current supply position.

Datos de referencia de ingeniería para MSP430F5325IPN — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose MSP430F5325IPN when the design requires a confirmed 64 KB Flash and 6 KB SRAM configuration together with a 12-bit ADC, comparator, four 16-bit timers, DMA, two USCIs, an RTC with alarms, and 63 I/O pins in an 80-pin LQFP package. MSP430F5329IPN is a same-family package-compatible option when its exact memory map, peripheral allocation, and firmware requirements fit the application. MSP430F5327IPN can also be evaluated on the same 80-pin footprint, but it should be selected only after confirming memory capacity, analog-channel assignments, and device-specific limits. Both alternatives share the 25 MHz mixed-signal family architecture and provide package reuse potential. Nevertheless, treat all three devices as MSP430 variants rather than unrelated MCUs, and complete electrical, timing, pin-muxing, and firmware regression checks before production substitution.

Comparación con alternativas

Parámetro Este producto MSP430F5329IPN MSP430F5327IPN
Brand Texas Instruments Texas Instruments Texas Instruments
Package 80-LQFP (PN, 12 x 12 mm) 80-LQFP (PN, 12 x 12 mm) 80-LQFP (PN, 12 x 12 mm)
CPU Architecture 16-bit MSP430 RISC 16-bit MSP430 RISC 16-bit MSP430 RISC
Maximum Clock Frequency 25 MHz 25 MHz 25 MHz
ADC Resolution 12 bit 12 bit 12 bit
Timer Count 4 x 16-bit 4 x 16-bit 4 x 16-bit
USCI Count 2 2 2
I/O Pin Count 63 63 63
Internal LDO 3.3 V 3.3 V 3.3 V

Diferenciadores clave

  • Confirmed memory configuration (frente a MSP430F5329IPN)
  • Mixed-signal integration (frente a MSP430F5327IPN)
  • 25 MHz control headroom (frente a MSP430F5329IPN)

Notas de diseño

Assign the 63 available I/O functions from the manufacturer pin-description table before routing the 80-pin LQFP PCB. Several analog, digital, timer, and serial functions may be multiplexed on the same package terminal. Confirm the selected alternate function, direction, pull configuration, and permitted voltage domain for every used pin. Keep unused inputs at a defined electrical state and follow the datasheet recommendations for unused I/O termination.

Treat ADC inputs and references as sensitive analog nets. Place input filtering and protection components near the MCU pins, use a quiet ground reference for the analog section, and avoid routing digital clock, UART, SPI, and switching-node traces beneath or immediately beside the analog inputs. The 12-bit conversion accuracy depends on the complete signal chain, so account for source impedance, acquisition time, reference stability, and PCB leakage rather than relying only on nominal converter resolution.

The MSP430F5325IPN includes an integrated 3.3 V LDO, but its use does not remove the need to verify the device's complete supply, I/O, and internal-rail limits in the manufacturer datasheet. Select an input source that satisfies those limits, provide the required decoupling at the relevant supply pins, and account for voltage levels on every externally connected signal. Do not assume that all communication interfaces use the same allowable voltage domain.

A shared LQFP footprint does not by itself establish firmware compatibility. Before releasing MSP430F5329IPN or MSP430F5327IPN as a replacement, compare memory capacities and map, interrupt priorities, port multiplexing, analog-channel assignments, timer and RTC resources, boot behavior, and electrical limits. Preserve a production artifact containing the original firmware, calibration data, and hardware revision to support controlled regression testing.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

Compliance status requires confirmation from the current manufacturer product documentation or declaration for the exact ordering code.

Datos verificados el: 2026-11-15 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

MSP430F5325IPN datasheet MSP430F5325IPN datasheet pdf MSP430F5325IPN pinout MSP430F5325IPN specifications MSP430F5325IPN price MSP430F5325IPN stock MSP430F5325IPN equivalent MSP430F5325IPN replacement MSP430F5325IPN vs MSP430F5329IPN MSP430F5325IPN vs MSP430F5327IPN Texas Instruments MSP430F5325IPN MSP430F5325IPN LQFP footprint MSP430F5325 25MHz 64KB Flash MSP430F5325 mixed signal application

Componentes & términos relacionados

Texas Instruments MSP430F5325IPN MSP430F5329IPN MSP430F5327IPN MSP430F5325 MSP430 CPU mixed-signal microcontroller 16-bit microcontroller embedded microcontroller semiconductor 64 KB Flash 6 KB SRAM 12-bit ADC comparator DMA UART SPI I2C USCI hardware multiplier 16-bit timer real-time clock 3.3 V LDO 80-pin LQFP LQFP family surface mount industrial sensor acquisition battery-operated monitoring building automation
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ