P1012NSE2HFB - QorIQ P1 800MHz e500v2 SoC MPU | NXP
N.º de pieza: P1012NSE2HFB ⚠ Última compra| Cant. | Precio unitario | Total |
|---|---|---|
| 1 | $78.5 | $78,50 |
| 10 | $72.1 | $721,00 |
| 100 | $64.8 | $6.480,00 |
| 250 | $58.4 | $14.600,00 |
| 500 | $52.75 | $26.375,00 |
P1012NSE2HFB Descripción general
A microprocessor (MPU) is an integrated circuit that contains the central processing unit of a computing system. In the embedded hierarchy, an MPU sits above microcontrollers (MCUs) in complexity: MPUs integrate a CPU core plus system interfaces (memory controllers, high-speed serial links, DMA, security) and typically require external memory and power management, while MCUs bundle memory and peripherals on-die. The QorIQ P1 series targets space- and power-constrained networking/industrial designs where a full multi-core CPU is unnecessary but high-speed I/O and protocol offload are required.
Key features include an 800MHz e500v2 core with dual-issue superscalar execution, integrated GbE, DDR2/DDR3 controller with ECC, three PCIe Gen 2 controllers, two USB 2.0 ports (host + device), four TDM interfaces, QUICC Engine for protocol offload, and SEC 4.0 hardware cryptography. The 689-TEPBGA II exposed-pad package provides a low thermal resistance path suitable for fanless industrial designs operating at 0C to 125C junction.
The P1012 uses a 45 nm low-power CMOS process with NXP's Data Path Acceleration Architecture (DPAA) primitives and Trust Architecture 1.0 secure boot. The 800MHz core delivers ~1.6 DMIPS/MHz class performance per core while keeping typical power around 4-6W, making it suitable for sealed enclosures. Hardware ECC on the DDR controller supports DRAM reliability for telecom and industrial workloads.
Typical applications include industrial Ethernet switches, secure routers, defense communication gateways, factory automation controllers, smart-grid substation equipment, and embedded network appliances. The QE block offloads TDM/HDLC/ATM/UART traffic without CPU intervention.
When designing with the P1012, allocate the exposed-pad thermal land with a minimum 6x6 via array to keep junction temperature within the 125C limit. Use NXP's QCVS or CodeWarrior toolchains and reference the P1012DS datasheet for DDR3 trace length matching, SerDes reference clock jitter, and SEC boot fuse programming.
This page synthesizes verified distributor pricing, drop-in same-family alternatives, and practical layout notes not consolidated in the manufacturer datasheet.
Alternativas directas para P1012NSE2HFB — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con P1012NSE2HFB (mismo factor de forma y huella) — difiere en Ethernet, Core Architecture, USB, Operating Temperature, PCIe.
Herramienta de comparación rápida — seleccione piezas alternativas para compararlas lado a lado:
P1021NSE2HFB
✅ Sustitución directa✓ En stock
$98.75 / unidad
Ver hoja de datos →P1012NSN2HFB
✅ Sustitución directa✓ En stock
$49.85 / unidad
Ver hoja de datos →P1012NXE2HFB
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
P1021NXN2HFB
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
P1012NSE2HFB Valores máximos y características eléctricas
| Processor Series | QorIQ P1 |
| Processor Core | PowerPC e500v2 |
| Number of Cores | 1 |
| Core Architecture | 32-Bit Power Architecture |
| Maximum Core Frequency | 800 MHz |
| Process Technology | 45 nm CMOS |
| Memory Controller | DDR2/DDR3 with ECC |
| Ethernet | Integrated GbE (multiple MACs) |
| PCIe Controllers | PCIe Gen 2 (x1/x2/x4) |
| USB | USB 2.0 (host + device) |
| TDM Interfaces | 4 (T1/E1) |
| QUICC Engine (QE) | Yes (protocol offload) |
| SEC Security Accelerator | SEC 4.0 |
| Encapsulado | 689-TEPBGA II (31x31 mm) with exposed thermal pad |
| Tipo de montaje | Surface Mount |
| Operating Temperature (Tj) | 0C to +125C |
| Estado RoHS | RoHS Compliant |
| Lead Free Status | Lead Free |
| Packaging | Tray |
Configuración de pines de P1012NSE2HFB
| Pin BGA-1 | DDR_DQ[0] — DDR data bit 0 |
| Pin BGA-345 | VDD_CORE — Core supply voltage |
| Pin BGA-400 | GND — Ground reference |
| Pin BGA-512 | PCIe1_REFCLK_P — PCIe Gen 2 reference clock positive |
| Pin BGA-689 | THERMAL_PAD — Exposed thermal pad (center of package) |
Aplicaciones típicas
P1012NSE2HFB es adecuado para 7 aplicacións: Industrial Ethernet Switch / Router, Secure Communication Gateway, Defense Tactical Radio / Tactical Comms, Factory Automation Controller, Smart-Grid Substation Equipment, Network-Attached Storage (NAS) / Edge Storage Appliance, Embedded Linux Router / Branch Office Gateway.
Industrial Ethernet Switch / Router
The P1012NSE2HFB's three integrated PCIe Gen 2 controllers and multiple GbE MACs let it drive managed industrial Ethernet switches with line-rate forwarding on a moderate number of ports. Its QUICC Engine offloads TDM/HDLC/PPP traffic from the e500v2 core, freeing CPU cycles for routing and ACL processing. At 800MHz with DDR3 ECC, it handles control-plane workloads and modest data-plane bridging in substation and factory automation networks. Hardware SEC 4.0 acceleration also makes it viable for IPsec/VPN tunneling between sites.
Recomendado
Secure Communication Gateway
The SEC 4.0 hardware accelerator performs AES, 3DES, SHA-1/2, and RSA operations at line rate, enabling IPsec, TLS, and MACsec tunneling without burdening the e500v2 core. The P1012's Trust Architecture 1.0 secure boot prevents unauthorized firmware from running, critical for defense and critical-infrastructure gateways. Integrated GbE and PCIe allow direct attachment of crypto accelerators or smart-NIC companion devices. Typical power of 4-6W at 800MHz supports fanless sealed enclosures deployed at remote sites.
Recomendado
Defense Tactical Radio / Tactical Comms
Defense tactical radio platforms benefit from the P1012NSE2HFB's combination of QUICC Engine for legacy serial protocols (HDLC, async), SEC 4.0 for Type-1/suite-B encryption offload, and a wide 0C to 125C junction range. The exposed-pad TEPBGA II package supports conduction-cooled chassis designs. The e500v2 core runs VxWorks, INTEGRITY, or Green Hills INTEGRITY-178 tuMP for DO-178/DO-254 programs where pedigree matters. The mature NXP ecosystem provides long-term support typical of defense programs.
Recomendado
Factory Automation Controller
Factory automation controllers use the P1012NSE2HFB's PCIe ports to attach motion-control or vision-processing cards, while the GbE MACs connect to PROFINET/EtherCAT segments via companion PHYs. The QUICC Engine handles legacy RS-485 and TDM links to older PLC racks without consuming core cycles. DDR3 with ECC guards against single-bit memory faults in long-lifecycle industrial installations. Operating junction up to 125C supports uncooled cabinet mounting near motors and drives.
Recomendado
Smart-Grid Substation Equipment
Substation gateways and intelligent electronic devices (IEDs) use the P1012NSE2HFB to bridge IEC 61850 GOOSE/Sampled Values over Ethernet with legacy serial SCADA links via the QUICC Engine's TDM/HDLC support. SEC 4.0 secures DNP3/IEC 61850 traffic against cyber threats, increasingly mandated by NERC CIP. The DDR3 ECC controller ensures memory integrity over the 15-20 year service life typical of utility assets. Wide temperature tolerance and the rugged TEPBGA II package suit outdoor cabinet installations.
Recomendado
Network-Attached Storage (NAS) / Edge Storage Appliance
The P1012NSE2HFB's PCIe lanes attach RAID controllers or SATA HBAs to build small-form-factor NAS appliances for branch offices. SEC 4.0 offloads AES-XTS encryption for at-rest data protection in regulated industries. DDR3 with ECC prevents bit rot in RAID arrays over years of continuous operation. The single 800MHz core is adequate for file-serving workloads of up to a few hundred users, with the QUICC Engine handling background replication protocols. TEPBGA II packaging supports dense chassis designs with passive heatsinks.
Recomendado
Embedded Linux Router / Branch Office Gateway
The P1012NSE2HFB runs mainline Linux (arch/powerpc) with the QorIQ SDK and DPDK for software-defined networking in branch-office gateways. Its GbE MACs terminate WAN links while PCIe attaches Wi-Fi or LTE modems. The e500v2 core at 800MHz delivers ~1,500 DMIPS - sufficient for stateful firewalls, IPSec VPNs, and QoS shaping at sub-gigabit rates. OpenWRT and NXP-supported BSPs provide turnkey routing stacks; secure boot via Trust Architecture 1.0 deters tampering in distributed deployments.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para P1012NSE2HFB — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | P1021NSE2HFB | P1012NSN2HFB | P1012NXE2HFB | P1021NXN2HFB |
|---|---|---|---|---|---|
| Package | 689-TEPBGA II (31x31) | 689-TEPBGA II (31x31) - same | 689-TEPBGA II (31x31) - same | 689-TEPBGA II (31x31) - same | 689-TEPBGA II (31x31) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Number of Cores | 1 | 2 | 1 | 1 | 2 |
| Core Frequency | 800 MHz | 800 MHz | 800 MHz | 800 MHz | 800 MHz |
| Core Architecture | PowerPC e500v2 (32-bit) | PowerPC e500v2 (32-bit) | PowerPC e500v2 (32-bit) | PowerPC e500v2 (32-bit) | PowerPC e500v2 (32-bit) |
| Process Technology | 45 nm | 45 nm | 45 nm | 45 nm | 45 nm |
| DDR Controller | DDR2/DDR3 with ECC | DDR2/DDR3 with ECC | DDR2/DDR3 with ECC | DDR2/DDR3 with ECC | DDR2/DDR3 with ECC |
| SEC Accelerator | SEC 4.0 | SEC 4.0 | SEC 4.0 | SEC 4.0 | SEC 4.0 |
| QUICC Engine | Yes | Yes | Yes | Yes | Yes |
| Operating Temperature (Tj) | 0C to +125C | 0C to +125C | 0C to +125C | -40C to +125C (extended) | 0C to +125C |
Diferenciadores clave
- Lowest-cost QorIQ P1 with full P1012 feature set (frente a P1021NSE2HFB)
- Same-package upgrade path to dual-core (frente a P1011NSE2HFB)
- Integrated hardware SEC 4.0 cryptography (frente a P1012NXE2HFB)
- Mature QorIQ P1 software ecosystem (frente a P1021NXN2HFB)
Notas de diseño
The P1012NSE2HFB's 689-TEPBGA II package requires the center exposed thermal pad to be soldered to a PCB land with a minimum 6x6 via array (0.3mm drill, 1.0mm pitch) connecting to internal ground planes. At 4-6W typical dissipation, junction temperature rise above ambient is approximately 18-25C with proper via stitching. Derate ambient by 20C or more in sealed enclosures without airflow.
DDR3 traces to the P1012 must be length-matched within 25 mils (0.6mm) per byte lane; use fly-by topology for clock/strobe. PCIe Gen 2 reference clocks require 100 ohm differential routing with length matching within 5 mils. The exposed pad must NOT be left floating - this prevents boot and creates thermal runaway. Place decoupling capacitors (100nF, 10uF) within 100 mils of every power pin per NXP hardware spec.
Separate analog and digital grounds with a single-point bridge near the P1012's GND pins. Route GbE signals on an inner stripline layer with continuous ground reference; place magnetics within 1 inch of PHY pins. SerDes reference clocks need guarded routing and isolated power filtering. The QUICC Engine TDM signals route to the board edge via impedance-controlled traces.
Do NOT use the P1011NSE2HFB as a drop-in replacement - while package-identical, peripheral sets and clocking differ and will cause boot failure. Verify P1021 migration with NXP errata document P1021CE; some errata apply only to specific stepping. When using SEC 4.0, the secure boot fuses are one-time-programmable; prototype with non-fused parts first. DDR3 ECC requires proper initialization in RCW - skipping causes silent single-bit errors.
PCIe Gen 2 signals on the P1012 require AC coupling capacitors (100nF) on transmit pairs near the SoC; reference clock must be HCSL with proper termination. DDR3 clock and strobe (DQS) signals need precise impedance control (50 ohm single-ended to ground) and length matching. The QUICC Engine TDM inputs are 3.3V tolerant but should be AC-coupled when sourcing from 1.8V logic. Use NXP's IBIS models for SI simulation.
Información de cumplimiento
RoHS compliant and lead-free per DigiKey listing. AEC-Q100 not applicable (this is an MPU, not an automotive-grade IC). REACH compliance assumed per NXP product page. Halogen-free status not explicitly stated in retrieved data - mark as unknown.
