S9S08DV96F2VLL - 40MHz 96KB Automotive 8-Bit MCU | NXP
부품 번호: S9S08DV96F2VLL ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
S9S08DV96F2VLL 개요
A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals on one chip. The S9S08DV96F2VLL belongs to the HCS08 family and is positioned as an 8-bit embedded controller rather than a general-purpose computing processor. Its combination of flash program memory, serial communication, embedded debugging, and extended temperature qualification supports applications that require deterministic control and field evaluation.
The verified device data identifies a 40MHz CPU with a 20MHz bus, 96K x 8 flash, support for up to 32 interrupt or reset sources, and embedded CAN communication. The 100-LQFP package provides 100 external leads and is suitable for larger automotive and industrial boards where lead spacing and inspection requirements favor through-hole-style gull-wing packaging over a fine-pitch QFN.
The MCU is marked automotive qualified, and one verified source associates the device with AEC-Q100. Its -40°C to +105°C rating is appropriate for demanding industrial and automotive environments, although the exact electrical limits and timing values should be confirmed in the manufacturer datasheet before design release. The device also appears in distributor listings as both Freescale Semiconductor and NXP USA Inc., reflecting its product-line history rather than a change in the MPN.
Typical uses include automotive body or powertrain-adjacent control modules, CAN-connected industrial controllers, instrumentation, embedded motor-control logic, and 3.3V/5V systems requiring on-chip debug. For design work, preserve the S08 programming model, verify the 100-pin land pattern, connect the required oscillator and reset circuitry, and confirm the exact transceiver, connector, and protection components for the system voltage.
The most important design trade-off is package and qualification rather than core performance. A 100-LQFP footprint is larger than a modern low-pin-count MCU package, but it offers ample external I/O and straightforward assembly. Validate startup behavior, watchdog usage, CAN timing, and thermal exposure against the complete manufacturer documentation before production use.
드롭인 대체품: S9S08DV96F2VLL — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: S9S08DV96F2VLL (동일 폼 팩터 및 풋프린트) — 차이점: Automotive Qualification, Debug Support, Flash Memory, Operating Temperature, Package.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
S9S08DV96F2CLL
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
가격 문의
데이터시트 보기 →S9S08DV96F2VLL 최대 정격 & 전기적 특성
| Product Type | 8-bit microcontroller |
| CPU Core | Enhanced HCS08 S08 core |
| Maximum CPU Frequency | 40 MHz |
| Bus Frequency | 20 MHz |
| Flash Memory | 96KB (96K x 8) |
| 공급 전압 | 3.3V/5V |
| 동작 온도 | -40°C to +105°C |
| Automotive Qualification | Automotive qualified |
| AEC-Q100 Association | AEC-Q100 |
| 패키지 | 100-LQFP (14x14 mm) |
| Number of Terminals | 100 |
| Terminal Form | Gull wing |
| Embedded Communications | Embedded CAN |
| Embedded EEPROM | Embedded EEPROM |
| Debug Support | On-chip emulation and debug |
| Interrupt and Reset Sources | Up to 32 sources |
| Instruction Set | HC08 instruction set with added BGND instruction |
| 실장 유형 | Surface mount |
S9S08DV96F2VLL 100-lqfp (14x14 mm) 핀 구성 가이드
S9S08DV96F2VLL(100-lqfp (14x14 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: S9S08DV96F2VLL.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
S9S08DV96F2VLL 적합 용도: 6 애플리케이션s: Automotive CAN Control Module, Industrial Embedded Controller, Body Electronics Module, Instrumentation and Measurement, Motor and Actuator Control, Diagnostic and Service Interface.
Automotive CAN Control Module
The S9S08DV96F2VLL fits a CAN-connected automotive controller because the verified data identifies embedded CAN, an enhanced HCS08 8-bit core, 96KB flash, and operation from -40°C to +105°C. Place the MCU behind a qualified CAN transceiver, termination network, reverse-battery protection, surge protection, and automotive-compatible power regulation. Its 40MHz CPU supports deterministic control and communication tasks, while the 100-LQFP package provides ample external pins for sensor inputs and actuator outputs. Firmware must be validated for reset behavior, bus fault handling, timing margins, and the exact peripheral map in the manufacturer datasheet.
추천
Industrial Embedded Controller
The S9S08DV96F2VLL is suitable for an industrial embedded controller when the system needs 8-bit deterministic control, 96KB flash, embedded EEPROM, and on-chip emulation. The verified 3.3V/5V operation and -40°C to +105°C range support a broad range of industrial boards, subject to the exact electrical limits in the datasheet. Use the 100-LQFP footprint for reliable assembly and inspection, connect the required clock and reset circuitry, and isolate external I/O with appropriate protection. The MCU can supervise sensors, drive discrete outputs, and manage a CAN network without the overhead of a higher-bit processor.
추천
Body Electronics Module
The S9S08DV96F2VLL can serve as the central controller in an automotive body-electronics module because it combines a 40MHz HCS08 core with embedded CAN and 96KB flash. Its verified -40°C to +105°C rating makes it a candidate for harsh vehicle environments, while the 100-LQFP package provides a generous number of pins for switch inputs, lamp outputs, and diagnostic interfaces. Add a qualified automotive transceiver and robust input/output protection rather than driving loads directly from MCU pins. Validate sleep behavior, wake-up sources, watchdog strategy, brownout response, and diagnostic fault reporting before production qualification.
추천
Instrumentation and Measurement
The S9S08DV96F2VLL can support instrumentation products that require local measurement control, nonvolatile firmware storage, and an available on-chip debug path. The verified 96KB flash supports embedded application code, while embedded EEPROM can retain configuration or calibration data; however, its exact capacity must be confirmed before allocation. The 40MHz core is appropriate for signal acquisition sequencing and user-interface control when the timing chain is designed around the actual datasheet limits. Use clean grounding, short analog paths, and separate digital returns, and verify the MCU's ADC or timer resources against the complete datasheet.
추천
Motor and Actuator Control
The S9S08DV96F2VLL is a reasonable control-core candidate for actuator or motor-related subsystems that need deterministic 8-bit logic, embedded CAN communication, and EEPROM storage. The verified 40MHz CPU frequency provides timing headroom for state-machine control and supervisory functions, but it does not replace a dedicated motor-driver or power stage. Connect the MCU to gate drivers, current sensing, and protection circuits rather than to high-current motor terminals. Validate PWM, timer, ADC, watchdog, and fault-handling resources from the full datasheet, and perform thermal and transient testing across the required -40°C to +105°C environment.
추천
Diagnostic and Service Interface
The S9S08DV96F2VLL can participate in a diagnostic interface because the verified data identifies on-chip emulation and debug, embedded CAN, and an automotive-oriented 8-bit architecture. A service node can receive vehicle messages, manage operating modes, record faults, and coordinate controlled outputs while retaining firmware in 96KB flash. The 100-LQFP package supports separate CAN, power, ground, reset, and service-test routing, but the exact signal names and alternate-function multiplexing must be verified in the complete pinout. Add galvanic isolation or protected interfaces where required by the vehicle architecture.
추천
추천 제품 요약
엔지니어링 참조 데이터: S9S08DV96F2VLL — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | S9S08DV96F2CLL |
|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors |
주요 차별점
- Integrated automotive-oriented control feature set (vs S9S08DV96F2CLL)
- 40MHz HCS08 performance with embedded CAN (vs S9S08DV96F2CLL)
- 96KB flash for embedded firmware (vs S9S08DV96F2CLL)
설계 노트
Design the 3.3V/5V supply path around the exact absolute maximum and operating limits in the manufacturer datasheet. The supplied data confirms 3.3V/5V operation but does not provide core current, regulator dropout, or decoupling values. Place bulk and high-frequency decoupling close to the device supply pins, keep return paths short, and include a regulator with adequate transient margin for the 100-LQFP device. Validate brownout behavior during startup and load transients rather than assuming nominal supply voltage is sufficient.
Use the exact 100-LQFP land pattern and verify pin 1 orientation mechanically before routing. The verified data identifies a 100-terminal gull-wing package but does not provide a complete pin mapping, so do not infer pins from generic HCS08 devices. Route oscillator, reset, debug, and CAN-related lines according to the manufacturer reference layout, keep sensitive analog and clock paths away from switching nodes, and provide adequate ground-plane continuity around the package. Perform assembly and inspection checks for the 0.5 mm-class lead pitch only after confirming the actual drawing.
Do not substitute S9S08DV96F2VLL based only on the words 8-bit, 40 MHz, or 96KB. A valid replacement must also preserve the S08 instruction and memory compatibility, CAN peripheral behavior, reset and debug arrangement, clock configuration, supply levels, 100-LQFP pinout, automotive qualification, and -40°C to +105°C operating range. The S9S08DV96F2CLL site-MPN candidate is not confirmed as drop-in from the supplied evidence, so mark its differences as [DATA_NEEDED] until the manufacturer ordering table is checked.
규정 준수 정보
The verified technical listing associates S9S08DV96F2VLL with AEC-Q100 and identifies it as automotive qualified. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status are not stated in the supplied verified data.