PCM1600YG4 - 24-Bit 6-Channel 96kHz DAC | Texas Instruments
料号: PCM1600YG4 ✓ 量产中PCM1600YG4 概述
A DAC is an audio data-conversion IC that accepts digital PCM samples and produces corresponding analog voltage signals. Within the broader semiconductor hierarchy, the PCM1600YG4 is an audio DAC, a data-converter IC, and a signal-processing device used between digital audio sources and downstream analog amplification or line-output circuitry.
The six-channel architecture reduces the number of separate converters required for surround-sound, home-theater, or multi-zone audio designs. Its 24-bit data resolution supports detailed digital audio representation, while operation up to a 96kHz sampling rate accommodates high-resolution audio streams. The serial interface reduces the number of data connections required between the DAC and a digital audio controller.
The PCM1600YG4 is identified as an enhanced multilevel delta-sigma digital-to-analog converter. This architecture is appropriate for audio-frequency signal generation because it provides a digital conversion path designed for high-resolution multichannel playback. The device accepts both analog and digital supply sources, allowing the system designer to manage noisy digital and sensitive analog supply domains separately.
Typical uses include home-theater audio, multichannel receivers, digital active speakers, AV receivers, soundbars, and professional audio equipment requiring six simultaneous analog outputs. The 48-LQFP package also provides adequate pin count for dedicated analog outputs, digital control signals, and power-related connections in a conventional PCB design.
Layout is critical because analog output stages can be affected by switching noise and ground-current coupling. Place analog and digital supply decoupling according to the manufacturer datasheet, route the six analog output channels away from high-current digital paths, and use a quiet ground strategy for the analog section. Confirm output-buffer loading, digital-interface levels, and supported operating modes before finalizing the schematic.
This product page combines the verified device identity and package details with practical integration guidance for multichannel audio systems. It also identifies replacement constraints clearly, explains where the manufacturer documentation should be consulted, and organizes the PCM1600YG4 specifications for rapid engineering review and sourcing.
直接替换替代料: PCM1600YG4 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
该产品暂无直接替换替代料。
请求替代料PCM1600YG4 最大额定值与电气特性
| Converter Type | 24-bit, 6-channel audio digital-to-analog converter |
| Architecture | Enhanced multilevel delta-sigma DAC |
| 分辨率 | 24 bit |
| Number of Channels | 6 channels |
| Maximum Sampling Rate | 96 kHz |
| Data Interface | Serial |
| Supply Sources | Analog and digital |
| 工作温度范围 | 0°C to 70°C |
| Temperature Grade | Commercial |
| 封装 | 48-LQFP |
| Package Code | LFQFP |
| Package Shape | Square |
| Terminal Form | Gull wing |
| Number of Terminals | 48 |
| Packaging | Tube |
| 安装类型 | Surface mount |
PCM1600YG4 square 引脚配置指南
PCM1600YG4(square 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。
暂无详细引脚数据: PCM1600YG4.
请参阅 数据手册 以查看完整引脚配置。
典型应用
PCM1600YG4 适用于 6 应用s: Home-Theater Audio Receiver, Multichannel Soundbar, Digital Active Speaker, Professional Audio Interface, Automotive Infotainment Audio, Industrial Audio Control System.
Home-Theater Audio Receiver
The PCM1600YG4 fits a home-theater receiver because it provides six analog output channels from one 24-bit converter with operation up to a 96kHz sampling rate. It can receive multichannel audio from an I2S-compatible processor and generate the front-left, front-right, center, surround-left, surround-right, and rear or subwoofer-related signals used by the receiver architecture. The serial interface reduces the number of connections between the digital audio engine and the analog output stage. Designers should confirm output scaling, mute behavior, clocking, and the required bass-management routing in the system controller. The manufacturer datasheet remains the controlling reference for pin assignment, supply sequencing, analog output loading, and supported data formats.
推荐
Multichannel Soundbar
A soundbar can use the PCM1600YG4 to create six amplified audio channels from a compact digital audio subsystem. Its 24-bit resolution preserves high-resolution source data, while the 96kHz sampling-rate capability supports professionally mastered high-resolution material. The device is placed after the soundbar's digital audio processor and before the line-level amplifier inputs. The main design constraints are analog-output loading, clock jitter, output scaling, and separation of the converter's analog and digital supply domains. Confirm the supported serial interface, master-clock requirements, mute timing, and channel mapping against the Texas Instruments manufacturer datasheet before PCB release.
推荐
Digital Active Speaker
The PCM1600YG4 is suitable for a digital active speaker that accepts digital audio over a serial link and produces analog line signals for power amplifiers. Six outputs permit separate conversion for multiple drivers or zones without requiring six discrete converter packages. Its 24-bit data path and 96kHz maximum sampling rate align with high-resolution playback systems, while the 48-LQFP package simplifies routing around a conventional audio processor. The system designer must verify master-clock generation, data alignment, analog output full-scale behavior, and amplifier input impedance. Short analog traces and a carefully partitioned ground plane are important for preserving low-level audio fidelity.
推荐
Professional Audio Interface
A professional multi-channel audio interface can employ the PCM1600YG4 for analog monitoring outputs when the design requires 24-bit conversion at rates up to 96kHz. The converter accepts serial digital audio from a DSP or field-programmable logic array and provides six analog channels for mixing, monitoring, or line-level routing. The Texas Instruments manufacturer datasheet should establish the exact interface mode, clocking scheme, supported sampling rates, and output architecture. Engineers should also evaluate output drive against the next analog stage, use separate supply filtering, and verify that the commercial 0°C to 70°C range meets the intended equipment environment.
推荐
Automotive Infotainment Audio
The PCM1600YG4 can serve as the digital-to-analog conversion element in an automotive infotainment head unit when its electrical and environmental requirements are acceptable for the installation. Six analog channels support zone-based cabin audio, navigation prompts, and conventional entertainment paths, while 24-bit data at up to 96kHz accommodates high-resolution audio streams. Because the specified device is commercial grade with a 0°C to 70°C operating range, the final vehicle platform must verify temperature, vibration, transient, and supplier-qualification requirements. Use the manufacturer datasheet for supply tolerances, clocking, reset behavior, and channel routing rather than relying on general audio-converter assumptions.
推荐
Industrial Audio Control System
The PCM1600YG4 can provide multiple synchronized analog outputs in an industrial audio-control system that distributes machine-status tones, voice prompts, or multichannel monitoring audio. Its six-channel architecture reduces converter count, and the serial interface allows a central controller to supply channel-consistent digital samples. The converter must operate within its commercial 0°C to 70°C specification, which may require enclosure temperature control in industrial equipment. The design should use the manufacturer datasheet to establish supported clock modes, data synchronization, output muting, and power requirements. Printed-circuit layout should isolate analog outputs from relay, motor, and switching-supply return currents.
推荐
工程参考数据: PCM1600YG4 ——对比、设计指导和合规信息。
选型指南
设计说明
Separate the six analog output paths from digital clock, serial-data, and switching-supply routing. Place analog and digital decoupling capacitors near their respective supply pins, keep the analog ground return focused beneath the converter, and route the analog outputs toward their next-stage inputs without crossing high-current return paths. The manufacturer's pin-description table and recommended application circuit should determine the exact connection and grounding arrangement.
Do not select a replacement solely because it also has six channels and a 48-lead package. A true drop-in part must match all 48 terminal assignments, analog and digital supply levels, serial-data timing, clock requirements, output scaling, and control logic. Compare the candidate manufacturer datasheets line by line and verify the PCB footprint before treating any cross-reference result as a drop-in replacement.
Use the analog and digital supply inputs as separate power domains and follow the manufacturer datasheet's recommended capacitance and connection arrangement. Check power-up sequencing, reset behavior, master-clock availability, and the voltage tolerances of every attached processor. Supply noise on either domain can affect the six outputs even when the digital interface is operating correctly.
Treat master-clock, serial-data, and serial-clock lines as a coordinated digital interface rather than ordinary low-speed control signals. Match the source and receiver characteristics, use controlled topology where required, avoid long stubs, and maintain continuous reference planes. Confirm supported data formats and timing directly from the Texas Instruments manufacturer datasheet before selecting the digital audio processor.
合规信息
The commercial temperature grade and 48-LQFP package are confirmed; current material-compliance declarations are not included in the available product documentation.