PIC32MZ1024EFE100-I/PF - 200MHz 1MB Flash 100-TQFP MCU | Microchip
N.º de pieza: PIC32MZ1024EFE100-I/PF ✓ Activo| Cant. | Precio unitario | Total |
|---|---|---|
| 1 | $14.85 | $14,85 |
| 10 | $13.46 | $134,60 |
| 100 | $11.97 | $1.197,00 |
| 500 | $10.55 | $5.275,00 |
| 1.000 | $9.4 | $9.400,00 |
PIC32MZ1024EFE100-I/PF Descripción general
An MCU is a microcontroller unit, a single-chip computer containing a processor core, memory and peripherals. PIC32MZ EF devices sit at the top of Microchip's 32-bit MCU family, bridging embedded connectivity, graphics HMI and motor-control workloads. They use a dual-panel Flash architecture that supports live-update firmware swaps without downtime, an important feature for industrial gateways and IoT edge nodes that must remain reachable during OTA upgrades.
Key features include 200 MHz / 330 DMIPS core performance, dual-panel live-update Flash, hardware crypto accelerators on crypto variants, 1 MB Flash and 256 KB SRAM in this -I/PF part, HS USB 2.0 with on-chip PHY, 10/100 Ethernet MAC, two CAN modules, and a parallel master port for external graphics controllers. The 100-pin TQFP provides generous GPIO (78 I/O), five 16-bit timer/counters, nine compare/PWM outputs and nine input-capture channels for motor-control and power-converter designs.
Architecturally, the PIC32MZ EF core includes DSP-enhanced single-cycle MAC, saturating and fractional math units, dual-precision FPU and tightly coupled prefetch cache. The dual-panel Flash and shadow register set let firmware keep both old and new images resident, so a watchdog reset never leaves the unit bricked even if a new image fails to boot. Internal LDO supplies 1.8V to the core while I/O retains 3.3V compatibility, simplifying mixed-voltage designs.
Typical applications include industrial IoT gateways, HMI and graphics touch panels, automotive infotainment prototyping, motor-control drives, audio peripherals with I²S/USB streaming, and secure connected sensors. Industrial -40C to +85C parts are required for outdoor and factory-floor deployment. For automotive-grade operation in -40C to +125C select PIC32MZ1024EFE100-E/PF or Q-graded variants.
When designing with this part, allocate boot pins on quad 1 first; PGEC1/PGED1 must remain accessible for ICSP programming and debug. Place a 0.1 µF decoupling capacitor adjacent to every VDDCORE/VDD pin pair and keep the analog AV+ supply trace isolated from digital switching currents. Always enable the WDT and a backup image in dual-panel Flash to recover from failed live-update events.
This page synthesizes distributor pricing, drop-in alternatives in the same 100-TQFP footprint, and practical design notes for the PIC32MZ EF family not consolidated in any single manufacturer document.
Alternativas directas para PIC32MZ1024EFE100-I/PF — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con PIC32MZ1024EFE100-I/PF (mismo factor de forma y huella) — difiere en ADC, Package, Core Architecture, Operating Temperature, CAN.
Herramienta de comparación rápida — seleccione piezas alternativas para compararlas lado a lado:
PIC32MZ1024ECG100-I/PF
✅ Sustitución directa✓ En stock
$9.57 / unidad
Ver hoja de datos →PIC32MZ1024ECH100-I/PF
✅ Sustitución directa✓ En stock
$8.74 / unidad
Ver hoja de datos →PIC32MZ1024EFE100-I/PT
✅ Sustitución directa✓ En stock
$8.1 / unidad
Ver hoja de datos →PIC32MZ1024ECM100-I/PF
✅ Sustitución directa✓ En stock
$6.65 / unidad
Ver hoja de datos →PIC32MZ1024EFE100-I/PF Valores máximos y características eléctricas
| Core Architecture | MIPS32 M-Class Warrior (PIC32MZ EF) |
| Core Frequency | 200 MHz (330 DMIPS) |
| FPU | Yes, IEEE 754 single-precision hardware |
| DSP Extensions | Single-cycle MAC, four 64-bit accumulators, saturating and fractional math |
| Flash Memory | 1 MB (1M x 8) dual-panel live-update |
| SRAM | 256 KB |
| Crypto Accelerator | Not present (No-Crypto variant) |
| Operating Voltage | 2.3 V to 3.6 V |
| Rango de temperatura de funcionamiento | -40C to +85C (industrial) |
| ADC | 12-bit, up to 18 channels, 3.125 MSPS |
| USB | USB 2.0 High-Speed with integrated PHY |
| Ethernet | 10/100 Mbps MAC (external PHY via RMII) |
| CAN | 2x CAN 2.0B modules |
| UART / SPI / I2C | 6 UART, 4 SPI, 5 I2C |
| Timers / PWM / Input Capture | 9 16-bit timers, 9 PWM, 9 IC |
| GPIO | 78 I/O pins |
| Encapsulado | 100-pin TQFP (PF), 14x14 mm, 0.5 mm pitch |
| Tipo de montaje | Surface Mount |
| Nivel MSL | 3 (per Microchip datasheet moisture sensitivity classification) |
| Estado RoHS | Compliant |
Guía de configuración de pines de PIC32MZ1024EFE100-I/PF 100-pin tqfp (pf), 14x14 mm, 0.5 mm pitch
Configuración de pines para PIC32MZ1024EFE100-I/PF (encapsulado 100-pin tqfp (pf), 14x14 mm, 0.5 mm pitch). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para PIC32MZ1024EFE100-I/PF.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
PIC32MZ1024EFE100-I/PF es adecuado para 6 aplicacións: Industrial IoT Gateway, HMI and Graphics Touch Panel, Motor Control and Variable-Frequency Drive, USB Audio Streaming Device, Automotive Infotainment Prototype, Connected Sensor Aggregator.
Industrial IoT Gateway
The PIC32MZ1024EFE100-I/PF is an excellent fit for industrial IoT gateways because its 200 MHz MIPS32 M-Class core, hardware FPU and DSP extensions can run TLS stacks and edge-protocol parsing without offloading to a companion processor. The dual-panel live-update Flash lets the gateway swap firmware images while keeping the device reachable, so OTA rollouts on Modbus-TCP, MQTT or OPC-UA bridges no longer require scheduled downtime windows. On-chip USB 2.0 High-Speed with integrated PHY and 10/100 Ethernet MAC let the design expose both a local console and a wired uplink without external interface chips. The industrial -40C to +85C temperature grade and 78 GPIO support direct attachment of opto-isolated digital inputs and relay outputs typical of a factory-floor concentrator.
Recomendado
HMI and Graphics Touch Panel
The PIC32MZ1024EFE100-I/PF suits HMI touch panels thanks to its parallel master port that drives an external LCD controller or FPGA-based graphics engine, plus an integrated 12-bit 18-channel ADC that reads 4-wire resistive touchscreens directly. The hardware FPU and 256 KB SRAM give it headroom for vector rendering, anti-aliased fonts and simple animations without leaning on an external SDRAM controller. With 1 MB Flash the design can store multi-language UI strings, splash screens and a small bitmap library entirely on-chip. Six UART and five I²C ports allow direct wiring of multi-zone LED backlight drivers, capacitive-touch I²C bridges and audio codec I²S for click-feedback.
Recomendado
Motor Control and Variable-Frequency Drive
For motor control the PIC32MZ1024EFE100-I/PF provides nine 16-bit timers, nine PWM outputs and nine input-capture channels that map directly to a three-phase inverter with brake and fault inputs. Single-cycle DSP MAC and the hardware FPU accelerate field-oriented control math at the 200 MHz system clock, sustaining the typical 10 to 20 kHz control loop with margin for sensorless observers. Dual CAN modules serve CANopen or CiA-402 drives while Ethernet supports EtherCAT or POWERLINK slaves via an external Phy. Industrial -40C to +85C operation plus 256 KB SRAM for control buffers covers HVAC fans, conveyor servos and small pump drives in factory automation.
Recomendado
USB Audio Streaming Device
The PIC32MZ1024EFE100-I/PF is well matched to USB audio peripherals because its integrated USB 2.0 High-Speed controller and on-chip PHY can stream 24-bit 96 kHz multi-channel audio without an external ULPI transceiver. The I²S/SSC peripheral pair feeds a low-latency path to a DAC or ADC codec while the 200 MHz MIPS core handles class-compliant USB descriptors, sample-rate conversion and DSP-style volume curves. With 256 KB SRAM and 1 MB Flash the part stores USB descriptors, firmware updater images and small ringing buffers entirely on-chip. The 100-pin TQFP exposes enough GPIO for button matrices, rotary encoders and status LEDs on a USB headphone amplifier or USB microphone.
Recomendado
Automotive Infotainment Prototype
For pre-production automotive infotainment designs the PIC32MZ1024EFE100-I/PF provides the MIPS horsepower, dual CAN buses and Ethernet MAC required to prototype head-unit gateways and instrument clusters. Dual-panel live-update Flash lets developers iterate on HMI stacks and DSP audio pipelines in-vehicle without bricking the unit during field tests. The -I/PF industrial part is suitable for cabin-temperature environments while the -E/PF extended-temperature variant in the same 100-TQFP pinout is appropriate for under-hood pilots. USB High-Speed supports CarPlay/Android Auto bridging prototypes and the parallel master port drives LVDS serializer-based display links.
Recomendado
Connected Sensor Aggregator
The PIC32MZ1024EFE100-I/PF works as a multi-protocol sensor aggregator, with five I²C, four SPI and six UART ports to collect data from MEMS accelerometers, environmental sensors, BLE bridges and GPS modules. The hardware FPU and DSP extensions let it run on-device filtering and FFT analysis before publishing over Ethernet, USB or CAN. With 78 GPIO in the 100-pin TQFP and 18 channels of 12-bit ADC the device can directly supervise analog front ends for vibration, current and temperature. The 1 MB dual-panel Flash supports A/B firmware images so remote aggregators self-recover after failed OTA updates, a key requirement for unattended edge nodes.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para PIC32MZ1024EFE100-I/PF — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | PIC32MZ1024ECG100-I/PF | PIC32MZ1024ECH100-I/PF | PIC32MZ1024EFE100-I/PT | PIC32MZ1024ECM100-I/PF |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 100-pin TQFP (PF, 14x14 mm) | 100-pin TQFP (PF, 14x14 mm) - same | 100-pin TQFP (PF, 14x14 mm) - same | 100-pin TQFP (PT, 12x12 mm) - same pin count, smaller body | 100-pin TQFP (PF, 14x14 mm) - same |
| Core Family | PIC32MZ EF (MIPS32 M-Class) | PIC32MZ EC | PIC32MZ EC with hardware crypto | PIC32MZ EF | PIC32MZ EC |
| Core Frequency | 200 MHz (330 DMIPS) | 200 MHz | 200 MHz | 200 MHz | 200 MHz |
| Flash / SRAM | 1 MB / 256 KB | 1 MB / 256 KB | 1 MB / 256 KB | 1 MB / 256 KB | 1 MB / 256 KB |
| Hardware Crypto | No | No | Yes | No | No |
| USB 2.0 High-Speed PHY | Yes (integrated) | Yes | Yes | Yes | Yes |
| Ethernet MAC | 10/100 (RMII) | 10/100 | 10/100 | 10/100 | 10/100 |
| Operating Temperature | -40C to +85C (Industrial) | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C |
Diferenciadores clave
- Dual-panel live-update Flash (frente a PIC32MX795F512L)
- 200 MHz core with hardware FPU and DSP extensions (frente a PIC32MX795F512L)
- Integrated USB 2.0 High-Speed PHY and Ethernet MAC (frente a PIC32MX795F512L)
Notas de diseño
Decouple every VDDCORE/VDD pin pair with a 0.1 µF X7R capacitor placed within 2 mm of the package pin, and add a single 4.7 µF bulk capacitor near the IC. The PIC32MZ EF integrates two on-chip LDOs (1.2V and 1.8V) plus the 3.3V I/O rail; keep the trace from VBAT to the internal regulator short and isolated from high-current switching nodes. Avoid stacking multiple vias on the core-supply pads to limit inductance.
The 100-pin TQFP (PF) has a 14x14 mm body with 0.5 mm pitch; route two traces between pads and use a 4-layer PCB with a continuous ground plane under the device. Keep the 25 MHz primary crystal trace under 5 mm and place the load capacitors within 3 mm of the OSC1/OSC2 pins to avoid EMI and clock jitter. Route USB DP/DM as a 90-ohm differential pair with no splits in the reference plane.
Always keep PGEC1/PGED1 accessible for ICSP programming and debug, even in production boards, or you'll lose the ability to recover a bricked unit. Enable the dual-panel live-update feature with a watchdog timeout and an automatic rollback to the backup image after three consecutive failed boots. Do not exceed 3.6 V on any digital I/O pin; the analog AV+ pin has its own decoupling network and must not be tied directly to VDD without a ferrite bead.
Información de cumplimiento
RoHS and REACH compliant per Microchip product page. The -I/PF part is industrial grade (not AEC-Q100 qualified); for AEC-Q100 automotive applications select the PIC32MZ1024EFE100-E/PF extended temperature variant or a Q-suffix automotive grade.
