Texas Instruments

PCM1755DBQR - 24-Bit Stereo Audio DAC | Texas Instruments

N.º de pieza: PCM1755DBQR ✓ Activo
5 V for stated analog-performance conditions Vdss 16-pin SSOP (DBQ), 0.154 in × 3.90 mm Package
MOQ: 1 |

PCM1755DBQR Descripción general

The Texas Instruments PCM1755DBQR is a 24-bit stereo audio digital-to-analog converter with 106 dB dynamic range, 106 dB typical SNR, and 0.002% typical THD+N at a 5 V supply. It accepts I2S audio data, supports sampling rates up to 200 kHz in the listed ordering information, and is housed in a 16-pin SSOP package.

An audio DAC converts digital PCM audio streams into left and right analog voltage signals suitable for headphone, line-level, or power-amplifier inputs. The PCM1755 belongs to the delta-sigma DAC hierarchy, combining a multi-level quantization architecture, fourth-order noise shaping, digital oversampling, and an analog output stage. These functions place it between digital audio processors and downstream analog audio amplification.

Key performance features include 24-bit data resolution, 106 dB dynamic range, 106 dB typical signal-to-noise ratio, and 0.002% typical total harmonic distortion plus noise. The converter supports 4× or 8× oversampling and provides 50 dB stop-band attenuation. A typical full-scale analog output of 4 VPP provides useful headroom for balanced or single-ended audio circuitry.

The PCM1755 uses TI's enhanced multilevel delta-sigma architecture with eight-level amplitude quantization and fourth-order noise shaping. This architecture is intended to improve clock-jitter tolerance while retaining high-resolution performance. Configuration is available through hardware control or a three-wire serial control port that supports register writes, allowing the host processor to select operating modes and implement programmable functions.

Typical applications include high-resolution audio players, network audio equipment, home-theater audio systems, digital mixing consoles, active speakers, and professional audio interfaces. Its 106 dB SNR supports low-noise reconstruction, while the 24-bit interface accommodates modern digital audio pipelines. The I2S-compatible interface also simplifies connection to audio DSPs and digital audio engines.

Layout should prioritize short, symmetric analog output paths and clean return currents between the DAC, output filtering network, and following amplifier. Power and ground planes should be decoupled close to the device, and analog signal routing should avoid digital clock and serial-control traces. The analog output architecture and supported single-ended interface determine the external filtering and gain-stage requirements.

This page combines the manufacturer's device specifications, package and ordering details, drop-in replacement evidence, comparison parameters, and practical PCB guidance. It is intended to help engineers evaluate the PCM1755DBQR for audio DAC boards, digital audio platforms, and retrofit projects where 24-bit conversion, 106 dB SNR, and a 16-pin SSOP footprint are central design requirements.

Alternativas directas para PCM1755DBQR — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

PCM1754DBQG4

✅ Sustitución directa
📦 16-pin SSOP (DBQ)
Same 24-bit resolution and 16-pin SSOP format; control-register and filter behavior should be checked before substitution

📋 Alternativa de referencia (no en el catálogo)

PCM1755DBQ

✅ Sustitución directa
Texas Instruments
📦 16-pin SSOP (DBQ)
Stereo audio digital-to-analog converter (DAC) · 24 bit · 2 channels · 200 kHz · I2S · 106 dB typical at 5 V · 106 dB at 5 V · 0.002% typical at 5 V

Consulte el precio

Ver hoja de datos →

PCM1755DBQG4

✅ Sustitución directa
📦 16-pin SSOP (DBQ)
Identical PCM1755 device and electrical function; green-compatible ordering suffix differs from DBQR

📋 Alternativa de referencia (no en el catálogo)

PCM1755DBQR Valores máximos y características eléctricas

Device Type Stereo audio digital-to-analog converter (DAC)
Data Resolution 24 bit
Maximum Listed Sampling Rate 200 kHz
Digital Audio Interface I2S
Dynamic Range at 5 V 106 dB
Signal-to-Noise Ratio at 5 V 106 dB typical
Total Harmonic Distortion Plus Noise at 5 V 0.002% typical
Full-Scale Output at 5 V 4 VPP typical
Digital Filter Oversampling 4× or 8×
Stop-Band Attenuation -50 dB
Control Interface Hardware control or 3-wire serial register-write control
Converter Architecture Enhanced multilevel delta-sigma with 4th-order noise shaping and 8-level amplitude quantization
Tensión de alimentación 5 V for stated analog-performance conditions
Encapsulado 16-pin SSOP (DBQ), 0.154 in × 3.90 mm
Tipo de montaje Surface mount
Packaging Tape and reel
Estado RoHS RoHS3 compliant
Lead-Free Status Lead free

Guía de configuración de pines de PCM1755DBQR 16-pin ssop (dbq), 0.154 in × 3.90 mm

Configuración de pines para PCM1755DBQR (encapsulado 16-pin ssop (dbq), 0.154 in × 3.90 mm). Este componente analógico presenta pines de entrada, salida y alimentación. Consulte la hoja de datos del fabricante para conocer las configuraciones de los pines de ajuste de offset, compensación y habilitación. Ideal para circuitos de acondicionamiento de señal y amplificadores.

Diagrama de patillaje del encapsulado 16-pin ssop (dbq), 0.154 in × 3.90 mm para PCM1755DBQR

No hay datos detallados de patillaje disponibles para PCM1755DBQR.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

PCM1755DBQR es adecuado para 6 aplicacións: High-Resolution Network Audio Player, Professional Audio Interface, Digital Mixing Console Output, Active Speaker USB Audio Interface, Home Theater Stereo Output, Digital Audio Recorder Playback Monitor.

🌐

High-Resolution Network Audio Player

The PCM1755DBQR fits a network audio player that accepts 24-bit digital streams and requires a clean stereo analog stage. Its 106 dB typical SNR and 0.002% typical THD+N at a 5 V supply establish a high-performance conversion baseline, while the I2S interface connects to an audio DSP or network-audio SoC. The device accepts up to the listed 200 kHz sampling rate and offers 4× or 8× oversampling. A practical implementation places the DAC close to the output connector, uses short left and right analog routes, and preserves a quiet ground return to the line-level amplifier. The main trade-off is that a linear analog reconstruction and output-filter network remain necessary to translate the converter’s current or voltage-domain outputs into the exact gain and impedance required by the following stage.

🎧

Professional Audio Interface

The PCM1755DBQR is appropriate for a professional stereo audio interface that reconstructs high-resolution playback channels for monitoring and recording systems. Its 24-bit data path, 106 dB dynamic range, and 106 dB typical SNR provide headroom for the converter stage, while the three-wire serial control port allows a host controller to configure programmable functions. The I2S connection can link to an audio DSP that handles routing, sample-rate conversion, and clock generation. Use short analog traces and independent left and right filtering to minimize channel skew and crosstalk. Because system noise also originates in references, regulators, clock sources, and the analog output amplifier, evaluate the complete signal chain rather than treating the DAC’s SNR as the only system noise limit.

🎚️

Digital Mixing Console Output

The PCM1755DBQR can serve as the final stereo monitoring DAC in a digital mixing console because it combines a 24-bit conversion path with software-controlled operating functions. The 106 dB typical SNR and 0.002% typical THD+N are useful when preserving quiet program material through the console’s output stage. The converter can be driven from an I2S-enabled DSP, with its three-wire serial interface providing configuration and control. Keep the digital bus and clock away from the analog outputs, provide local supply bypassing, and route both channels with matched geometry. Designers should verify the required digital filter mode, de-emphasis behavior, output topology, and master-clock arrangement against the manufacturer datasheet before finalizing the console output board.

🖥️

Active Speaker USB Audio Interface

The PCM1755DBQR is well suited to the stereo playback section of a USB audio interface feeding powered speakers or headphones. Its I2S input accepts digital audio from a USB controller, while the 106 dB dynamic range and 0.002% typical THD+N support quiet reconstruction of high-resolution recordings. The 16-pin SSOP package keeps the converter compact, and the listed maximum sampling rate of 200 kHz accommodates high-rate source formats. A practical board should isolate the DAC’s analog path from USB and clock routing, use a continuous ground plane, and place output-network components close to their associated pins. The downstream amplifier and headphone driver still set the final output noise, output impedance, and channel-balance performance.

📺

Home Theater Stereo Output

The PCM1755DBQR can provide the stereo analog output for a home-theater processor, television, or compact media appliance. The 24-bit interface and 106 dB typical SNR support accurate reconstruction of compressed and lossless source material, while the converter’s 4× or 8× oversampling options provide digital-filter flexibility. Connect the I2S data, clock, and channel-selection signals from the system audio processor, then use a low-noise analog filter before the line-level amplifier. Short output routing and quiet reference connections help preserve the converter’s performance. If the design requires additional surround channels, a multi-channel codec may be more integration-efficient than adding one stereo PCM1755DBQR for each pair of channels.

🎙️

Digital Audio Recorder Playback Monitor

The PCM1755DBQR fits the playback-monitoring DAC in a digital recorder because it delivers 24-bit stereo reconstruction with 106 dB typical SNR and low 0.002% typical THD+N. The I2S interface allows direct connection to the recorder’s digital audio engine, and hardware or three-wire serial control supports integration with different system architectures. For monitoring applications, maintain matched analog paths for the two channels and keep the DAC reference and supply return currents away from noisy digital and power-converter regions. Validate the required output level, filter mode, and clock relationship against the manufacturer application circuit. This device addresses conversion quality, while the monitor amplifier, headphone stage, and mechanical isolation determine much of the final perceived performance.

What is the PCM1755DBQR?
The PCM1755DBQR is a Texas Instruments 24-bit stereo audio digital-to-analog converter with 106 dB dynamic range, 106 dB typical SNR, and 0.002% typical THD+N at a 5 V supply. It converts I2S digital audio into left and right analog outputs and is packaged in a 16-pin SSOP. According to the manufacturer datasheet, its enhanced multilevel delta-sigma architecture uses fourth-order noise shaping and eight-level amplitude quantization.
Where can I download the PCM1755DBQR datasheet PDF?
The official PCM1755 datasheet is available from Texas Instruments through the manufacturer link on this page. It documents the 24-bit conversion architecture, 106 dB dynamic range, 106 dB typical SNR, 0.002% typical THD+N, 4× or 8× digital oversampling, control modes, electrical characteristics, and application information. Use the manufacturer's pin-description table when assigning PCB tracks and signal names.
Where can I find the PCM1755DBQR pinout?
The PCM1755DBQR uses a 16-pin SSOP package, and its complete numbered pin assignment is shown in the PCM1755 manufacturer datasheet. The package is identified by the DBQ suffix, while DBQR identifies the tape-and-reel ordering option. Use the pin-description table and land-pattern dimensions in the datasheet rather than inferring pin functions from another PCM175x member.
What is the SNR and THD+N of PCM1755DBQR?
At a 5 V supply, the PCM1755DBQR provides 106 dB dynamic range, 106 dB typical signal-to-noise ratio, and 0.002% typical THD+N. According to the manufacturer datasheet, these figures characterize the converter's analog performance and make it suitable for high-resolution consumer and professional audio reconstruction. Actual system performance also depends on clock quality, filtering, grounding, and the analog output stage.
What audio interface does PCM1755DBQR use?
The PCM1755DBQR accepts I2S digital audio data and provides stereo analog outputs. Its 24-bit conversion path operates at the listed maximum sampling rate of 200 kHz, while the digital filter supports 4× or 8× oversampling and provides 50 dB stop-band attenuation. The device can use hardware control or a three-wire serial port supporting register writes.
What can replace the PCM1755DBQR?
The PCM1754DBQG4 is identified by the cross-reference information as a complete replacement using the same 24-bit, 16-pin SSOP format and consistent terminals and packages. The PCM1755DBQR remains preferable when its software-control register set or specific PCM1755 behavior is required. Confirm the complete electrical, clock, filter, and control configuration against the manufacturer datasheets before production use.
Is the PCM1755DBQR the same as the PCM1755DBQ?
The PCM1755DBQ and PCM1755DBQR identify the same Texas Instruments PCM1755 device in the same 16-pin SSOP family, with DBQR denoting the tape-and-reel ordering format. The suffix does not indicate a different converter architecture or a different core datasheet. Use the orderable part number appropriate to the assembly and packaging method.
PCM1755DBQR vs PCM1754DBQ - which is better for an audio DAC board?
The PCM1755DBQR is the stronger choice when programmable software control and its complete register-based feature set are required. The PCM1754DBQG4 is reported as a complete drop-in replacement with consistent terminals and the same 16-pin SSOP package, making it useful when the existing board does not depend on PCM1755-specific control behavior. Verify filtering, output mode, and control-register differences before substitution.
When should I choose PCM1755DBQR over PCM1754DBQG4?
Choose PCM1755DBQR when the design depends on its three-wire serial register-write control, hardware/software operating modes, or other PCM1755-specific behavior. Choose PCM1754DBQG4 when it provides the required audio performance and the board can operate with the PCM1754 control and filter configuration. The shared 16-pin SSOP package simplifies mechanical reuse, but functional equivalence must be checked independently.
Is PCM1755DBQR suitable for high-resolution audio equipment?
The PCM1755DBQR is suitable for high-resolution stereo audio equipment because it provides 24-bit conversion, 106 dB dynamic range, 106 dB typical SNR, and 0.002% typical THD+N. Its I2S interface connects cleanly to digital audio processors, while the internal oversampling filter supports 4× or 8× operation. System-level fidelity still depends on the source clock, analog reconstruction network, power design, and output amplifier.
What is the best Texas Instruments equivalent for PCM1755DBQR?
The PCM1754DBQG4 is the closest documented Texas Instruments equivalent because the cross-reference information describes it as a complete replacement with consistent terminals, packages, and primary performance characteristics. It uses the same 24-bit, 16-pin SSOP format as the PCM1755DBQR. This recommendation applies only when the replacement's control registers, filter behavior, and output configuration satisfy the target design.
Where can I buy PCM1755DBQR and what is its price?
Use the Request a Quote form on this page to request the current price, stock position, minimum order quantity, and lead time for PCM1755DBQR. Commercial terms can change with order quantity and market conditions, so a current quotation is more reliable than a static price. Provide the exact PCM1755DBQR suffix and tape-and-reel packaging requirement with the request.
How much does PCM1755DBQR cost?
The current commercial price for PCM1755DBQR should be obtained through the Request a Quote form on this page. The form can reflect the requested quantity and tape-and-reel packaging rather than presenting a potentially stale unit value. Include your target quantity, ship-to country, and production schedule so the supplier can confirm an actionable quotation.
Is PCM1755DBQR in stock and what is its lead time?
Current stock and lead time for PCM1755DBQR should be confirmed through the Request a Quote form on this page. Availability can vary with the exact suffix, packaging, order quantity, and destination, so a same-day listing does not guarantee every quantity is immediately available. Submit the required quantity and production timing to obtain a current supply commitment.
How should PCM1755DBQR be laid out for low-noise audio?
Place supply-decoupling capacitors close to the device and keep the analog output paths short and symmetrical. Route the I2S clock and data away from the analog outputs, provide a low-impedance ground return, and avoid sharing narrow return paths between the DAC and downstream amplifier. The manufacturer application information should guide the exact output-filter topology, component values, and land pattern.
What are the key specifications of PCM1755DBQR that engineers should know?
The key PCM1755DBQR specifications are 24-bit resolution, up to 200 kHz listed sampling, 106 dB dynamic range, 106 dB typical SNR, 0.002% typical THD+N, 4 VPP typical full-scale output, 4× or 8× oversampling, and 50 dB stop-band attenuation. According to the manufacturer datasheet, the device also supports hardware control or a three-wire serial register-write interface and uses a 16-pin SSOP package.

Datos de referencia de ingeniería para PCM1755DBQR — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose PCM1755DBQR for a new stereo audio DAC design that requires 24-bit conversion, 106 dB typical SNR, I2S connectivity, and register-based software control. Its 106 dB dynamic range, 0.002% typical THD+N, 4× or 8× oversampling, and 200 kHz listed sampling capability suit high-resolution playback, professional monitoring, and network-audio products. PCM1754DBQG4 is the closest documented drop-in choice when its register map, filter behavior, and output configuration satisfy the target board; it can simplify a retrofit because it uses the same 16-pin SSOP format. PCM1755DBQ and PCM1755DBQG4 are ordering-format alternatives for the same PCM1755 device, but the desired assembly method should determine which suffix is ordered. For multichannel or codec-centric designs, a dedicated multichannel converter may reduce the number of separate DACs and simplify synchronization.

Comparación con alternativas

Parámetro Este producto PCM1754DBQG4 PCM1755DBQ PCM1755DBQG4
Package 16-pin SSOP (DBQ) 16-pin SSOP (DBQ) 16-pin SSOP (DBQ) 16-pin SSOP (DBQ)
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Device Type Stereo audio DAC Stereo audio DAC Stereo audio DAC Stereo audio DAC
Data Resolution 24 bit 24 bit 24 bit 24 bit

Diferenciadores clave

  • Software-control capability through a three-wire serial register-write interface (frente a PCM1754DBQG4)
  • High-resolution conversion with a 106 dB dynamic range (frente a PCM1754DBQG4)
  • Flexible digital filtering and broad high-rate support (frente a PCM1754DBQG4)

Notas de diseño

Keep the I2S data and clock routes away from the left and right analog outputs, and use symmetrical geometry for the two channels. Place output-filter components close to the relevant DAC pins, maintain a continuous ground plane beneath the analog section, and return digital and analog currents without sharing narrow paths. This reduces coupling from the 200 kHz-class digital activity into the reconstructed audio and helps preserve channel balance.

Use the manufacturer application circuit as the basis for supply and reference decoupling, then place the required capacitors at the device pins with short, low-inductance connections. The quoted 106 dB SNR, 0.002% THD+N, and 4 VPP output are specified at a 5 V supply, so verify that the power topology provides a stable operating point under the intended load. Pay particular attention to reference noise because it can directly establish the system’s audible noise floor.

Treat the I2S serial clock as a high-speed digital signal even though the audio payload is low bandwidth. Maintain a continuous return path beneath the bus, avoid stubs, and keep clock routing away from the analog output nodes. Confirm the master-clock relationship, bit-clock polarity, data format, and channel selection against the manufacturer configuration tables before releasing the PCB layout.

Información de cumplimiento

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
Libre de plomo
Yes
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The PCM1755DBQR listing identifies RoHS3 compliance and lead-free construction. No additional REACH, AEC-Q100, halogen-free, or conflict-minerals declarations are stated.

Datos verificados el: 2026-11-20 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

PCM1755DBQR datasheet PCM1755DBQR pinout PCM1755DBQR datasheet pdf PCM1755DBQR equivalent PCM1755DBQR replacement PCM1755DBQR cross reference PCM1755DBQR footprint PCM1755DBQR application circuit Texas Instruments PCM1755DBQR PCM1755DBQR vs PCM1754DBQ PCM1755DBQR 106 dB SNR PCM1755DBQR 16 SSOP PCM1755DBQR price PCM1755DBQR stock

Componentes & términos relacionados

Texas Instruments PCM1755DBQR PCM1754DBQG4 PCM1755DBQ PCM1755DBQG4 PCM1755 stereo audio DAC digital-to-analog converter delta-sigma DAC multilevel delta-sigma architecture fourth-order noise shaping eight-level amplitude quantization I2S three-wire serial control digital oversampling dynamic range signal-to-noise ratio THD+N stop-band attenuation clock jitter tolerance 16-pin SSOP surface mount RoHS3 lead-free audio DSP
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ