S912ZVHY32F1CLQ - 16-Bit 32MHz Automotive MCU | NXP
N.º de pieza: S912ZVHY32F1CLQ ✓ Activo| Cant. | Precio unitario | Total |
|---|---|---|
| 1 | $1.5934 | $1,59 |
| 10 | $1.5934 | $15,93 |
| 100 | $1.5934 | $159,34 |
| 500 | $1.5934 | $796,70 |
| 1.000 | $1.5934 | $1.593,40 |
S912ZVHY32F1CLQ Descripción general
A microcontroller is a programmable semiconductor system that executes firmware, reads inputs, controls outputs, and coordinates embedded-system functions. The S12Z belongs to the S12 MagniV mixed-signal MCU family, placing a 16-bit core and automotive communications peripherals within the broader microcontroller and embedded-control hierarchy. This combination makes it suitable for dashboard and cluster platforms rather than general-purpose host processing.
The verified product data identifies 32 KB of Flash, a 32 MHz maximum clock, a -40°C to +85°C temperature range, automotive qualification, and a 144-pin QFP package. The integrated CAN and LIN physical layers support vehicle-network connectivity, while the display controller and instrument-gauge drivers reduce the external circuitry needed for cluster applications. The integrated voltage regulator supports power-supply implementation within the MCU platform.
The S12Z core provides a 16-bit processing architecture optimized for embedded control and automotive instrumentation workloads. Its mixed-signal feature set places communication, display, regulation, and gauge-driver functions in one device. Compared with a discrete cluster controller, this integration can reduce board-level component count and simplify firmware integration, although final performance and timing must be evaluated against the complete hardware and software requirements.
Typical applications include entry-level automotive instrument clusters, industrial instrument panels, gauge systems, CAN-connected vehicle nodes, LIN-connected body and dashboard modules, and display-control platforms. The 144-pin package exposes the device's expanded mixed-signal and connectivity resources but requires careful PCB layout and adequate clearance around the fine-pitch leads.
Designers should verify the exact pinout, electrical limits, clocking requirements, external-component recommendations, memory map, and automotive qualification details in the NXP product documentation before layout release. The verified web results identify automotive qualification and temperature grade, but they do not provide the complete electrical timing, memory-map, transceiver-detail, or package-pin data needed to replace them with assumptions.
This page consolidates verified distributor and manufacturer information for the S912ZVHY32F1CLQ and adds application, sourcing, and design context. It is intended as an engineering product reference; unresolved technical parameters remain explicitly marked where the supplied source data is incomplete.
Alternativas directas para S912ZVHY32F1CLQ — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con S912ZVHY32F1CLQ (mismo factor de forma y huella) — difiere en Automotive Qualification, Core Architecture, Operating Temperature, Mounting Type, CAN Physical Layer.
Herramienta de comparación rápida — seleccione piezas alternativas para compararlas lado a lado:
S912ZVLA64F0MLF
✅ Sustitución directa✓ En stock
$2.41 / unidad
Ver hoja de datos →S912ZVFP64F1VLQ
✅ Sustitución directa ⚠️ Especificaciones sin verificar✓ En stock
$7.69 / unidad
Ver hoja de datos →S912XDT256F1VAA
✅ Sustitución directa ⚠️ Especificaciones sin verificar✓ En stock
$13.6 / unidad
Ver hoja de datos →S912XDT384J1MAG
✅ Sustitución directa ⚠️ Especificaciones sin verificar✓ En stock
$7.45 / unidad
Ver hoja de datos →S912XEG384J3VAL
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
S912ZVHY32F1CLQ Valores máximos y características eléctricas
| Core Architecture | 16-bit S12Z core |
| Flash Memory | 32 KB |
| Frecuencia de reloj máxima | 32 MHz |
| Product Family | S12 MagniV mixed-signal MCU |
| Rango de temperatura de funcionamiento | -40°C to +85°C |
| Automotive Qualification | Automotive Qualified |
| Integrated Voltage Regulator | Yes |
| CAN Physical Layer | Yes |
| LIN Physical Layer | Yes |
| Display Controller | Yes |
| Instrument-Gauge Drivers | Yes |
| Package Type | QFP 144 |
| Package Detail | 144-LQFP (20x20) |
| Tipo de montaje | Surface Mount |
| Terminal Count | 144 terminals |
Guía de configuración de pines de S912ZVHY32F1CLQ 144-lqfp (20x20)
Configuración de pines para S912ZVHY32F1CLQ (encapsulado 144-lqfp (20x20)). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para S912ZVHY32F1CLQ.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
S912ZVHY32F1CLQ es adecuado para 6 aplicacións: Entry-Level Automotive Instrument Cluster, Industrial Gauge and Panel Controller, CAN-Connected Vehicle Node, LIN-Connected Dashboard Module, Display-Control Embedded Platform, Mixed-Signal Automotive Embedded Control.
Entry-Level Automotive Instrument Cluster
The S912ZVHY32F1CLQ fits an entry-level automotive instrument cluster because its 32 MHz 16-bit S12Z core can coordinate display, gauge, and vehicle-network functions while operating from -40°C to +85°C. The integrated display controller and instrument-gauge drivers reduce the number of separate peripheral devices needed for a cluster platform. CAN and LIN physical layers support connection to distributed vehicle electronics, allowing the controller to receive vehicle information and drive cluster functions. The 32 KB Flash stores cluster firmware, while the 144-pin QFP provides access to the device's mixed-signal resources. Final qualification should confirm display timing, electrical limits, EMC requirements, and the complete NXP reference design before production release.
Recomendado
Industrial Gauge and Panel Controller
The S912ZVHY32F1CLQ is suitable for an industrial gauge or panel controller where a display, measurement front end, and network interface are combined in one embedded platform. Its 16-bit S12Z core provides a dedicated control processor, while the integrated voltage regulator and instrument-gauge drivers simplify system partitioning. The CAN and LIN physical layers can connect the panel to broader industrial or vehicle-like networks, depending on the external transceiver and application requirements. The -40°C to +85°C temperature specification supports equipment beyond room-temperature conditions. Because the supplied source data does not specify ADC channels, display resolution, or memory beyond Flash, the MCU should be validated against the panel's sensor, display, update-rate, and communications requirements.
Recomendado
CAN-Connected Vehicle Node
The S912ZVHY32F1CLQ can serve as the control element in a CAN-connected vehicle node because the verified product description identifies an integrated CAN physical layer and a 32 MHz 16-bit core. The MCU can execute control firmware from its 32 KB Flash while coordinating sensor inputs, actuator outputs, diagnostics, and network communication. Its -40°C to +85°C range and automotive-qualified status are relevant to vehicle environments. The exact transceiver interface, CAN protocol support, termination requirements, and pin assignments must be taken from the official NXP documentation. A production design should also verify wake-up behavior, fault handling, ESD protection, EMC performance, and supply requirements rather than inferring them from the distributor summaries.
Recomendado
LIN-Connected Dashboard Module
The S912ZVHY32F1CLQ is appropriate for a LIN-connected dashboard module because the device integrates a LIN physical layer alongside its 16-bit S12Z processor and display-oriented peripherals. A module can use the MCU to consolidate distributed switch or sensor inputs, update gauges, and communicate with other dashboard nodes. The 32 KB Flash provides a defined firmware-storage resource, and the 32 MHz clock supports deterministic embedded control tasks. The integrated CAN interface can allow the same controller to bridge or manage multiple vehicle-network domains, but the actual network topology depends on external transceivers and board-level termination. Verify LIN baud-rate support, transceiver connection, timing, watchdog behavior, and the exact QFP pinout in the NXP documentation.
Recomendado
Display-Control Embedded Platform
The S912ZVHY32F1CLQ can act as a display-control platform for embedded gauge and instrument systems because the verified manufacturer description identifies an integrated display controller and instrument-gauge drivers. This architecture is intended to reduce the discrete circuitry needed around a display and its associated analog or driver functions. The 32 MHz S12Z core can coordinate display updates and vehicle or industrial input processing, while the 32 KB Flash holds application firmware. The 144-pin QFP supplies the package footprint identified for the target, but the supplied sources do not include display resolution, timing, interface, or graphics-memory details. System engineers must therefore verify the display specification and signal mapping directly from NXP documentation before selecting the MCU for a new panel.
Recomendado
Mixed-Signal Automotive Embedded Control
The S912ZVHY32F1CLQ supports mixed-signal automotive embedded-control designs because it combines an S12Z processing core, voltage regulator, CAN and LIN physical layers, display controller, and instrument-gauge drivers. This integration is useful when a vehicle or industrial subsystem must combine network communication, display or gauge output, and local control in one device. Its 16-bit architecture and 32 MHz maximum frequency provide a defined embedded processing platform, while the automotive-qualified status and -40°C to +85°C range support harsh-environment requirements. Designers should not treat the distributor summary as a complete electrical specification: confirm supply voltage, clocking, memory map, peripheral limits, ESD, EMC, and thermal requirements in the official documentation.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para S912ZVHY32F1CLQ — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | S912ZVLA64F0MLF | S912ZVFP64F1VLQ | S912XDT256F1VAA | S912XDT384J1MAG | S912XEG384J3VAL |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
Diferenciadores clave
- Integrated cluster-oriented peripheral set (frente a S912ZVH32F1CLQ family reference)
- Automotive-oriented mixed-signal integration (frente a S912XDT256F1VAA)
- 32 MHz S12Z processing platform (frente a S912ZVH32F1CLQ)
Notas de diseño
Treat the 144-LQFP package as a fine-pitch mixed-signal layout problem. Verify the official land pattern, pin numbering, exposed thermal or power requirements, and assembly rules before routing. Keep CAN and LIN routing away from sensitive display and gauge-driver signals where practical, use short return paths, and provide controlled reference planes. Do not release the PCB footprint from distributor search snippets alone because the supplied data does not include a complete package drawing.
Use the integrated voltage regulator only within the limits and external-component recommendations in the NXP documentation. Confirm the required input range, regulator output, decoupling, load current, startup behavior, and power sequencing for the actual instrument-cluster load. Estimated: if the device's verified operating load is later established as I A and the input-output drop is V V, regulator dissipation is P = I × V; the present source data does not provide I or V, so no numerical thermal estimate is asserted here.
Do not select S912ZVLA64F0MLF or another related S912 device solely because the family name and apparent package count look similar. The supplied cross-reference data does not establish identical pin assignments, Flash size, peripheral configuration, qualification, or electrical limits. Obtain the target and candidate NXP datasheets, compare every power and communication pin, validate firmware and memory compatibility, and bench-test display, CAN, LIN, clocking, and reset behavior before claiming drop-in equivalence.
Evaluate the 144-pin QFP thermally at the maximum intended ambient temperature and worst-case vehicle or industrial loading. The verified source specifies -40°C to +85°C, but it does not provide junction temperature, thermal resistance, or power dissipation values. Calculate total device dissipation from the actual supply and load conditions, then confirm package copper, airflow, and board construction against NXP's thermal data. Do not substitute an unverified thermal resistance or junction-temperature estimate.
Información de cumplimiento
The verified NXP result identifies the device as automotive qualified but does not state RoHS, REACH, lead-free, halogen-free, or conflict-mineral status. AEC-Q100 status is represented as qualified based on the source's automotive-qualified designation, subject to confirmation against the official qualification documentation.
