Microchip Technology

PIC24FJ32MC101-I/SS - 16-Bit 16 MIPS Motor Control MCU

N.º de pieza: PIC24FJ32MC101-I/SS ✓ Activo
3.0 V to 3.6 V Vdss 20-pin SSOP Package 32 MHz Speed 32 KB (11K x 24 words) Memory
MOQ: 1 |

PIC24FJ32MC101-I/SS Descripción general

The Microchip Technology PIC24FJ32MC101-I/SS is a 16-bit motor-control microcontroller with 16 MIPS performance, 32 KB of Flash memory, 2 KB of SRAM, and a 20-pin SSOP package. It operates from a 3.0 V to 3.6 V supply and is built around the PIC24F 16-bit CPU, with two 40-bit accumulators, single-cycle multiply-accumulate capability, hardware divide support, and 32-bit multiplication.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. Within the embedded-control hierarchy, the PIC24FJ32MC101 belongs to the 16-bit microcontroller class and combines general-purpose embedded processing with dedicated motor-control resources. Its compact SSOP-20 format is useful when motor-control functionality must fit into space-constrained industrial, appliance, and embedded-control products.

The device provides three MCPWM channels, CTMU, peripheral pin select, and a real-time clock and calendar. These resources allow timer-based switching, fault detection, analog measurement, and precise peripheral routing without requiring a separate timing controller. The 16 MIPS execution rate provides useful processing headroom for closed-loop motor algorithms, sensor filtering, communication handling, and supervisory logic. The manufacturer describes the family as an ultra-low-cost, high-performance 16-bit motor-control platform with small-footprint options.

The PIC24F core uses 16-bit registers and a code-efficient instruction set optimized for compiled C and assembly. Program memory is organized as 11K by 24 words, while the device provides 2 KB of SRAM for working data. Its operating specification covers 3.0 V to 3.6 V and an industrial temperature range of -40°C to +125°C for the specified grade, supporting use across demanding embedded environments.

Typical applications include brushless DC motor controllers, two-phase and three-phase induction-motor drives, compact power converters, appliance motor controls, pump controllers, and industrial automation modules. The MCPWM peripherals are especially valuable in variable-speed drives, while CTMU supports capacitive sensing and precision analog measurement tasks.

PCB implementation requires close attention to the 20-pin SSOP footprint, 3.3 V power distribution, decoupling, programming access, and motor-power isolation. Place input and output capacitors near their associated pins, route high-current switching paths away from sensitive control traces, and use the datasheet pin-description table when assigning alternate peripheral functions.

This page combines the manufacturer device specifications with practical motor-control design guidance, application selection criteria, verified drop-in alternatives, and a parameter-by-parameter comparison. These engineering details help developers evaluate the PIC24FJ32MC101-I/SS beyond a basic catalog listing before beginning firmware and PCB development.

Alternativas directas para PIC24FJ32MC101-I/SS — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con PIC24FJ32MC101-I/SS (mismo factor de forma y huella) — difiere en Package, Operating Temperature, CPU Architecture, Operating Voltage, Peripheral Pin Select.

Microchip Technology
Package: 20-pin SSOP (SS) 5.30 mm body
Operating Temperature: -40C to +85C (Industrial)
Operating Voltage: 3.0 V to 5.5 V
Microchip Technology
Operating Temperature: -40 °C to +125 °C
CPU Architecture: 16-bit PIC24F
Peripheral Pin Select: PPS supported
Microchip Technology
Package: 28-SSOP (0.209 inch / 5.30 mm body width)

PIC24FJ32MC101-E/SS

✅ Sustitución directa ⚠️ Especificaciones sin verificar
Microchip Technology
📦 20-pin SSOP
16-bit motor-control microcontroller · 16-bit PIC24F · 16 MIPS · 32 KB Flash (11K × 24 bits) · 2 KB SRAM · 3 V to 3.6 V · 10 bits · Integrated MCPWM peripherals

Consulte el precio

Ver hoja de datos →

PIC24FJ32MC101-H/SS

✅ Sustitución directa
📦 20-pin SSOP
Temperature grade changes from I to H while retaining the same 20-pin SSOP footprint, 32 KB Flash, 2 KB SRAM, and three MCPWM channels.

📋 Alternativa de referencia (no en el catálogo)

PIC24FJ32MC101-I/SS Valores máximos y características eléctricas

Product Type 16-bit Flash microcontroller
CPU Architecture PIC24F 16-bit core
Maximum Instruction Rate 16 MIPS
Maximum CPU Frequency 32 MHz
Flash Memory 32 KB (11K x 24 words)
SRAM 2 KB
Operating Voltage 3.0 V to 3.6 V
Tensión de alimentación 3.3 V
Temperatura de funcionamiento -40°C to +125°C
Motor-Control PWM Channels 3 MCPWM channels
Analog Peripheral CTMU
Peripheral Pin Select Supported
Real-Time Clock and Calendar RTCC
Programmable Oscillator 16 MHz
Encapsulado 20-pin SSOP
Package Body Width 5.30 mm
Tipo de montaje Surface Mount

Configuración de pines de PIC24FJ32MC101-I/SS

SSOP-20 Package Pinout Diagram SSOP-20 3.9x7.3mm, P0.635mm, JEDEC MO-150. 1 20 2 19 3 18 4 17 5 16 6 15 7 14 8 13 9 12 10 11 SSOP-20
Pin 1 MCLR/VPP — Program mode and reset input; programming voltage input
Pin 2 RA0/AN0/ULPWU/C1IN+ — Digital input and output, analog input, ultra-low-power wake-up, and CTMU comparator input
Pin 3 RA1/AN1/ULPWU/C1IN- — Digital input and output, analog input, ultra-low-power wake-up, and CTMU comparator input
Pin 4 RA2/AN2/ULPWU/C2IN+ — Digital input and output, analog input, ultra-low-power wake-up, and CTMU comparator input
Pin 5 RA3/AN3/C1IN- — Digital input and output, analog input, and CTMU comparator input
Pin 6 RA4/T1OSC/C1OUT — Digital input and output, Timer 1 oscillator input, and CTMU comparator output
Pin 7 RA5/AN4/T1CLKI/OC1 — Digital input and output, analog input, Timer 1 clock input, and output compare
Pin 8 VSS — Ground reference
Pin 9 RA6/AN5/OC2 — Digital input and output, analog input, and output compare
Pin 10 RA7/AN6 — Digital input and output and analog input
Pin 11 VDD — Positive supply voltage
Pin 12 RA8/AN7/C2IN- — Digital input and output, analog input, and CTMU comparator input
Pin 13 RA9/AN8 — Digital input and output and analog input
Pin 14 RA10/AN9/C3IN+ — Digital input and output, analog input, and CTMU comparator input
Pin 15 VSS — Ground reference
Pin 16 OSC1/CLKI — Oscillator crystal or clock input
Pin 17 OSC2/CLKO — Oscillator crystal or clock output
Pin 18 RA11/AN10/C3IN- — Digital input and output, analog input, and CTMU comparator input
Pin 19 RA12/AN11 — Digital input and output and analog input
Pin 20 RA13/AN12 — Digital input and output and analog input

Aplicaciones típicas

PIC24FJ32MC101-I/SS es adecuado para 6 aplicacións: Brushless DC Motor Controller, Industrial Pump Controller, Household Appliance Motor Control, Capacitive Sensor Interface, Compact Power Converter Controller, Timing and Real-Time Clock Module.

🏭

Brushless DC Motor Controller

The PIC24FJ32MC101-I/SS fits compact brushless DC motor controls because its three MCPWM channels can generate the switching signals required by a three-phase inverter. The 16 MIPS PIC24F core leaves processing capacity for commutation timing, current sampling, speed control, and fault handling. Its 32 KB of Flash accommodates motor-control firmware and parameter tables, while 2 KB of SRAM supports control state and diagnostics. Running from 3.0 V to 3.6 V also supports integration with a 3.3 V control architecture. The principal design consideration is separating high-current switching paths from sensitive control and sensing traces.

⚡

Industrial Pump Controller

The PIC24FJ32MC101-I/SS is suitable for small industrial pump and circulation-system controllers where accurate timing, closed-loop regulation, and compact packaging are important. Its MCPWM channels can drive an inverter or chopper stage, while the 16 MIPS core can execute PID control, sensor filtering, and pump-state logic. The 2 KB SRAM is sufficient for short control loops and operating parameters, and the 32 KB Flash provides room for calibration data and diagnostics. The -40°C to +125°C operating range supports demanding industrial environments when the motor driver, protection network, and thermal design are independently validated.

🏠

Household Appliance Motor Control

The PIC24FJ32MC101-I/SS supports cost-sensitive appliance designs that combine motor regulation with capacitive sensing or analog measurement. The CTMU can support touch controls and related measurement functions, while the three MCPWM channels handle efficient motor excitation in a small PCB area. At 20 pins, the SSOP package reduces routing space compared with larger motor-control MCUs, and 16 MIPS provides adequate control-loop performance. Designers should use the dedicated motor-driver interface, maintain short feedback routes, and validate conducted and radiated emissions because the compact switching stage can couple noise into control signals.

🧩

Capacitive Sensor Interface

The PIC24FJ32MC101-I/SS can act as the control MCU in a capacitive-sensing system because CTMU provides a dedicated measurement peripheral. It is appropriate for appliance interfaces, industrial touch controls, and equipment requiring both sensing and motor supervision in one device. The 16 MIPS core can manage timing, filtering, debouncing, and communication while leaving motor-control functions available through MCPWM. Keep CTMU sensor traces away from switching nodes and provide a clean ground reference, since high dv/dt from an inverter can corrupt charge-transfer measurements. Firmware should also validate sensor timing and noise rejection during worst-case motor operation.

⚡

Compact Power Converter Controller

The PIC24FJ32MC101-I/SS can control a compact switching power converter because its MCPWM channels, 16 MIPS processing rate, and 2 KB SRAM support feedback-loop calculation and timing functions. The 3.0 V to 3.6 V operating range aligns with common 3.3 V control rails. Its 32 KB Flash capacity is useful for compensation settings, protection logic, and communication routines. For a reliable implementation, use the PWM outputs to drive power switches through suitable gate drivers, keep high-current paths away from the MCU, and include cycle-by-cycle overcurrent and undervoltage protection in hardware rather than relying solely on firmware.

🖥️

Timing and Real-Time Clock Module

The PIC24FJ32MC101-I/SS can serve as a compact timing controller because it combines the RTCC with the peripheral pin select function and a 16 MIPS core. This makes it useful for equipment that needs calendar, interval, or scheduled-event handling alongside motor or actuator supervision. The RTCC provides a dedicated real-time function without requiring another device, and PPS can distribute a precise periodic reference to related circuitry. Validate timer accuracy against the selected oscillator and load, protect the oscillator network from nearby switching stages, and specify a backup strategy if the product must retain time across a complete power interruption.

What are the key specifications of PIC24FJ32MC101-I/SS that engineers should know?
The PIC24FJ32MC101-I/SS is a 16-bit PIC24F motor-control MCU rated at 16 MIPS, with 32 KB of Flash, 2 KB of SRAM, and a 20-pin SSOP package. According to the Microchip Technology PIC24FJ16MC101/102 and PIC24FJ32MC101/102/104 data sheet, it provides three MCPWM channels, CTMU, peripheral pin select, and an RTCC while operating from 3.0 V to 3.6 V.
What is the operating voltage of PIC24FJ32MC101-I/SS?
The PIC24FJ32MC101-I/SS operates from 3.0 V to 3.6 V, making it a 3.3 V microcontroller. According to the Microchip Technology PIC24FJ16MC101/102 and PIC24FJ32MC101/102/104 data sheet, this supply range applies to the device operating conditions. The power rails must remain within those limits under motor-startup, transient, and idle conditions.
How much Flash and SRAM does PIC24FJ32MC101-I/SS have?
The PIC24FJ32MC101-I/SS contains 32 KB of Flash program memory, organized as 11K by 24 words, and 2 KB of SRAM. According to the Microchip Technology family data sheet, the Flash supports in-circuit programming, while the SRAM provides working storage for motor-control state, communications buffers, diagnostics, and stack operations.
What can replace PIC24FJ32MC101-I/SS on the same 20-pin SSOP footprint?
PIC24FJ32MC101-E/SS and PIC24FJ32MC101-H/SS are same-family, same-package alternatives for designs using the 20-pin SSOP footprint. Their key distinction is the device temperature grade rather than MCU memory or motor-control resources. Confirm the required ambient-temperature range and programmed-device requirements in the Microchip Technology data sheet before replacing the target.
Is PIC24FJ32MC101-I/SS the same as PIC24FJ32MC101-H/SS?
The PIC24FJ32MC101-I/SS and PIC24FJ32MC101-H/SS use the same 20-pin SSOP package and belong to the same PIC24FJ32MC101 family, but their temperature-grade codes differ. The replacement is appropriate only when the H-grade operating range satisfies the product's environmental requirements. Use the manufacturer ordering information and data sheet to confirm qualification limits.
Where can I download the PIC24FJ32MC101-I/SS datasheet PDF?
The official PIC24FJ32MC101-I/SS data sheet is available from Microchip Technology at the manufacturer PDF link on this page. It covers the PIC24FJ16MC101/102 and PIC24FJ32MC101/102/104 family, including the 20-pin device identifier, memory organization, electrical limits, CPU core, peripherals, and pin descriptions. Use the ordering-information table to distinguish package and grade suffixes.
Where can I find the PIC24FJ32MC101-I/SS pinout?
The PIC24FJ32MC101-I/SS pinout appears in the pin-description tables of the official Microchip Technology family data sheet. The device uses a 20-pin SSOP package, and its pins include power, ground, programming, oscillator, digital I/O, and multiplexed peripheral functions. Use the datasheet's alternate-function columns when assigning pins because several functions share the same physical pad.
What is the difference between PIC24FJ32MC101-I/SS and PIC24FJ32MC101-E/SS?
The principal difference is the operating-temperature grade associated with the suffix: I designates the industrial-grade target, while E identifies the extended-temperature counterpart. Both are 20-pin SSOP PIC24FJ32MC101 devices, so the footprint and core resource arrangement align. Confirm absolute maximum ratings, temperature limits, and qualification requirements for the finished product before substitution.
When should I choose PIC24FJ32MC101-I/SS over another motor-control MCU?
Choose the PIC24FJ32MC101-I/SS when a design needs a compact 20-pin SSOP device with three MCPWM channels, CTMU, RTCC, 32 KB of Flash, and 2 KB of SRAM at 16 MIPS. It is particularly suitable for low-cost motor-control products where the PIC24F toolchain and peripheral architecture are already established. Select another MCU if the application requires more memory, pins, timers, communications interfaces, or a different core ecosystem.
Is PIC24FJ32MC101-I/SS suitable for a 3.3 V industrial motor controller?
The PIC24FJ32MC101-I/SS is suitable for a 3.3 V industrial motor controller when its specified electrical and thermal limits are respected. It supports a 3.0 V to 3.6 V operating range, 16 MIPS execution, three MCPWM channels, CTMU, and an operating range of -40°C to +125°C for the specified grade. Separate signal conditioning and protection are still required for motor-node voltages.
How do I buy PIC24FJ32MC101-I/SS and check its lead time?
Use the Request a Quote form on this page to request the current price, stock position, and lead time for PIC24FJ32MC101-I/SS. The form allows procurement teams to confirm the exact 20-pin SSOP ordering code, including the I/SS temperature and package suffix, and to request the quantity needed for the production schedule.
What is the price of PIC24FJ32MC101-I/SS?
Current pricing for the PIC24FJ32MC101-I/SS is available through the Request a Quote form on this page. Submit the required quantity, target delivery date, and packaging preference so the quote reflects the exact MPN, 20-pin SSOP format, and current component availability rather than a generic family-level price.
Is PIC24FJ32MC101-I/SS in stock and what is its lead time?
Current stock and lead-time information for PIC24FJ32MC101-I/SS is available through the Request a Quote form on this page. Include your order quantity and required delivery date so fulfillment can confirm the exact grade and package. The form is the appropriate route for current component planning and production scheduling.
What is the best Microchip Technology equivalent for PIC24FJ32MC101-I/SS?
The closest same-family equivalents identified for the 20-pin SSOP footprint are PIC24FJ32MC101-E/SS and PIC24FJ32MC101-H/SS. They preserve the PIC24FJ32MC101 device identity and package, with temperature-grade selection as the principal decision. A cross-brand MCU is not automatically interchangeable because its pin multiplexing, interrupt architecture, peripherals, and programming ecosystem may differ.
Which programming tools and interfaces support PIC24FJ32MC101-I/SS?
PIC24FJ32MC101-I/SS is programmed through the PIC24F family programming interface using the dedicated ICSP connections described in the Microchip Technology family data sheet. The official PIC24FJXXMC Family Flash Programming Specification identifies ICSP as the most direct programming method, using PGECx and PGEDx. Production programming and development can therefore use compatible Microchip programmers and the supported IDE toolchain.

Datos de referencia de ingeniería para PIC24FJ32MC101-I/SS — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose PIC24FJ32MC101-I/SS for compact 3.3 V motor-control designs that need three MCPWM channels, CTMU, RTCC, 32 KB of Flash, 2 KB of SRAM, and a 20-pin SSOP footprint. It is a strong fit when a product already uses the PIC24F architecture or needs a cost-conscious control platform rather than a large communications-oriented MCU. PIC24FJ32MC101-E/SS is the logical same-footprint choice when the finished product requires the E temperature grade, while PIC24FJ32MC101-H/SS supports H-grade requirements. These alternatives preserve the core, memory, and motor-control resources but require careful environmental verification. Do not choose another MCU solely because it has the same pin count; verify pin multiplexing, oscillator requirements, programming connections, peripheral mappings, toolchain support, and production programming procedures. If the design needs substantially more RAM, Flash, communication peripherals, timers, or package pins, move to a larger member of the PIC24F family rather than forcing a different architecture onto the existing PCB.

Comparación con alternativas

Parámetro Este producto PIC24FJ32MC101-E/SS PIC24FJ32MC101-H/SS
Brand Microchip Technology Microchip Technology Microchip Technology
Package 20-pin SSOP 20-pin SSOP - same 20-pin SSOP - same
CPU Architecture PIC24F 16-bit PIC24F 16-bit PIC24F 16-bit
Maximum Instruction Rate 16 MIPS 16 MIPS 16 MIPS
Flash Memory 32 KB (11K x 24 words) 32 KB (11K x 24 words) 32 KB (11K x 24 words)
SRAM 2 KB 2 KB 2 KB
Operating Voltage 3.0 V to 3.6 V 3.0 V to 3.6 V 3.0 V to 3.6 V
Motor-Control PWM Channels 3 MCPWM channels 3 MCPWM channels 3 MCPWM channels
Analog Peripheral CTMU CTMU CTMU
Temperature Grade I grade, -40°C to +125°C E grade; exact limits not stated H grade; exact limits not stated

Diferenciadores clave

  • Integrated three-channel motor-control PWM (frente a PIC24FJ32MC101-H/SS)
  • CTMU measurement in a 20-pin control MCU (frente a PIC24FJ32MC101-E/SS)
  • Defined 16 MIPS processing headroom (frente a PIC24FJ32MC101-H/SS)

Notas de diseño

Separate the high-current motor path from the PIC24FJ32MC101-I/SS control section. Route gate-drive, phase, and shunt-current paths away from the CTMU inputs, oscillator pins, and programming interface. Use a compact ground return under the MCU, provide local supply decoupling at VDD and VSS, and place protection components near the connector or motor interface so surge current does not flow through sensitive board traces.

Design the 3.3 V rail for both control load and transients generated by the external motor driver. Place the bypass capacitor directly between the device's VDD and VSS pins, use a short and wide supply connection, and test startup with the motor at its most demanding operating state. Firmware should include brownout and overcurrent responses, but hardware protection must prevent unsafe switching before software intervention.

Do not infer a pin function from its port number alone because the 20-pin device combines digital I/O, analog inputs, CTMU functions, timer inputs, oscillator functions, and programming functions on shared pads. Check the pin-description table for the selected alternate function and peripheral instance. In particular, verify MCLR/VPP requirements, oscillator configuration, analog-only behavior, and the assignment of peripheral pin-select outputs before finalizing the PCB.

Treat CTMU sensor traces as sensitive measurement paths. Use short routes, a continuous ground reference, and guard spacing from PWM and motor-switching nets. The CTMU timing and compensation settings should be validated with the motor driver operating because switching-edge coupling can change the measured charge-transfer interval. If sensing accuracy is critical, synchronize measurements to a quiet portion of the switching cycle and maintain a defined sensor baseline.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The manufacturer product and family data-sheet results do not explicitly state the requested compliance classifications. Confirm lead-free, RoHS, REACH, halogen-free, conflict-minerals, and automotive-qualification status with Microchip Technology before releasing the component into a regulated product.

Datos verificados el: 2026-11-16 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

PIC24FJ32MC101-I/SS datasheet PIC24FJ32MC101-I/SS datasheet pdf PIC24FJ32MC101-I/SS pinout PIC24FJ32MC101-I/SS equivalent PIC24FJ32MC101-I/SS replacement PIC24FJ32MC101-I/SS price PIC24FJ32MC101-I/SS stock Microchip Technology PIC24FJ32MC101-I/SS PIC24FJ32MC101 16 MIPS microcontroller PIC24FJ32MC101 20 SSOP PIC24FJ32MC101 motor control application PIC24FJ32MC101-I/SS vs PIC24FJ32MC101-H/SS

Componentes & términos relacionados

Microchip Technology PIC24FJ32MC101-I/SS PIC24FJ32MC101-E/SS PIC24FJ32MC101-H/SS PIC24F PIC24FJ32MC101 PIC24FJ16MC101/102 PIC24FJ32MC101/102/104 16-bit microcontroller embedded microcontroller motor-control MCU MCPWM CTMU PPS RTCC PIC24F CPU flash memory SRAM ICSP PGECx PGEDx SSOP-20 surface mount SMD 3.3 V brushless DC motor control
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ