PIC12HV615T-I/MD - 8-Bit 20MHz 1.75KB Flash MCU | Microchip
N.º de pieza: PIC12HV615T-I/MD ✓ Activo| Cant. | Precio unitario | Total |
|---|---|---|
| 1 | $1.42 | $1,42 |
| 10 | $1.28 | $12,80 |
| 100 | $1.14 | $114,00 |
| 500 | $1.02 | $510,00 |
| 1.000 | $0.91 | $910,00 |
| 3.300 | $0.83 | $2.739,00 |
PIC12HV615T-I/MD Descripción general
A microcontroller (MCU) is a single-chip computer containing a CPU, non-volatile program memory, RAM, and programmable I/O peripherals. The PIC12HV615 belongs to the PIC12 family of 8-bit RISC microcontrollers from Microchip, which sits within the broader 8-bit microcontroller hierarchy: 8-bit MCU -> RISC microcontroller -> embedded controller -> semiconductor. The "HV" prefix denotes an integrated shunt voltage regulator, a niche feature that lets the chip self-regulate from a wide input range while the 8-pin DFN package keeps the solution footprint minimal.
Key features include six general-purpose I/O pins, four 10-bit ADC channels, two 8-bit timers plus one 16-bit timer, an enhanced PWM/Capture/Compare module, an internal 8 MHz oscillator with PLL for 32 MHz operation, and a configurable 5-bit DAC. The HV shunt regulator accepts inputs above 2.5 V and tolerates voltage drops from unregulated supplies, which simplifies isolated or energy-harvesting designs. Debug is supported through the ICSP interface using Microchip's MPLAB® PICkit™ 5 in-circuit debugger.
Typical applications include LED lighting controllers, sensor signal conditioning, battery chargers, and low-cost consumer appliance controls where board space is constrained. The DFN exposed-pad package enables efficient heat dissipation for the HV regulator while maintaining a 3 x 3 mm footprint suitable for hand-held and IoT-style enclosures. When selecting this part, ensure the application's input impedance allows the HV shunt regulator to source sufficient bias current (typically 5 mA minimum) - otherwise the optional PIC12F615 (without HV) is the lower-cost alternative.
This page synthesizes distributor pricing, drop-in alternatives, and engineering design notes beyond the manufacturer datasheet summary, with cross-references to functionally equivalent parts in the same DFN-8 footprint.
Alternativas directas para PIC12HV615T-I/MD — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con PIC12HV615T-I/MD (mismo factor de forma y huella) — difiere en Internal Oscillator, Package, ADC, Comparators, Timers.
Herramienta de comparación rápida — seleccione piezas alternativas para compararlas lado a lado:
PIC12HV615-I/MD
✅ Sustitución directa ⚠️ Especificaciones sin verificar✓ En stock
$0.78 / unidad
Ver hoja de datos →PIC12HV615T-I/MG
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
PIC12HV615-E/MD
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
PIC12F615T-I/MD
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
PIC12F617T-I/MF
✅ Sustitución directa✓ En stock
$1.19 / unidad
Ver hoja de datos →PIC12F683T-I/MD
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
PIC12F509T-I/MD
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
PIC12HV615T-I/MD Valores máximos y características eléctricas
| Architecture | PIC12 (enhanced mid-range 8-bit RISC) |
| Program Memory | 1.75 KB Flash |
| SRAM | 64 bytes |
| EEPROM | 128 bytes |
| Maximum Clock Speed | 20 MHz |
| Tensión de alimentación | 2.5 V / 3.3 V / 5 V |
| I/O Pins | 6 |
| ADC Channels | 4 x 10-bit |
| Timers | 2 x 8-bit, 1 x 16-bit |
| PWM/Capture/Compare | Enhanced ECCP module |
| DAC | 5-bit |
| Internal Oscillator | 8 MHz (with PLL up to 32 MHz) |
| Special Feature | HV shunt voltage regulator |
| Temperatura de funcionamiento | -40C to +85C (Industrial) |
| Encapsulado | 8-pin DFN (MD), 3 x 3 mm, exposed pad |
| Tipo de montaje | Surface Mount |
| Estado del ciclo de vida | ACTIVE |
Configuración de pines de PIC12HV615T-I/MD
| Pin 1 | GP3/MCLR/VPP — General-purpose I/O / Master Clear reset / Programming voltage |
| Pin 2 | VDD — Positive supply voltage (HV shunt regulator input/output) |
| Pin 3 | VSS — Ground reference |
| Pin 4 | GP0/AN0/CIN+/PWM0 — GPIO / Analog ch0 / Comparator input+ / PWM output |
| Pin 5 | GP1/AN1/CIN-/PWM1 — GPIO / Analog ch1 / Comparator input- / PWM output |
| Pin 6 | GP2/AN2/T0CKI/PWM2 — GPIO / Analog ch2 / Timer0 clock / PWM output |
| Pin 7 | GP4/AN3/PWM3 — GPIO / Analog ch3 / PWM output |
| Pin 8 | GP5/AN4/T1CKI/PWM4/CLKIN — GPIO / Analog ch4 / Timer1 clock / PWM / external clock input |
Aplicaciones típicas
PIC12HV615T-I/MD es adecuado para 6 aplicacións: LED Lighting Controllers, Solar-Powered Sensor Nodes, Battery Charger Controllers, Industrial Sensor Signal Conditioning, Low-Cost Consumer Appliance Control, Automotive Accessory Modules.
LED Lighting Controllers
The PIC12HV615T-I/MD's integrated HV shunt regulator simplifies constant-current LED driver designs by allowing direct operation from a 12 V or 24 V LED bus without an external regulator. The enhanced PWM module (ECCP) provides flexible dimming via PWM frequency and duty cycle control up to 20 MHz resolution, while the 4-channel 10-bit ADC enables closed-loop current sensing for accurate lumen output. The DFN-8 exposed-pad package keeps the solution footprint under 5 mm x 5 mm, ideal for MR16 and linear LED tubes.
Recomendado
Solar-Powered Sensor Nodes
Energy-harvesting applications benefit from the PIC12HV615T-I/MD's HV shunt regulator, which accepts fluctuating solar cell voltages from 2.5 V to 13 V without external regulation. The chip's 8 MHz internal oscillator with PLL eliminates external crystal cost, while low-power sleep modes and the 5-bit DAC support adaptive sensor sampling. Battery charging profiles can be implemented in firmware using the 16-bit timer and ADC for voltage/current monitoring.
Recomendado
Battery Charger Controllers
The PIC12HV615T-I/MD serves as a low-cost battery management controller for 1-cell Li-ion or NiMH packs, with its HV shunt handling 5 V or 12 V wall-adapter inputs directly. The 4-channel 10-bit ADC monitors battery voltage, charge current, and temperature thermistor inputs simultaneously, while the ECCP PWM module regulates charge current through a MOSFET or BJT. Firmware-controlled CC-CV charge profiles can be tuned without hardware changes.
Recomendado
Industrial Sensor Signal Conditioning
Industrial 4-20 mA loop-powered transmitters benefit from the PIC12HV615T-I/MD's HV regulator, which operates directly from loop current without additional regulation stages. The 10-bit ADC with internal voltage reference provides ratiometric measurements for bridge sensors, RTDs, and thermocouples. The 8-pin DFN package and industrial -40C to +85C temperature range suit harsh factory environments, while the enhanced mid-range core delivers 5 MIPS for digital filtering.
Recomendado
Low-Cost Consumer Appliance Control
Small kitchen and personal-care appliances use the PIC12HV615T-I/MD as a single-chip control MCU with the HV regulator simplifying universal-input power supply designs. The 6 I/O pins drive relays, triacs, buttons, and LEDs directly, while the PWM module controls motor speed or heater duty cycle. The 1.75 KB Flash accommodates standard wash, blend, and timing profiles typical of blenders, toothbrushes, and small pumps.
Recomendado
Automotive Accessory Modules
Aftermarket automotive accessories such as alarm sensors, lighting controllers, and gauge displays use the PIC12HV615T-I/MD (extended grade) to interface directly with the 12 V vehicle battery without external regulators. The 16-bit timer accurately measures engine RPM or wheel speed from digital sensors, while the ADC monitors battery voltage for low-voltage cutoff. Industrial temperature grade handles under-dash thermal conditions.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para PIC12HV615T-I/MD — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | PIC12HV615-I/MD | PIC12HV615-E/MD | PIC12F615T-I/MD | PIC12F617T-I/MF | PIC12F683T-I/MD |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | DFN-8 (MD) 3x3mm | DFN-8 (MD) 3x3mm - same | DFN-8 (MD) 3x3mm - same | DFN-8 (MD) 3x3mm - same | DFN-8 (MF) 3x3mm - same footprint | DFN-8 (MD) 3x3mm - same |
| Program Memory | 1.75 KB Flash | 1.75 KB Flash | 1.75 KB Flash | 1.75 KB Flash | 3.5 KB Flash (+100%) | 2 KB Flash (+14%) |
| SRAM | 64 bytes | 64 bytes | 64 bytes | 64 bytes | 128 bytes (+100%) | 256 bytes (+300%) |
| HV Shunt Regulator | Yes (integrated) | Yes | Yes | No | No | No |
| Maximum Clock Speed | 20 MHz (8 MHz internal w/ PLL to 32 MHz) | 20 MHz | 20 MHz | 20 MHz | 20 MHz | 20 MHz |
| ADC | 4 x 10-bit | 4 x 10-bit | 4 x 10-bit | 4 x 10-bit | 4 x 10-bit | 4 x 10-bit |
| Temperature Grade | Industrial (-40C to +85C) | Industrial | Extended (-40C to +125C) | Industrial | Industrial | Industrial |
Diferenciadores clave
- Integrated HV shunt regulator eliminates external 5V/12V LDO (frente a PIC12F615T-I/MD)
- Drop-in same-footprint upgrade path with 4x more program memory (frente a PIC12F617T-I/MF)
- Extended temperature grade option available in same package (frente a PIC12HV615-I/MD)
Notas de diseño
The PIC12HV615T-I/MD's integrated HV shunt regulator requires a minimum bias current of approximately 5 mA to maintain regulation. When designing the input resistor network, calculate R = (Vin - 5.0V) / 5 mA to ensure proper operation across the full supply range. Below the minimum current, VDD will droop and the MCU will brown out. Use a 1% tolerance resistor for accurate regulation setpoint.
The HV shunt regulator dissipates (Vin - 5.0V) * I_bias power. At Vin=12V and 5 mA bias, this is 35 mW - negligible. However, at Vin=15V with higher bias currents, dissipation can reach 100-150 mW and the 8-pin DFN exposed pad becomes critical for heat removal. Connect the exposed pad to a 5 mm x 5 mm copper pour with thermal vias to a ground plane for reliable operation.
Place the HV shunt series resistor and VDD bypass capacitor (100 nF ceramic minimum, 10 uF tantalum recommended) within 3 mm of pins 2 (VDD) and 3 (VSS). The exposed thermal pad must be soldered to a top-layer copper pour and stitched with thermal vias (0.3 mm drill, 0.5 mm pitch) to the internal ground plane. Avoid routing signal traces under the exposed pad to prevent leakage.
The MCLR pin (pin 1) is internally open-drain on the HV variants and requires a 10 kohm pull-up to VDD for normal operation - omitting this prevents startup. ICSP programming requires high-voltage (typically 13V) on MCLR; use a programming header with proper isolation diodes if MCLR is shared with external reset circuitry. The GP3 pin is input-only - do not configure it as output.
Route the ADC analog inputs (GP0, GP1, GP2, GP4) away from PWM outputs (GP2, GP4, GP5) and digital switching signals to minimize crosstalk. Use a ground star-point topology with VSS pin and exposed pad converging at the bypass capacitor ground. Keep ADC reference voltage traces short and guarded with ground pours for accurate 10-bit conversions.
Información de cumplimiento
RoHS and REACH compliant per Microchip product page. Lead-free and halogen-free per Microchip environmental compliance data. AEC-Q100 not qualified - the automotive-grade equivalent is PIC12HV615T-I/MG with explicit AEC-Q100 documentation.
