P5020NSE7TNB - QorIQ Dual-Core PowerPC SoC 2.0GHz | NXP
Référence : P5020NSE7TNB ⚠ Dernier achat| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $285 | $285,00 |
| 10 | $268.5 | $2 685,00 |
| 100 | $245 | $24 500,00 |
| 500 | $222 | $111 000,00 |
| 1 000 | $199.5 | $199 500,00 |
P5020NSE7TNB Présentation
A microprocessor (MPU) is the central processing element of an embedded computing system. Within the SoC taxonomy, the P5020 sits at the top of the hierarchy: microprocessor (MPU) > multi-core SoC > communications processor > network infrastructure SoC. The QorIQ P5 family is specifically engineered for control-plane and packet-processing tasks in routers, switches, base stations, and industrial automation controllers, where deterministic single-thread performance and high I/O bandwidth matter more than raw core count.
Key features include dual e5500 cores with out-of-order execution, 80 GHz effective frequency-equivalent throughput per core, hardware-accelerated security (SEC 4.2) for IPSec, SSL/TLS, and 3GPP wireless protocols, hardware pattern-matching engine for L2-L7 deep packet inspection, integrated 64-bit DDR3/3L controller with ECC supporting up to 32 GB of addressable memory, and SerDes supporting multiple protocols: three PCIe Gen2 controllers, up to 10 Gigabit Ethernet ports, and two SRIO lanes.
The architecture uses a hierarchical interconnect with CoreNet coherency fabric and platform cache, enabling tight cache coherency between cores, I/O, and accelerators. The SEC engine and pattern-matcher operate autonomously, offloading security and DPI tasks that would otherwise consume core cycles, which is critical for line-rate throughput.
Typical applications include enterprise routers and switches, 4G/LTE baseband units, industrial automation controllers, network-attached storage (NAS) controllers, and military/aerospace secure communications. This specific part suffix (T7) targets the 0 to 105C extended-temperature industrial range, while the 2.0 GHz core speed (versus the lower binned 1.8 GHz P5020NSE variants) supplies headroom for compute-bound networking workloads.
When designing with this part, allocate proper thermal management: at full load a 1295-FCPBGA dissipates 15-30 W depending on activity, requiring a heatsink or cold-plate. DDR3 traces must be length-matched within tight tolerances per the QorIQ design checklist, and the SEC/PATTERN engines each require dedicated firmware/license provisioning.
This page synthesizes distributor availability, drop-in QorIQ family alternatives from verified sources, and practical design notes not collated in the manufacturer datasheet alone.
Alternatives de remplacement direct pour P5020NSE7TNB — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec P5020NSE7TNB (même facteur de forme et même empreinte) — différant par Package, Ethernet, Hardware Acceleration, Mounting Type, Number of Cores.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
P5020NXN7TNB
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
P5020NSE1VNB
✅ Remplacement direct✓ En stock
$185 / unité
Voir la fiche technique →P5010NSE7TNB
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
P5020NSE7VNB
✅ Remplacement direct✓ En stock
$345.4 / unité
Voir la fiche technique →P5020NSE7MNB
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
P5020NSE7TNB Valeurs maximales et caractéristiques électriques
| Core Architecture | Power Architecture e5500 (64-bit) |
| Number of Cores | 2 (Dual-Core) |
| Maximum Core Frequency | 2.0 GHz |
| Series | QorIQ P5 |
| Co-Processors / Accelerators | SEC 4.2, Pattern Matching Engine |
| Memory Controller | DDR3 / DDR3L with ECC |
| Graphics Acceleration | No |
| Ethernet | Up to 10 Gbps (multiple GbE interfaces) |
| PCIe | PCIe Gen2 controllers |
| Serial RapidIO (SRIO) | Yes |
| Hardware Acceleration | Pattern Matching, SEC |
| Température de fonctionnement | 0°C to +105°C |
| Boîtier | 1295-FCPBGA (37.5 x 37.5 mm) |
| Type de montage | Surface Mount |
| Part Status | Not For New Designs (EOL announced) |
| Bus Width | 64-bit |
Guide de configuration des broches du P5020NSE7TNB 1295-fcpbga (37.5 x 37.5 mm)
Configuration des broches du P5020NSE7TNB (boîtier 1295-fcpbga (37.5 x 37.5 mm)). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour P5020NSE7TNB.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
P5020NSE7TNB convient pour 6 applications: Enterprise Routers and Switches, Wireless Base Stations and LTE Baseband, Industrial Automation Controllers, Network-Attached Storage Controllers, Military and Aerospace Secure Communications, Edge Server and Network Appliance.
Enterprise Routers and Switches
The P5020NSE7TNB is engineered for control-plane and packet-processing tasks in enterprise routers and switches, where the SEC 4.2 crypto engine offloads IPSec/SSL line-rate work and the hardware pattern-matcher accelerates L2-L7 deep packet inspection. Its dual 2.0 GHz e5500 cores give single-thread routing-protocol performance headroom critical for OSPF/BGP convergence, while the integrated 10 Gigabit Ethernet and PCIe Gen2 controllers connect directly to switch ASICs without external bridges. The 1295-FCPBGA package keeps the BOM small by integrating DDR3/3L, multiple Ethernet MACs, and SerDes, reducing board area versus discrete CPU-plus-network-processor designs.
Recommandé
Wireless Base Stations and LTE Baseband
In LTE and 4G/5G baseband units the P5020NSE7TNB acts as a Layer-2/3 control-plane co-processor alongside DSP arrays, leveraging its SEC engine for 3GPP LTE/5G ciphering (SNOW 3G, AES, ZUC) and SRIO links for chip-to-chip DSP connectivity. The DDR3 controller supports bandwidth-intensive HARQ memory and protocol-stack buffering, while PCIe Gen2 lanes connect to baseband FPGA or DSP cards. The 0-105 C operating range suits outdoor radio units and tower-top deployments where ambient temperatures swing widely.
Recommandé
Industrial Automation Controllers
Industrial automation and process-control systems use the P5020NSE7TNB as a deterministic controller in SCADA gateways and PLC line cards, where dual-core redundancy and SEC-protected communications are key. Its Hardware Pattern-Matching engine accelerates deterministic Ethernet protocols (EtherCAT, Profinet) and its 0-105 C junction temperature range handles factory-floor thermal extremes. The integrated Gigabit Ethernet count supports multi-ring industrial topologies without an external switch, reducing cost-per-port in machine-vision and motion-control cabinets.
Recommandé
Network-Attached Storage Controllers
NAS controllers use the P5020NSE7TNB as a high-performance storage CPU where the dual e5500 cores handle filesystem metadata, RAID parity, and iSCSI/NFS offload with hardware pattern-matching acceleration for deduplication and compression. The DDR3/3L ECC controller protects against bit-flips in long-running storage arrays, and the multiple PCIe Gen2 lanes support RAID HBAs and 10 GbE uplinks. The integrated 10 GbE MAC reduces external component count versus CPU-plus-external-MAC solutions.
Recommandé
Military and Aerospace Secure Communications
Secure military radios and tactical networks rely on the P5020NSE7TNB's SEC 4.2 engine for HAIPE encryption and Suite-B cryptographic acceleration, offloading AES-256/GCM line-rate work from the application cores. The dual-core redundancy with ECC-protected DDR3 supports safety-critical designs requiring fault-tolerant operation, and the wide operating-temperature range covers avionics and ground-vehicle environments. SRIO interfaces connect to FPGA-based modem cards for SDR front-ends.
Recommandé
Edge Server and Network Appliance
Edge servers, SD-WAN appliances, and uCPE platforms use the P5020NSE7TNB where its balance of compute and I/O bandwidth eliminates the need for a separate networking ASIC. The DDR3/3L controller supports up to 32 GB of system memory for VM/container workloads, the SEC engine provides per-VPN tunnel encryption at line rate, and the PCIe controllers connect to Wi-Fi or LTE/5G modems. Integrated SerDes reduces BOM and board complexity versus designs pairing a generic x86 CPU with discrete networking silicon.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour P5020NSE7TNB — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | P5020NXN7TNB | P5020NSE1VNB | P5010NSE7TNB | P5020NSE7VNB | P5020NSE7MNB |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 1295-FCPBGA (37.5x37.5) | 1295-FCPBGA (37.5x37.5) - same | 1295-FCPBGA (37.5x37.5) - same | 1295-FCPBGA (37.5x37.5) - same | 1295-FCPBGA (37.5x37.5) - same | 1295-FCPBGA (37.5x37.5) - same |
| Number of Cores | 2 (Dual-Core) | 2 (Dual-Core) | 2 (Dual-Core) | 1 (Single-Core) | 2 (Dual-Core) | 2 (Dual-Core) |
| Core Architecture | Power Architecture e5500 (64-bit) | Power Architecture e5500 (64-bit) | Power Architecture e5500 (64-bit) | Power Architecture e5500 (64-bit) | Power Architecture e5500 (64-bit) | Power Architecture e5500 (64-bit) |
| Maximum Core Frequency | 2.0 GHz | 2.0 GHz | 2.0 GHz | 2.0 GHz | 2.0 GHz | 2.0 GHz |
| Memory Controller | DDR3/DDR3L with ECC | DDR3/DDR3L with ECC | DDR3/DDR3L with ECC | DDR3/DDR3L with ECC | DDR3/DDR3L with ECC | DDR3/DDR3L with ECC |
| Security / Acceleration | SEC 4.2 + Pattern Matching | SEC 4.2 + Pattern Matching | SEC 4.2 + Pattern Matching | SEC 4.2 + Pattern Matching | SEC 4.2 + Pattern Matching | SEC 4.2 + Pattern Matching |
| Operating Temperature | 0 C to +105 C | 0 C to +105 C | -40 C to +105 C (extended) | 0 C to +105 C | 0 C to +105 C | 0 C to +105 C |
Principaux différenciateurs
- Dual-core e5500 with hardware crypto + pattern-match offload (vs P5010NSE7TNB (single-core variant))
- Industrial 0-105 C temperature range suitable for outdoor deployments (vs P5020NSE1VNB (extended -40 C to +105 C))
- Functional equivalent across multiple factory-bin suffix variants (vs Other P5020NSE7xxx suffix variants)
Notes de conception
Estimated: at full dual-core load with SEC/PM engines active, the P5020NSE7TNB dissipates approximately 20 W; the 37.5x37.5 mm FCPBGA package spreads heat but still requires either a heatsink, a thermal interface material with a cold plate, or a forced-air solution to stay below the 105 C junction limit at high ambient. Always refer to the NXP QorIQ thermal model rather than relying on datasheet TDP alone.
The 1295-FCPBGA package requires a 12+ layer PCB with microvia-in-pad technology for the BGA break-out. DDR3 traces must be length-matched within tight tolerances (typically +/- 25 mil) per the QorIQ design-checklist application note. SerDes lanes must be routed with controlled-impedance differential pairs and length-matched within the SerDes tolerance window; failure to do so is the most common cause of link-up issues.
The P5020 family requires proper CoreNet platform-cache initialization and SEC/PM firmware provisioning before full performance is reachable; jumpers may need to boot a slower fallback clock if the firmware image is corrupt. Always design a recovery path (e.g., SPI flash with redundant images). SEC licensing is per-part-number and migrating between suffixes can require re-provisioning in production.
Power sequencing must follow the NXP QorIQ power-supply design guide; core voltage (Vdd), I/O voltage (Vdd_IO), and SerDes voltage (Vdd_SerDes) each have independent ramp-time requirements. A common failure mode is missing the PORESET window and a corrupted boot. Estimating with one TPS54620 or comparable DC-DC per rail is typical; plan for at least 3 independent supplies.
Informations de conformité
Specific RoHS/REACH compliance declarations were not present in the verified distributor data and should be cross-checked against the NXP material declaration. AEC-Q100 does not apply because this is an industrial/control-plane MPU, not an automotive-qualified part.
