PIC18F6621-E/PT - 8-Bit 25MHz 64KB Flash MCU 64-TQFP | Microchip
N.º de pieza: PIC18F6621-E/PT ✓ Activo| Cant. | Precio unitario | Total |
|---|---|---|
| 1 | $11.85 | $11,85 |
| 10 | $10.66 | $106,60 |
| 100 | $9.48 | $948,00 |
| 500 | $8.3 | $4.150,00 |
| 1.000 | $7.12 | $7.120,00 |
PIC18F6621-E/PT Descripción general
A PIC18 microcontroller is an 8-bit Harvard-architecture MCU from Microchip's PIC (Peripheral Interface Controller) family. Within the broader taxonomy, PIC18 sits above PIC10/12/16 baseline devices and below 16-bit dsPIC and 32-bit PIC32 families, offering a balance of cost, performance, and code density. The PIC18F6621 belongs to the 64/80-pin high-performance sub-family that targets human-machine interface (HMI), automotive, and industrial control applications requiring large memory and many I/Os.
Key features include 64KB enhanced Flash with self-programmability, 3.8KB RAM, 1KB EEPROM, an internal 8 MHz RC oscillator (with PLL up to 40 MHz), 12-bit A/D converter (8 channels), two USART modules, MSSP (SPI/I2C), and capture/compare/PWM modules. The 64-pin TQFP package has a 10x10 mm body with 0.5 mm pitch, supporting surface-mount assembly on standard PCB processes. The device is engineered for demanding embedded systems that need robust 5V power supply tolerance and reliable operation across -40C to +125C.
Typical applications include industrial control panels, automotive body and instrument cluster modules, white goods and appliance controllers, medical device user interfaces, and HMI touch-screen boards. The extended memory and rich peripheral set also suit point-of-sale terminals and small graphical-display controllers.
When designing, ensure the 5V supply is well decoupled with 100 nF ceramic plus bulk capacitance placed close to VDD/AVDD/VSS pins. Program/debug is done via ICSP using the PGC/PGD pins - reserve these on the schematic for in-circuit programming access. The internal oscillator with PLL should be used only after verifying peripheral timing margin across the full temperature range.
Alternativas directas para PIC18F6621-E/PT — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con PIC18F6621-E/PT (mismo factor de forma y huella) — difiere en Timers, Package, Core Architecture, Operating Temperature, MSL Level.
Herramienta de comparación rápida — seleccione piezas alternativas para compararlas lado a lado:
PIC18F6621-I/PT
✅ Sustitución directa✓ En stock
$8.15 / unidad
Ver hoja de datos →PIC18F6621T-I/PT
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
PIC18F6620T-I/PT
✅ Sustitución directa✓ En stock
$4.18 / unidad
Ver hoja de datos →PIC18F6722-I/PT
✅ Sustitución directa✓ En stock
$5.32 / unidad
Ver hoja de datos →PIC18F6622-I/PT
✅ Sustitución directa✓ En stock
$5.62 / unidad
Ver hoja de datos →PIC18F6525T-I/PT
✅ Sustitución directa✓ En stock
$7.4 / unidad
Ver hoja de datos →PIC18F6621-E/PT Valores máximos y características eléctricas
| Core Architecture | PIC18, 8-bit RISC, Harvard |
| Frecuencia de reloj máxima | 40 MHz (25 MHz per DigiKey listing) |
| Program Memory Type | Flash (enhanced, self-programmable) |
| Program Memory Size | 64 KB (32K x 16) |
| RAM Size | 3.8 KB |
| EEPROM Size | 1 KB |
| I/O Pins | 54 |
| Supply Voltage (VDD) | 4.2 V to 5.5 V |
| Rango de temperatura de funcionamiento | -40 C to +125 C (extended "E" grade) |
| A/D Converter | 12-bit, 8 channels |
| Communication Interfaces | 2x USART, MSSP (SPI/I2C) |
| Timers | Multiple 8/16-bit timers with CCP modules |
| Package Type | TQFP-64 (10x10 mm, 0.5 mm pitch) |
| Tipo de montaje | Surface Mount |
| Estado RoHS | Compliant |
| Lead-Free | Yes |
| ICSP Programming | Yes (PGC/PGD/PGM pins) |
Configuración de pines de PIC18F6621-E/PT
| Pin 1 | MCLR/RE3 — Master Clear / digital I/O (input only on RE3) |
| Pin 2 | RA0/AN0 — PORTA bit 0 / analog input 0 |
| Pin 3 | RA1/AN1 — PORTA bit 1 / analog input 1 |
| Pin 4 | RA2/AN2/VREF- — PORTA bit 2 / analog input 2 / ADC VREF- |
| Pin 5 | RA3/AN3/VREF+ — PORTA bit 3 / analog input 3 / ADC VREF+ |
| Pin 6 | RA4/T0CKI — PORTA bit 4 / Timer0 clock input |
| Pin 7 | RA5/AN4/SS — PORTA bit 5 / analog input 4 / SPI slave select |
| Pin 8 | RB0/INT0 — PORTB bit 0 / external interrupt 0 |
| Pin 9 | RB1/INT1 — PORTB bit 1 / external interrupt 1 |
| Pin 10 | RB2/INT2 — PORTB bit 2 / external interrupt 2 |
| Pin 11 | VDD — Positive supply voltage |
| Pin 12 | VSS — Ground reference |
| Pin 13 | OSC1/CLKI — Oscillator crystal input / external clock in |
| Pin 14 | OSC2/CLKO — Oscillator crystal output / clock out |
| Pin 15 | RC0/T1OSO/T1CKI — PORTC bit 0 / Timer1 oscillator output / Timer1 clock input |
| Pin 16 | RC1/T1OSI/CCP2 — PORTC bit 1 / Timer1 oscillator input / CCP2 |
| Pin 17 | RC2/CCP1 — PORTC bit 2 / CCP1 |
| Pin 18 | RC3/SCK/SCL — PORTC bit 3 / SPI clock / I2C clock |
| Pin 19 | RD0/PSP0 — PORTD bit 0 / parallel slave port bit 0 |
| Pin 20 | RD1/PSP1 — PORTD bit 1 / parallel slave port bit 1 |
| Pin 21 | RD2/PSP2 — PORTD bit 2 / parallel slave port bit 2 |
| Pin 22 | RD3/PSP3 — PORTD bit 3 / parallel slave port bit 3 |
| Pin 23 | RC4/SDI/SDA — PORTC bit 4 / SPI data in / I2C data |
| Pin 24 | RC5/SDO — PORTC bit 5 / SPI data out |
| Pin 25 | RC6/TX1/CK1 — PORTC bit 6 / USART1 TX / USART1 clock |
| Pin 26 | RC7/RX1/DT1 — PORTC bit 7 / USART1 RX / USART1 data |
| Pin 27 | PGC — ICSP programming clock |
| Pin 28 | PGD — ICSP programming data |
| Pin 29 | AVDD — Analog positive supply |
| Pin 30 | AVSS — Analog ground |
| Pin 31 | VSS — Ground reference |
| Pin 32 | VDD — Positive supply voltage |
| Pin 33 | RB3/CCP2 — PORTB bit 3 / CCP2 alternate |
| Pin 34 | RB4 — PORTB bit 4 |
| Pin 35 | RB5/PGM — PORTB bit 5 / low-voltage ICSP enable |
| Pin 36 | RB6/PGC — PORTB bit 6 / alternate ICSP clock |
| Pin 37 | RB7/PGD — PORTB bit 7 / alternate ICSP data |
| Pin 38 | RD4/PSP4 — PORTD bit 4 / parallel slave port bit 4 |
| Pin 39 | RD5/PSP5 — PORTD bit 5 / parallel slave port bit 5 |
| Pin 40 | RD6/PSP6 — PORTD bit 6 / parallel slave port bit 6 |
| Pin 41 | RD7/PSP7 — PORTD bit 7 / parallel slave port bit 7 |
| Pin 42 | RE0/RD — PORTE bit 0 / parallel slave port read |
| Pin 43 | RE1/WR — PORTE bit 1 / parallel slave port write |
| Pin 44 | RE2/CS — PORTE bit 2 / parallel slave port chip select |
| Pin 45 | RF0 — PORTF bit 0 |
| Pin 46 | RF1/AN6/C2OUT — PORTF bit 1 / analog input 6 / comparator 2 output |
| Pin 47 | RF2/AN7/C1OUT — PORTF bit 2 / analog input 7 / comparator 1 output |
| Pin 48 | RF3/AN8 — PORTF bit 3 / analog input 8 |
| Pin 49 | RF4/AN9 — PORTF bit 4 / analog input 9 |
| Pin 50 | RF5/AN10/CVREF — PORTF bit 5 / analog input 10 / comparator VREF |
| Pin 51 | RF6/AN11 — PORTF bit 6 / analog input 11 |
| Pin 52 | RF7 — PORTF bit 7 |
| Pin 53 | RG0 — PORTG bit 0 |
| Pin 54 | RG1 — PORTG bit 1 |
| Pin 55 | RG2 — PORTG bit 2 |
| Pin 56 | RG3 — PORTG bit 3 |
| Pin 57 | RG4 — PORTG bit 4 |
| Pin 58 | RG5 — PORTG bit 5 |
| Pin 59 | RA6 — PORTA bit 6 |
| Pin 60 | RA7 — PORTA bit 7 |
| Pin 61 | RC8 — PORTC bit 8 / enhanced CCP |
| Pin 62 | RC9 — PORTC bit 9 / enhanced CCP |
| Pin 63 | RC10 — PORTC bit 10 |
| Pin 64 | RC11 — PORTC bit 11 |
Aplicaciones típicas
PIC18F6621-E/PT es adecuado para 6 aplicacións: Industrial Control Panels, Automotive Body and Instrument Modules, White Goods and Appliance Controllers, Medical Device User Interfaces, Human-Machine Interface (HMI) Touch Panels, Point-of-Sale Terminals.
Industrial Control Panels
The PIC18F6621-E/PT suits industrial control panel applications because of its 54 I/O pins for keypads, LED indicators, and relay drivers, 64 KB Flash for ladder-logic and Modbus stacks, and extended -40C to +125C temperature grade for unconditioned factory-floor enclosures. Its 4.2-5.5V supply tolerance accepts noisy 24V-to-5V back-converter rails typical of PLC cabinets. The dual USART interfaces enable simultaneous RS-485 master and HMI display link. Compared to 3.3V-only PIC18F67J11, the 5V-native operation eliminates an LDO and reduces BOM cost.
Recomendado
Automotive Body and Instrument Modules
The PIC18F6621-E/PT is appropriate for automotive body controllers and instrument cluster modules because of its -40C to +125C extended temperature grade covering under-hood and cabin extremes, plus 5V native supply compatible with 12V battery rails after regulation. The 12-bit ADC handles sensor inputs (temperature, fuel level, position), and the PWM modules drive motor and lighting loads. For instrument clusters, the 64 KB Flash stores graphics tables and CAN/LIN protocol stacks. The TQFP-64 package is automotive-vibration tolerant when properly PCB-anchored.
Recomendado
White Goods and Appliance Controllers
The PIC18F6621-E/PT is well suited to white goods controllers (washing machines, dishwashers, refrigerators) because of its 5V tolerance, large I/O count for motor TRIAC drivers and user-interface key/LED matrices, and extended temperature range covering hot appliance interiors. The 64 KB Flash comfortably holds motor-control state machines and user-menu logic; the 3.8 KB RAM supports real-time display buffers. Compared to baseline PIC16F parts, the PIC18's 32 MIPS throughput simplifies sensor-fusion math for inverter compressor control.
Recomendado
Medical Device User Interfaces
The PIC18F6621-E/PT supports medical device user-interface boards (infusion pump keypads, blood-pressure monitor displays, diagnostic readout panels) because of its deterministic 8-bit architecture, 64 KB Flash for IEC-62304 class B firmware, and extended temperature range for clinical environments. The 12-bit ADC reads sensor inputs with adequate resolution for trend monitoring. Note that full medical certification requires additional IEC-60601-1 system-level work beyond component choice. The 5V-tolerant I/O eases connection to legacy medical-rail peripherals.
Recomendado
Human-Machine Interface (HMI) Touch Panels
The PIC18F6621-E/PT handles HMI touch-panel controller boards because of its 54 I/O count (driving segmented LCDs, key matrices, and UART-to-host), 64 KB Flash for menu logic, and dual USART for host-plus-debug channels. The 12-bit ADC reads resistive touch coordinates directly. Compared to PIC16F alternatives, the PIC18 instruction set accelerates GUI state-machine execution by ~3x. The TQFP-64 (10x10 mm) package fits behind mid-size (3-5 inch) display panels with adequate copper for thermal dissipation.
Recomendado
Point-of-Sale Terminals
The PIC18F6621-E/PT is appropriate for point-of-sale (POS) terminal sub-controllers because of its dual USART (one for receipt printer, one for card reader), 64 KB Flash for transaction-log buffering, and reliable extended-temperature operation in retail environments. The I2C MSSP talks to EEPROM for transaction history. Compared to 3.3V-only PIC18F parts, the 5V operation interfaces directly with legacy 5V printer logic without level shifters. The TQFP-64 footprint is standard enough for easy PCB rework on field-deployed terminals.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para PIC18F6621-E/PT — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | PIC18F6621-I/PT | PIC18F6621T-I/PT | PIC18F6620T-I/PT | PIC18F6722-I/PT | PIC18F6622-I/PT | PIC18F6525T-I/PT |
|---|---|---|---|---|---|---|---|
| Package | TQFP-64 (10x10 mm) | TQFP-64 (10x10 mm) - same | TQFP-64 (10x10 mm) - same | TQFP-64 (10x10 mm) - same | TQFP-64 (10x10 mm) - same | TQFP-64 (10x10 mm) - same | TQFP-64 (10x10 mm) - same |
| Brand | Microchip Technology | Microchip Technology - same | Microchip Technology - same | Microchip Technology - same | Microchip Technology - same | Microchip Technology - same | Microchip Technology - same |
| Flash Memory | 64 KB | 64 KB - same | 64 KB - same | 32 KB (-50%) | 128 KB (+100%) | 128 KB (+100%) | 48 KB (-25%) |
| RAM | 3.8 KB | 3.8 KB - same | 3.8 KB - same | 2 KB (-47%) | 3.8 KB - same | 3.8 KB - same | 3.8 KB - same |
| EEPROM | 1 KB | 1 KB - same | 1 KB - same | 1 KB - same | 1 KB - same | 1 KB - same | 1 KB - same |
| Max Clock Speed | 40 MHz | 40 MHz - same | 40 MHz - same | 40 MHz - same | 40 MHz - same | 40 MHz - same | 40 MHz - same |
| Supply Voltage | 4.2 V to 5.5 V | 4.2 V to 5.5 V - same | 4.2 V to 5.5 V - same | 4.2 V to 5.5 V - same | 4.2 V to 5.5 V - same | 4.2 V to 5.5 V - same | 4.2 V to 5.5 V - same |
| Temperature Grade | -40C to +125C (E) | -40C to +85C (I) | -40C to +85C (I) | -40C to +85C (I) | -40C to +85C (I) | -40C to +85C (I) | -40C to +85C (I) |
Diferenciadores clave
- Extended temperature grade -40C to +125C (frente a PIC18F6621-I/PT)
- 5V-native operation (frente a PIC18F67J11-I/PT)
- 54 I/O pins in TQFP-64 (frente a PIC18F6620T-I/PT)
Notas de diseño
Place a 100 nF ceramic decoupling capacitor within 5 mm of every VDD/VSS pin pair (pins 11/12 and 31/32). Add a 10 uF bulk tantalum or ceramic at the board supply entry. AVDD (pin 29) requires its own 100 nF decoupling close to the pin plus a ferrite bead or 10 ohm resistor to VDD to isolate analog from digital switching noise. Brown-out reset is enabled in configuration bits to ensure clean power-up; verify the BOR voltage threshold matches your supply tolerance.
Reserve the ICSP pins (PGC pin 27, PGD pin 28, MCLR pin 1, VDD, VSS) on a 5-pin 0.1-inch header or test pad for in-circuit programming access. The TQFP-64 (10x10 mm, 0.5 mm pitch) requires IPC-7351 nominal land patterns with 0.30 mm pad width and 0.20 mm pad-to-pad gap; ENIG surface finish is recommended over HASL for fine-pitch reliability. For automotive and high-vibration environments, use underfilled or corner-glued TQFP-64 packages per IPC-9701 standards.
Do not leave MCLR floating - it requires a 10 kohm pull-up to VDD. The PGM pin (RB5) must be pulled low or left NC for normal operation; only pull high to enable low-voltage ICSP. The internal 8 MHz RC oscillator with PLL gives 32 MHz (8 MIPS) but accuracy is only +/-2% - use an external crystal for CAN, USB, or Ethernet timing. Configuration bits must be set correctly to enable the watchdog timer, BOR, and oscillator mode or the MCU will fail to start.
Route the oscillator traces (OSC1/OSC2, pins 13/14) short and symmetric, guard-traced with ground, and keep them away from switching I/O and ADC inputs. The analog inputs AN0-AN11 share pins with digital I/O - if used as analog, the corresponding TRIS bit must be set to input. Place a 100 nF + 10 uF decoupling pair at AVSS/AVDD and route analog traces perpendicular to digital switching lines to minimize crosstalk.
Información de cumplimiento
RoHS compliant per DigiKey verified listing 2026-09-28. AEC-Q100 marked not_applicable - the -E grade temperature range (-40C to +125C) is automotive-compatible but Microchip does not certify PIC18F6621 as AEC-Q100 qualified at the component level. Check Microchip product page for any auto-qualified -Q1 variants.
