PCM1710U/1K - 20-Bit Stereo Audio DAC | Texas Instruments
料号: PCM1710U/1K ✓ 量产中PCM1710U/1K 概述
An audio DAC is a semiconductor in the digital-to-analog converter and data-conversion hierarchy. It receives digital audio samples, reconstructs their analog voltage waveform, and supplies a continuously variable analog signal for downstream audio amplification. The PCM1710U/1K combines a stereo converter architecture with a serial digital interface, making it suitable for systems that convert CD, DVD, broadcast, or computer audio into balanced or unbalanced analog outputs.
The principal identified specifications are 20-bit resolution, 48 kHz operation, dual analog output, and a 28-SOIC package. The converter description identifies it as a dual 16/20-bit audio DAC with dual voltage outputs. Its serial interface allows a digital audio source to feed the converter without requiring a parallel data bus, reducing wiring complexity in compact consumer and professional audio equipment.
The PCM1710U/1K is intended for stereo audio signal paths where two analog channels are required from one converter package. Its 48 kHz rate aligns with the conventional 44.1 kHz CD-audio domain and other base-rate digital audio systems. The 20-bit advertised resolution describes the converter's digital data capability, while the 16/20-bit designation reflects the converter family terminology used in the product description.
Typical uses include CD-player analog stages, multichannel audio receivers, digital mixing equipment, active speakers, and general-purpose stereo audio acquisition systems. In these applications, the converter is placed between a digital audio source and an analog voltage amplifier or line-input stage. The analog outputs must be interpreted according to the manufacturer's application circuit, including the required decoupling and output integration network.
When laying out the PCB, treat the SOIC power and ground connections as high-current paths and keep analog output routing away from digital clock and serial-data traces. Verify the required output filters, mute behavior, and analog supply arrangement against the manufacturer datasheet before releasing the layout. This page also consolidates the exact ordering code, package information, commercial data, and drop-in replacement assessment for engineering review.
直接替换替代料: PCM1710U/1K ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
该产品暂无直接替换替代料。
请求替代料PCM1710U/1K 最大额定值与电气特性
| Product Type | Stereo audio digital-to-analog converter |
| Manufacturer | Texas Instruments |
| Converter Resolution | 16/20 bit |
| Advertised DAC Resolution | 20 bit |
| Maximum Sample Rate | 48 kHz |
| Channel Configuration | Dual-channel stereo |
| Output Architecture | Dual voltage output |
| Digital Interface | Serial audio interface |
| 封装 | 28-SOIC |
| Package Body Width | 7.50 mm |
| Package Body Width | 0.295 inch |
| Terminal Count | 28 terminals |
| 安装类型 | Surface mount |
PCM1710U/1K 0.295 inch 引脚配置指南
PCM1710U/1K(0.295 inch 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。
暂无详细引脚数据: PCM1710U/1K.
请参阅 数据手册 以查看完整引脚配置。
典型应用
PCM1710U/1K 适用于 6 应用s: CD Player Analog Output, Stereo Audio Receiver, Digital Audio Mixer, Active Speaker Amplifier, Stereo Audio Acquisition, Professional Audio Equipment.
CD Player Analog Output
The PCM1710U/1K fits a conventional CD-player output path because it is identified as a dual 16/20-bit audio DAC with a maximum 48 kHz sample rate and serial audio interface. Position the converter after the CD decoder's digital output and before the stereo line amplifier, using its left and right voltage outputs as the final digital-to-analog conversion stage. The 28-SOIC package supports conventional surface-mount assembly, while the dual-output organization avoids using separate converter packages for each channel. Confirm master-clock and serial-data timing, define the reconstruction and anti-imaging network from the manufacturer application circuit, and verify supply and mute sequencing before releasing the PCB.
推荐
Stereo Audio Receiver
The PCM1710U/1K is appropriate for a receiver's local stereo analog-output stage when the internal audio engine delivers serial PCM data at no more than 48 kHz. Its dual 16/20-bit conversion and dual voltage outputs support left and right channels in one 28-SOIC device, while the serial interface avoids a wide parallel data path across the board. Place the DAC close to the output amplifier and analog routing network to minimize sensitive-output trace length. The design must follow the manufacturer's clock, supply, filtering, and grounding guidance and should verify behavior during mute, format changes, and power sequencing.
推荐
Digital Audio Mixer
PCM1710U/1K can serve as the final stereo conversion stage in a digital mixer or digital signal-processing product that produces two analog channels at a 48 kHz-class rate. The serial digital interface is suitable for receiving decoded mixer output, and the dual voltage outputs simplify the connection to a balanced or unbalanced output driver. A practical design should isolate digital control and clock traces from the analog outputs, place decoupling at the package pins, and implement the output filter recommended by Texas Instruments. Verify sample-rate synchronization, mute timing, and output stability across channel-level changes before production release.
推荐
Active Speaker Amplifier
The PCM1710U/1K is suitable for a digital active-speaker module that receives stereo audio over a serial link and requires local analog signals for power amplification. Its 20-bit advertised resolution and 48 kHz maximum sample rate fit conventional compact-audio sources, while dual voltage outputs feed left and right driver channels from one 28-SOIC package. Place the converter and output-reconstruction network near the amplifier inputs to reduce analog trace exposure. Review the manufacturer's recommended filter, supply arrangement, and grounding topology, and confirm that the converter's output level and impedance match the amplifier's input requirements.
推荐
Stereo Audio Acquisition
PCM1710U/1K can be used in a stereo acquisition product when an upstream DSP or interface supplies serial audio data and the system requires simultaneous left and right analog outputs. The converter's dual 16/20-bit architecture, 48 kHz rate, and serial interface fit a 28-SOIC-based signal path. The analog section should include the manufacturer-recommended reconstruction or smoothing network and be separated from digital switching nodes. Validate input timing, supported audio format, output reference behavior, and system noise performance on the assembled board before using the converter for measurement or monitoring channels.
推荐
Professional Audio Equipment
The PCM1710U/1K can provide the stereo conversion stage in professional monitoring, rack, or digital audio equipment operating at 48 kHz. The device combines a serial interface with dual voltage outputs in a 28-SOIC package, enabling a conventional surface-mount layout without separate left- and right-channel DAC packages. Designers should route analog outputs away from processor clocks and switching regulators, retain short supply loops, and use a grounded analog output reference. Before production, confirm signal level, reconstruction filtering, clock synchronization, mute behavior, and channel-to-channel performance against the manufacturer datasheet and the intended system gain structure.
推荐
推荐产品汇总
工程参考数据: PCM1710U/1K ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 |
|---|---|
| Brand | Texas Instruments |
| Package | 28-SOIC, 0.295 inch (7.50 mm) body width |
| Product Type | Stereo audio digital-to-analog converter |
| Converter Resolution | 16/20 bit |
| Maximum Sample Rate | 48 kHz |
| Channel Configuration | Dual-channel stereo |
| Output Architecture | Dual voltage output |
| Digital Interface | Serial |
| Terminal Count | 28 terminals |
| Mounting Type | Surface mount |
关键差异点
- Integrated stereo conversion in one package (对比 Discrete left- and right-channel converter implementations)
- Serial digital audio interface (对比 Parallel digital-to-analog converter designs)
- Defined dual output architecture (对比 Single-channel audio DAC implementations)
设计说明
Place the required input, output, and supply capacitors directly beside their associated pins, following the Texas Instruments PCM1710 application circuit for values and topology. Keep the 28-SOIC footprint within the manufacturer's recommended solder and land-pattern geometry. Route the serial data and clock connections away from the two analog outputs to reduce capacitive coupling into the audio path.
Separate analog output routing from switching-regulator, processor-clock, and digital-control traces. Maintain a continuous ground reference under and around the converter where PCB rules permit, and return analog-output currents directly to the device ground through a low-impedance path. Confirm the analog output reference and mute architecture in the manufacturer schematic before assigning the ground pins and output-network connections.
Treat the serial audio interface and clock signals as timing-sensitive connections. Match trace topology across the source and PCM1710U/1K, keep the clock away from analog outputs, and avoid adding test-point stubs that degrade signal integrity. Use the manufacturer's timing diagrams to establish setup and hold requirements, and verify the supported master-clock and audio-data format for the selected system operating mode.
Do not treat PCM1710U, PCM1710U/1K, and similar PCM-family converters as automatically interchangeable. The package and function may appear similar while ordering suffixes, pin functions, or analog networks differ. Confirm the exact ordering code, pin-description table, supply limits, output filter, clock requirements, and device marking before substituting any catalog entry or redesigning an existing board.
合规信息
No part-specific environmental or regulatory declarations were identified in the product information. Compliance status must be confirmed from the manufacturer documentation for the exact ordering code.