PCM1760U-X - 20-Bit Dual ADC, 48 kHz | Texas Instruments
MPN: PCM1760U-X ✓ 啟用中PCM1760U-X 概覽
An audio ADC is a semiconductor that converts continuously varying analog voltages into digital sample data for processing, storage, transmission, or playback. The PCM1760U-X belongs to the ADC/DAC category and uses enhanced noise-shaping technology to reduce quantization-related noise within the audio band. Its dual-channel architecture allows two inputs to share one converter package while retaining separate digital output paths.
The primary verified characteristics are a resolution of 20 bits, two analog input channels, a 48 kHz sampling rate, and a 28-pin SOIC package. The 20-bit word length permits 1,048,576 distinct codes across the converter's full-scale range, while the enhanced noise-shaping approach moves shaped quantization noise away from the most sensitive portion of the audio spectrum. The exact dynamic range, analog input range, SNR, THD, clock requirements, and supported interface modes should be confirmed against the manufacturer datasheet before final circuit design.
The PCM1760U-X is associated with Burr-Brown audio converter designs and is intended for precision digital audio equipment. Potential uses include stereo audio capture, professional audio interfaces, digital mixers, consumer playback equipment, and embedded audio subsystems. Two-channel capture makes the converter particularly useful when left and right signals must be sampled together and processed through a consistent clock and data architecture.
Clocking and digital-interface compatibility are the most important design checks. The supporting clock source, master clock relationship, serial-data format, word length, and required control signals must match the host processor or audio codec. Layout should keep analog input traces short, separate from digital clock and data paths, and terminated according to the impedance of the implemented board stack-up.
This product page combines the confirmed converter specifications, package information, application guidance, and candid replacement limitations. Before committing to a layout, verify analog input range, full-scale scaling, minimum operating voltage, clock frequency, and digital interface details in the Texas Instruments PCM1760U datasheet.
直接替換替代品,適用於 PCM1760U-X — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
PCM1760U
✅ 直接替換聯絡詢價
查看資料表 →PCM1761U
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
PCM1762U
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
PCM1792A
✅ 直接替換📋 參考替代品(不在目錄中)
PCM1700U
✅ 直接替換📋 參考替代品(不在目錄中)
PCM1760U-X 最大額定值與電氣特性
| ADC Resolution | 20 bit |
| Number of Analog Input Channels | 2 channels |
| 取樣率 | 48 kS/s |
| Conversion Technology | Enhanced noise-shaping ADC |
| 封裝 | 28-pin SOIC |
| Product Type | Dual-channel audio analog-to-digital converter |
| Architecture | Successive-approximation ADC |
| Input Type | Single-ended analog input |
| 安裝類型 | Surface mount |
PCM1760U-X 28-pin soic 腳位配置指南
PCM1760U-X(28-pin soic 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: PCM1760U-X.
請參閱 資料表 以查看完整腳位配置。
典型應用
PCM1760U-X 適用於 6 應用s: Stereo Audio Capture, Professional Audio Interface, Digital Audio Mixer, Consumer Playback Equipment, Digital Recording System, Audio Measurement Equipment.
Stereo Audio Capture
The PCM1760U-X fits stereo audio capture because it provides two analog input channels, 20-bit resolution, and a 48 kHz sampling rate in one 28-pin SOIC package. The converter can feed left and right program audio into a digital audio processor, storage path, or transmission system while maintaining a shared sampling architecture. Its enhanced noise-shaping implementation is intended to improve in-band audio noise performance. The analog front end must still scale source voltages into the converter's permitted input range and provide suitable impedance. The same clock should drive the converter and the receiving digital device, while the serial-data format and word length must match the host interface. PCB placement should keep the two input paths symmetrical and isolate them from clock and data return currents.
推薦
Professional Audio Interface
The PCM1760U-X is appropriate for a two-channel professional audio interface when 48 kHz sampling and 20-bit conversion satisfy the required quality level. Its dual-channel architecture allows one converter package to handle a stereo input section instead of requiring two separate converter devices. Signal conditioning ahead of the ADC remains essential: microphone or line-level inputs need the correct gain, impedance, anti-alias filtering, and grounding. The digital side should use a supported master-clock relationship and serial format recognized by the audio codec or processor. Review the manufacturer datasheet for jitter tolerance, supported data formats, and digital timing before synchronizing the converter with a larger system. Careful analog placement is equally important for avoiding channel-to-channel skew and noise coupling.
推薦
Digital Audio Mixer
The PCM1760U-X can serve as the stereo input converter in a digital mixer when the mixer operates at a 48 kHz sample rate. Two independent analog channels support balanced or unbalanced stereo sources after the appropriate front-end circuitry. Conversion to digital data allows mixing, filtering, level control, and effects to be performed in a digital signal processor. The converter's 20-bit word length is relevant to preserving low-level signal detail, while the enhanced noise-shaping architecture targets audible-band quantization noise. Clock architecture must keep the PCM1760U-X and digital processing engine in a supported relationship. The board should reserve proper return paths for analog and digital grounds and keep processor clock traces away from the converter inputs to avoid coupling switching or processing noise into the audio path.
推薦
Consumer Playback Equipment
The PCM1760U-X can be evaluated for consumer playback equipment that converts two analog channels into a digital audio stream at 48 kHz. This arrangement is useful in compact source components, digital amplifiers, recorder interfaces, and legacy audio systems designed around the PCM1760 family. The dual inputs reduce component count, while the 20-bit resolution supports the stated precision use case. Implementation still requires an analog source selector or buffer, an anti-alias filter, and an appropriate output volume or gain stage. Verify the supported digital interface and supply requirements against the host device. A common 48 kHz clock should be distributed cleanly to all audio paths, and the converter's analog and digital sections should be separated to preserve signal quality in compact consumer enclosures.
推薦
Digital Recording System
The PCM1760U-X is suitable for a two-channel digital recording system that samples at 48 kHz and stores or processes 20-bit audio data. Typical signal flow consists of two buffered inputs, conversion by the PCM1760U-X, clocked transmission to a digital processor, and storage or encoding downstream. The converter's dual-channel architecture preserves a consistent architecture for stereo or paired-channel capture. Anti-alias filtering must be selected using the actual input bandwidth and sample rate. The system designer should also account for clock jitter, digital data timing, channel matching, and grounding when selecting the interconnect and layout strategy. Use the manufacturer PCM1760U documentation for the exact input scaling and supported serial modes before assigning analog and digital power domains.
推薦
Audio Measurement Equipment
The PCM1760U-X can form part of an audio measurement or signal-analysis instrument when the target is 48 kHz sampling and two simultaneous input channels. Its 20-bit conversion resolution provides a defined digital representation for later numerical analysis, filtering, or spectral processing. Measurement accuracy still depends on the complete analog front end, including source impedance, gain calibration, anti-alias filtering, reference stability, and channel matching. The converter should be positioned close to the input network to minimize analog trace length and susceptibility to interference. Its clock and data routes require controlled impedance and return-path design so that digital activity does not distort the measurement. Confirm operating voltage, timing, and interface limits in the Texas Instruments datasheet, then validate channel skew and noise performance at the system level.
推薦
工程參考資料,適用於 PCM1760U-X — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 |
|---|---|
| ADC Resolution | 20 bit |
| Analog Input Channels | 2 channels |
| Sampling Rate | 48 kS/s |
| Conversion Architecture | Enhanced noise-shaping ADC |
| Package | 28-pin SOIC |
| Brand | Texas Instruments |
| Product Type | Dual-channel analog-to-digital converter |
| Mounting Type | Surface mount |
主要差異化特點
- Two-channel 20-bit conversion in a single 28-pin SOIC (對比PCM1792A)
- Enhanced noise-shaping conversion architecture (對比PCM1700U)
- Established dual-channel 48 kHz audio conversion role (對比Single-channel conversion designs)
設計說明
Place the converter close to the analog input network and route each channel as a compact, symmetrical analog path. Keep digital clock, serial-data, and control traces away from the input pins, particularly the clock because it can capacitively couple into high-impedance sources. Provide a continuous ground reference under the analog section and use a ground partition only where the complete system architecture supports it.
The audio clock must satisfy the timing and jitter requirements stated in the Texas Instruments PCM1760U datasheet. Distribute a low-jitter 48 kHz-related clock with short, controlled routes and confirm that the host device supports the converter's serial-data format. Validate the complete digital interface with source-synchronous timing measurements after layout because converter operation can be compromised by data setup, hold, or clock-edge errors.
Do not assume that a converter with the same channel count is electrically interchangeable. Before substituting another ADC, verify the 28-pin SOIC footprint, pin assignments, supply voltage, analog input range, sampling rate, master-clock ratio, data format, word length, and control signals. The PCM1760U, PCM1792A, and PCM1700U names appearing in comparison listings do not by themselves establish drop-in compatibility.
合規資訊
The manufacturer PCM1760U datasheet and product documentation should be consulted for environmental, material, and finish declarations. No RoHS, REACH, lead-free, halogen-free, or conflict-minerals status was confirmed for this ordering code.