PCM1710U/1K - 20-Bit Stereo Audio DAC | Texas Instruments
N.º de pieza: PCM1710U/1K ✓ ActivoPCM1710U/1K Descripción general
An audio DAC is a semiconductor in the digital-to-analog converter and data-conversion hierarchy. It receives digital audio samples, reconstructs their analog voltage waveform, and supplies a continuously variable analog signal for downstream audio amplification. The PCM1710U/1K combines a stereo converter architecture with a serial digital interface, making it suitable for systems that convert CD, DVD, broadcast, or computer audio into balanced or unbalanced analog outputs.
The principal identified specifications are 20-bit resolution, 48 kHz operation, dual analog output, and a 28-SOIC package. The converter description identifies it as a dual 16/20-bit audio DAC with dual voltage outputs. Its serial interface allows a digital audio source to feed the converter without requiring a parallel data bus, reducing wiring complexity in compact consumer and professional audio equipment.
The PCM1710U/1K is intended for stereo audio signal paths where two analog channels are required from one converter package. Its 48 kHz rate aligns with the conventional 44.1 kHz CD-audio domain and other base-rate digital audio systems. The 20-bit advertised resolution describes the converter's digital data capability, while the 16/20-bit designation reflects the converter family terminology used in the product description.
Typical uses include CD-player analog stages, multichannel audio receivers, digital mixing equipment, active speakers, and general-purpose stereo audio acquisition systems. In these applications, the converter is placed between a digital audio source and an analog voltage amplifier or line-input stage. The analog outputs must be interpreted according to the manufacturer's application circuit, including the required decoupling and output integration network.
When laying out the PCB, treat the SOIC power and ground connections as high-current paths and keep analog output routing away from digital clock and serial-data traces. Verify the required output filters, mute behavior, and analog supply arrangement against the manufacturer datasheet before releasing the layout. This page also consolidates the exact ordering code, package information, commercial data, and drop-in replacement assessment for engineering review.
Alternativas directas para PCM1710U/1K — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
No hay alternativas directas disponibles para este producto.
Solicitar alternativasPCM1710U/1K Valores máximos y características eléctricas
| Product Type | Stereo audio digital-to-analog converter |
| Manufacturer | Texas Instruments |
| Converter Resolution | 16/20 bit |
| Advertised DAC Resolution | 20 bit |
| Maximum Sample Rate | 48 kHz |
| Channel Configuration | Dual-channel stereo |
| Output Architecture | Dual voltage output |
| Digital Interface | Serial audio interface |
| Encapsulado | 28-SOIC |
| Package Body Width | 7.50 mm |
| Package Body Width | 0.295 inch |
| Terminal Count | 28 terminals |
| Tipo de montaje | Surface mount |
Guía de configuración de pines de PCM1710U/1K 0.295 inch
Configuración de pines para PCM1710U/1K (encapsulado 0.295 inch). Este componente analógico presenta pines de entrada, salida y alimentación. Consulte la hoja de datos del fabricante para conocer las configuraciones de los pines de ajuste de offset, compensación y habilitación. Ideal para circuitos de acondicionamiento de señal y amplificadores.
No hay datos detallados de patillaje disponibles para PCM1710U/1K.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
PCM1710U/1K es adecuado para 6 aplicacións: CD Player Analog Output, Stereo Audio Receiver, Digital Audio Mixer, Active Speaker Amplifier, Stereo Audio Acquisition, Professional Audio Equipment.
CD Player Analog Output
The PCM1710U/1K fits a conventional CD-player output path because it is identified as a dual 16/20-bit audio DAC with a maximum 48 kHz sample rate and serial audio interface. Position the converter after the CD decoder's digital output and before the stereo line amplifier, using its left and right voltage outputs as the final digital-to-analog conversion stage. The 28-SOIC package supports conventional surface-mount assembly, while the dual-output organization avoids using separate converter packages for each channel. Confirm master-clock and serial-data timing, define the reconstruction and anti-imaging network from the manufacturer application circuit, and verify supply and mute sequencing before releasing the PCB.
Recomendado
Stereo Audio Receiver
The PCM1710U/1K is appropriate for a receiver's local stereo analog-output stage when the internal audio engine delivers serial PCM data at no more than 48 kHz. Its dual 16/20-bit conversion and dual voltage outputs support left and right channels in one 28-SOIC device, while the serial interface avoids a wide parallel data path across the board. Place the DAC close to the output amplifier and analog routing network to minimize sensitive-output trace length. The design must follow the manufacturer's clock, supply, filtering, and grounding guidance and should verify behavior during mute, format changes, and power sequencing.
Recomendado
Digital Audio Mixer
PCM1710U/1K can serve as the final stereo conversion stage in a digital mixer or digital signal-processing product that produces two analog channels at a 48 kHz-class rate. The serial digital interface is suitable for receiving decoded mixer output, and the dual voltage outputs simplify the connection to a balanced or unbalanced output driver. A practical design should isolate digital control and clock traces from the analog outputs, place decoupling at the package pins, and implement the output filter recommended by Texas Instruments. Verify sample-rate synchronization, mute timing, and output stability across channel-level changes before production release.
Recomendado
Active Speaker Amplifier
The PCM1710U/1K is suitable for a digital active-speaker module that receives stereo audio over a serial link and requires local analog signals for power amplification. Its 20-bit advertised resolution and 48 kHz maximum sample rate fit conventional compact-audio sources, while dual voltage outputs feed left and right driver channels from one 28-SOIC package. Place the converter and output-reconstruction network near the amplifier inputs to reduce analog trace exposure. Review the manufacturer's recommended filter, supply arrangement, and grounding topology, and confirm that the converter's output level and impedance match the amplifier's input requirements.
Recomendado
Stereo Audio Acquisition
PCM1710U/1K can be used in a stereo acquisition product when an upstream DSP or interface supplies serial audio data and the system requires simultaneous left and right analog outputs. The converter's dual 16/20-bit architecture, 48 kHz rate, and serial interface fit a 28-SOIC-based signal path. The analog section should include the manufacturer-recommended reconstruction or smoothing network and be separated from digital switching nodes. Validate input timing, supported audio format, output reference behavior, and system noise performance on the assembled board before using the converter for measurement or monitoring channels.
Recomendado
Professional Audio Equipment
The PCM1710U/1K can provide the stereo conversion stage in professional monitoring, rack, or digital audio equipment operating at 48 kHz. The device combines a serial interface with dual voltage outputs in a 28-SOIC package, enabling a conventional surface-mount layout without separate left- and right-channel DAC packages. Designers should route analog outputs away from processor clocks and switching regulators, retain short supply loops, and use a grounded analog output reference. Before production, confirm signal level, reconstruction filtering, clock synchronization, mute behavior, and channel-to-channel performance against the manufacturer datasheet and the intended system gain structure.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para PCM1710U/1K — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto |
|---|---|
| Brand | Texas Instruments |
| Package | 28-SOIC, 0.295 inch (7.50 mm) body width |
| Product Type | Stereo audio digital-to-analog converter |
| Converter Resolution | 16/20 bit |
| Maximum Sample Rate | 48 kHz |
| Channel Configuration | Dual-channel stereo |
| Output Architecture | Dual voltage output |
| Digital Interface | Serial |
| Terminal Count | 28 terminals |
| Mounting Type | Surface mount |
Diferenciadores clave
- Integrated stereo conversion in one package (frente a Discrete left- and right-channel converter implementations)
- Serial digital audio interface (frente a Parallel digital-to-analog converter designs)
- Defined dual output architecture (frente a Single-channel audio DAC implementations)
Notas de diseño
Place the required input, output, and supply capacitors directly beside their associated pins, following the Texas Instruments PCM1710 application circuit for values and topology. Keep the 28-SOIC footprint within the manufacturer's recommended solder and land-pattern geometry. Route the serial data and clock connections away from the two analog outputs to reduce capacitive coupling into the audio path.
Separate analog output routing from switching-regulator, processor-clock, and digital-control traces. Maintain a continuous ground reference under and around the converter where PCB rules permit, and return analog-output currents directly to the device ground through a low-impedance path. Confirm the analog output reference and mute architecture in the manufacturer schematic before assigning the ground pins and output-network connections.
Treat the serial audio interface and clock signals as timing-sensitive connections. Match trace topology across the source and PCM1710U/1K, keep the clock away from analog outputs, and avoid adding test-point stubs that degrade signal integrity. Use the manufacturer's timing diagrams to establish setup and hold requirements, and verify the supported master-clock and audio-data format for the selected system operating mode.
Do not treat PCM1710U, PCM1710U/1K, and similar PCM-family converters as automatically interchangeable. The package and function may appear similar while ordering suffixes, pin functions, or analog networks differ. Confirm the exact ordering code, pin-description table, supply limits, output filter, clock requirements, and device marking before substituting any catalog entry or redesigning an existing board.
Información de cumplimiento
No part-specific environmental or regulatory declarations were identified in the product information. Compliance status must be confirmed from the manufacturer documentation for the exact ordering code.