P5020NSE7TNB - QorIQ Dual-Core PowerPC SoC 2.0GHz | NXP
N.º de pieza: P5020NSE7TNB ⚠ Última compra| Cant. | Precio unitario | Total |
|---|---|---|
| 1 | $285 | $285,00 |
| 10 | $268.5 | $2.685,00 |
| 100 | $245 | $24.500,00 |
| 500 | $222 | $111.000,00 |
| 1.000 | $199.5 | $199.500,00 |
P5020NSE7TNB Descripción general
A microprocessor (MPU) is the central processing element of an embedded computing system. Within the SoC taxonomy, the P5020 sits at the top of the hierarchy: microprocessor (MPU) > multi-core SoC > communications processor > network infrastructure SoC. The QorIQ P5 family is specifically engineered for control-plane and packet-processing tasks in routers, switches, base stations, and industrial automation controllers, where deterministic single-thread performance and high I/O bandwidth matter more than raw core count.
Key features include dual e5500 cores with out-of-order execution, 80 GHz effective frequency-equivalent throughput per core, hardware-accelerated security (SEC 4.2) for IPSec, SSL/TLS, and 3GPP wireless protocols, hardware pattern-matching engine for L2-L7 deep packet inspection, integrated 64-bit DDR3/3L controller with ECC supporting up to 32 GB of addressable memory, and SerDes supporting multiple protocols: three PCIe Gen2 controllers, up to 10 Gigabit Ethernet ports, and two SRIO lanes.
The architecture uses a hierarchical interconnect with CoreNet coherency fabric and platform cache, enabling tight cache coherency between cores, I/O, and accelerators. The SEC engine and pattern-matcher operate autonomously, offloading security and DPI tasks that would otherwise consume core cycles, which is critical for line-rate throughput.
Typical applications include enterprise routers and switches, 4G/LTE baseband units, industrial automation controllers, network-attached storage (NAS) controllers, and military/aerospace secure communications. This specific part suffix (T7) targets the 0 to 105C extended-temperature industrial range, while the 2.0 GHz core speed (versus the lower binned 1.8 GHz P5020NSE variants) supplies headroom for compute-bound networking workloads.
When designing with this part, allocate proper thermal management: at full load a 1295-FCPBGA dissipates 15-30 W depending on activity, requiring a heatsink or cold-plate. DDR3 traces must be length-matched within tight tolerances per the QorIQ design checklist, and the SEC/PATTERN engines each require dedicated firmware/license provisioning.
This page synthesizes distributor availability, drop-in QorIQ family alternatives from verified sources, and practical design notes not collated in the manufacturer datasheet alone.
Alternativas directas para P5020NSE7TNB — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con P5020NSE7TNB (mismo factor de forma y huella) — difiere en Package, Ethernet, Hardware Acceleration, Mounting Type, Number of Cores.
Herramienta de comparación rápida — seleccione piezas alternativas para compararlas lado a lado:
P5020NXN7TNB
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
P5020NSE1VNB
✅ Sustitución directa✓ En stock
$185 / unidad
Ver hoja de datos →P5010NSE7TNB
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
P5020NSE7VNB
✅ Sustitución directa✓ En stock
$345.4 / unidad
Ver hoja de datos →P5020NSE7MNB
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
P5020NSE7TNB Valores máximos y características eléctricas
| Core Architecture | Power Architecture e5500 (64-bit) |
| Number of Cores | 2 (Dual-Core) |
| Maximum Core Frequency | 2.0 GHz |
| Series | QorIQ P5 |
| Co-Processors / Accelerators | SEC 4.2, Pattern Matching Engine |
| Memory Controller | DDR3 / DDR3L with ECC |
| Graphics Acceleration | No |
| Ethernet | Up to 10 Gbps (multiple GbE interfaces) |
| PCIe | PCIe Gen2 controllers |
| Serial RapidIO (SRIO) | Yes |
| Hardware Acceleration | Pattern Matching, SEC |
| Temperatura de funcionamiento | 0°C to +105°C |
| Encapsulado | 1295-FCPBGA (37.5 x 37.5 mm) |
| Tipo de montaje | Surface Mount |
| Part Status | Not For New Designs (EOL announced) |
| Bus Width | 64-bit |
Guía de configuración de pines de P5020NSE7TNB 1295-fcpbga (37.5 x 37.5 mm)
Configuración de pines para P5020NSE7TNB (encapsulado 1295-fcpbga (37.5 x 37.5 mm)). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para P5020NSE7TNB.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
P5020NSE7TNB es adecuado para 6 aplicacións: Enterprise Routers and Switches, Wireless Base Stations and LTE Baseband, Industrial Automation Controllers, Network-Attached Storage Controllers, Military and Aerospace Secure Communications, Edge Server and Network Appliance.
Enterprise Routers and Switches
The P5020NSE7TNB is engineered for control-plane and packet-processing tasks in enterprise routers and switches, where the SEC 4.2 crypto engine offloads IPSec/SSL line-rate work and the hardware pattern-matcher accelerates L2-L7 deep packet inspection. Its dual 2.0 GHz e5500 cores give single-thread routing-protocol performance headroom critical for OSPF/BGP convergence, while the integrated 10 Gigabit Ethernet and PCIe Gen2 controllers connect directly to switch ASICs without external bridges. The 1295-FCPBGA package keeps the BOM small by integrating DDR3/3L, multiple Ethernet MACs, and SerDes, reducing board area versus discrete CPU-plus-network-processor designs.
Recomendado
Wireless Base Stations and LTE Baseband
In LTE and 4G/5G baseband units the P5020NSE7TNB acts as a Layer-2/3 control-plane co-processor alongside DSP arrays, leveraging its SEC engine for 3GPP LTE/5G ciphering (SNOW 3G, AES, ZUC) and SRIO links for chip-to-chip DSP connectivity. The DDR3 controller supports bandwidth-intensive HARQ memory and protocol-stack buffering, while PCIe Gen2 lanes connect to baseband FPGA or DSP cards. The 0-105 C operating range suits outdoor radio units and tower-top deployments where ambient temperatures swing widely.
Recomendado
Industrial Automation Controllers
Industrial automation and process-control systems use the P5020NSE7TNB as a deterministic controller in SCADA gateways and PLC line cards, where dual-core redundancy and SEC-protected communications are key. Its Hardware Pattern-Matching engine accelerates deterministic Ethernet protocols (EtherCAT, Profinet) and its 0-105 C junction temperature range handles factory-floor thermal extremes. The integrated Gigabit Ethernet count supports multi-ring industrial topologies without an external switch, reducing cost-per-port in machine-vision and motion-control cabinets.
Recomendado
Network-Attached Storage Controllers
NAS controllers use the P5020NSE7TNB as a high-performance storage CPU where the dual e5500 cores handle filesystem metadata, RAID parity, and iSCSI/NFS offload with hardware pattern-matching acceleration for deduplication and compression. The DDR3/3L ECC controller protects against bit-flips in long-running storage arrays, and the multiple PCIe Gen2 lanes support RAID HBAs and 10 GbE uplinks. The integrated 10 GbE MAC reduces external component count versus CPU-plus-external-MAC solutions.
Recomendado
Military and Aerospace Secure Communications
Secure military radios and tactical networks rely on the P5020NSE7TNB's SEC 4.2 engine for HAIPE encryption and Suite-B cryptographic acceleration, offloading AES-256/GCM line-rate work from the application cores. The dual-core redundancy with ECC-protected DDR3 supports safety-critical designs requiring fault-tolerant operation, and the wide operating-temperature range covers avionics and ground-vehicle environments. SRIO interfaces connect to FPGA-based modem cards for SDR front-ends.
Recomendado
Edge Server and Network Appliance
Edge servers, SD-WAN appliances, and uCPE platforms use the P5020NSE7TNB where its balance of compute and I/O bandwidth eliminates the need for a separate networking ASIC. The DDR3/3L controller supports up to 32 GB of system memory for VM/container workloads, the SEC engine provides per-VPN tunnel encryption at line rate, and the PCIe controllers connect to Wi-Fi or LTE/5G modems. Integrated SerDes reduces BOM and board complexity versus designs pairing a generic x86 CPU with discrete networking silicon.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para P5020NSE7TNB — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | P5020NXN7TNB | P5020NSE1VNB | P5010NSE7TNB | P5020NSE7VNB | P5020NSE7MNB |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 1295-FCPBGA (37.5x37.5) | 1295-FCPBGA (37.5x37.5) - same | 1295-FCPBGA (37.5x37.5) - same | 1295-FCPBGA (37.5x37.5) - same | 1295-FCPBGA (37.5x37.5) - same | 1295-FCPBGA (37.5x37.5) - same |
| Number of Cores | 2 (Dual-Core) | 2 (Dual-Core) | 2 (Dual-Core) | 1 (Single-Core) | 2 (Dual-Core) | 2 (Dual-Core) |
| Core Architecture | Power Architecture e5500 (64-bit) | Power Architecture e5500 (64-bit) | Power Architecture e5500 (64-bit) | Power Architecture e5500 (64-bit) | Power Architecture e5500 (64-bit) | Power Architecture e5500 (64-bit) |
| Maximum Core Frequency | 2.0 GHz | 2.0 GHz | 2.0 GHz | 2.0 GHz | 2.0 GHz | 2.0 GHz |
| Memory Controller | DDR3/DDR3L with ECC | DDR3/DDR3L with ECC | DDR3/DDR3L with ECC | DDR3/DDR3L with ECC | DDR3/DDR3L with ECC | DDR3/DDR3L with ECC |
| Security / Acceleration | SEC 4.2 + Pattern Matching | SEC 4.2 + Pattern Matching | SEC 4.2 + Pattern Matching | SEC 4.2 + Pattern Matching | SEC 4.2 + Pattern Matching | SEC 4.2 + Pattern Matching |
| Operating Temperature | 0 C to +105 C | 0 C to +105 C | -40 C to +105 C (extended) | 0 C to +105 C | 0 C to +105 C | 0 C to +105 C |
Diferenciadores clave
- Dual-core e5500 with hardware crypto + pattern-match offload (frente a P5010NSE7TNB (single-core variant))
- Industrial 0-105 C temperature range suitable for outdoor deployments (frente a P5020NSE1VNB (extended -40 C to +105 C))
- Functional equivalent across multiple factory-bin suffix variants (frente a Other P5020NSE7xxx suffix variants)
Notas de diseño
Estimated: at full dual-core load with SEC/PM engines active, the P5020NSE7TNB dissipates approximately 20 W; the 37.5x37.5 mm FCPBGA package spreads heat but still requires either a heatsink, a thermal interface material with a cold plate, or a forced-air solution to stay below the 105 C junction limit at high ambient. Always refer to the NXP QorIQ thermal model rather than relying on datasheet TDP alone.
The 1295-FCPBGA package requires a 12+ layer PCB with microvia-in-pad technology for the BGA break-out. DDR3 traces must be length-matched within tight tolerances (typically +/- 25 mil) per the QorIQ design-checklist application note. SerDes lanes must be routed with controlled-impedance differential pairs and length-matched within the SerDes tolerance window; failure to do so is the most common cause of link-up issues.
The P5020 family requires proper CoreNet platform-cache initialization and SEC/PM firmware provisioning before full performance is reachable; jumpers may need to boot a slower fallback clock if the firmware image is corrupt. Always design a recovery path (e.g., SPI flash with redundant images). SEC licensing is per-part-number and migrating between suffixes can require re-provisioning in production.
Power sequencing must follow the NXP QorIQ power-supply design guide; core voltage (Vdd), I/O voltage (Vdd_IO), and SerDes voltage (Vdd_SerDes) each have independent ramp-time requirements. A common failure mode is missing the PORESET window and a corrupted boot. Estimating with one TPS54620 or comparable DC-DC per rail is typical; plan for at least 3 independent supplies.
Información de cumplimiento
Specific RoHS/REACH compliance declarations were not present in the verified distributor data and should be cross-checked against the NXP material declaration. AEC-Q100 does not apply because this is an industrial/control-plane MPU, not an automotive-qualified part.
