NRF51822-QFAC-R7 - Bluetooth LE/ANT SoC, 256KB Flash, QFN-48 | Nordic
N.º de pieza: NRF51822-QFAC-R7 ✗ Fin de vida| Cant. | Precio unitario | Total |
|---|---|---|
| 1 | $9.85 | $9,85 |
| 10 | $9.1 | $91,00 |
| 100 | $8.2 | $820,00 |
| 500 | $7.1 | $3.550,00 |
| 1.000 | $6.25 | $6.250,00 |
NRF51822-QFAC-R7 Descripción general
A Bluetooth SoC (System-on-Chip) is a single integrated circuit that combines a microcontroller, radio transceiver, memory, and peripherals required to implement a complete wireless connectivity solution. The nRF51822 sits within the broader product taxonomy of wireless MCUs -> 2.4 GHz transceivers -> RF & Wireless ICs. By collapsing the radio and protocol stack into one die, SoCs reduce BOM count, PCB complexity, and total system power compared with discrete MCU-plus-transceiver designs.
Key features include a 32-bit ARM Cortex-M0 core running up to 16 MHz, a 2.4 GHz radio with -93 dBm RX sensitivity in BLE mode, integrated 16-channel AES encryption accelerator, 12-bit/200 ksps ADC, and a rich peripheral set (GPIO, SPI, I2C, UART, PWM, RTC). The device supports both Bluetooth low energy (v4.0/v4.2) and the ANT+ protocol, making it a versatile choice for wearables, sports sensors, beacons, and proprietary 2.4 GHz links.
Architecturally, the nRF51822 separates the application Cortex-M0 core from the radio front-end through a shared memory architecture. A built-in DC-DC converter improves power efficiency at higher supply voltages, while an LDO mode is available for low-Iq designs. The part also includes a wake-on-radio function for ultra-low standby current.
Typical applications include Bluetooth Low Energy beacons, fitness wearables, medical sensors, smart-home nodes, and industrial IoT endpoints. The QFAC variant with 256 KB flash is targeted at applications requiring OTA firmware updates or richer protocol stacks.
A critical design consideration is antenna matching: the QFN package's single-ended RFIO pin requires a π-network matching network between the chip and antenna (typically chip or trace antenna) to meet Bluetooth 5.2 sub-1 GHz emissions. Decoupling capacitors must be placed close to the supply pins, and the DC-DC inductor must be shielded. Routing the exposed pad to a flooded ground plane is required for thermal dissipation.
This page consolidates distributor pricing, drop-in alternatives, and practical design notes - including same-brand Nordic variants and cross-brand equivalents - offering engineering value not found in the standalone datasheet.
Alternativas directas para NRF51822-QFAC-R7 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Herramienta de comparación rápida — seleccione piezas alternativas para compararlas lado a lado:
NRF51822-QFAA-R
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
NRF51822-QFAC-R
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
NRF52810-QFAA-R
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
NRF52832-QFAA-R
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
NRF51422-QFAC-R
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
NRF51802-QFAA-R
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
NRF51822-QFAC-R7 Valores máximos y características eléctricas
| Core Architecture | ARM Cortex-M0, 32-bit |
| Frecuencia de reloj máxima | 16 MHz |
| Flash Memory | 256 KB |
| RAM | 32 KB |
| Operating Voltage | 1.8 V to 3.6 V |
| Radio Frequency | 2.4 GHz (2400 MHz to 2483.5 MHz) |
| Supported Protocols | Bluetooth low energy v4.0/v4.2, ANT+, 2.4 GHz proprietary |
| TX Output Power | -20 dBm to +4 dBm |
| RX Sensitivity (BLE 1 Mbps) | -93 dBm |
| AES Encryption Accelerator | 16-channel hardware AES-ECB |
| ADC | 10-bit, 8 channels |
| Rango de temperatura de funcionamiento | -40 C to +85 C |
| Encapsulado | 48-pin QFN with exposed pad (6x6 mm) |
| Tipo de montaje | Surface Mount |
| Nivel MSL | 3 (168 hours) |
| Estado RoHS | Compliant |
| DC-DC Converter | Integrated (selectable LDO mode) |
Guía de configuración de pines de NRF51822-QFAC-R7 48-pin qfn with exposed pad (6x6 mm)
Configuración de pines para NRF51822-QFAC-R7 (encapsulado 48-pin qfn with exposed pad (6x6 mm)). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para NRF51822-QFAC-R7.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
NRF51822-QFAC-R7 es adecuado para 6 aplicacións: Bluetooth Low Energy Beacons, Wearable Fitness and Health Sensors, Smart Home IoT Endpoints, Medical Wireless Sensor Patches, Industrial IoT Wireless Modules, Wireless HID and Remote Controls.
Bluetooth Low Energy Beacons
The NRF51822-QFAC-R7 is widely deployed in BLE beacons for retail proximity marketing, asset tracking, and indoor wayfinding. Its -93 dBm RX sensitivity and +4 dBm TX power enable line-of-sight ranges of 30-50 m using a trace antenna, while the 256 KB flash accommodates iBeacon, Eddystone, and proprietary beacon profiles side-by-side. The integrated DC-DC converter keeps average beacon current under 25 µA at 1 Hz advertising, allowing 2-3 years of operation from a single CR2032 coin cell when TX duty cycle is optimized.
Recomendado
Wearable Fitness and Health Sensors
Wristbands, heart-rate straps, and running watches benefit from the NRF51822-QFAC-R7's low power and small QFN-48 (6x6 mm) footprint. The Cortex-M0 core runs sensor-fusion algorithms at under 5 mA active, and the 256 KB flash stores ANT+ device profiles plus BLE GATT services for multi-protocol fitness hubs. With -40 °C to +85 °C operation and 1.8 V minimum supply, the part is qualified for skin-contact and cold-weather outdoor sports use.
Recomendado
Smart Home IoT Endpoints
Smart-home sensors - temperature, door/window, leak, occupancy - leverage the NRF51822-QFAC-R7's Cortex-M0 + 2.4 GHz radio combination for coin-cell-powered BLE mesh nodes. The chip's hardware AES-ECB accelerator secures proprietary or BLE-mesh payloads with negligible CPU overhead, while the integrated 12-bit ADC directly reads thermistor or PIR outputs without an external ADC. Production code typically fits in under 180 KB flash, leaving headroom for OTA updates.
Recomendado
Medical Wireless Sensor Patches
Single-use medical patches for continuous patient monitoring (temperature, hydration, wound status) use the NRF51822-QFAC-R7's small footprint, low power, and integrated security. The hardware AES accelerator secures HIPAA-relevant patient data in transit, and the 32 KB RAM buffers multi-sensor fusion outputs between BLE transmissions. BLE link-layer encryption via AES-CCM provides medical-grade confidentiality without external crypto ICs.
Recomendado
Industrial IoT Wireless Modules
Industrial predictive-maintenance sensors - vibration, current, temperature on motors - use the NRF51822-QFAC-R7 to transmit telemetry over BLE or 2.4 GHz proprietary links to gateways. The -40 °C to +85 °C operating range covers most factory-floor enclosures, and the Cortex-M0 can run FFT preprocessing on vibration data before transmission, reducing radio duty cycle by 5-10x. Nordic's Gazell protocol enables sub-2 ms latency star networks for time-critical industrial nodes.
Recomendado
Wireless HID and Remote Controls
Wireless keyboards, presentation clickers, and game controllers use the NRF51822-QFAC-R7's proprietary 2.4 GHz modes for sub-8 ms input latency. The hardware AES-ECB secures HID pairing, and the low standby current (under 1.5 µA in System OFF) suits AAA-battery-powered remotes with 5+ year battery life. The QFN-48 (6x6 mm) package plus four PFWs fit inside the tight mechanical envelope of compact clickers and presenter remotes.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para NRF51822-QFAC-R7 — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | NRF51822-QFAA-R | NRF52810-QFAA-R | NRF52832-QFAA-R | NRF51422-QFAC-R | NRF51802-QFAA-R |
|---|---|---|---|---|---|---|
| Brand | Nordic Semiconductor | Nordic Semiconductor | Nordic Semiconductor | Nordic Semiconductor | Nordic Semiconductor | Nordic Semiconductor |
| Package | QFN-48 (6x6 mm) | QFN-48 (6x6 mm) | QFN-48 (6x6 mm) | QFN-48 (6x6 mm) | QFN-48 (6x6 mm) | QFN-48 (6x6 mm) |
| Core | ARM Cortex-M0 @ 16 MHz | ARM Cortex-M0 @ 16 MHz | ARM Cortex-M4 @ 64 MHz | ARM Cortex-M4F @ 64 MHz | ARM Cortex-M0 @ 16 MHz | ARM Cortex-M0 @ 16 MHz |
| Flash / RAM | 256 KB / 32 KB | 128 KB / 16 KB | 192 KB / 24 KB | 512 KB / 64 KB | 256 KB / 32 KB | 256 KB / 32 KB |
| Bluetooth Version | BLE 4.0 / 4.2 | BLE 4.0 / 4.2 | Bluetooth 5 | Bluetooth 5 | ANT/ANT+ (BLE disabled) | BLE 4.0 / 4.2 |
| TX Power Range | -20 to +4 dBm | -20 to +4 dBm | -20 to +4 dBm | -20 to +4 dBm | -20 to +4 dBm | -20 to 0 dBm (no +4 dBm) |
| RX Sensitivity (BLE 1M) | -93 dBm | -93 dBm | -96 dBm | -96 dBm | -93 dBm | -91 dBm |
| Operating Voltage | 1.8 V to 3.6 V | 1.8 V to 3.6 V | 1.7 V to 3.6 V | 1.7 V to 3.6 V | 1.8 V to 3.6 V | 1.8 V to 3.6 V |
| Lifecycle Status | NRND | NRND | Active | Active | NRND | NRND |
| Approx Unit Price (qty 1000) | $6.25 | $5.65 | $5.20 | $8.40 | $6.40 | $4.90 |
Diferenciadores clave
- 256 KB flash with full BLE/ANT multiprotocol support (frente a NRF51822-QFAA-R)
- Pin-compatible upgrade to Bluetooth 5 with Cortex-M4 (frente a NRF52832-QFAA-R)
- ANT+ protocol enabled for sports/medical hubs (frente a NRF51422-QFAC-R)
Notas de diseño
The NRF51822-QFAC-R7 requires a π-network matching network (typically 2.2 nL and 1.5 pF components) between the RFIO pin and the antenna to achieve -93 dBm RX sensitivity and meet FCC/CE emissions. The exposed thermal pad is the chip's main RF ground - flood all four layers beneath the QFN with continuous ground copper and stitch with 8-12 thermal vias (0.3 mm drill, 0.5 mm pitch). RF traces must be 50 Ω controlled-impedance (microstrip or coplanar waveguide), and decoupling capacitors (100 nF + 1 nF) must be placed within 1 mm of each VDD pin.
The integrated DC-DC converter mode reduces peak current draw by 30-40% compared to LDO mode at supply voltages above 2.0 V. Place the DC-DC inductor (10 µH, X5R, 0805) and its 100 nF bypass capacitor within 2 mm of the DEC1/DEC2 pins. For battery-critical coin-cell designs, switch to LDO mode below 2.0 V to eliminate DC-DC switching noise on the ADC and improve sleep current by 1-2 µA.
Do not load the SoftDevice into the upper 88 KB of flash on the -QFAC variant unless you have reserved flash for application code - typical SoftDevice S110 (BLE peripheral) is 96 KB and S120 (BLE central) is 96 KB. Choose SoftDevice size before committing to memory-mapped storage. Also, the GPIO drive strength is limited to 5 mA per pin; do not drive high-current LEDs directly without a MOSFET. The ADC reference voltage is internally tied to VDD - calibrate ADC readings against VDD to compensate for coin-cell discharge.
Estimated: at continuous +4 dBm TX, the NRF51822-QFAC-R7 draws up to 16 mA from a 3.6 V supply, dissipating ~57 mW in the die. With the QFN-48 package's theta_JA of approximately 40 °C/W (per Nordic's reference design), this yields a 2.3 °C junction rise above ambient - well within the +85 °C operating limit. However, in a sealed enclosure without airflow, add a 1-2 °C/W thermal margin when budgeting for sustained TX duty cycles above 50%.
Información de cumplimiento
RoHS compliant per Nordic product page. Not AEC-Q100 qualified; for automotive designs use nRF52832-AEC-Q100 variants. Bluetooth 4.0/4.2 qualified by Bluetooth SIG.
