ATTINY824-SSU - 20MHz 8KB AVR Microcontroller | Microchip
N.º de pieza: ATTINY824-SSU ✓ ActivoATTINY824-SSU Descripción general
A microcontroller is a programmable semiconductor that integrates a CPU core, memory, digital I/O, and peripherals on one die. The ATTINY824 belongs to the tinyAVR 2 family, a low-power 8-bit branch of the AVR microcontroller architecture. Engineers use this class of device for compact control tasks where small package size, simple firmware, and deterministic peripheral operation are more important than the processing power of a higher-bit-field MCU.
The device provides 8 KB of Flash for program storage, 1 KB of SRAM for working data, and 128 bytes of EEPROM for nonvolatile parameter retention. Its 20 MHz maximum clock rate supports responsive control loops, while 12 I/O pins provide access to digital interfaces and external circuitry. According to the manufacturer product page, the family is available in 14-pin TSSOP and SOIC packages, with the ATTINY824-SSU specifically using the 14-pin SOIC format.
Program storage uses in-system reprogrammable Flash organized into pages for AVR instruction storage. The architecture includes I2C, SPI, and UART/USART connectivity, allowing the microcontroller to communicate with sensors, serial memories, transceivers, and host systems. Its mix of embedded communications and general-purpose I/O makes it suitable for compact peripheral controllers rather than general desktop processing.
Typical uses include industrial sensor nodes, compact motor and actuator controllers, building or access-control peripherals, communication bridges, and low-power embedded instrumentation. Designers can connect the serial interfaces to external sensors or transceivers while using the GPIO for status indicators, switches, relays, or data acquisition inputs.
The main design consideration is pin and power planning. Confirm the complete 14-pin SOIC pin assignment, decoupling requirements, clock configuration, programming interface, and operating-voltage limits in the manufacturer data sheet before layout. Preserve access to the programming signals and route sensitive serial or analog inputs away from fast-switching nodes.
This product page combines the manufacturer specifications, package information, sourcing guidance, functional comparisons, and practical design notes in one engineering-focused view. It supports faster part selection while highlighting the memory, clock, interface, package, and replacement considerations that determine whether ATTINY824-SSU fits a specific embedded-control design.
Alternativas directas para ATTINY824-SSU — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con ATTINY824-SSU (mismo factor de forma y huella) — difiere en EEPROM, Package, SRAM.
ATTINY424-SSU
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
ATTINY426-SSU
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
ATTINY827-SSU
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
ATTINY824-SSU Valores máximos y características eléctricas
| Product Type | 8-bit AVR tinyAVR 2 microcontroller |
| Maximum CPU Frequency | 20 MHz |
| Flash Memory | 8 KB |
| Flash Organization | 4K x 16-bit pages |
| SRAM | 1 KB |
| EEPROM | 128 bytes |
| General-Purpose I/O Pins | 12 pins |
| Operating Voltage Range | 1.8 V to 5.5 V |
| CPU Architecture | AVR with hardware multiplier |
| Instruction Word Width | 16-bit or 32-bit |
| Serial Interfaces | I2C, SPI, UART/USART |
| Encapsulado | 14-pin SOIC |
| Tipo de montaje | Surface mount |
| Industrial Temperature Grade | Up to 85 °C |
| Green Design | Green |
| Program Memory Type | In-system programmable Flash |
Guía de configuración de pines de ATTINY824-SSU 14-pin soic
Configuración de pines para ATTINY824-SSU (encapsulado 14-pin soic). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para ATTINY824-SSU.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
ATTINY824-SSU es adecuado para 6 aplicacións: Industrial Sensor Node, Compact Communication Bridge, Low-Power Actuator Controller, Access Control Peripheral, Portable Measurement Module, LED and Indicator Control.
Industrial Sensor Node
The ATTINY824-SSU fits an industrial sensor node that must acquire local measurements and forward them over a short serial link. Its 20 MHz AVR core provides processing headroom for filtering and status logic, while 8 KB of Flash accommodates application firmware and 1 KB of SRAM supports temporary measurement buffers. I2C can connect a digital sensor, SPI can serve a serial memory or radio device, and UART/USART can provide a diagnostic or uplink path. The 14-pin SOIC package also offers enough pins for sensor control, status LEDs, and an optional actuator output. For industrial deployment, use the exact ATTINY824-SSU temperature grade, provide regulated input power across the 1.8 V to 5.5 V range, and keep communication and sensor traces away from high-current switching nodes.
Recomendado
Compact Communication Bridge
ATTINY824-SSU is appropriate for a small protocol-conversion or sensor-hub bridge because it combines three serial interfaces with 8 KB of program memory. A 20 MHz AVR core can manage simultaneous sensor polling, frame formatting, and host communication, while the hardware multiplier supports common multiply operations in filtering and protocol calculations. The 1 KB SRAM is sufficient for modest packet staging, and 128 bytes of EEPROM can retain calibration or configuration values when the firmware supports nonvolatile updates. Use I2C for short-distance peripheral connections, SPI for faster external devices, and UART/USART for the host link. The main design check is the complete 14-pin assignment: communications, power, reset, clock, and programming pins must all be considered before assigning the remaining GPIO.
Recomendado
Low-Power Actuator Controller
The ATTINY824-SSU can control a compact relay, valve, motor, or actuator subsystem where firmware size and I/O density are more important than high arithmetic throughput. Its 12 I/O pins can support digital inputs, switch status, pulse outputs, and fault signaling, while 8 KB of Flash provides room for state-machine logic, timing, debouncing, and safety checks. PWM-capable timer resources can be useful for motor or valve drive functions when the required peripheral mapping is confirmed in the device documentation. The 1.8 V to 5.5 V operating range supports common embedded supply systems. Designers should calculate driver-transistor dissipation separately from the MCU, include flyback protection for inductive loads, and keep high-current switching paths physically separated from the microcontroller and its serial interfaces.
Recomendado
Access Control Peripheral
ATTINY824-SSU suits an access-control peripheral that coordinates a reader, lock relay, keypad, and status indicator. The 20 MHz core can scan inputs and manage debounce and timing logic, while the 8 KB Flash capacity accommodates protocol and state-machine code. I2C or SPI can interface with an external secure element or reader controller, and UART/USART can support a higher-level controller. The controller can also retain small configuration values in its 128-byte EEPROM. The 14-pin SOIC footprint provides a practical balance between pin count and board area, although every available signal must be allocated carefully when reading a bus, driving a lock, and retaining communications. Validate fail-safe behavior, relay isolation, debounce timing, and power-loss recovery before production deployment.
Recomendado
Portable Measurement Module
The ATTINY824-SSU is useful in a portable measurement module where compactness, low supply voltage, and local control are important. Its 1.8 V minimum operating voltage supports energy-conscious designs, while the 20 MHz core provides enough throughput for sensor configuration and basic signal conditioning. The 8 KB Flash stores firmware and lookup tables, 1 KB of SRAM holds recent samples, and the serial interfaces allow connection to sensors, storage, or a host. The 14-pin SOIC package can be assembled on a compact board while leaving accessible pins for programming and diagnostics. Because battery-powered equipment is sensitive to board leakage, evaluate MCU sleep modes, pull-up values, external sensor current, and regulator quiescent current. Confirm the final low-power behavior with the manufacturer data sheet rather than estimating it from processor speed alone.
Recomendado
LED and Indicator Control
ATTINY824-SSU can implement a centralized LED, status-indicator, or light-control module with programmable patterns and diagnostic behavior. Its 12 GPIO pins provide enough parallel I/O for indicator channels, switches, and shared-bus devices, while timer peripherals can support accurate periodic updates when their pin assignments are confirmed. The 8 KB Flash capacity allows structured firmware for animations, fault states, communication protocols, and configuration, and the 20 MHz core keeps timing overhead low. I2C and SPI can connect an LED driver or digital display controller, while UART/USART can accept commands from a parent system. In a shared-ground design, keep LED current return paths separated from sensitive analog inputs, use appropriate current limiting, and validate thermal conditions around high-brightness continuous channels.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para ATTINY824-SSU — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | ATTINY424-SSU | ATTINY426-SSU | ATTINY827-SSU |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 14-SOIC | 14-SOIC | 14-SOIC | 14-SOIC |
| Product Family | tinyAVR 2 | tinyAVR 2 | tinyAVR 2 | tinyAVR 2 |
| CPU Architecture | 8-bit AVR | 8-bit AVR | 8-bit AVR | 8-bit AVR |
| Maximum CPU Frequency | 20 MHz | 20 MHz | 20 MHz | 20 MHz |
| Flash Memory | 8 KB | 4 KB | 4 KB | 8 KB |
| SRAM | 1 KB | 1 KB | 1 KB | 1 KB |
| EEPROM | 128 bytes | 128 bytes | 128 bytes | 128 bytes |
| Operating Voltage Range | 1.8 V to 5.5 V | 1.8 V to 5.5 V | 1.8 V to 5.5 V | 1.8 V to 5.5 V |
| General-Purpose I/O | 12 pins | 12 pins | 12 pins | 12 pins |
| Serial Interfaces | I2C, SPI, UART/USART | I2C, SPI, UART/USART | I2C, SPI, UART/USART | I2C, SPI, UART/USART |
Diferenciadores clave
- Twice the Flash capacity of the 4 KB family alternatives (frente a ATTINY424-SSU)
- Higher memory ceiling than ATTINY426-SSU (frente a ATTINY426-SSU)
- Same 20 MHz class performance with 1 KB SRAM (frente a ATTINY827-SSU)
Notas de diseño
Assign every 14-pin SOIC signal from the manufacturer pin-description table before PCB routing. In particular, preserve access to programming and reset functions, identify the actual power and ground pins, and avoid assuming that GPIO assignments are interchangeable across every tinyAVR family member. Place the decoupling capacitor close to the supply pins and provide a short, low-impedance ground return from the device to the board ground plane.
Design the supply for the full 1.8 V to 5.5 V operating range of the device and account for GPIO current separately from MCU supply current. Follow the manufacturer recommendations for decoupling, power sequencing, and unused-pin treatment. If the board drives relays, LEDs, or motors, return those currents through a separate power path so switching transients do not disturb the microcontroller or sensitive sensor rails.
Keep I2C, SPI, and UART routing short where possible, especially when the bus capacitance or cable length increases. Use pull resistors only after calculating the effective resistance against the bus capacitance and device sink-current limits. For designs that combine external clocking, radio modules, or switching power converters, keep clock and serial traces away from high-current edges and provide a clean return path beneath the signals where the board stack-up permits.
Do not treat same-package family members as automatic firmware-compatible replacements. ATTINY824-SSU provides 8 KB of Flash, whereas ATTINY424-SSU and ATTINY426-SSU are identified with 4 KB, so the latter require firmware and linker-memory review. Check timer channels, analog functions, alternate pins, interrupt vectors, and bootloader behavior before approving a substitution in production hardware.
Información de cumplimiento
The distributor listing identifies the ATTINY824-SSU as a green device, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was included in the cited manufacturer pages.