Texas Instruments

PCM1600YG4 - 24-Bit 6-Channel 96kHz DAC | Texas Instruments

N.º de pieza: PCM1600YG4 ✓ Activo
Analog and digital Vdss 48-LQFP Package
MOQ: 1 |

PCM1600YG4 Descripción general

The Texas Instruments PCM1600YG4 is a 24-bit, 6-channel digital-to-analog converter that supports audio sampling rates up to 96kHz. The device uses a serial data interface and separate analog and digital supply connections, making it suitable for multichannel consumer, communications, and industrial audio systems. It is housed in a 48-lead LQFP package with gull-wing leads.

A DAC is an audio data-conversion IC that accepts digital PCM samples and produces corresponding analog voltage signals. Within the broader semiconductor hierarchy, the PCM1600YG4 is an audio DAC, a data-converter IC, and a signal-processing device used between digital audio sources and downstream analog amplification or line-output circuitry.

The six-channel architecture reduces the number of separate converters required for surround-sound, home-theater, or multi-zone audio designs. Its 24-bit data resolution supports detailed digital audio representation, while operation up to a 96kHz sampling rate accommodates high-resolution audio streams. The serial interface reduces the number of data connections required between the DAC and a digital audio controller.

The PCM1600YG4 is identified as an enhanced multilevel delta-sigma digital-to-analog converter. This architecture is appropriate for audio-frequency signal generation because it provides a digital conversion path designed for high-resolution multichannel playback. The device accepts both analog and digital supply sources, allowing the system designer to manage noisy digital and sensitive analog supply domains separately.

Typical uses include home-theater audio, multichannel receivers, digital active speakers, AV receivers, soundbars, and professional audio equipment requiring six simultaneous analog outputs. The 48-LQFP package also provides adequate pin count for dedicated analog outputs, digital control signals, and power-related connections in a conventional PCB design.

Layout is critical because analog output stages can be affected by switching noise and ground-current coupling. Place analog and digital supply decoupling according to the manufacturer datasheet, route the six analog output channels away from high-current digital paths, and use a quiet ground strategy for the analog section. Confirm output-buffer loading, digital-interface levels, and supported operating modes before finalizing the schematic.

This product page combines the verified device identity and package details with practical integration guidance for multichannel audio systems. It also identifies replacement constraints clearly, explains where the manufacturer documentation should be consulted, and organizes the PCM1600YG4 specifications for rapid engineering review and sourcing.

Alternativas directas para PCM1600YG4 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

No hay alternativas directas disponibles para este producto.

Solicitar alternativas

PCM1600YG4 Valores máximos y características eléctricas

Converter Type 24-bit, 6-channel audio digital-to-analog converter
Architecture Enhanced multilevel delta-sigma DAC
Resolución 24 bit
Number of Channels 6 channels
Maximum Sampling Rate 96 kHz
Data Interface Serial
Supply Sources Analog and digital
Rango de temperatura de funcionamiento 0°C to 70°C
Temperature Grade Commercial
Encapsulado 48-LQFP
Package Code LFQFP
Package Shape Square
Terminal Form Gull wing
Number of Terminals 48
Packaging Tube
Tipo de montaje Surface mount

Guía de configuración de pines de PCM1600YG4 square

Configuración de pines para PCM1600YG4 (encapsulado square). Este componente analógico presenta pines de entrada, salida y alimentación. Consulte la hoja de datos del fabricante para conocer las configuraciones de los pines de ajuste de offset, compensación y habilitación. Ideal para circuitos de acondicionamiento de señal y amplificadores.

Diagrama de patillaje del encapsulado square para PCM1600YG4

No hay datos detallados de patillaje disponibles para PCM1600YG4.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

PCM1600YG4 es adecuado para 6 aplicacións: Home-Theater Audio Receiver, Multichannel Soundbar, Digital Active Speaker, Professional Audio Interface, Automotive Infotainment Audio, Industrial Audio Control System.

🎧

Home-Theater Audio Receiver

The PCM1600YG4 fits a home-theater receiver because it provides six analog output channels from one 24-bit converter with operation up to a 96kHz sampling rate. It can receive multichannel audio from an I2S-compatible processor and generate the front-left, front-right, center, surround-left, surround-right, and rear or subwoofer-related signals used by the receiver architecture. The serial interface reduces the number of connections between the digital audio engine and the analog output stage. Designers should confirm output scaling, mute behavior, clocking, and the required bass-management routing in the system controller. The manufacturer datasheet remains the controlling reference for pin assignment, supply sequencing, analog output loading, and supported data formats.

🔊

Multichannel Soundbar

A soundbar can use the PCM1600YG4 to create six amplified audio channels from a compact digital audio subsystem. Its 24-bit resolution preserves high-resolution source data, while the 96kHz sampling-rate capability supports professionally mastered high-resolution material. The device is placed after the soundbar's digital audio processor and before the line-level amplifier inputs. The main design constraints are analog-output loading, clock jitter, output scaling, and separation of the converter's analog and digital supply domains. Confirm the supported serial interface, master-clock requirements, mute timing, and channel mapping against the Texas Instruments manufacturer datasheet before PCB release.

🎵

Digital Active Speaker

The PCM1600YG4 is suitable for a digital active speaker that accepts digital audio over a serial link and produces analog line signals for power amplifiers. Six outputs permit separate conversion for multiple drivers or zones without requiring six discrete converter packages. Its 24-bit data path and 96kHz maximum sampling rate align with high-resolution playback systems, while the 48-LQFP package simplifies routing around a conventional audio processor. The system designer must verify master-clock generation, data alignment, analog output full-scale behavior, and amplifier input impedance. Short analog traces and a carefully partitioned ground plane are important for preserving low-level audio fidelity.

🎚️

Professional Audio Interface

A professional multi-channel audio interface can employ the PCM1600YG4 for analog monitoring outputs when the design requires 24-bit conversion at rates up to 96kHz. The converter accepts serial digital audio from a DSP or field-programmable logic array and provides six analog channels for mixing, monitoring, or line-level routing. The Texas Instruments manufacturer datasheet should establish the exact interface mode, clocking scheme, supported sampling rates, and output architecture. Engineers should also evaluate output drive against the next analog stage, use separate supply filtering, and verify that the commercial 0°C to 70°C range meets the intended equipment environment.

🚗

Automotive Infotainment Audio

The PCM1600YG4 can serve as the digital-to-analog conversion element in an automotive infotainment head unit when its electrical and environmental requirements are acceptable for the installation. Six analog channels support zone-based cabin audio, navigation prompts, and conventional entertainment paths, while 24-bit data at up to 96kHz accommodates high-resolution audio streams. Because the specified device is commercial grade with a 0°C to 70°C operating range, the final vehicle platform must verify temperature, vibration, transient, and supplier-qualification requirements. Use the manufacturer datasheet for supply tolerances, clocking, reset behavior, and channel routing rather than relying on general audio-converter assumptions.

🏭

Industrial Audio Control System

The PCM1600YG4 can provide multiple synchronized analog outputs in an industrial audio-control system that distributes machine-status tones, voice prompts, or multichannel monitoring audio. Its six-channel architecture reduces converter count, and the serial interface allows a central controller to supply channel-consistent digital samples. The converter must operate within its commercial 0°C to 70°C specification, which may require enclosure temperature control in industrial equipment. The design should use the manufacturer datasheet to establish supported clock modes, data synchronization, output muting, and power requirements. Printed-circuit layout should isolate analog outputs from relay, motor, and switching-supply return currents.

What are the key specifications of PCM1600YG4 that engineers should know?
The PCM1600YG4 is a 24-bit, 6-channel audio DAC with a serial interface and operation up to a 96kHz sampling rate. According to the Texas Instruments manufacturer datasheet, it uses an enhanced multilevel delta-sigma architecture and is packaged in a 48-LQFP with separate analog and digital supply sources. Its commercial operating-temperature range is 0°C to 70°C, and the specified shipping format is a tube. These parameters make it primarily relevant to multichannel audio systems requiring six analog output channels.
Where can I download the PCM1600YG4 datasheet PDF?
The PCM1600YG4 datasheet PDF is available from the official Texas Instruments product documentation at https://www.ti.com/lit/ds/symlink/pcm1600.pdf. The document contains the authoritative pin descriptions, supply requirements, digital interface format, analog output characteristics, and recommended application circuit. Use the package drawing and pin-description table for PCB layout because the search listing alone confirms a 48-LQFP package but does not reproduce the individual terminal assignments.
Where can I find the PCM1600YG4 pinout?
The PCM1600YG4 pinout is documented in the Texas Instruments manufacturer datasheet and should be assigned from its 48-terminal pin-description table. The device uses a square 48-LQFP package with gull-wing leads, but individual pin names are not reproduced on this page. Cross-check the exposed or unused terminals, analog outputs, digital interface, reset and mode signals, and supply connections against the datasheet before routing the PCB.
How many audio channels and bits does PCM1600YG4 support?
The PCM1600YG4 supports six audio channels and 24-bit digital audio data. According to the Texas Instruments manufacturer datasheet, the converter operates at sampling rates up to 96kHz and accepts data through a serial interface. The six-channel configuration allows one converter to serve surround-sound and other multichannel systems, while the 24-bit width preserves high-resolution source information for the analog output stage.
What type of DAC is the PCM1600YG4?
The PCM1600YG4 is an enhanced multilevel delta-sigma digital-to-analog converter. According to the Texas Instruments manufacturer datasheet, it converts six channels of 24-bit serial audio data into analog outputs and supports sampling rates up to 96kHz. This converter architecture is intended for audio signal generation rather than instrumentation-oriented high-resolution conversion, so its digital input and analog output characteristics should be evaluated together.
What package and operating temperature does PCM1600YG4 use?
The PCM1600YG4 uses a 48-LQFP package with 48 gull-wing terminals and is specified for commercial temperatures from 0°C to 70°C. According to the Texas Instruments manufacturer datasheet and product descriptions, it is a surface-mount device supplied in a tube. The 48-lead package accommodates the six analog output channels as well as digital control, clock, data, and power connections.
Is PCM1600YG4 suitable for home-theater and surround-sound systems?
The PCM1600YG4 is suitable for home-theater and surround-sound systems because it provides six analog output channels from one converter. According to the Texas Instruments manufacturer datasheet, it supports 24-bit audio and sampling rates up to 96kHz. It can sit between an I2S-compatible digital audio processor and six line-output channels, provided the designer verifies interface timing, output loading, analog supply voltage, and amplifier input requirements.
PCM1600YG4 vs PCM1602A - which is better for multichannel audio?
The PCM1600YG4 is the established choice for a six-channel, 24-bit, 96kHz audio DAC in a 48-LQFP package. A PCM1602A may be considered only after its datasheet confirms the required channel count, sampling rate, pinout, supply voltage, and digital interface are identical. The public cross-reference information does not establish a verified pin-to-pin match, so the PCM1602A should not be treated as a drop-in replacement without a direct datasheet comparison.
Can PCM1600YG4 replace a six-channel DAC in an existing PCB?
A PCB designed specifically for the PCM1600YG4 can accept the part without a footprint change because it uses the specified 48-LQFP package, but another DAC cannot be assumed to be interchangeable. Pin compatibility requires identical power, ground, clock, serial-data, control, and six analog-output assignments. The Texas Instruments manufacturer datasheet must be compared line by line with the candidate device, including logic levels and analog output scaling.
What can replace PCM1600YG4 as a drop-in part?
No verified drop-in replacement for the PCM1600YG4 is identified in the available cross-reference information. A valid replacement must match the 48-LQFP footprint, all 48 terminal assignments, 24-bit serial interface, six-channel analog outputs, 96kHz operating mode, supply levels, and digital timing. Generic cross-reference tools may identify similar converters, but only a manufacturer pinout and timing comparison can establish true drop-in compatibility.
When should I choose PCM1600YG4 instead of a multi-DAC design?
Choose the PCM1600YG4 when a system needs six simultaneous analog outputs from one serial audio converter and values a 24-bit resolution at up to 96kHz. A design using multiple single-channel DACs may offer different channel isolation or routing flexibility, but it requires more devices, more digital connections, and additional board area. The PCM1600YG4 is preferable when one shared serial interface and a consolidated 48-LQFP implementation simplify the audio architecture.
How should I design the PCM1600YG4 power and grounding layout?
The PCM1600YG4 should use separate analog and digital supply connections with local high-frequency decoupling placed close to the associated supply pins. According to the Texas Instruments manufacturer datasheet, the converter requires analog and digital supply sources; route noisy digital return currents away from the analog output reference. Keep the six analog traces short, controlled-impedance where appropriate, and isolated from clocks, switching supplies, and digital data paths.
What are the thermal considerations for PCM1600YG4?
The PCM1600YG4 is a surface-mount audio converter in a 48-LQFP package, and its junction temperature must remain within the limits stated in the Texas Instruments manufacturer datasheet. Unlike a linear power regulator, it does not directly dissipate a large regulated-output voltage drop. Thermal design should nevertheless account for internal converter loss, nearby regulator heat, copper area, enclosure temperature, and the commercial 0°C to 70°C ambient specification.
Where can I buy PCM1600YG4 and what is its current lead time?
Use the Request a Quote form on this page to request PCM1600YG4 availability, current lead time, and order quantity from XAIPART. The device is identified in current product listings as a Texas Instruments 48-LQFP audio DAC, but inventory and delivery timing can change by lot and order configuration. The listed tube packaging and commercial temperature grade should be confirmed when the quotation is prepared.
What is the price of PCM1600YG4?
The current PCM1600YG4 quotation is available through the Request a Quote form on this page. The part is a Texas Instruments 24-bit, 6-channel, 96kHz audio DAC supplied in a 48-LQFP package. When requesting a quotation, specify the required quantity, tube packaging, destination, and target delivery date so current commercial terms and logistics can be confirmed for the exact MPN.
Is PCM1600YG4 in stock and what is the minimum order quantity?
Current stock and the minimum order quantity for PCM1600YG4 should be confirmed through the Request a Quote form on this page. The device is supplied in a tube, and commercial lead time can vary with lot availability and requested quantity. Provide the annual usage, order cadence, and delivery location when requesting a quotation so the current allocation can be evaluated against the production plan.
Is PCM1600YG4 compliant with RoHS and REACH?
The current RoHS and REACH status for PCM1600YG4 should be confirmed from the Texas Instruments manufacturer documentation or the applicable compliance statement for the ordered lot. The PCM1600YG4 is a commercial-grade 24-bit, 6-channel audio DAC in a 48-LQFP package, but its material-compliance declarations should not be inferred solely from the package or product family. Request the current compliance record before treating the device as certified for a regulated deployment.

Datos de referencia de ingeniería para PCM1600YG4 — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose the PCM1600YG4 when the design requires six analog audio outputs from one converter, 24-bit resolution, and operation up to a 96kHz sampling rate. Its serial interface is particularly useful when the source is an audio processor, DSP, or other digital subsystem that can share clocking and channel data. The 48-LQFP package provides a conventional surface-mount implementation but requires careful analog and digital layout partitioning. No verified drop-in alternatives are identified, so a redesign should compare converter functions, pinouts, supply requirements, interface timing, output architecture, and environmental specifications directly against the original design. Similar functions or shared package dimensions alone do not establish replacement suitability. For new six-channel products, verify the PCM1600YG4 clocking, output loading, mute behavior, and channel mapping against the system requirements before committing the PCB layout.

Notas de diseño

Separate the six analog output paths from digital clock, serial-data, and switching-supply routing. Place analog and digital decoupling capacitors near their respective supply pins, keep the analog ground return focused beneath the converter, and route the analog outputs toward their next-stage inputs without crossing high-current return paths. The manufacturer's pin-description table and recommended application circuit should determine the exact connection and grounding arrangement.

Do not select a replacement solely because it also has six channels and a 48-lead package. A true drop-in part must match all 48 terminal assignments, analog and digital supply levels, serial-data timing, clock requirements, output scaling, and control logic. Compare the candidate manufacturer datasheets line by line and verify the PCB footprint before treating any cross-reference result as a drop-in replacement.

Use the analog and digital supply inputs as separate power domains and follow the manufacturer datasheet's recommended capacitance and connection arrangement. Check power-up sequencing, reset behavior, master-clock availability, and the voltage tolerances of every attached processor. Supply noise on either domain can affect the six outputs even when the digital interface is operating correctly.

Treat master-clock, serial-data, and serial-clock lines as a coordinated digital interface rather than ordinary low-speed control signals. Match the source and receiver characteristics, use controlled topology where required, avoid long stubs, and maintain continuous reference planes. Confirm supported data formats and timing directly from the Texas Instruments manufacturer datasheet before selecting the digital audio processor.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The commercial temperature grade and 48-LQFP package are confirmed; current material-compliance declarations are not included in the available product documentation.

Datos verificados el: 2026-11-15 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

PCM1600YG4 datasheet PCM1600YG4 datasheet pdf PCM1600YG4 pinout PCM1600YG4 equivalent PCM1600YG4 replacement PCM1600YG4 cross reference PCM1600YG4 footprint PCM1600YG4 price PCM1600YG4 stock Texas Instruments PCM1600YG4 PCM1600YG4 24-bit 6-channel DAC PCM1600YG4 48-LQFP pinout

Componentes & términos relacionados

Texas Instruments PCM1600YG4 PCM1600 24-bit DAC 6-channel DAC digital-to-analog converter data-converter IC audio converter signal-processing IC semiconductor enhanced multilevel delta-sigma serial audio interface 96kHz sampling rate 48-LQFP LQFP package family gull-wing lead surface-mount package analog supply digital supply analog output home-theater audio soundbar active speaker professional audio interface
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ