Texas Instruments

SN75114N - Dual Differential Line Driver, 5 V | Texas Instruments

N.º de pieza: SN75114N ✓ Activo
5 V Vdss 40 mA Id 16-pin PDIP Package
MOQ: 1 |

SN75114N Descripción general

Texas Instruments SN75114N is a dual differential line driver designed for 5 V systems, with a 16-pin PDIP package and output current rated up to 40 mA. The device generates differential outputs for balanced lines such as twisted-pair interconnects while maintaining TTL-compatible output levels. Its two driver channels provide separate sink outputs and corresponding active pull-up terminals for flexible output configurations.

A differential line driver is an interface IC that converts logic-level signals into complementary differential outputs suitable for balanced interconnects. This device belongs to the line-driver hierarchy within interface ICs, where it can drive twisted-pair circuits more effectively than an ordinary single-ended logic output. It also supports applications beyond conventional differential transmission, including TTL expanders and phase splitters.

The SN75114N offers two differential driver channels, 5 V operation, TTL-compatible outputs, and a maximum output current of 40 mA per the manufacturer documentation. Sink outputs labeled YS and ZS operate alongside active pull-up terminals labeled YP and ZP on adjacent package pins. This arrangement allows the output stage to be configured according to the signaling requirements and loading of the balanced line.

The output architecture resembles a TTL totem-pole output, but the separation of sink and active pull-up terminals provides additional routing flexibility. These terminals can be used independently when the interface requires different drive arrangements. Designers should account for output rise and fall times, propagation delay, and the allowable loading when driving long cables or slow logic inputs.

Typical uses include balanced digital data links, differential clock distribution, TTL bus expansion, and phase-splitting circuits. The device is particularly useful when a system needs stronger source current than standard logic gates can provide while retaining TTL-compatible signal levels. Keeping the differential return path close to the signal conductors helps reduce susceptibility to common-mode noise.

For PCB implementation, place the device close to the driven line and route each differential conductor as a compact pair. Avoid long stubs, maintain a continuous ground reference, and terminate the line according to its impedance and topology. Verify output current, cable length, logic thresholds, and timing margins under the intended temperature and supply conditions.

This product page combines the manufacturer's core electrical and functional information with package-level design guidance, replacement analysis, application examples, and engineering-focused comparison criteria. These supporting sections help engineers distinguish exact family alternatives from broader RS-422, RS-485, and differential-interface devices that may use different packages or logic levels.

Alternativas directas para SN75114N — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

SN55114N

✅ Sustitución directa ⚠️ Especificaciones sin verificar
📦 PDIP-16
Same 16-pin PDIP footprint and dual differential-driver function; the family designation changes the temperature grade, while output current remains 40 mA

📋 Alternativa de referencia (no en el catálogo)

SN75114P

✅ Sustitución directa ⚠️ Especificaciones sin verificar
📦 PDIP-16
Same 16-pin PDIP footprint, 5 V supply, 40 mA output rating, and differential-driver function; the P suffix denotes a different temperature grade

📋 Alternativa de referencia (no en el catálogo)

SN75114D

✅ Sustitución directa ⚠️ Especificaciones sin verificar
Texas Instruments
📦 PDIP-16
Dual differential line driver · 2 · 4.75 V to 5.25 V · 0 °C to +70 °C · 16-pin SOIC · SOP · Gull wing · 16

Consulte el precio

Ver hoja de datos →

SN75114N Especificaciones

Product Type Dual differential line driver
Number of Driver Channels 2 channels
Tensión de alimentación 5 V
Corriente de salida máxima 40 mA
Logic Compatibility TTL-compatible outputs
Output Architecture Totem-pole-like output with separate sink and active pull-up terminals
Sink Output Terminals YS and ZS
Active Pull-Up Terminals YP and ZP
Package Type 16-pin PDIP
Recuento de pines 16 pins
Tipo de montaje Through-hole
Recommended Balanced-Line Use Twisted-pair differential interconnects
Additional Supported Functions TTL expander and phase splitter

Guía de configuración de pines de SN75114N 16-pin pdip

Configuración de pines para SN75114N (encapsulado 16-pin pdip). La numeración de pines, las funciones y los diagramas de conexión se definen en la hoja de datos del fabricante. Consúltela para conocer el footprint exacto y las directrices de soldadura.

Diagrama de patillaje del encapsulado 16-pin pdip para SN75114N

No hay datos detallados de patillaje disponibles para SN75114N.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

SN75114N es adecuado para 6 aplicacións: Balanced Digital Data Links, Differential Clock Distribution, TTL Bus Expansion, Phase-Splitting Circuits, Industrial Control Signal Interfaces, Legacy Computer Peripherals.

🌐

Balanced Digital Data Links

The SN75114N is suitable for transmitting two balanced digital channels over twisted-pair wiring in a 5 V TTL-based system. Each channel uses complementary differential outputs, and the device can source up to 40 mA according to the Texas Instruments SN75114 datasheet, Rev. C. Keeping signal and return conductors together improves noise rejection compared with an unbalanced arrangement. The designer should verify line impedance, logic thresholds, propagation delay, and output loading against the receiver before deployment.

🖥️

Differential Clock Distribution

The two channels of the SN75114N can distribute complementary clock signals to TTL-compatible logic when a controlled, low-skew connection is required. Its 5 V supply and 40 mA maximum output current make it suitable for conventional TTL clock networks with suitable loading. Board-level routing should use short, symmetrical branches, a continuous ground reference, and termination selected from the actual clock impedance. Rise time, fall time, and maximum operating frequency should be checked in the final timing analysis.

🔧

TTL Bus Expansion

The SN75114N can expand a TTL interface because its output stages provide TTL-compatible levels and up to 40 mA of source current. The Texas Instruments SN75114 datasheet, Rev. C, specifically identifies TTL-expander operation in addition to balanced-line driving. This makes the device useful when additional logic drive is needed without moving to a higher-voltage ECL interface. Each output must remain within its current limit, and the total fan-out, load capacitance, and propagation delay of the expanded bus require verification.

⚡

Phase-Splitting Circuits

The SN75114N's dual output arrangement supports phase splitting, allowing a signal to be converted into complementary outputs for balanced downstream circuitry. The manufacturer identifies phase splitting as a supported use for the SN75114 family, whose output stages combine TTL-compatible levels with separate sink and active pull-up access. A phase-sensitive design should examine propagation-delay skew between the complementary outputs and the receiving circuit. The 40 mA output limit and TTL loading rules must also remain within the device limits.

🏭

Industrial Control Signal Interfaces

The SN75114N can drive balanced control or data lines between circuit cards in a 5 V industrial control system when the equipment's environmental grade permits. Its dual-channel organization reduces the number of line-driver packages needed, while the 40 mA output capability provides stronger drive than conventional logic gates. For reliable operation, route each differential pair over a common ground reference, protect exposed cables against surge and ESD, and confirm that the selected SN75114 suffix supports the enclosure's temperature range.

💻

Legacy Computer Peripherals

The SN75114N fits legacy TTL systems that need differential drive for twisted-pair cables or point-to-point interconnections. Its 5 V supply, TTL-compatible output levels, and dual channels suit equipment built around conventional bipolar TTL logic. Through-hole PDIP construction also simplifies repair and prototype work in older control systems. Integration still requires checking the original bus topology, cable length, termination, grounding arrangement, and whether a modern RS-422 or RS-485 transceiver is required for regulatory or cable-length reasons.

Resumen de productos recomendados

SN75114N Texas Instruments Se usa en: Balanced Digital Data Links, Differential Clock Distribution, TTL Bus Expansion, Phase-Splitting Circuits, Industrial Control Signal Interfaces, Legacy Computer Peripherals SN75114P Temperature-grade family alternative Se usa en: Balanced Digital Data Links, Phase-Splitting Circuits, Industrial Control Signal Interfaces SN55114N Same-family extended-temperature option Se usa en: Differential Clock Distribution, Legacy Computer Peripherals SN75114D Texas Instruments Se usa en: TTL Bus Expansion
What is the SN75114N?
The SN75114N is a Texas Instruments dual differential line driver operating from a 5 V supply. According to the Texas Instruments SN75114 datasheet, Rev. C, it provides two channels for driving balanced lines such as twisted pair and can deliver up to 40 mA output current. The device is packaged in a 16-pin PDIP and also supports TTL expander and phase-splitter configurations.
How many differential driver channels does the SN75114N have?
The SN75114N contains two differential driver channels. The Texas Instruments SN75114 datasheet, Rev. C, identifies separate Y and Z signal paths, with sink terminals YS and ZS and corresponding active pull-up terminals YP and ZP. This two-channel arrangement allows one IC to serve two balanced interconnects or to implement differential and phase-splitting functions in a single through-hole package.
What supply voltage does the SN75114N use?
The SN75114N is designed for a 5 V supply. The Texas Instruments SN75114 datasheet, Rev. C, identifies the SN75114 as the 5 V member of the SN55114 and SN75114 family. Because the output stages are TTL-compatible, the device is intended for conventional TTL-level systems whose input thresholds and supply arrangement are compatible with the SN75114N.
What is the maximum output current of the SN75114N?
The SN75114N is rated for up to 40 mA output current. According to the Texas Instruments SN75114 datasheet, Rev. C, its output stages provide the current needed to drive balanced lines at normal line impedances without excessive power dissipation. The actual channel current must remain within the device limits and should also satisfy the load, cable, and logic-threshold requirements of the connected circuit.
Where can I download the SN75114N datasheet PDF?
The SN75114N datasheet PDF is available from Texas Instruments through the manufacturer link for the SN55114/SN75114 family. The document is identified as the Dual Differential Line Drivers datasheet, Rev. C. Use the manufacturer PDF for the final pin-description table, electrical characteristics, timing limits, and operating conditions before releasing a PCB or production design.
Where can I find the SN75114N pinout?
The SN75114N pinout is shown in the pin-configuration and pin-description sections of the Texas Instruments SN75114 datasheet, Rev. C. The component uses a 16-pin PDIP and includes enable inputs, differential output terminals, and separated YS/YS plus YP/ZP pull-up connections. Use the numbered diagram from the manufacturer document when assigning PCB holes and net labels.
Can the SN75114N drive a twisted-pair cable?
Yes, the SN75114N is designed to drive balanced lines such as twisted pair. According to the Texas Instruments SN75114 datasheet, Rev. C, its differential output stages can supply up to 40 mA while operating from 5 V. Cable length, data rate, impedance, loading, termination, and return-path geometry must still be evaluated because those system variables determine whether the link operates reliably.
Can the SN75114N be used as a TTL expander?
Yes, the SN75114N can function as a TTL expander because its output stages provide TTL-compatible levels. The Texas Instruments SN75114 datasheet, Rev. C, explicitly identifies TTL-expander and phase-splitter use in addition to differential line driving. Confirm that the chosen output configuration meets the fan-out and timing requirements of every connected TTL input.
What can replace the SN75114N?
The closest same-family replacements are the Texas Instruments SN55114N, SN75114P, and SN75114D when their temperature grades meet the design requirements. All use the same 16-pin PDIP family arrangement, but suffix and temperature-range differences must be checked against the original system requirements. The Texas Instruments SN75114 datasheet, Rev. C, should be used to verify pin and electrical compatibility.
Is SN75114N the same as SN75114P?
The SN75114N and SN75114P belong to the same SN75114 family and use the same 16-pin PDIP arrangement, but their temperature-grade suffixes can represent different environmental requirements. The SN75114N is the standard commercial-temperature selection, while the SN75114P is associated with an extended-temperature grade. Choose the suffix whose operating range matches the deployed equipment.
SN75114N vs SN75114P — which is better for industrial equipment?
The SN75114P is generally the better choice when industrial equipment requires an extended-temperature SN75114-family option, while the SN75114N fits designs whose ambient range stays within the standard commercial grade. Both provide the same dual differential driver function and 16-pin PDIP footprint. Final selection should compare the operating-temperature limits, production status, and qualification needs for the target enclosure.
When should I choose SN75114N instead of a general-purpose differential driver?
Choose the SN75114N when the circuit specifically requires its 5 V TTL-compatible differential outputs, separate sink outputs, adjacent active pull-up terminals, and 40 mA source-current capability. A general-purpose differential driver may be necessary for RS-422 or RS-485 compliance, different supply voltage, isolation, or a smaller surface-mount package. The required protocol and logic thresholds must drive the choice.
Is the SN75114N suitable for a differential clock distribution circuit?
The SN75114N can be suitable for a short, controlled differential clock-distribution circuit because it provides two differential channels with TTL-compatible outputs. According to the Texas Instruments SN75114 datasheet, Rev. C, the device can deliver up to 40 mA. Verify rise and fall times, load capacitance, clock frequency, return-path continuity, and termination against the receiving device before deployment.
Where can I buy SN75114N online and what is the price?
The SN75114N can be requested through the Request a Quote form on this product page. Current pricing, quantity availability, and lead time should be confirmed with XAIPART when the order is placed. The manufacturer product page identifies the device as a dual differential line driver, while the technical PDF and product-page links provide the information needed for qualification.
What is the lead time and stock status for SN75114N?
Current SN75114N stock, minimum order quantity, and lead time should be confirmed through the Request a Quote form on this page. The manufacturer lists SN75114 as an orderable product, but current channel inventory can vary by package suffix and quantity. Providing the required quantity, target date, and delivery location allows XAIPART to return an actionable supply confirmation.

Datos de referencia de ingeniería para SN75114N — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose the SN75114N for a new 5 V TTL system that needs two differential line-driver channels, TTL-compatible outputs, and up to 40 mA per output in a 16-pin PDIP package. Select SN75114P when the system requires the corresponding extended-temperature SN75114 grade, or SN55114N when the military-temperature family designation is appropriate. SN75114D provides another same-footprint family option for a different temperature grade. None of these suffix changes adds a new protocol or logic family, so temperature requirements, lifecycle status, and timing specifications should guide the final choice. If the interface must satisfy RS-422, RS-485, isolation, higher-voltage operation, or compact surface-mount packaging, use a transceiver designed for those requirements instead of treating a generic differential driver as a drop-in replacement.

Comparación con alternativas

Parámetro Este producto SN55114N SN75114P SN75114D
Package PDIP-16 PDIP-16 PDIP-16 PDIP-16
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Product Type Dual differential line driver Dual differential line driver Dual differential line driver Dual differential line driver
Supply Voltage 5 V 5 V 5 V 5 V
Maximum Output Current 40 mA 40 mA 40 mA 40 mA
Number of Driver Channels 2 channels 2 channels 2 channels 2 channels
Logic Compatibility TTL-compatible outputs TTL-compatible outputs TTL-compatible outputs TTL-compatible outputs
Specialized Functions TTL expander and phase splitter TTL expander and phase splitter TTL expander and phase splitter TTL expander and phase splitter

Diferenciadores clave

  • Retains the original dual-channel interface while changing temperature grade (frente a SN75114P)
  • Provides a same-family military-temperature option (frente a SN55114N)
  • Maintains pin-compatible family sourcing across three temperature designations (frente a SN75114D)

Notas de diseño

Route each differential signal as a pair over a continuous ground plane or ground reference. Keep the driver close to the cable or board-to-board interface, minimize stub branches, and avoid introducing unmatched impedance between the complementary outputs. The separate YS and ZS sink terminals and adjacent YP and ZP pull-up terminals should be connected according to the manufacturer's output-configuration diagram rather than treated as interchangeable pins.

Treat the SN75114N as a 5 V TTL interface rather than as a general-purpose RS-422 or RS-485 transceiver. Verify output levels against the receiver thresholds, check the 40 mA current limit under worst-case loading, and confirm propagation-delay and transition-time requirements for the intended bit rate. Cable length and termination should be calculated from the actual line impedance rather than copied from an unrelated communications standard.

Place the device's supply decoupling close to the package and use the manufacturer-recommended network when one is specified. Check each output separately for DC and capacitive loading because the 40 mA rating applies to the output stage rather than to an unlimited number of downstream devices. Account for rise and fall times, clock or data frequency, and simultaneous switching of both channels when evaluating supply noise and ground bounce.

Do not substitute a generic differential transceiver solely because it has a similar pin count. RS-422 and RS-485 devices may use different supply voltages, logic thresholds, enable structures, termination methods, and output-current limits. A valid replacement must match the 16-pin PDIP footprint, 5 V supply, TTL output levels, channel count, and required timing. Verify the production status and environmental grade of the selected suffix before release.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The manufacturer product page and datasheet identify the SN75114 family, but no explicit environmental or substance-compliance declarations were included in the retrieved records.

Búsquedas relacionadas

SN75114N datasheet SN75114N pinout SN75114N datasheet pdf SN75114N replacement SN75114N equivalent SN75114N cross reference SN75114N vs SN75114P SN75114N application circuit SN75114N TTL line driver SN75114N PDIP-16 Texas Instruments SN75114N SN75114N price

Componentes & términos relacionados

Texas Instruments SN75114N SN75114 SN55114N SN75114P SN75114D dual differential line driver differential line driver line driver interface IC balanced line twisted-pair interconnect TTL-compatible output totem-pole output sink output active pull-up terminal TTL expander phase splitter 5 V logic 40 mA output current PDIP-16 DIP package through-hole package RS-422 interface RS-485 interface
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ