PIC24FJ32MC101-I/SS - 16-Bit 16 MIPS Motor Control MCU
Référence : PIC24FJ32MC101-I/SS ✓ ActifPIC24FJ32MC101-I/SS Présentation
A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. Within the embedded-control hierarchy, the PIC24FJ32MC101 belongs to the 16-bit microcontroller class and combines general-purpose embedded processing with dedicated motor-control resources. Its compact SSOP-20 format is useful when motor-control functionality must fit into space-constrained industrial, appliance, and embedded-control products.
The device provides three MCPWM channels, CTMU, peripheral pin select, and a real-time clock and calendar. These resources allow timer-based switching, fault detection, analog measurement, and precise peripheral routing without requiring a separate timing controller. The 16 MIPS execution rate provides useful processing headroom for closed-loop motor algorithms, sensor filtering, communication handling, and supervisory logic. The manufacturer describes the family as an ultra-low-cost, high-performance 16-bit motor-control platform with small-footprint options.
The PIC24F core uses 16-bit registers and a code-efficient instruction set optimized for compiled C and assembly. Program memory is organized as 11K by 24 words, while the device provides 2 KB of SRAM for working data. Its operating specification covers 3.0 V to 3.6 V and an industrial temperature range of -40°C to +125°C for the specified grade, supporting use across demanding embedded environments.
Typical applications include brushless DC motor controllers, two-phase and three-phase induction-motor drives, compact power converters, appliance motor controls, pump controllers, and industrial automation modules. The MCPWM peripherals are especially valuable in variable-speed drives, while CTMU supports capacitive sensing and precision analog measurement tasks.
PCB implementation requires close attention to the 20-pin SSOP footprint, 3.3 V power distribution, decoupling, programming access, and motor-power isolation. Place input and output capacitors near their associated pins, route high-current switching paths away from sensitive control traces, and use the datasheet pin-description table when assigning alternate peripheral functions.
This page combines the manufacturer device specifications with practical motor-control design guidance, application selection criteria, verified drop-in alternatives, and a parameter-by-parameter comparison. These engineering details help developers evaluate the PIC24FJ32MC101-I/SS beyond a basic catalog listing before beginning firmware and PCB development.
Alternatives de remplacement direct pour PIC24FJ32MC101-I/SS — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec PIC24FJ32MC101-I/SS (même facteur de forme et même empreinte) — différant par Package, Operating Temperature, CPU Architecture, Operating Voltage, Peripheral Pin Select.
PIC24FJ32MC101-E/SS
✅ Remplacement direct ⚠️ Spécifications non vérifiéesContactez-nous pour le prix
Voir la fiche technique →PIC24FJ32MC101-H/SS
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PIC24FJ32MC101-I/SS Valeurs maximales et caractéristiques électriques
| Product Type | 16-bit Flash microcontroller |
| CPU Architecture | PIC24F 16-bit core |
| Maximum Instruction Rate | 16 MIPS |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 32 KB (11K x 24 words) |
| SRAM | 2 KB |
| Operating Voltage | 3.0 V to 3.6 V |
| Tension d'alimentation | 3.3 V |
| Température de fonctionnement | -40°C to +125°C |
| Motor-Control PWM Channels | 3 MCPWM channels |
| Analog Peripheral | CTMU |
| Peripheral Pin Select | Supported |
| Real-Time Clock and Calendar | RTCC |
| Programmable Oscillator | 16 MHz |
| Boîtier | 20-pin SSOP |
| Package Body Width | 5.30 mm |
| Type de montage | Surface Mount |
Configuration des broches de PIC24FJ32MC101-I/SS
| Broche 1 | MCLR/VPP — Program mode and reset input; programming voltage input |
| Broche 2 | RA0/AN0/ULPWU/C1IN+ — Digital input and output, analog input, ultra-low-power wake-up, and CTMU comparator input |
| Broche 3 | RA1/AN1/ULPWU/C1IN- — Digital input and output, analog input, ultra-low-power wake-up, and CTMU comparator input |
| Broche 4 | RA2/AN2/ULPWU/C2IN+ — Digital input and output, analog input, ultra-low-power wake-up, and CTMU comparator input |
| Broche 5 | RA3/AN3/C1IN- — Digital input and output, analog input, and CTMU comparator input |
| Broche 6 | RA4/T1OSC/C1OUT — Digital input and output, Timer 1 oscillator input, and CTMU comparator output |
| Broche 7 | RA5/AN4/T1CLKI/OC1 — Digital input and output, analog input, Timer 1 clock input, and output compare |
| Broche 8 | VSS — Ground reference |
| Broche 9 | RA6/AN5/OC2 — Digital input and output, analog input, and output compare |
| Broche 10 | RA7/AN6 — Digital input and output and analog input |
| Broche 11 | VDD — Positive supply voltage |
| Broche 12 | RA8/AN7/C2IN- — Digital input and output, analog input, and CTMU comparator input |
| Broche 13 | RA9/AN8 — Digital input and output and analog input |
| Broche 14 | RA10/AN9/C3IN+ — Digital input and output, analog input, and CTMU comparator input |
| Broche 15 | VSS — Ground reference |
| Broche 16 | OSC1/CLKI — Oscillator crystal or clock input |
| Broche 17 | OSC2/CLKO — Oscillator crystal or clock output |
| Broche 18 | RA11/AN10/C3IN- — Digital input and output, analog input, and CTMU comparator input |
| Broche 19 | RA12/AN11 — Digital input and output and analog input |
| Broche 20 | RA13/AN12 — Digital input and output and analog input |
Applications typiques
PIC24FJ32MC101-I/SS convient pour 6 applications: Brushless DC Motor Controller, Industrial Pump Controller, Household Appliance Motor Control, Capacitive Sensor Interface, Compact Power Converter Controller, Timing and Real-Time Clock Module.
Brushless DC Motor Controller
The PIC24FJ32MC101-I/SS fits compact brushless DC motor controls because its three MCPWM channels can generate the switching signals required by a three-phase inverter. The 16 MIPS PIC24F core leaves processing capacity for commutation timing, current sampling, speed control, and fault handling. Its 32 KB of Flash accommodates motor-control firmware and parameter tables, while 2 KB of SRAM supports control state and diagnostics. Running from 3.0 V to 3.6 V also supports integration with a 3.3 V control architecture. The principal design consideration is separating high-current switching paths from sensitive control and sensing traces.
Recommandé
Industrial Pump Controller
The PIC24FJ32MC101-I/SS is suitable for small industrial pump and circulation-system controllers where accurate timing, closed-loop regulation, and compact packaging are important. Its MCPWM channels can drive an inverter or chopper stage, while the 16 MIPS core can execute PID control, sensor filtering, and pump-state logic. The 2 KB SRAM is sufficient for short control loops and operating parameters, and the 32 KB Flash provides room for calibration data and diagnostics. The -40°C to +125°C operating range supports demanding industrial environments when the motor driver, protection network, and thermal design are independently validated.
Recommandé
Household Appliance Motor Control
The PIC24FJ32MC101-I/SS supports cost-sensitive appliance designs that combine motor regulation with capacitive sensing or analog measurement. The CTMU can support touch controls and related measurement functions, while the three MCPWM channels handle efficient motor excitation in a small PCB area. At 20 pins, the SSOP package reduces routing space compared with larger motor-control MCUs, and 16 MIPS provides adequate control-loop performance. Designers should use the dedicated motor-driver interface, maintain short feedback routes, and validate conducted and radiated emissions because the compact switching stage can couple noise into control signals.
Recommandé
Capacitive Sensor Interface
The PIC24FJ32MC101-I/SS can act as the control MCU in a capacitive-sensing system because CTMU provides a dedicated measurement peripheral. It is appropriate for appliance interfaces, industrial touch controls, and equipment requiring both sensing and motor supervision in one device. The 16 MIPS core can manage timing, filtering, debouncing, and communication while leaving motor-control functions available through MCPWM. Keep CTMU sensor traces away from switching nodes and provide a clean ground reference, since high dv/dt from an inverter can corrupt charge-transfer measurements. Firmware should also validate sensor timing and noise rejection during worst-case motor operation.
Recommandé
Compact Power Converter Controller
The PIC24FJ32MC101-I/SS can control a compact switching power converter because its MCPWM channels, 16 MIPS processing rate, and 2 KB SRAM support feedback-loop calculation and timing functions. The 3.0 V to 3.6 V operating range aligns with common 3.3 V control rails. Its 32 KB Flash capacity is useful for compensation settings, protection logic, and communication routines. For a reliable implementation, use the PWM outputs to drive power switches through suitable gate drivers, keep high-current paths away from the MCU, and include cycle-by-cycle overcurrent and undervoltage protection in hardware rather than relying solely on firmware.
Recommandé
Timing and Real-Time Clock Module
The PIC24FJ32MC101-I/SS can serve as a compact timing controller because it combines the RTCC with the peripheral pin select function and a 16 MIPS core. This makes it useful for equipment that needs calendar, interval, or scheduled-event handling alongside motor or actuator supervision. The RTCC provides a dedicated real-time function without requiring another device, and PPS can distribute a precise periodic reference to related circuitry. Validate timer accuracy against the selected oscillator and load, protect the oscillator network from nearby switching stages, and specify a backup strategy if the product must retain time across a complete power interruption.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour PIC24FJ32MC101-I/SS — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | PIC24FJ32MC101-E/SS | PIC24FJ32MC101-H/SS |
|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 20-pin SSOP | 20-pin SSOP - same | 20-pin SSOP - same |
| CPU Architecture | PIC24F 16-bit | PIC24F 16-bit | PIC24F 16-bit |
| Maximum Instruction Rate | 16 MIPS | 16 MIPS | 16 MIPS |
| Flash Memory | 32 KB (11K x 24 words) | 32 KB (11K x 24 words) | 32 KB (11K x 24 words) |
| SRAM | 2 KB | 2 KB | 2 KB |
| Operating Voltage | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V |
| Motor-Control PWM Channels | 3 MCPWM channels | 3 MCPWM channels | 3 MCPWM channels |
| Analog Peripheral | CTMU | CTMU | CTMU |
| Temperature Grade | I grade, -40°C to +125°C | E grade; exact limits not stated | H grade; exact limits not stated |
Principaux différenciateurs
- Integrated three-channel motor-control PWM (vs PIC24FJ32MC101-H/SS)
- CTMU measurement in a 20-pin control MCU (vs PIC24FJ32MC101-E/SS)
- Defined 16 MIPS processing headroom (vs PIC24FJ32MC101-H/SS)
Notes de conception
Separate the high-current motor path from the PIC24FJ32MC101-I/SS control section. Route gate-drive, phase, and shunt-current paths away from the CTMU inputs, oscillator pins, and programming interface. Use a compact ground return under the MCU, provide local supply decoupling at VDD and VSS, and place protection components near the connector or motor interface so surge current does not flow through sensitive board traces.
Design the 3.3 V rail for both control load and transients generated by the external motor driver. Place the bypass capacitor directly between the device's VDD and VSS pins, use a short and wide supply connection, and test startup with the motor at its most demanding operating state. Firmware should include brownout and overcurrent responses, but hardware protection must prevent unsafe switching before software intervention.
Do not infer a pin function from its port number alone because the 20-pin device combines digital I/O, analog inputs, CTMU functions, timer inputs, oscillator functions, and programming functions on shared pads. Check the pin-description table for the selected alternate function and peripheral instance. In particular, verify MCLR/VPP requirements, oscillator configuration, analog-only behavior, and the assignment of peripheral pin-select outputs before finalizing the PCB.
Treat CTMU sensor traces as sensitive measurement paths. Use short routes, a continuous ground reference, and guard spacing from PWM and motor-switching nets. The CTMU timing and compensation settings should be validated with the motor driver operating because switching-edge coupling can change the measured charge-transfer interval. If sensing accuracy is critical, synchronize measurements to a quiet portion of the switching cycle and maintain a defined sensor baseline.
Informations de conformité
The manufacturer product and family data-sheet results do not explicitly state the requested compliance classifications. Confirm lead-free, RoHS, REACH, halogen-free, conflict-minerals, and automotive-qualification status with Microchip Technology before releasing the component into a regulated product.