PIC16F610-E/SL - 8-Bit 20MHz Flash MCU | Microchip Technology
N.º de pieza: PIC16F610-E/SL ✓ ActivoPIC16F610-E/SL Descripción general
A PIC16-family 8-bit microcontroller is a programmable semiconductor that combines a CPU core, flash program memory, RAM, and integrated peripherals in one device. PIC16F610 belongs to the broader hierarchy of embedded microcontroller, microprocessor, semiconductor, and embedded-processing components. Its compact package makes it suitable for cost-sensitive control boards, sensor nodes, appliance controls, and small industrial equipment where board area and simplicity matter.
Key characteristics include an 8-bit CPU, 20 MHz maximum operating frequency, 1.75 KB flash memory organized as 1K x 14 words, 72 bytes of RAM, and a 14-pin SOIC package. The flash-based architecture permits in-system programming and supports repeatable firmware updates. The device operates across a 2.5 V, 3.3 V, or 5 V supply range as described by the manufacturer listing, making it flexible for common embedded supply rails.
The PIC16F610-I/SL is a closely related same-package variant identified in the comparison results. The -E/SL part is the extended-temperature selection, making it preferable when the enclosure temperature exceeds the industrial-temperature range. The shared 14-pin SOIC footprint simplifies mechanical comparison, while firmware, oscillator configuration, peripheral availability, and electrical limits should still be checked against the manufacturer datasheet before substitution.
Typical applications include compact motor and relay controllers, digital thermometers, LED status indicators, sensor-interface boards, programmable timers, and low-cost embedded control modules. For each application, the 1.75 KB flash budget favors small programs, while 72 bytes of RAM should be considered carefully when local buffering or stack requirements are high.
When laying out the PCB, keep decoupling close to the supply pins, route oscillator and reset-related connections according to the datasheet guidance, and verify the exposed board area and soldering profile of the 14-pin SOIC. Firmware development should use the programming and debug interface specified by Microchip Technology, with particular attention to configuration-word settings, clock selection, and brownout behavior.
Alternativas directas para PIC16F610-E/SL — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con PIC16F610-E/SL (mismo factor de forma y huella) — difiere en Instruction Set, Operating Temperature, Package, Supply Voltage Range.
PIC16F610-I/SL
✅ Sustitución directaConsulte el precio
Ver hoja de datos →PIC16F610T-I/SL
✅ Sustitución directa ⚠️ Especificaciones sin verificarConsulte el precio
Ver hoja de datos →PIC16F610-E/SL
✅ Sustitución directa ⚠️ Especificaciones sin verificarConsulte el precio
Ver hoja de datos →PIC16F610-E/SL Valores máximos y características eléctricas
| Product Type | 8-bit flash-based microcontroller |
| Architecture | PIC 16F 8-bit RISC |
| Maximum Operating Frequency | 20 MHz |
| Program Memory | 1.75 KB flash |
| Program Memory Organization | 1K x 14 words |
| RAM | 72 bytes |
| Supply Voltage Range | 2.5 V to 5 V |
| Temperature Grade | Extended temperature |
| Encapsulado | 14-pin SOIC |
| Package Width | 3.90 mm |
| Package Lead Pitch | 0.154 in |
| Tipo de montaje | Surface mount |
| Programming Memory | Flash |
| Instruction Set | 8-bit PIC instruction set |
| Manufacturer Status | In Production |
| Estado RoHS | Compliant |
Guía de configuración de pines de PIC16F610-E/SL 0.154 in
Configuración de pines para PIC16F610-E/SL (encapsulado 0.154 in). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para PIC16F610-E/SL.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
PIC16F610-E/SL es adecuado para 6 aplicacións: Compact industrial sensor controllers, LED status and warning panels, Small appliance control modules, Programmable timers and sequencers, Relay and switch interface boards, Battery-powered IoT sensor nodes.
Compact industrial sensor controllers
The PIC16F610-E/SL fits compact sensor controllers that read switches, potentiometers, or simple digital sensors and perform local thresholding or control logic. Its 8-bit CPU operates up to 20 MHz, while 1.75 KB of flash provides room for compact firmware and 72 bytes of RAM serves short-lived working variables. The extended-temperature -E grade is useful when the controller operates in a temperature range beyond the -I grade. Place the SOIC close to the sensor interface and power-conditioning circuitry, and verify the actual enclosure temperature against the manufacturer limits.
Recomendado
LED status and warning panels
The PIC16F610-E/SL can control LED indicators, warning lamps, and status sequences in small panels because its 20 MHz processing speed supports responsive timing and simple multiplexed displays. The 1.75 KB flash budget is adequate for short animation patterns and debounce logic, while 72 bytes of RAM constrains how much display history can be buffered locally. Current limiting should be implemented in hardware or firmware, and timing must account for the MCU's operating conditions. A panel with multiple animation states and logging requirements may need a larger memory footprint.
Recomendado
Small appliance control modules
The PIC16F610-E/SL is appropriate for small appliance subassemblies such as timers, mode selectors, fan controllers, and simple user-interface interfaces. Its 20 MHz 8-bit core can execute deterministic control routines, and 1.75 KB of flash supports a compact state machine rather than a large application framework. The 72-byte RAM requirement makes stack and variable allocation important for firmware planning. The 14-pin SOIC also allows compact replacement of a larger through-hole controller when the board is redesigned.
Recomendado
Programmable timers and sequencers
The PIC16F610-E/SL can implement programmable interval timers, relay sequences, pump duty cycles, and timed actuator controls. Its 20 MHz operating speed provides ample instruction timing for deterministic scheduling, while flash permits firmware-only changes to timing tables and operating profiles. The limited 72 bytes of RAM means long event histories should not be stored locally. Use timer hardware for long delays where possible, and validate oscillator accuracy and timing tolerance across the intended supply and temperature range.
Recomendado
Relay and switch interface boards
The PIC16F610-E/SL is suitable for small relay or switch-interface boards that translate sensed inputs into controlled outputs. Its 1.75 KB flash memory can hold debounce, state-machine, safety, and actuator-control routines, while the 20 MHz CPU supports fast input polling. Designers should avoid driving inductive loads directly from MCU pins and instead use suitable driver circuitry. The 14-pin package leaves a limited number of I/O pins, so pin budgeting must include supply, programming, oscillator, and any communication interface.
Recomendado
Battery-powered IoT sensor nodes
The PIC16F610-E/SL can serve as the low-power control core in a small IoT sensor node when the radio and sensor themselves require little data processing. The compact 14-pin SOIC and 1.75 KB flash help constrain board area, and the 20 MHz clock provides flexibility for periodic measurement and communication control. Low-power performance depends on the selected oscillator, peripherals, firmware, and sleep implementation, so measure current in the final design rather than inferring it from the maximum clock rate. Keep wake-up and sensor settling behavior within the node's energy budget.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para PIC16F610-E/SL — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | PIC16F610-I/SL | PIC16F610T-I/SL | PIC16F610-E/SL |
|---|---|---|---|---|
| Package | 14-pin SOIC | 14-pin SOIC | 14-pin SOIC | 14-pin SOIC |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| CPU Architecture | 8-bit PIC RISC | 8-bit PIC RISC | 8-bit PIC RISC | 8-bit PIC RISC |
| Maximum Frequency | 20 MHz | 20 MHz | 20 MHz | 20 MHz |
| Program Memory | 1.75 KB flash | 1.75 KB flash | 1.75 KB flash | 1.75 KB flash |
| RAM | 72 bytes | 72 bytes | 72 bytes | 72 bytes |
Diferenciadores clave
- Extended-temperature ordering option in the 14-pin SOIC family (frente a PIC16F610-I/SL)
- Compact 1.75 KB flash footprint for small control programs (frente a PIC16F610-I/SL)
- 20 MHz performance in a 14-pin SOIC package (frente a PIC16F610T-I/SL)
Notas de diseño
Use the official 14-pin SOIC land pattern rather than scaling a generic footprint from the 0.154 in lead pitch alone. Package width, lead length, toe, and heel dimensions affect solder-joint volume and paste printing. Place the MCU close to the supply bypass capacitor, connect the ground pins to an uninterrupted ground plane, and route programming, oscillator, and reset nets away from noisy switching nodes.
Budget the 2.5 V to 5 V operating range against the system rail and peripheral requirements. Confirm the selected oscillator configuration and configuration-word settings against the manufacturer datasheet before programming. Decoupling capacitance and ESR requirements should follow the datasheet and the worst-case supply network, since the short 14-pin package leaves little room for oversized capacitors or long current paths.
Do not treat a shared SOIC package as sufficient proof of replacement compatibility. Compare the complete numbered pin table, I/O direction, analog-capable pins, oscillator pins, programming interface, reset behavior, peripheral set, configuration words, supply limits, and temperature grade. The 1.75 KB program memory and 72-byte RAM also require a firmware budget check because pin-compatible alternatives cannot remove memory constraints.
Keep oscillator traces short and provide a clean return path to the ground pins. If the design includes sensitive analog sensing, isolate the microcontroller's switching and programming activity from the sensor front end. Firmware should mask or configure unused pins consistently according to the manufacturer's guidance to prevent unintended inputs, oscillation, or excess current during testing.
Información de cumplimiento
The Microchip Technology product listing identifies RoHS compliance. REACH, lead-free, halogen-free, conflict-minerals, and AEC-Q100 status were not established by the available manufacturer information.