Texas Instruments

PCA9515ADG4 - Dual I2C Buffer, 400kHz | Texas Instruments

N.º de pieza: PCA9515ADG4 ✓ Activo
2.3 V to 3.6 V Vdss 500 µA Id 8-SOIC (0.154 inch, 3.90 mm width) Package 400 kHz Speed
MOQ: 1 |

PCA9515ADG4 Descripción general

The Texas Instruments PCA9515ADG4 is a dual-channel bidirectional I2C bus and SMBus repeater operating from 2.3 V to 3.6 V, supporting a maximum bus frequency of 400 kHz in an 8-pin SOIC package. The device contains two identical bidirectional open-drain buffers, an active-high repeater-enable input, and 5.5 V-tolerant I2C inputs.

An I2C repeater is a type of bus buffer that regenerates or isolates a bidirectional bus segment. In the broader hierarchy, it is an interface IC, a bus-management IC, and a semiconductor. Unlike a unidirectional logic buffer, each PCA9515ADG4 channel supports signal flow in both directions, allowing the same two pins to participate in an I2C transaction. This makes the device useful when bus capacitance, loading, voltage differences, or physical distance prevents one controller from driving the complete bus reliably.

The PCA9515ADG4 provides two bidirectional channels, a 400 kHz operating-rate designation, 5.5 V-tolerant I2C I/O, and a 5.5 V-tolerant enable input. Its open-drain I/O architecture is compatible with the wired-AND behavior required by I2C and SMBus. The specified propagation delay is 113 ns, while input capacitance is 7 pF, characteristics that are important when budgeting capacitive loading and propagation delay across the repeated bus segment.

The device requires a supply voltage between 2.3 V and 3.6 V. A typical implementation connects the buffer between a bus-master side and a remote peripheral side, with pull-up resistors placed separately on each side of the repeater. The enable input can hold the buffers in a high-impedance state when the downstream segment must be isolated. The measured 500 µA supply current supports low-power embedded systems while keeping the repeater available for continuous bus operation.

Typical uses include extending an I2C sensor bus, isolating a controller from noisy peripherals, separating high-capacitance bus sections, and supporting SMBus-compatible equipment. It is particularly useful when the same PCB contains several addressable sensors, EEPROMs, analog converters, or power-monitoring components. Industrial temperature-grade availability and the compact SOIC-8 footprint make it practical for embedded control and instrumentation systems.

For reliable operation, use pull-up resistors on each isolated bus segment and verify that total capacitance, sink-current loading, and timing remain within the limits of every connected device. Keep the repeater-enable net defined so that power-up cannot accidentally leave a downstream segment floating or partially enabled. Check signal polarity and bus direction at the system level because both channels are bidirectional and operate through open-drain pull-ups.

This page combines the PCA9515ADG4 electrical characteristics with package information, application guidance, design considerations, and a verified same-package replacement reference. It is intended to help engineers select the correct bus repeater, plan its board layout, and distinguish a true pin-compatible substitute from parts that require PCB changes.

Alternativas directas para PCA9515ADG4 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con PCA9515ADG4 (mismo factor de forma y huella) — difiere en Enable Input, Number of Channels, Package.

Texas Instruments
Enable Input: Active-high repeater-enable (EN)
Number of Channels: 2
Package: 8-SOIC
Comparar con PCA9515ADG4 →
Texas Instruments
Enable Input: Active-high repeater-enable (EN)
Number of Channels: 2
Package: 8-SOIC
Comparar con PCA9515ADG4 →

PCA9515ADR

✅ Sustitución directa
Texas Instruments
📦 8-SOIC
Dual bidirectional I2C bus and SMBus repeater (buffer) · 2 · 400 kHz (max) · 2.3 V to 3.6 V · 5.5 V tolerant I2C I/O and enable input · BiCMOS · Open-drain I2C · Active-high repeater-enable (EN)

Consulte el precio

Ver hoja de datos →

PCA9515ADG4 Especificaciones

Product Type Dual bidirectional I2C bus and SMBus repeater
Number of Channels 2 channels
Supply Voltage Range 2.3 V to 3.6 V
Maximum Bus Frequency 400 kHz
Propagation Delay 113 ns
Capacitancia de entrada 7 pF
Corriente de alimentación 500 µA
I/O Architecture Bidirectional open-drain
Enable Input Active-high repeater enable
I2C I/O Voltage Tolerance 5.5 V tolerant
Enable Input Voltage Tolerance 5.5 V tolerant
Bus Compatibility I2C and SMBus
Encapsulado 8-SOIC (0.154 inch, 3.90 mm width)
Tipo de montaje Surface mount
Temperature Grade Industrial grade

Guía de configuración de pines de PCA9515ADG4 8-soic (0.154 inch, 3.90 mm width)

Configuración de pines para PCA9515ADG4 (encapsulado 8-soic (0.154 inch, 3.90 mm width)). La numeración de pines, las funciones y los diagramas de conexión se definen en la hoja de datos del fabricante. Consúltela para conocer el footprint exacto y las directrices de soldadura.

Diagrama de patillaje del encapsulado 8-soic (0.154 inch, 3.90 mm width) para PCA9515ADG4

No hay datos detallados de patillaje disponibles para PCA9515ADG4.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

PCA9515ADG4 es adecuado para 6 aplicacións: Extended I2C Sensor Bus, SMBus Equipment Segmentation, Isolated Industrial Control Bus, Precision Data Acquisition Bus, Battery-Powered Sensor Node, Power and Current Monitoring System.

🧩

Extended I2C Sensor Bus

The PCA9515ADG4 fits an extended I2C sensor bus because its two bidirectional channels can divide a high-capacitance network into separately pulled-up sections. With a 2.3 V to 3.6 V operating range and a 400 kHz rating, it preserves the standard I2C topology while limiting the load seen by the controller. Its 113 ns propagation delay and 7 pF input capacitance should be included in the bus timing and capacitance budget, especially when several addressable sensors share the repeated segment.

🏭

SMBus Equipment Segmentation

The PCA9515ADG4 is appropriate for segmenting an SMBus-compatible control network when passive or active devices create excessive loading. Its two open-drain bidirectional channels preserve the wired-AND signaling used by SMBus, while the active-high enable control allows a downstream segment to be isolated when required. The 400 kHz bus rating supports standard-mode and fast-mode operation, and the 2.3 V to 3.6 V supply range fits common embedded and industrial control voltages.

🏭

Isolated Industrial Control Bus

The PCA9515ADG4 can separate a controller from a group of industrial peripherals when board layout, connector routing, or ground-related loading makes a single large I2C network impractical. Each open-drain channel is bidirectional, so data and acknowledge signals travel naturally in both directions. The active-high enable input provides deterministic segment control, while the 5.5 V-tolerant I2C and enable inputs provide additional interface margin when connected to compatible industrial peripherals.

📊

Precision Data Acquisition Bus

The PCA9515ADG4 can organize precision converters and sensors on a segmented I2C bus without changing the host protocol. Its 400 kHz capability accommodates the intended bus rate, while the 113 ns propagation delay and 7 pF input capacitance provide concrete values for timing and loading calculations. Place the repeater between the controller and the acquisition section, provide independent pull-ups on both segments, and verify that converter address pins, sample timing, and required data rates remain unaffected.

🔋

Battery-Powered Sensor Node

The PCA9515ADG4 suits a battery-powered sensor node where bus loading and standby consumption influence the power budget. Its specified supply current of 500 µA and 2.3 V to 3.6 V operating range align with common embedded supply systems. The active-high enable input can disable the repeated segment during inactive periods, although the external pull-up network and attached devices should also be evaluated for their own standby leakage and rail behavior.

⚡

Power and Current Monitoring System

The PCA9515ADG4 can isolate a group of power-monitoring and current-sensing peripherals from a main control bus. The two bidirectional channels support separate repeated paths where needed, and the active-high enable permits deliberate bus-segment control. A 400 kHz rating provides ample margin for supervisory data traffic, while the 113 ns delay, 7 pF input capacitance, and 2.3 V to 3.6 V supply range make the repeater suitable for deterministic embedded monitoring networks.

What is the PCA9515ADG4?
The PCA9515ADG4 is a Texas Instruments dual-channel bidirectional I2C and SMBus repeater designed for operation from 2.3 V to 3.6 V. According to the manufacturer datasheet, its two identical open-drain buffer channels support bus rates up to 400 kHz. The device is packaged in 8-SOIC and includes an active-high enable input for isolating or controlling the repeated bus segment.
What is the operating voltage of PCA9515ADG4?
The PCA9515ADG4 operates from 2.3 V to 3.6 V. The manufacturer datasheet also identifies its I2C I/O and enable input as 5.5 V tolerant, allowing those inputs to remain compatible with higher-voltage bus signaling while the device supply stays within the specified operating range. Verify the voltage requirements of every attached bus device before applying a higher I/O voltage.
Where can I download the PCA9515ADG4 datasheet PDF?
The PCA9515ADG4 datasheet PDF is available through the linked FindIC documentation page and the Texas Instruments product documentation. The manufacturer datasheet is the controlling reference for pin assignments, electrical characteristics, timing, and recommended application circuits. Use the PDF together with the device’s 8-SOIC package drawing when assigning PCB tracks and checking the 400 kHz timing limits.
Where can I find the PCA9515ADG4 pinout and package information?
The PCA9515ADG4 uses an 8-SOIC package measuring 0.154 inch, or 3.90 mm, in body width. Its package drawing and the pin-description table in the manufacturer datasheet should be used together to identify the supply, enable, and two bidirectional channel pins. Do not infer the complete pin map from another PCA9515A package suffix, because body styles and lead arrangements can differ.
How fast can the PCA9515ADG4 I2C bus operate?
The PCA9515ADG4 is specified for I2C and SMBus operation at up to 400 kHz. According to the manufacturer datasheet, the device has a 113 ns propagation delay and 7 pF input capacitance. Actual bus rate also depends on pull-up resistance, total bus capacitance, peripheral sink current, cable length, and the timing margins of the devices on both sides of the repeater.
Can PCA9515ADG4 isolate an I2C bus segment?
Yes, the PCA9515ADG4 can isolate an I2C bus segment by placing its active-high enable input in the inactive state and connecting the buffer between separate master-side and peripheral-side pull-up networks. Each side requires its own pull-up arrangement because the internal channels are open-drain. The enable input is 5.5 V tolerant, but the device supply must remain between 2.3 V and 3.6 V.
What is the difference between PCA9515ADG4 and PCA9515ADR?
The PCA9515ADG4 and PCA9515ADR are both described as dual-channel bidirectional I2C repeaters operating from 2.3 V to 3.6 V, and both use an 8-SOIC format. Their electrical role is therefore closely aligned for PCB-level substitution. Confirm the manufacturer ordering information, pin descriptions, temperature range, and exact package drawing before treating PCA9515ADR as a production replacement.
PCA9515ADG4 vs PCA9515APWRG4 - which one fits an 8-SOIC PCB?
The PCA9515ADG4 is the correct choice for an 8-SOIC PCB because that is its documented package format. The PCA9515APWRG4 belongs to the PCA9515A family but uses a different narrow package, so it is not a footprint-compatible substitute for an existing 8-SOIC layout. The manufacturer datasheet and package drawings should be compared before any different package option is considered.
When should I choose PCA9515ADG4 over TCA9517?
Choose the PCA9515ADG4 when the design specifically requires two bidirectional open-drain I2C channels in an 8-SOIC footprint with a 2.3 V to 3.6 V supply range. A Texas Instruments support response identifies the TCA9517 as a close functional alternative, but it notes that the TCA9517 has separate VCCA and VCCB pins and requires board changes involving pin 1. It is therefore not a drop-in replacement.
What can replace the PCA9515ADG4?
The closest supported drop-in reference is the Texas Instruments PCA9515ADR, which uses the same 8-SOIC package format and has the same dual bidirectional repeater function and 2.3 V to 3.6 V operating range. No additional same-package alternatives could be substantiated without introducing a packaging-only variant or a device with a different footprint. Validate the candidate against the manufacturer pin table and timing limits before production use.
Is there a cross-brand drop-in replacement for PCA9515ADG4?
No cross-brand drop-in replacement could be substantiated for the PCA9515ADG4 from the available cross-reference records. The identified functional alternatives either differ in package, use a different supply arrangement, or require PCB changes, so they do not satisfy the requirement for the same footprint and pin-to-pin compatibility. Use the Request a Quote form on this page when sourcing the exact device or a specifically approved alternate.
Is the PCA9515ADG4 suitable for industrial embedded systems?
The PCA9515ADG4 is suitable for industrial embedded systems that use 2.3 V to 3.6 V I2C or SMBus signaling. Its 2-channel bidirectional architecture, 400 kHz capability, 500 µA supply current, and industrial temperature-grade classification support compact embedded control boards. Confirm the exact temperature limits and production-status requirements against the manufacturer datasheet for the deployed environmental conditions.
How should pull-up resistors be arranged around PCA9515ADG4?
Install separate pull-up resistors on the master-side and peripheral-side I2C segments, with the PCA9515ADG4 placed between those two networks. Because the channels are open-drain, the device does not actively drive a high voltage; it connects or releases the bus path. Calculate each pull-up value from segment capacitance, sink current, rise time, and the 400 kHz timing requirement rather than using one resistor value for both sides automatically.
Where can I buy PCA9515ADG4 online?
The PCA9515ADG4 can be requested through the Request a Quote form on this page. The form supports exact-MPN sourcing, quantity requirements, and lead-time inquiries without relying on a static price table. Confirm that the quotation identifies PCA9515ADG4, the 8-SOIC package, and the desired delivery quantity so that an assembly or tape-and-reel variant is not substituted unintentionally.
What is the price and lead time of PCA9515ADG4?
Current unit pricing and production lead time for PCA9515ADG4 should be confirmed through the Request a Quote form on this page. Lead time can depend on the exact package, assembly quantity, and current factory allocation, so a historical listing should not be treated as a current availability commitment. The form lets the buyer state quantity, target date, and shipment requirements in one request.
What are the key specifications of PCA9515ADG4 that engineers should know?
The PCA9515ADG4 is a 2.3 V to 3.6 V, dual-channel, bidirectional open-drain I2C and SMBus repeater rated for 400 kHz operation. The manufacturer datasheet specifies 113 ns propagation delay, 7 pF input capacitance, 500 µA supply current, 5.5 V-tolerant I2C and enable inputs, and an 8-SOIC package. These characteristics determine bus loading, timing margin, pull-up selection, and PCB compatibility.

Datos de referencia de ingeniería para PCA9515ADG4 — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose the PCA9515ADG4 when the board needs a compact, dual-channel I2C or SMBus repeater operating from 2.3 V to 3.6 V at up to 400 kHz. It is particularly appropriate when capacitive loading, cable routing, or a group of peripherals requires the bus to be divided into separately pulled-up sections. Choose the PCA9515ADR when it is the approved source for the same 8-SOIC footprint and equivalent dual-channel, 2.3 V to 3.6 V repeater function. Do not choose PCA9515APWRG4 for an existing 8-SOIC PCB because its package differs, and do not treat the TCA9517 as a drop-in replacement because its separate supply pins require board changes. Before release, verify the manufacturer pin table, exact temperature grade, timing limits, pull-up values, and enable behavior against the selected part.

Comparación con alternativas

Parámetro Este producto PCA9515ADR
Brand Texas Instruments Texas Instruments
Package 8-SOIC 8-SOIC
Product Type Dual bidirectional I2C/SMBus repeater Dual bidirectional I2C/SMBus repeater
Channel Count 2 channels 2 channels
Operating Supply Voltage 2.3 V to 3.6 V 2.3 V to 3.6 V
Maximum Bus Frequency 400 kHz 400 kHz
I/O Architecture Bidirectional open-drain Bidirectional open-drain

Diferenciadores clave

  • Same-package 8-SOIC replacement path (frente a PCA9515ADR)
  • Bidirectional bus handling in one compact IC (frente a TCA9517)
  • Fast-mode I2C operation (frente a PCA9515ADR)

Notas de diseño

Place the PCA9515ADG4 at the physical boundary between the controller-side and peripheral-side I2C networks. Route each bidirectional channel as a continuous signal path between its corresponding pins, and keep the two sides electrically separated until they reach the repeater. The 7 pF input capacitance contributes to each segment's effective loading, so avoid unnecessary stubs and keep the repeated devices away from long connector or cable branches.

Use separate pull-up resistors on the two sides of the repeater and calculate each value from that segment's capacitance, sink-current requirement, and target 400 kHz rise time. Do not assume that the pull-ups can be shared across the buffered boundary. The device supply must remain between 2.3 V and 3.6 V, while the 5.5 V tolerance applies to the specified I2C I/O and enable inputs rather than creating permission to exceed the supply rating.

Do not substitute a narrow-body package option such as PCA9515APWRG4 into an 8-SOIC footprint, and do not treat the TCA9517 as a drop-in part because its separate supply pins require board changes. Confirm the exact pin assignments and package drawing in the manufacturer datasheet before production release. Also ensure that the enable signal has a defined state during reset and power-up so the downstream bus segment cannot be left partially enabled.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The PCA9515ADG4 is described as industrial grade. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the manufacturer product documentation.

Datos verificados el: 2026-11-19 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

PCA9515ADG4 datasheet PCA9515ADG4 pinout PCA9515ADG4 datasheet pdf PCA9515ADG4 equivalent PCA9515ADG4 replacement PCA9515ADG4 cross reference PCA9515ADG4 vs PCA9515ADR PCA9515ADG4 price PCA9515ADG4 stock Texas Instruments PCA9515ADG4 PCA9515ADG4 8-SOIC pinout PCA9515ADG4 application circuit PCA9515ADG4 I2C repeater PCA9515ADG4 400kHz

Componentes & términos relacionados

Texas Instruments PCA9515ADG4 PCA9515ADR PCA9515APWRG4 TCA9517 I2C repeater SMBus repeater bidirectional buffer open-drain buffer interface IC bus-management IC semiconductor I2C SMBus BiCMOS 400 kHz fast-mode I2C 8-SOIC SOIC package family surface-mount package bidirectional channel repeater enable bus capacitance pull-up resistor propagation delay
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ