NXP Semiconductors

PCA9564N - 400 kHz Parallel-to-I2C Controller | NXP

N.º de pieza: PCA9564N ✓ Activo
20-pin DIP Package
MOQ: 1 |

PCA9564N Descripción general

NXP Semiconductors PCA9564N is a bidirectional parallel-bus to I2C-bus controller designed to connect parallel microprocessor interfaces with I2C peripheral devices. It supports I2C transfer rates up to 400 kHz and is offered in a 20-pin DIP through-hole package. The device provides a practical interface bridge for systems in which a parallel processor bus must communicate with serial I2C peripherals.

A parallel-to-I2C controller is an interface IC that translates data transactions between two different bus architectures. The parallel side presents a simple processor-oriented interface, while the I2C side provides standardized two-wire communication with sensors, memory devices, converters, and other peripherals. In the broader semiconductor hierarchy, the PCA9564N belongs to the interface-controller family within interface ICs and acts as a bridge between parallel microprocessor systems and serial bus devices.

The principal features of the PCA9564N include bidirectional parallel-bus operation, I2C controller functionality, and a maximum I2C transfer rate of 400 kHz. Bidirectional operation allows the controller to participate in transactions in which information must move between the parallel host and connected I2C devices. Its 400 kHz capability suits general-purpose industrial embedded-control systems that require faster transfer rates than standard 100 kHz I2C operation while retaining a compact peripheral-controller architecture.

The NXP manufacturer datasheet describes PCA9564N as a parallel-bus to I2C-bus controller. Its function is intended to simplify connection between parallel microprocessors and I2C devices without requiring each software stack to implement the complete bus conversion itself. Application-specific protocol overhead, addressing, interrupt handling, and timing behavior should be implemented and verified against the manufacturer pin-description and timing information before a production design is released.

Typical applications include industrial instrument panels, embedded control modules, legacy peripheral expansion, data-acquisition equipment, and board-level systems that retain a parallel processor interface while adding I2C sensors or memory. The 20-DIP package is particularly suitable for through-hole industrial assemblies and prototypes where leaded-package handling is preferred over fine-pitch surface-mount assembly.

For PCB implementation, follow the manufacturer datasheet pin-description table when assigning the parallel data lines, control signals, address inputs, clock, and I2C connections. Confirm pull-up requirements, decoupling, address selection, signal timing, and unused-pin treatment in the system schematic. Because the exact public pin map is not reproduced on this page, use the NXP datasheet as the authoritative source for board-layout signoff.

This product record combines the manufacturer product-page description, the 400 kHz interface rate, package information, application guidance, and a structured engineering comparison with practical implementation notes. These details help engineers determine whether PCA9564N fits a through-hole parallel-to-I2C bridging requirement before reviewing detailed timing, electrical limits, and ordering information in the manufacturer documentation.

Alternativas directas para PCA9564N — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

PCA9564N,112

✅ Sustitución directa
📦 DIP-20
Identical device and 20-pin DIP outline; differs only in NXP's ordering suffix for tube (bulk) packing, electrical ratings and pinout are unchanged

📋 Alternativa de referencia (no en el catálogo)

PCA9564

✅ Sustitución directa
📦 DIP-20
Base catalog number of the same parallel bus to I2C-bus controller; same 20-pin DIP footprint, same 2.5 V/3.3 V Parallel/I2C/SMBus interface, no functional difference

📋 Alternativa de referencia (no en el catálogo)

PCA9564N

✅ Sustitución directa
NXP Semiconductors
📦 DIP-20
Parallel bus to I2C-bus controller · 400 kHz · Bidirectional parallel bus to I2C bus · 20-pin DIP · DIP family · Through-hole · 20 terminals · Rectangular

Consulte el precio

Ver hoja de datos →

PCA9564N Especificaciones

Product Type Parallel bus to I2C-bus controller
Maximum I2C Transfer Rate 400 kHz
Bidirectional Interface Bidirectional parallel bus to I2C bus
Package Type 20-pin DIP
Package Family DIP family
Tipo de montaje Through-hole
Number of Terminals 20 terminals
Package Shape Rectangular
Temperature Grade Industrial

Guía de configuración de pines de PCA9564N rectangular

Configuración de pines para PCA9564N (encapsulado rectangular). La numeración de pines, las funciones y los diagramas de conexión se definen en la hoja de datos del fabricante. Consúltela para conocer el footprint exacto y las directrices de soldadura.

Diagrama de patillaje del encapsulado rectangular para PCA9564N

No hay datos detallados de patillaje disponibles para PCA9564N.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

PCA9564N es adecuado para 6 aplicacións: Industrial Sensor Interface Expansion, Legacy Parallel-System I2C Expansion, Data-Acquisition Front End, Instrument Panel and Human-Machine Interface, Embedded Memory and Peripheral Expansion, Board-Level System Upgrade.

🏭

Industrial Sensor Interface Expansion

PCA9564N fits industrial controller boards that retain a parallel microprocessor interface but need to add I2C-based sensors. The controller bridges the parallel host bus to the two-wire serial bus and supports transfer rates up to 400 kHz. Place it between the processor bus and shared I2C peripheral devices, then implement sensor commands, address decoding, and error recovery in firmware. Its 20-pin through-hole DIP package supports leaded industrial assembly methods. Before layout release, verify pin assignment, voltage levels, address selection, bus pull-ups, and timing against the NXP manufacturer datasheet.

🔧

Legacy Parallel-System I2C Expansion

Use PCA9564N when an established parallel-bus controller needs access to serial peripherals without replacing the host processor architecture. The bidirectional parallel-to-I2C controller allows bus transactions to pass between the processor and attached I2C components at rates up to 400 kHz. This approach can shorten hardware-development effort by reusing a familiar parallel interface while adding modern serial sensors or memory. The 20-DIP through-hole format is useful for legacy chassis and industrial boards assembled with conventional through-hole processes. Confirm protocol timing, reset behavior, and unused-pin treatment in the manufacturer documentation.

📊

Data-Acquisition Front End

PCA9564N can provide the communication bridge between a parallel data-acquisition controller and I2C measurement peripherals. Supporting up to 400 kHz gives the design enough bus bandwidth for many moderate-rate sensor and converter transactions. Engineers can organize firmware around device addressing, command writes, and sequential data reads while retaining the processor's parallel bus interface. The through-hole 20-pin DIP package is suitable for instrument prototypes and industrial control cards. Validate acquisition timing, signal settling, pull-up values, and grounding with the application schematic and NXP timing data before production release.

🖥️

Instrument Panel and Human-Machine Interface

PCA9564N is suited to instrument panels that combine a legacy parallel control processor with I2C display drivers, key controllers, or configuration peripherals. The bidirectional controller allows the host processor to exchange commands and status data with serial devices while maintaining a straightforward parallel-bus connection. Its 400 kHz transfer rate supports many control-oriented peripheral transactions, and the 20-DIP package facilitates through-hole assembly and serviceable industrial hardware. Design the firmware to separate bus arbitration, peripheral addressing, and display updates, and verify all signal levels and timing in the manufacturer datasheet.

🖥️

Embedded Memory and Peripheral Expansion

PCA9564N can connect a parallel processor subsystem to I2C EEPROM, serial memory, converters, and other compact peripherals. The 400 kHz maximum transfer rate is suitable for moderate-volume configuration data and routine control traffic, while the bidirectional interface keeps the host-side connection independent of the I2C wire protocol. Use address pins or firmware-defined device selection as directed by the NXP datasheet, and account for pull-up resistors and bus capacitance on the shared I2C segment. The 20-pin DIP package is practical for industrial boards and prototypes where surface-mount conversion would add unnecessary layout work.

⚡

Board-Level System Upgrade

PCA9564N offers a practical upgrade path for boards that need modern I2C peripherals while retaining a parallel microprocessor interface. Instead of designing a separate serial-to-parallel subsystem, the device provides a defined controller function with operation up to 400 kHz. It can support staged development of new sensor, memory, or communication options without replacing the existing host logic. Because the package is a 20-pin through-hole DIP, designers should compare its mechanical footprint with the target board and preserve access for inspection and rework. Confirm logic thresholds, timing margins, address mapping, and power requirements before fabrication.

What is the PCA9564N?
The NXP Semiconductors PCA9564N is a bidirectional parallel-bus to I2C-bus controller that connects a parallel microprocessor interface with I2C peripheral devices. According to the NXP manufacturer datasheet, the device is intended for parallel-to-I2C interfacing and supports transfer rates up to 400 kHz. It is packaged as a 20-pin DIP for through-hole assemblies.
What is the maximum I2C transfer rate of PCA9564N?
The PCA9564N supports I2C transfer rates up to 400 kHz. NXP identifies the device as a bidirectional parallel-bus to I2C-bus controller on its official product page. This rate makes it suitable for industrial embedded systems that need to communicate with I2C sensors, memory, and other peripherals at twice the conventional 100 kHz I2C rate.
What package does the PCA9564N use?
The PCA9564N uses a 20-pin DIP package with through-hole mounting. The NXP product listing identifies the device as a parallel-bus to I2C-bus controller, while the distributor product record specifies a 20-DIP package. The through-hole format is useful for industrial controller boards, prototypes, and assemblies assembled with conventional leaded components.
Where can I download the PCA9564N datasheet PDF?
The official PCA9564N datasheet PDF is linked from the NXP product page at https://www.nxp.com/part/PCA9564N. The NXP manufacturer datasheet is the preferred source for the pin-description table, electrical limits, timing characteristics, operating conditions, and application circuit. Use that document to validate board connections before releasing a PCB layout.
Where can I find the PCA9564N pinout?
The PCA9564N pinout is defined in the pin-description table of the NXP manufacturer datasheet. The device is a 20-pin DIP, so its PCB footprint must provide all 20 leads and follow the package orientation shown by the manufacturer drawing. Assign the parallel bus, control signals, address selection, clock, and I2C lines directly from that table.
Is PCA9564N suitable for connecting a parallel processor to an I2C sensor?
Yes, PCA9564N is suitable when a parallel processor must communicate with an I2C sensor or other serial peripheral. Its bidirectional parallel-to-I2C architecture handles the bus-format difference, and its 400 kHz transfer capability provides a suitable communication rate for many industrial embedded-control systems. Firmware must still implement the sensor's command and data protocol.
How is PCA9564N different from PCA9564D,118?
The PCA9564N is supplied in a 20-pin through-hole DIP package, while PCA9564D,118 is identified as a 20-pin TSSOP surface-mount variant. The device descriptions indicate consistent parallel-bus to I2C controller functionality, but the physical packages are not drop-in compatible. A PCB redesign is required when moving between these package options.
What is the best drop-in replacement for PCA9564N?
No verified drop-in replacement for PCA9564N was identified in the available cross-reference results. The specifically referenced PCA9564D,118 uses a different 20-pin TSSOP package rather than the PCA9564N 20-pin DIP package, so it cannot replace the device without changing the PCB footprint. Confirm the pin arrangement and electrical requirements in the NXP datasheet before selecting a substitute.
Can PCA9564D,118 replace PCA9564N without a PCB change?
No, PCA9564D,118 cannot directly replace PCA9564N without a PCB change because the packages differ: PCA9564N is a through-hole DIP and PCA9564D,118 is a surface-mount TSSOP. Although the interface-controller functions are consistent, mechanical compatibility and physical interchangeability are not established by the comparison record.
When should I choose PCA9564N over another parallel-to-I2C controller?
Choose PCA9564N when the design needs a through-hole 20-pin DIP implementation of a bidirectional parallel-to-I2C controller operating up to 400 kHz. A surface-mount controller may be preferable for compact modern boards, but it will not share this DIP footprint. The final choice should also consider logic voltage, address count, timing, lifecycle, and I2C peripheral requirements.
Is PCA9564N suitable for industrial embedded control systems?
Yes, PCA9564N is identified as an industrial-temperature-grade, through-hole interface controller. Its 400 kHz I2C rate and bidirectional parallel-bus architecture suit legacy or industrial controller boards that need to retain a parallel host interface while adding I2C peripherals. Complete system qualification still requires checking the full operating-temperature range and electrical limits in the manufacturer datasheet.
What are the key specifications of PCA9564N that engineers should know?
The key PCA9564N specifications are its parallel-bus to I2C-bus controller function, bidirectional operation, 400 kHz maximum I2C transfer rate, 20-pin DIP package, and through-hole mounting. The device is listed with an industrial temperature grade. Its NXP product page and manufacturer datasheet are the authoritative sources for these characteristics and for electrical and timing details.
How does PCA9564N support I2C peripherals in embedded systems?
PCA9564N translates transactions between a parallel processor bus and a two-wire I2C bus. The parallel side provides a processor-oriented control and data path, while the I2C side communicates with sensors, memory, and other serial peripherals at rates up to 400 kHz. Application software must manage device addressing, command sequencing, and data interpretation.
Where can I request a quote for PCA9564N?
Use the Request a Quote form on this page to request current PCA9564N pricing, stock confirmation, lead time, and minimum-order details. Quote-based purchasing also allows the buyer to specify the required package and shipment quantity. The manufacturer part number to enter is PCA9564N.
What is the price of PCA9564N?
Current PCA9564N pricing depends on order quantity, supply status, and required package. Use the Request a Quote form on this page to obtain the current unit and volume-break information for the PCA9564N order code. No fixed price should be inferred from general distributor or aggregator pages because their quantity and availability conditions can change.
What is the lead time and stock status for PCA9564N?
Current stock and lead time for PCA9564N should be confirmed through the Request a Quote form on this page. The form captures the requested quantity and shipping destination so the procurement team can establish component availability, manufacturing lead time, and delivery terms. Use the NXP ordering information for the exact package suffix required by the assembly.
Is PCA9564N RoHS compliant?
The RoHS status of PCA9564N should be confirmed from the manufacturer product documentation before making a compliance declaration. The device is a 20-pin DIP industrial interface controller, but package and compliance status must be tied to the exact ordering code. Use the NXP product page and its environmental or material declaration documentation for formal qualification.

Datos de referencia de ingeniería para PCA9564N — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose PCA9564N when a new or legacy industrial board needs a bidirectional parallel-processor to I2C bridge implemented in a 20-pin through-hole DIP, with operation up to 400 kHz. It is particularly practical where the existing host logic is parallel-oriented and adding a serial controller is simpler than redesigning the processor interface. The package supports conventional leaded assembly and is easier to inspect or replace than a fine-pitch surface-mount option. Do not choose PCA9564D,118 as a direct substitute because its TSSOP package requires a different PCB footprint. Before final selection, verify the exact supply voltage, logic thresholds, address capability, operating-temperature limits, timing, and environmental compliance against the NXP manufacturer datasheet. If the design is new and does not need a DIP footprint, evaluate surface-mount controllers independently, since no verified drop-in alternatives were established for PCA9564N.

Comparación con alternativas

Parámetro Este producto
Product Type Parallel bus to I2C-bus controller
Bidirectional Interface Yes
Maximum I2C Transfer Rate 400 kHz
Package 20-pin DIP
Brand NXP Semiconductors
Mounting Type Through-hole
Temperature Grade Industrial
Number of Terminals 20 terminals
Package Shape Rectangular

Notas de diseño

Assign every one of the 20 PCA9564N leads directly from the NXP manufacturer datasheet pin-description table, including address inputs, control signals, clock, ground, supply, and the I2C lines. Preserve the package orientation and lead spacing shown by the NXP mechanical drawing. Do not infer unused-pin treatment from generic DIP conventions because an electrically unused input can still require a defined bias in the system design.

Do not treat PCA9564D,118 as a drop-in replacement for PCA9564N. The PCA9564N uses a 20-pin through-hole DIP, whereas PCA9564D,118 is a 20-pin TSSOP surface-mount option. Although both are associated with the parallel-to-I2C controller family, changing package technology requires a PCB redesign and a fresh review of land patterns, assembly process, pin orientation, and electrical compatibility.

Design the shared I2C segment for the peripheral population and cable or PCB length. Add the pull-up network where required by the manufacturer's interface guidance, place it within the electrical reach of the bus, and check rise-time behavior at the maximum 400 kHz operating rate. Keep the parallel data and control routes away from sensitive analog inputs to reduce coupling into the sensor or converter interface.

Verify the PCA9564N logic supply range, input thresholds, output levels, and current consumption in the NXP manufacturer datasheet before assigning rails. Decouple the supply close to the device with the capacitance recommended by the datasheet, and provide compatible levels to every connected parallel and I2C peripheral. Mixed 2.5 V and 3.3 V systems require level review rather than assuming direct compatibility.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The verified product information identifies an industrial-temperature-grade interface IC but does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable to this industrial interface controller unless the manufacturer later designates a qualified automotive variant.

Datos verificados el: 2026-11-10 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

PCA9564N datasheet PCA9564N datasheet pdf PCA9564N pinout PCA9564N equivalent PCA9564N replacement PCA9564N cross reference PCA9564N 20-DIP package PCA9564N 400 kHz controller NXP PCA9564N parallel I2C PCA9564N industrial sensor interface PCA9564N vs PCA9564D,118 PCA9564N price PCA9564N stock PCA9564N application circuit

Componentes & términos relacionados

NXP Semiconductors PCA9564N PCA9564D,118 parallel-bus to I2C-bus controller parallel bus I2C bus bidirectional interface controller interface IC bus bridge 400 kHz I2C 20-pin DIP DIP package family through-hole mounting industrial temperature grade I2C peripheral embedded control system data acquisition parallel microprocessor I2C pull-up resistor semiconductor
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ