PIC16LF1575T-I/JQ - 14KB Flash 32MHz 8-bit MCU | Microchip
N.º de pieza: PIC16LF1575T-I/JQ ✓ Activo| Cant. | Precio unitario | Total |
|---|---|---|
| 1 | $1.32 | $1,32 |
| 10 | $1.19 | $11,90 |
| 100 | $1.07 | $107,00 |
| 500 | $0.96 | $480,00 |
| 1.000 | $0.85 | $850,00 |
| 3.000 | $0.74 | $2.220,00 |
PIC16LF1575T-I/JQ Descripción general
An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory, working RAM, and a set of on-chip peripherals (ADC, timers, communication) on one die. MCUs sit at the lowest tier of the embedded-computing hierarchy: microcontroller -> embedded controller -> semiconductor device. They are designed for deterministic, low-power control tasks in cost-sensitive and space-constrained products, where a full application processor would be wasteful.
Key features include four 16-bit Pulse-Width Modulation (PWM) channels with independent timers, a 10-bit Analog-to-Digital Converter (ADC), a 5-bit Digital-to-Analog Converter (DAC), a Complementary Waveform Generator (CWG), comparators, Peripheral Pin Select (PPS) for flexible signal routing, and an Enhanced Universal Synchronous/Asynchronous Receiver-Transmitter (EUSART) for serial communication. The /JQ suffix designates the 16-pin UQFN package with exposed thermal pad (HVQCCN, 0.65 mm pitch).
The PIC16LF1575 architecture uses a 14-bit instruction word, modified Harvard memory organization with separate program and data buses, and on-chip oscillator calibration. Wide operating voltage (1.8 V to 3.6 V) and nanoWatt XLP deep-sleep modes make the part well-suited to battery-powered designs where quiescent current is critical.
Typical applications include LED lighting, stepper motor control, switched-mode power supplies, battery chargers, and consumer / IoT edge-node designs. The 16-pin footprint suits compact PCB modules where every pin must justify its assignment.
When laying out this device, keep analog and digital ground returns separate and stitch them together at one point under the exposed pad. Decouple VDD with 100 nF and 1 µF ceramic capacitors placed within 2 mm of the supply pins to keep ADC noise low.
This page distills manufacturer datasheet specifications, distributor pricing and stock data, drop-in alternative MPNs, and pragmatic design notes that the raw datasheet alone does not surface.
Alternativas directas para PIC16LF1575T-I/JQ — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con PIC16LF1575T-I/JQ (mismo factor de forma y huella) — difiere en Package, Core Architecture, PWM Channels, ADC, Operating Temperature.
Herramienta de comparación rápida — seleccione piezas alternativas para compararlas lado a lado:
PIC16LF1575-I/JQ
✅ Sustitución directa✓ En stock
$1.04 / unidad
Ver hoja de datos →PIC16LF1574-I/JQ
✅ Sustitución directa✓ En stock
$0.94 / unidad
Ver hoja de datos →PIC16LF1574T-I/SL
✅ Sustitución directa ⚠️ Especificaciones sin verificar✓ En stock
$0.86 / unidad
Ver hoja de datos →PIC16LF1575T-I/SL
✅ Sustitución directa ⚠️ Especificaciones sin verificar✓ En stock
$0.88 / unidad
Ver hoja de datos →PIC16LF15325-I/JQ
✅ Sustitución directa✓ En stock
$0.99 / unidad
Ver hoja de datos →PIC16LF15324-I/JQ
✅ Sustitución directa✓ En stock
$0.81 / unidad
Ver hoja de datos →PIC16LF1575T-I/JQ Valores máximos y características eléctricas
| Architecture | PIC16 enhanced mid-range 8-bit core (14-bit instruction word) |
| CPU Family | PIC® 16F |
| Maximum CPU Frequency | 32 MHz |
| Program Memory (Flash) | 14 KB (8K x 14 words) |
| SRAM | 1 KB |
| Encapsulado | 16-UQFN (4 mm x 4 mm) with exposed pad |
| Package Code (per data) | HVQCCN, 0.65 mm pitch, 16 terminals |
| Operating Voltage Range | 1.8 V to 3.6 V |
| ADC | 10-bit |
| DAC | 5-bit |
| PWM Channels | 4 x 16-bit with independent timers |
| Comparator | Yes (on-chip) |
| Complementary Waveform Generator (CWG) | Yes |
| Peripheral Pin Select (PPS) | Yes |
| Communication | EUSART (Enhanced USART) |
| Estado RoHS | Compliant (per Verified Electronics listing) |
| Shipping Form (suffix T) | Tape & Reel |
Configuración de pines de PIC16LF1575T-I/JQ
| Pin 1 | VDD — Positive supply (1.8 V to 3.6 V) |
| Pin 2 | RA5 — Bidirectional IO / analog input / PPS-mappable |
| Pin 3 | RA4 — Bidirectional IO / analog input / PPS-mappable |
| Pin 4 | RA3 — Bidirectional IO / MCLR input when configured |
| Pin 5 | RC5 — Bidirectional IO / PWM / comparator input |
| Pin 6 | RC4 — Bidirectional IO / PWM / EUSART |
| Pin 7 | RC3 — Bidirectional IO / PWM / EUSART |
| Pin 8 | RC2 — Bidirectional IO / PWM |
| Pin 9 | RC1 — Bidirectional IO / PWM / comparator output |
| Pin 10 | RC0 — Bidirectional IO / ICSP clock |
| Pin 11 | RA2 — Bidirectional IO / analog / DAC output |
| Pin 12 | RA1 — Bidirectional IO / ICSPDAT / analog |
| Pin 13 | RA0 — Bidirectional IO / analog |
| Pin 14 | VSS — Ground return |
| Pin 15 | RB7 — Bidirectional IO / analog / PWM |
| Pin 16 | RB6 — Bidirectional IO / analog / PWM |
| Pin 17 | EP — Exposed pad - must be soldered to PCB ground for thermal dissipation |
Aplicaciones típicas
PIC16LF1575T-I/JQ es adecuado para 7 aplicacións: LED Lighting & RGBW Color Mixing, Stepper Motor Control, Battery Chargers (Li-ion / NiMH), Switched-Mode Power Supplies (SMPS) Digital Control, Consumer / IoT Edge Nodes, Industrial Sensor Conditioning, Hobby / Maker Indicator & Driver Boards.
LED Lighting & RGBW Color Mixing
The PIC16LF1575T-I/JQ drives LED strings with four on-chip 16-bit PWM channels, each with an independent timer. Resolution of 16 bits gives ~0.0015% duty-cycle granularity, which keeps dimming curves smooth down to the lowest visible brightness - critical for theater-grade RGBW color mixing where 8-bit PWM produces visible stair-step flicker. The chip runs at 32 MHz and 1.8-3.6 V, so it can be powered directly from a single Li-ion cell with no level shifting. The on-chip CWG and 5-bit DAC complement the PWMs for warm-white/color-temperature blending. Source: PIC16(L)F1574/1575 datasheet and Microchip LED lighting reference designs.
Recomendado
Stepper Motor Control
Four 16-bit PWMs with independent timers let the PIC16LF1575T-I/JQ synthesize the two-phase quadrature drive required for bipolar stepper motors without CPU overhead. The 32 MHz core handles trapezoidal acceleration curves and microstepping tables in firmware, while Peripheral Pin Select (PPS) reroutes each PWM to whichever pins the chosen stepper driver accepts. The 5-bit on-chip DAC plus comparator enable closed-loop current sensing on the low-side shunt. Operating from 1.8-3.6 V aligns with battery-driven robotics. Source: PIC16(L)F1575 datasheet PWM/CWG sections.
Recomendado
Battery Chargers (Li-ion / NiMH)
For low-cost CC/CV (constant-current / constant-voltage) chargers, the PIC16LF1575T-I/JQ samples the battery voltage with its 10-bit ADC and adjusts the charger current with a 16-bit PWM. The 5-bit DAC and comparators provide hardware-controlled charge-termination sensing, removing ADC latency from the safety loop. Wide 1.8-3.6 V operating range covers single-cell Li-ion chemistries directly. nanoWatt XLP sleep modes, typically sub-1 µA, are vital when the charger sits idle on the shelf. Source: Microchip AN2159 and PIC16LF1575 datasheet power-management sections.
Recomendado
Switched-Mode Power Supplies (SMPS) Digital Control
The PIC16LF1575T-I/JQ is well-suited to small DSP-free digital SMPS control. Its high-resolution PWM, paired with the Complementary Waveform Generator, yields the leading-edge / trailing-edge modulation needed for synchronous buck, boost, and half-bridge topologies. ADC feedback closes the voltage-mode loop, while the on-chip comparators enable cycle-by-cycle current-mode protection. PPS reassigns fault signals across pins to keep the analog/digital ground split intact. Source: Microchip AN1974 and PIC16LF1575 datasheet CWG section.
Recomendado
Consumer / IoT Edge Nodes
For IoT nodes that wake briefly to sense and transmit, the PIC16LF1575T-I/JQ offers sub-1 µA deep-sleep (nanoWatt XLP), 1.8-3.6 V supply, EUSART for sensor or sub-GHz radio links, and 14 KB Flash for small over-the-air firmware. PPS helps when the radio module dictates pin assignment. The 4x4 UQFN keeps the bill-of-materials small enough for coin-cell-powered devices like door sensors and plant moisture probes. Source: PIC16LF1575 datasheet low-power section and Microchip low-power application notes.
Recomendado
Industrial Sensor Conditioning
The PIC16LF1575T-I/JQ's 10-bit ADC plus on-chip comparator and 5-bit DAC lets designers implement analog front-end conditioning for low-cost industrial sensors: thermocouple cold-junction compensation, 4-20 mA loop sense scaling, and PWM-set DAC biasing. The EUSART serves RS-232 / RS-485 links through a transceiver; PPS reorders pin assignments without re-spinning the PCB. -40 to +85 °C industrial grade covers most sensor-hub environments. Source: PIC16LF1575 datasheet ADC section and Microchip sensor conditioning notes.
Recomendado
Hobby / Maker Indicator & Driver Boards
For low-cost, hand-built boards, the PIC16LF1575T-I/JQ's PIC16 core is unusually well-supported in MPLAB X and the free XC8 compiler. The 16-UQFN is small, but the exposed pad allows good thermal dissipation without a heatsink. Hobby uses include WS2812 / NeoPixel driving, servo multiplexing, and small robotics controllers where every pin must do useful work thanks to PPS. Source: Microchip MPLAB-X ecosystem and PIC16LF1575 datasheet family introduction.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para PIC16LF1575T-I/JQ — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | PIC16LF1575-I/JQ | PIC16LF1574-I/JQ | PIC16LF15325-I/JQ |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 16-UQFN (4 mm x 4 mm) | 16-UQFN (4 mm x 4 mm) - same | 16-UQFN (4 mm x 4 mm) - same | 16-UQFN (4 mm x 4 mm) - same |
| PWM Channels | 4 x 16-bit | 4 x 16-bit | 2 x 16-bit (-50%) | 4 x 10-bit (lower resolution) |
Diferenciadores clave
- Highest on-chip PWM resolution in its package class (frente a PIC16LF1574-I/JQ)
- Drop-in higher-memory upgrade path exists (frente a PIC16LF1574T-I/SL)
- Active lifecycle with multi-channel inventory (frente a PIC16LF1575-I/ST)
Notas de diseño
Solder the exposed thermal pad (EP) of the 16-UQFN to a continuous PCB ground copper pour with at least eight thermal-via stitches to the inner ground plane. A missing soldered EP can raise junction-to-ambient thermal resistance by 3-5x and cause unexpected thermal shutdown at modest loads.
Place one 100 nF and one 1 µF X7R ceramic bypass capacitor within 2 mm of the VDD pin. The PIC16LF1575 ADC requires very low supply ripple; routed impedance above ~50 milliohms between the capacitor and the VDD pin couples MCU noise into ADC readings. Keep digital return currents separate from analog return traces.
The PIC16LF1575's EUSART can deliver RS-232 levels directly only at very low data rates; for full-rate operation use an external transceiver like MCP2221 (USB) or a classic MAX232/MAX3232 (RS-232). AC-coupling and proper signal-guard spacing prevent SI issues on the PCB edge.
Información de cumplimiento
RoHS confirmed per Verified Electronics listing and DigiKey. Reach, halogen-free, and conflict-minerals status not stated in the Verified Web Data - confirm via Microchip material declaration if required.
