PCM1760U-X - 20-Bit Dual ADC, 48 kHz | Texas Instruments
N.º de pieza: PCM1760U-X ✓ ActivoPCM1760U-X Descripción general
An audio ADC is a semiconductor that converts continuously varying analog voltages into digital sample data for processing, storage, transmission, or playback. The PCM1760U-X belongs to the ADC/DAC category and uses enhanced noise-shaping technology to reduce quantization-related noise within the audio band. Its dual-channel architecture allows two inputs to share one converter package while retaining separate digital output paths.
The primary verified characteristics are a resolution of 20 bits, two analog input channels, a 48 kHz sampling rate, and a 28-pin SOIC package. The 20-bit word length permits 1,048,576 distinct codes across the converter's full-scale range, while the enhanced noise-shaping approach moves shaped quantization noise away from the most sensitive portion of the audio spectrum. The exact dynamic range, analog input range, SNR, THD, clock requirements, and supported interface modes should be confirmed against the manufacturer datasheet before final circuit design.
The PCM1760U-X is associated with Burr-Brown audio converter designs and is intended for precision digital audio equipment. Potential uses include stereo audio capture, professional audio interfaces, digital mixers, consumer playback equipment, and embedded audio subsystems. Two-channel capture makes the converter particularly useful when left and right signals must be sampled together and processed through a consistent clock and data architecture.
Clocking and digital-interface compatibility are the most important design checks. The supporting clock source, master clock relationship, serial-data format, word length, and required control signals must match the host processor or audio codec. Layout should keep analog input traces short, separate from digital clock and data paths, and terminated according to the impedance of the implemented board stack-up.
This product page combines the confirmed converter specifications, package information, application guidance, and candid replacement limitations. Before committing to a layout, verify analog input range, full-scale scaling, minimum operating voltage, clock frequency, and digital interface details in the Texas Instruments PCM1760U datasheet.
Alternativas directas para PCM1760U-X — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con PCM1760U-X (mismo factor de forma y huella).
PCM1760U
✅ Sustitución directaConsulte el precio
Ver hoja de datos →PCM1761U
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
PCM1762U
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
PCM1792A
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
PCM1700U
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
PCM1760U-X Valores máximos y características eléctricas
| ADC Resolution | 20 bit |
| Number of Analog Input Channels | 2 channels |
| Frecuencia de muestreo | 48 kS/s |
| Conversion Technology | Enhanced noise-shaping ADC |
| Encapsulado | 28-pin SOIC |
| Product Type | Dual-channel audio analog-to-digital converter |
| Architecture | Successive-approximation ADC |
| Input Type | Single-ended analog input |
| Tipo de montaje | Surface mount |
Guía de configuración de pines de PCM1760U-X 28-pin soic
Configuración de pines para PCM1760U-X (encapsulado 28-pin soic). Este componente analógico presenta pines de entrada, salida y alimentación. Consulte la hoja de datos del fabricante para conocer las configuraciones de los pines de ajuste de offset, compensación y habilitación. Ideal para circuitos de acondicionamiento de señal y amplificadores.
No hay datos detallados de patillaje disponibles para PCM1760U-X.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
PCM1760U-X es adecuado para 6 aplicacións: Stereo Audio Capture, Professional Audio Interface, Digital Audio Mixer, Consumer Playback Equipment, Digital Recording System, Audio Measurement Equipment.
Stereo Audio Capture
The PCM1760U-X fits stereo audio capture because it provides two analog input channels, 20-bit resolution, and a 48 kHz sampling rate in one 28-pin SOIC package. The converter can feed left and right program audio into a digital audio processor, storage path, or transmission system while maintaining a shared sampling architecture. Its enhanced noise-shaping implementation is intended to improve in-band audio noise performance. The analog front end must still scale source voltages into the converter's permitted input range and provide suitable impedance. The same clock should drive the converter and the receiving digital device, while the serial-data format and word length must match the host interface. PCB placement should keep the two input paths symmetrical and isolate them from clock and data return currents.
Recomendado
Professional Audio Interface
The PCM1760U-X is appropriate for a two-channel professional audio interface when 48 kHz sampling and 20-bit conversion satisfy the required quality level. Its dual-channel architecture allows one converter package to handle a stereo input section instead of requiring two separate converter devices. Signal conditioning ahead of the ADC remains essential: microphone or line-level inputs need the correct gain, impedance, anti-alias filtering, and grounding. The digital side should use a supported master-clock relationship and serial format recognized by the audio codec or processor. Review the manufacturer datasheet for jitter tolerance, supported data formats, and digital timing before synchronizing the converter with a larger system. Careful analog placement is equally important for avoiding channel-to-channel skew and noise coupling.
Recomendado
Digital Audio Mixer
The PCM1760U-X can serve as the stereo input converter in a digital mixer when the mixer operates at a 48 kHz sample rate. Two independent analog channels support balanced or unbalanced stereo sources after the appropriate front-end circuitry. Conversion to digital data allows mixing, filtering, level control, and effects to be performed in a digital signal processor. The converter's 20-bit word length is relevant to preserving low-level signal detail, while the enhanced noise-shaping architecture targets audible-band quantization noise. Clock architecture must keep the PCM1760U-X and digital processing engine in a supported relationship. The board should reserve proper return paths for analog and digital grounds and keep processor clock traces away from the converter inputs to avoid coupling switching or processing noise into the audio path.
Recomendado
Consumer Playback Equipment
The PCM1760U-X can be evaluated for consumer playback equipment that converts two analog channels into a digital audio stream at 48 kHz. This arrangement is useful in compact source components, digital amplifiers, recorder interfaces, and legacy audio systems designed around the PCM1760 family. The dual inputs reduce component count, while the 20-bit resolution supports the stated precision use case. Implementation still requires an analog source selector or buffer, an anti-alias filter, and an appropriate output volume or gain stage. Verify the supported digital interface and supply requirements against the host device. A common 48 kHz clock should be distributed cleanly to all audio paths, and the converter's analog and digital sections should be separated to preserve signal quality in compact consumer enclosures.
Recomendado
Digital Recording System
The PCM1760U-X is suitable for a two-channel digital recording system that samples at 48 kHz and stores or processes 20-bit audio data. Typical signal flow consists of two buffered inputs, conversion by the PCM1760U-X, clocked transmission to a digital processor, and storage or encoding downstream. The converter's dual-channel architecture preserves a consistent architecture for stereo or paired-channel capture. Anti-alias filtering must be selected using the actual input bandwidth and sample rate. The system designer should also account for clock jitter, digital data timing, channel matching, and grounding when selecting the interconnect and layout strategy. Use the manufacturer PCM1760U documentation for the exact input scaling and supported serial modes before assigning analog and digital power domains.
Recomendado
Audio Measurement Equipment
The PCM1760U-X can form part of an audio measurement or signal-analysis instrument when the target is 48 kHz sampling and two simultaneous input channels. Its 20-bit conversion resolution provides a defined digital representation for later numerical analysis, filtering, or spectral processing. Measurement accuracy still depends on the complete analog front end, including source impedance, gain calibration, anti-alias filtering, reference stability, and channel matching. The converter should be positioned close to the input network to minimize analog trace length and susceptibility to interference. Its clock and data routes require controlled impedance and return-path design so that digital activity does not distort the measurement. Confirm operating voltage, timing, and interface limits in the Texas Instruments datasheet, then validate channel skew and noise performance at the system level.
Recomendado
Datos de referencia de ingeniería para PCM1760U-X — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto |
|---|---|
| ADC Resolution | 20 bit |
| Analog Input Channels | 2 channels |
| Sampling Rate | 48 kS/s |
| Conversion Architecture | Enhanced noise-shaping ADC |
| Package | 28-pin SOIC |
| Brand | Texas Instruments |
| Product Type | Dual-channel analog-to-digital converter |
| Mounting Type | Surface mount |
Diferenciadores clave
- Two-channel 20-bit conversion in a single 28-pin SOIC (frente a PCM1792A)
- Enhanced noise-shaping conversion architecture (frente a PCM1700U)
- Established dual-channel 48 kHz audio conversion role (frente a Single-channel conversion designs)
Notas de diseño
Place the converter close to the analog input network and route each channel as a compact, symmetrical analog path. Keep digital clock, serial-data, and control traces away from the input pins, particularly the clock because it can capacitively couple into high-impedance sources. Provide a continuous ground reference under the analog section and use a ground partition only where the complete system architecture supports it.
The audio clock must satisfy the timing and jitter requirements stated in the Texas Instruments PCM1760U datasheet. Distribute a low-jitter 48 kHz-related clock with short, controlled routes and confirm that the host device supports the converter's serial-data format. Validate the complete digital interface with source-synchronous timing measurements after layout because converter operation can be compromised by data setup, hold, or clock-edge errors.
Do not assume that a converter with the same channel count is electrically interchangeable. Before substituting another ADC, verify the 28-pin SOIC footprint, pin assignments, supply voltage, analog input range, sampling rate, master-clock ratio, data format, word length, and control signals. The PCM1760U, PCM1792A, and PCM1700U names appearing in comparison listings do not by themselves establish drop-in compatibility.
Información de cumplimiento
The manufacturer PCM1760U datasheet and product documentation should be consulted for environmental, material, and finish declarations. No RoHS, REACH, lead-free, halogen-free, or conflict-minerals status was confirmed for this ordering code.