S9S08DV96F2VLL - 40MHz 96KB Automotive 8-Bit MCU | NXP
N.º de pieza: S9S08DV96F2VLL ✓ Activo| Cant. | Precio unitario | Total |
|---|---|---|
| 1 | $0 | $0,00 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1.000 | $0 | $0,00 |
S9S08DV96F2VLL Descripción general
A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals on one chip. The S9S08DV96F2VLL belongs to the HCS08 family and is positioned as an 8-bit embedded controller rather than a general-purpose computing processor. Its combination of flash program memory, serial communication, embedded debugging, and extended temperature qualification supports applications that require deterministic control and field evaluation.
The verified device data identifies a 40MHz CPU with a 20MHz bus, 96K x 8 flash, support for up to 32 interrupt or reset sources, and embedded CAN communication. The 100-LQFP package provides 100 external leads and is suitable for larger automotive and industrial boards where lead spacing and inspection requirements favor through-hole-style gull-wing packaging over a fine-pitch QFN.
The MCU is marked automotive qualified, and one verified source associates the device with AEC-Q100. Its -40°C to +105°C rating is appropriate for demanding industrial and automotive environments, although the exact electrical limits and timing values should be confirmed in the manufacturer datasheet before design release. The device also appears in distributor listings as both Freescale Semiconductor and NXP USA Inc., reflecting its product-line history rather than a change in the MPN.
Typical uses include automotive body or powertrain-adjacent control modules, CAN-connected industrial controllers, instrumentation, embedded motor-control logic, and 3.3V/5V systems requiring on-chip debug. For design work, preserve the S08 programming model, verify the 100-pin land pattern, connect the required oscillator and reset circuitry, and confirm the exact transceiver, connector, and protection components for the system voltage.
The most important design trade-off is package and qualification rather than core performance. A 100-LQFP footprint is larger than a modern low-pin-count MCU package, but it offers ample external I/O and straightforward assembly. Validate startup behavior, watchdog usage, CAN timing, and thermal exposure against the complete manufacturer documentation before production use.
Alternativas directas para S9S08DV96F2VLL — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con S9S08DV96F2VLL (mismo factor de forma y huella) — difiere en Automotive Qualification, Debug Support, Flash Memory, Operating Temperature, Package.
Herramienta de comparación rápida — seleccione piezas alternativas para compararlas lado a lado:
S9S08DV96F2CLL
✅ Sustitución directa ⚠️ Especificaciones sin verificar✓ En stock
Consulte el precio
Ver hoja de datos →S9S08DV96F2VLL Valores máximos y características eléctricas
| Product Type | 8-bit microcontroller |
| CPU Core | Enhanced HCS08 S08 core |
| Maximum CPU Frequency | 40 MHz |
| Bus Frequency | 20 MHz |
| Flash Memory | 96KB (96K x 8) |
| Tensión de alimentación | 3.3V/5V |
| Temperatura de funcionamiento | -40°C to +105°C |
| Automotive Qualification | Automotive qualified |
| AEC-Q100 Association | AEC-Q100 |
| Encapsulado | 100-LQFP (14x14 mm) |
| Number of Terminals | 100 |
| Terminal Form | Gull wing |
| Embedded Communications | Embedded CAN |
| Embedded EEPROM | Embedded EEPROM |
| Debug Support | On-chip emulation and debug |
| Interrupt and Reset Sources | Up to 32 sources |
| Instruction Set | HC08 instruction set with added BGND instruction |
| Tipo de montaje | Surface mount |
Guía de configuración de pines de S9S08DV96F2VLL 100-lqfp (14x14 mm)
Configuración de pines para S9S08DV96F2VLL (encapsulado 100-lqfp (14x14 mm)). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para S9S08DV96F2VLL.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
S9S08DV96F2VLL es adecuado para 6 aplicacións: Automotive CAN Control Module, Industrial Embedded Controller, Body Electronics Module, Instrumentation and Measurement, Motor and Actuator Control, Diagnostic and Service Interface.
Automotive CAN Control Module
The S9S08DV96F2VLL fits a CAN-connected automotive controller because the verified data identifies embedded CAN, an enhanced HCS08 8-bit core, 96KB flash, and operation from -40°C to +105°C. Place the MCU behind a qualified CAN transceiver, termination network, reverse-battery protection, surge protection, and automotive-compatible power regulation. Its 40MHz CPU supports deterministic control and communication tasks, while the 100-LQFP package provides ample external pins for sensor inputs and actuator outputs. Firmware must be validated for reset behavior, bus fault handling, timing margins, and the exact peripheral map in the manufacturer datasheet.
Recomendado
Industrial Embedded Controller
The S9S08DV96F2VLL is suitable for an industrial embedded controller when the system needs 8-bit deterministic control, 96KB flash, embedded EEPROM, and on-chip emulation. The verified 3.3V/5V operation and -40°C to +105°C range support a broad range of industrial boards, subject to the exact electrical limits in the datasheet. Use the 100-LQFP footprint for reliable assembly and inspection, connect the required clock and reset circuitry, and isolate external I/O with appropriate protection. The MCU can supervise sensors, drive discrete outputs, and manage a CAN network without the overhead of a higher-bit processor.
Recomendado
Body Electronics Module
The S9S08DV96F2VLL can serve as the central controller in an automotive body-electronics module because it combines a 40MHz HCS08 core with embedded CAN and 96KB flash. Its verified -40°C to +105°C rating makes it a candidate for harsh vehicle environments, while the 100-LQFP package provides a generous number of pins for switch inputs, lamp outputs, and diagnostic interfaces. Add a qualified automotive transceiver and robust input/output protection rather than driving loads directly from MCU pins. Validate sleep behavior, wake-up sources, watchdog strategy, brownout response, and diagnostic fault reporting before production qualification.
Recomendado
Instrumentation and Measurement
The S9S08DV96F2VLL can support instrumentation products that require local measurement control, nonvolatile firmware storage, and an available on-chip debug path. The verified 96KB flash supports embedded application code, while embedded EEPROM can retain configuration or calibration data; however, its exact capacity must be confirmed before allocation. The 40MHz core is appropriate for signal acquisition sequencing and user-interface control when the timing chain is designed around the actual datasheet limits. Use clean grounding, short analog paths, and separate digital returns, and verify the MCU's ADC or timer resources against the complete datasheet.
Recomendado
Motor and Actuator Control
The S9S08DV96F2VLL is a reasonable control-core candidate for actuator or motor-related subsystems that need deterministic 8-bit logic, embedded CAN communication, and EEPROM storage. The verified 40MHz CPU frequency provides timing headroom for state-machine control and supervisory functions, but it does not replace a dedicated motor-driver or power stage. Connect the MCU to gate drivers, current sensing, and protection circuits rather than to high-current motor terminals. Validate PWM, timer, ADC, watchdog, and fault-handling resources from the full datasheet, and perform thermal and transient testing across the required -40°C to +105°C environment.
Recomendado
Diagnostic and Service Interface
The S9S08DV96F2VLL can participate in a diagnostic interface because the verified data identifies on-chip emulation and debug, embedded CAN, and an automotive-oriented 8-bit architecture. A service node can receive vehicle messages, manage operating modes, record faults, and coordinate controlled outputs while retaining firmware in 96KB flash. The 100-LQFP package supports separate CAN, power, ground, reset, and service-test routing, but the exact signal names and alternate-function multiplexing must be verified in the complete pinout. Add galvanic isolation or protected interfaces where required by the vehicle architecture.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para S9S08DV96F2VLL — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | S9S08DV96F2CLL |
|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors |
Diferenciadores clave
- Integrated automotive-oriented control feature set (frente a S9S08DV96F2CLL)
- 40MHz HCS08 performance with embedded CAN (frente a S9S08DV96F2CLL)
- 96KB flash for embedded firmware (frente a S9S08DV96F2CLL)
Notas de diseño
Design the 3.3V/5V supply path around the exact absolute maximum and operating limits in the manufacturer datasheet. The supplied data confirms 3.3V/5V operation but does not provide core current, regulator dropout, or decoupling values. Place bulk and high-frequency decoupling close to the device supply pins, keep return paths short, and include a regulator with adequate transient margin for the 100-LQFP device. Validate brownout behavior during startup and load transients rather than assuming nominal supply voltage is sufficient.
Use the exact 100-LQFP land pattern and verify pin 1 orientation mechanically before routing. The verified data identifies a 100-terminal gull-wing package but does not provide a complete pin mapping, so do not infer pins from generic HCS08 devices. Route oscillator, reset, debug, and CAN-related lines according to the manufacturer reference layout, keep sensitive analog and clock paths away from switching nodes, and provide adequate ground-plane continuity around the package. Perform assembly and inspection checks for the 0.5 mm-class lead pitch only after confirming the actual drawing.
Do not substitute S9S08DV96F2VLL based only on the words 8-bit, 40 MHz, or 96KB. A valid replacement must also preserve the S08 instruction and memory compatibility, CAN peripheral behavior, reset and debug arrangement, clock configuration, supply levels, 100-LQFP pinout, automotive qualification, and -40°C to +105°C operating range. The S9S08DV96F2CLL site-MPN candidate is not confirmed as drop-in from the supplied evidence, so mark its differences as [DATA_NEEDED] until the manufacturer ordering table is checked.
Información de cumplimiento
The verified technical listing associates S9S08DV96F2VLL with AEC-Q100 and identifies it as automotive qualified. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status are not stated in the supplied verified data.