SN75114N - Dual Differential Line Driver, 5 V | Texas Instruments
MPN: SN75114N ✓ Hoạt độngSN75114N Tóm tắt
A differential line driver is an interface IC that converts logic-level signals into complementary differential outputs suitable for balanced interconnects. This device belongs to the line-driver hierarchy within interface ICs, where it can drive twisted-pair circuits more effectively than an ordinary single-ended logic output. It also supports applications beyond conventional differential transmission, including TTL expanders and phase splitters.
The SN75114N offers two differential driver channels, 5 V operation, TTL-compatible outputs, and a maximum output current of 40 mA per the manufacturer documentation. Sink outputs labeled YS and ZS operate alongside active pull-up terminals labeled YP and ZP on adjacent package pins. This arrangement allows the output stage to be configured according to the signaling requirements and loading of the balanced line.
The output architecture resembles a TTL totem-pole output, but the separation of sink and active pull-up terminals provides additional routing flexibility. These terminals can be used independently when the interface requires different drive arrangements. Designers should account for output rise and fall times, propagation delay, and the allowable loading when driving long cables or slow logic inputs.
Typical uses include balanced digital data links, differential clock distribution, TTL bus expansion, and phase-splitting circuits. The device is particularly useful when a system needs stronger source current than standard logic gates can provide while retaining TTL-compatible signal levels. Keeping the differential return path close to the signal conductors helps reduce susceptibility to common-mode noise.
For PCB implementation, place the device close to the driven line and route each differential conductor as a compact pair. Avoid long stubs, maintain a continuous ground reference, and terminate the line according to its impedance and topology. Verify output current, cable length, logic thresholds, and timing margins under the intended temperature and supply conditions.
This product page combines the manufacturer's core electrical and functional information with package-level design guidance, replacement analysis, application examples, and engineering-focused comparison criteria. These supporting sections help engineers distinguish exact family alternatives from broader RS-422, RS-485, and differential-interface devices that may use different packages or logic levels.
Bộ thay thế dễ dàng lắp đặt cho SN75114N — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
SN55114N
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
SN75114P
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
SN75114D
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →SN75114N Thông số kỹ thuật
| Product Type | Dual differential line driver |
| Number of Driver Channels | 2 channels |
| Điện áp cung cấp | 5 V |
| Điện áp tối đa đầu ra | 40 mA |
| Logic Compatibility | TTL-compatible outputs |
| Output Architecture | Totem-pole-like output with separate sink and active pull-up terminals |
| Sink Output Terminals | YS and ZS |
| Active Pull-Up Terminals | YP and ZP |
| Package Type | 16-pin PDIP |
| Số chân | 16 pins |
| Kiểu lắp đặt | Through-hole |
| Recommended Balanced-Line Use | Twisted-pair differential interconnects |
| Additional Supported Functions | TTL expander and phase splitter |
Hướng dẫn cấu hình chân SN75114N 16-pin pdip
Cấu hình chân cho SN75114N (16-pin pdip gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho SN75114N.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
SN75114N phù hợp cho 6 Áp dụngs: Balanced Digital Data Links, Differential Clock Distribution, TTL Bus Expansion, Phase-Splitting Circuits, Industrial Control Signal Interfaces, Legacy Computer Peripherals.
Balanced Digital Data Links
The SN75114N is suitable for transmitting two balanced digital channels over twisted-pair wiring in a 5 V TTL-based system. Each channel uses complementary differential outputs, and the device can source up to 40 mA according to the Texas Instruments SN75114 datasheet, Rev. C. Keeping signal and return conductors together improves noise rejection compared with an unbalanced arrangement. The designer should verify line impedance, logic thresholds, propagation delay, and output loading against the receiver before deployment.
Được đề xuất
Differential Clock Distribution
The two channels of the SN75114N can distribute complementary clock signals to TTL-compatible logic when a controlled, low-skew connection is required. Its 5 V supply and 40 mA maximum output current make it suitable for conventional TTL clock networks with suitable loading. Board-level routing should use short, symmetrical branches, a continuous ground reference, and termination selected from the actual clock impedance. Rise time, fall time, and maximum operating frequency should be checked in the final timing analysis.
Được đề xuất
TTL Bus Expansion
The SN75114N can expand a TTL interface because its output stages provide TTL-compatible levels and up to 40 mA of source current. The Texas Instruments SN75114 datasheet, Rev. C, specifically identifies TTL-expander operation in addition to balanced-line driving. This makes the device useful when additional logic drive is needed without moving to a higher-voltage ECL interface. Each output must remain within its current limit, and the total fan-out, load capacitance, and propagation delay of the expanded bus require verification.
Được đề xuất
Phase-Splitting Circuits
The SN75114N's dual output arrangement supports phase splitting, allowing a signal to be converted into complementary outputs for balanced downstream circuitry. The manufacturer identifies phase splitting as a supported use for the SN75114 family, whose output stages combine TTL-compatible levels with separate sink and active pull-up access. A phase-sensitive design should examine propagation-delay skew between the complementary outputs and the receiving circuit. The 40 mA output limit and TTL loading rules must also remain within the device limits.
Được đề xuất
Industrial Control Signal Interfaces
The SN75114N can drive balanced control or data lines between circuit cards in a 5 V industrial control system when the equipment's environmental grade permits. Its dual-channel organization reduces the number of line-driver packages needed, while the 40 mA output capability provides stronger drive than conventional logic gates. For reliable operation, route each differential pair over a common ground reference, protect exposed cables against surge and ESD, and confirm that the selected SN75114 suffix supports the enclosure's temperature range.
Được đề xuất
Legacy Computer Peripherals
The SN75114N fits legacy TTL systems that need differential drive for twisted-pair cables or point-to-point interconnections. Its 5 V supply, TTL-compatible output levels, and dual channels suit equipment built around conventional bipolar TTL logic. Through-hole PDIP construction also simplifies repair and prototype work in older control systems. Integration still requires checking the original bus topology, cable length, termination, grounding arrangement, and whether a modern RS-422 or RS-485 transceiver is required for regulatory or cable-length reasons.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho SN75114N — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | SN55114N | SN75114P | SN75114D |
|---|---|---|---|---|
| Package | PDIP-16 | PDIP-16 | PDIP-16 | PDIP-16 |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Product Type | Dual differential line driver | Dual differential line driver | Dual differential line driver | Dual differential line driver |
| Supply Voltage | 5 V | 5 V | 5 V | 5 V |
| Maximum Output Current | 40 mA | 40 mA | 40 mA | 40 mA |
| Number of Driver Channels | 2 channels | 2 channels | 2 channels | 2 channels |
| Logic Compatibility | TTL-compatible outputs | TTL-compatible outputs | TTL-compatible outputs | TTL-compatible outputs |
| Specialized Functions | TTL expander and phase splitter | TTL expander and phase splitter | TTL expander and phase splitter | TTL expander and phase splitter |
Bảo phân biệt quan trọng
- Retains the original dual-channel interface while changing temperature grade (vsSN75114P)
- Provides a same-family military-temperature option (vsSN55114N)
- Maintains pin-compatible family sourcing across three temperature designations (vsSN75114D)
Ghi chú thiết kế
Route each differential signal as a pair over a continuous ground plane or ground reference. Keep the driver close to the cable or board-to-board interface, minimize stub branches, and avoid introducing unmatched impedance between the complementary outputs. The separate YS and ZS sink terminals and adjacent YP and ZP pull-up terminals should be connected according to the manufacturer's output-configuration diagram rather than treated as interchangeable pins.
Treat the SN75114N as a 5 V TTL interface rather than as a general-purpose RS-422 or RS-485 transceiver. Verify output levels against the receiver thresholds, check the 40 mA current limit under worst-case loading, and confirm propagation-delay and transition-time requirements for the intended bit rate. Cable length and termination should be calculated from the actual line impedance rather than copied from an unrelated communications standard.
Place the device's supply decoupling close to the package and use the manufacturer-recommended network when one is specified. Check each output separately for DC and capacitive loading because the 40 mA rating applies to the output stage rather than to an unlimited number of downstream devices. Account for rise and fall times, clock or data frequency, and simultaneous switching of both channels when evaluating supply noise and ground bounce.
Do not substitute a generic differential transceiver solely because it has a similar pin count. RS-422 and RS-485 devices may use different supply voltages, logic thresholds, enable structures, termination methods, and output-current limits. A valid replacement must match the 16-pin PDIP footprint, 5 V supply, TTL output levels, channel count, and required timing. Verify the production status and environmental grade of the selected suffix before release.
Thông tin tuân thủ
The manufacturer product page and datasheet identify the SN75114 family, but no explicit environmental or substance-compliance declarations were included in the retrieved records.