PIC32MZ1024EFE100-I/PF - 200MHz 1MB Flash 100-TQFP MCU | Microchip
Référence : PIC32MZ1024EFE100-I/PF ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $14.85 | $14,85 |
| 10 | $13.46 | $134,60 |
| 100 | $11.97 | $1 197,00 |
| 500 | $10.55 | $5 275,00 |
| 1 000 | $9.4 | $9 400,00 |
PIC32MZ1024EFE100-I/PF Présentation
An MCU is a microcontroller unit, a single-chip computer containing a processor core, memory and peripherals. PIC32MZ EF devices sit at the top of Microchip's 32-bit MCU family, bridging embedded connectivity, graphics HMI and motor-control workloads. They use a dual-panel Flash architecture that supports live-update firmware swaps without downtime, an important feature for industrial gateways and IoT edge nodes that must remain reachable during OTA upgrades.
Key features include 200 MHz / 330 DMIPS core performance, dual-panel live-update Flash, hardware crypto accelerators on crypto variants, 1 MB Flash and 256 KB SRAM in this -I/PF part, HS USB 2.0 with on-chip PHY, 10/100 Ethernet MAC, two CAN modules, and a parallel master port for external graphics controllers. The 100-pin TQFP provides generous GPIO (78 I/O), five 16-bit timer/counters, nine compare/PWM outputs and nine input-capture channels for motor-control and power-converter designs.
Architecturally, the PIC32MZ EF core includes DSP-enhanced single-cycle MAC, saturating and fractional math units, dual-precision FPU and tightly coupled prefetch cache. The dual-panel Flash and shadow register set let firmware keep both old and new images resident, so a watchdog reset never leaves the unit bricked even if a new image fails to boot. Internal LDO supplies 1.8V to the core while I/O retains 3.3V compatibility, simplifying mixed-voltage designs.
Typical applications include industrial IoT gateways, HMI and graphics touch panels, automotive infotainment prototyping, motor-control drives, audio peripherals with I²S/USB streaming, and secure connected sensors. Industrial -40C to +85C parts are required for outdoor and factory-floor deployment. For automotive-grade operation in -40C to +125C select PIC32MZ1024EFE100-E/PF or Q-graded variants.
When designing with this part, allocate boot pins on quad 1 first; PGEC1/PGED1 must remain accessible for ICSP programming and debug. Place a 0.1 µF decoupling capacitor adjacent to every VDDCORE/VDD pin pair and keep the analog AV+ supply trace isolated from digital switching currents. Always enable the WDT and a backup image in dual-panel Flash to recover from failed live-update events.
This page synthesizes distributor pricing, drop-in alternatives in the same 100-TQFP footprint, and practical design notes for the PIC32MZ EF family not consolidated in any single manufacturer document.
Alternatives de remplacement direct pour PIC32MZ1024EFE100-I/PF — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec PIC32MZ1024EFE100-I/PF (même facteur de forme et même empreinte) — différant par ADC, Package, Core Architecture, Operating Temperature, CAN.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
PIC32MZ1024ECG100-I/PF
✅ Remplacement direct✓ En stock
$9.57 / unité
Voir la fiche technique →PIC32MZ1024ECH100-I/PF
✅ Remplacement direct✓ En stock
$8.74 / unité
Voir la fiche technique →PIC32MZ1024EFE100-I/PT
✅ Remplacement direct✓ En stock
$8.1 / unité
Voir la fiche technique →PIC32MZ1024ECM100-I/PF
✅ Remplacement direct✓ En stock
$6.65 / unité
Voir la fiche technique →PIC32MZ1024EFE100-I/PF Valeurs maximales et caractéristiques électriques
| Core Architecture | MIPS32 M-Class Warrior (PIC32MZ EF) |
| Core Frequency | 200 MHz (330 DMIPS) |
| FPU | Yes, IEEE 754 single-precision hardware |
| DSP Extensions | Single-cycle MAC, four 64-bit accumulators, saturating and fractional math |
| Flash Memory | 1 MB (1M x 8) dual-panel live-update |
| SRAM | 256 KB |
| Crypto Accelerator | Not present (No-Crypto variant) |
| Operating Voltage | 2.3 V to 3.6 V |
| Plage de température de fonctionnement | -40C to +85C (industrial) |
| ADC | 12-bit, up to 18 channels, 3.125 MSPS |
| USB | USB 2.0 High-Speed with integrated PHY |
| Ethernet | 10/100 Mbps MAC (external PHY via RMII) |
| CAN | 2x CAN 2.0B modules |
| UART / SPI / I2C | 6 UART, 4 SPI, 5 I2C |
| Timers / PWM / Input Capture | 9 16-bit timers, 9 PWM, 9 IC |
| GPIO | 78 I/O pins |
| Boîtier | 100-pin TQFP (PF), 14x14 mm, 0.5 mm pitch |
| Type de montage | Surface Mount |
| Niveau MSL | 3 (per Microchip datasheet moisture sensitivity classification) |
| Statut RoHS | Compliant |
Guide de configuration des broches du PIC32MZ1024EFE100-I/PF 100-pin tqfp (pf), 14x14 mm, 0.5 mm pitch
Configuration des broches du PIC32MZ1024EFE100-I/PF (boîtier 100-pin tqfp (pf), 14x14 mm, 0.5 mm pitch). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour PIC32MZ1024EFE100-I/PF.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
PIC32MZ1024EFE100-I/PF convient pour 6 applications: Industrial IoT Gateway, HMI and Graphics Touch Panel, Motor Control and Variable-Frequency Drive, USB Audio Streaming Device, Automotive Infotainment Prototype, Connected Sensor Aggregator.
Industrial IoT Gateway
The PIC32MZ1024EFE100-I/PF is an excellent fit for industrial IoT gateways because its 200 MHz MIPS32 M-Class core, hardware FPU and DSP extensions can run TLS stacks and edge-protocol parsing without offloading to a companion processor. The dual-panel live-update Flash lets the gateway swap firmware images while keeping the device reachable, so OTA rollouts on Modbus-TCP, MQTT or OPC-UA bridges no longer require scheduled downtime windows. On-chip USB 2.0 High-Speed with integrated PHY and 10/100 Ethernet MAC let the design expose both a local console and a wired uplink without external interface chips. The industrial -40C to +85C temperature grade and 78 GPIO support direct attachment of opto-isolated digital inputs and relay outputs typical of a factory-floor concentrator.
Recommandé
HMI and Graphics Touch Panel
The PIC32MZ1024EFE100-I/PF suits HMI touch panels thanks to its parallel master port that drives an external LCD controller or FPGA-based graphics engine, plus an integrated 12-bit 18-channel ADC that reads 4-wire resistive touchscreens directly. The hardware FPU and 256 KB SRAM give it headroom for vector rendering, anti-aliased fonts and simple animations without leaning on an external SDRAM controller. With 1 MB Flash the design can store multi-language UI strings, splash screens and a small bitmap library entirely on-chip. Six UART and five I²C ports allow direct wiring of multi-zone LED backlight drivers, capacitive-touch I²C bridges and audio codec I²S for click-feedback.
Recommandé
Motor Control and Variable-Frequency Drive
For motor control the PIC32MZ1024EFE100-I/PF provides nine 16-bit timers, nine PWM outputs and nine input-capture channels that map directly to a three-phase inverter with brake and fault inputs. Single-cycle DSP MAC and the hardware FPU accelerate field-oriented control math at the 200 MHz system clock, sustaining the typical 10 to 20 kHz control loop with margin for sensorless observers. Dual CAN modules serve CANopen or CiA-402 drives while Ethernet supports EtherCAT or POWERLINK slaves via an external Phy. Industrial -40C to +85C operation plus 256 KB SRAM for control buffers covers HVAC fans, conveyor servos and small pump drives in factory automation.
Recommandé
USB Audio Streaming Device
The PIC32MZ1024EFE100-I/PF is well matched to USB audio peripherals because its integrated USB 2.0 High-Speed controller and on-chip PHY can stream 24-bit 96 kHz multi-channel audio without an external ULPI transceiver. The I²S/SSC peripheral pair feeds a low-latency path to a DAC or ADC codec while the 200 MHz MIPS core handles class-compliant USB descriptors, sample-rate conversion and DSP-style volume curves. With 256 KB SRAM and 1 MB Flash the part stores USB descriptors, firmware updater images and small ringing buffers entirely on-chip. The 100-pin TQFP exposes enough GPIO for button matrices, rotary encoders and status LEDs on a USB headphone amplifier or USB microphone.
Recommandé
Automotive Infotainment Prototype
For pre-production automotive infotainment designs the PIC32MZ1024EFE100-I/PF provides the MIPS horsepower, dual CAN buses and Ethernet MAC required to prototype head-unit gateways and instrument clusters. Dual-panel live-update Flash lets developers iterate on HMI stacks and DSP audio pipelines in-vehicle without bricking the unit during field tests. The -I/PF industrial part is suitable for cabin-temperature environments while the -E/PF extended-temperature variant in the same 100-TQFP pinout is appropriate for under-hood pilots. USB High-Speed supports CarPlay/Android Auto bridging prototypes and the parallel master port drives LVDS serializer-based display links.
Recommandé
Connected Sensor Aggregator
The PIC32MZ1024EFE100-I/PF works as a multi-protocol sensor aggregator, with five I²C, four SPI and six UART ports to collect data from MEMS accelerometers, environmental sensors, BLE bridges and GPS modules. The hardware FPU and DSP extensions let it run on-device filtering and FFT analysis before publishing over Ethernet, USB or CAN. With 78 GPIO in the 100-pin TQFP and 18 channels of 12-bit ADC the device can directly supervise analog front ends for vibration, current and temperature. The 1 MB dual-panel Flash supports A/B firmware images so remote aggregators self-recover after failed OTA updates, a key requirement for unattended edge nodes.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour PIC32MZ1024EFE100-I/PF — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | PIC32MZ1024ECG100-I/PF | PIC32MZ1024ECH100-I/PF | PIC32MZ1024EFE100-I/PT | PIC32MZ1024ECM100-I/PF |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 100-pin TQFP (PF, 14x14 mm) | 100-pin TQFP (PF, 14x14 mm) - same | 100-pin TQFP (PF, 14x14 mm) - same | 100-pin TQFP (PT, 12x12 mm) - same pin count, smaller body | 100-pin TQFP (PF, 14x14 mm) - same |
| Core Family | PIC32MZ EF (MIPS32 M-Class) | PIC32MZ EC | PIC32MZ EC with hardware crypto | PIC32MZ EF | PIC32MZ EC |
| Core Frequency | 200 MHz (330 DMIPS) | 200 MHz | 200 MHz | 200 MHz | 200 MHz |
| Flash / SRAM | 1 MB / 256 KB | 1 MB / 256 KB | 1 MB / 256 KB | 1 MB / 256 KB | 1 MB / 256 KB |
| Hardware Crypto | No | No | Yes | No | No |
| USB 2.0 High-Speed PHY | Yes (integrated) | Yes | Yes | Yes | Yes |
| Ethernet MAC | 10/100 (RMII) | 10/100 | 10/100 | 10/100 | 10/100 |
| Operating Temperature | -40C to +85C (Industrial) | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C |
Principaux différenciateurs
- Dual-panel live-update Flash (vs PIC32MX795F512L)
- 200 MHz core with hardware FPU and DSP extensions (vs PIC32MX795F512L)
- Integrated USB 2.0 High-Speed PHY and Ethernet MAC (vs PIC32MX795F512L)
Notes de conception
Decouple every VDDCORE/VDD pin pair with a 0.1 µF X7R capacitor placed within 2 mm of the package pin, and add a single 4.7 µF bulk capacitor near the IC. The PIC32MZ EF integrates two on-chip LDOs (1.2V and 1.8V) plus the 3.3V I/O rail; keep the trace from VBAT to the internal regulator short and isolated from high-current switching nodes. Avoid stacking multiple vias on the core-supply pads to limit inductance.
The 100-pin TQFP (PF) has a 14x14 mm body with 0.5 mm pitch; route two traces between pads and use a 4-layer PCB with a continuous ground plane under the device. Keep the 25 MHz primary crystal trace under 5 mm and place the load capacitors within 3 mm of the OSC1/OSC2 pins to avoid EMI and clock jitter. Route USB DP/DM as a 90-ohm differential pair with no splits in the reference plane.
Always keep PGEC1/PGED1 accessible for ICSP programming and debug, even in production boards, or you'll lose the ability to recover a bricked unit. Enable the dual-panel live-update feature with a watchdog timeout and an automatic rollback to the backup image after three consecutive failed boots. Do not exceed 3.6 V on any digital I/O pin; the analog AV+ pin has its own decoupling network and must not be tied directly to VDD without a ferrite bead.
Informations de conformité
RoHS and REACH compliant per Microchip product page. The -I/PF part is industrial grade (not AEC-Q100 qualified); for AEC-Q100 automotive applications select the PIC32MZ1024EFE100-E/PF extended temperature variant or a Q-suffix automotive grade.
