STMicroelectronics

STM32F401CCU7 - 84MHz Cortex-M4 MCU, 256KB Flash | STMicroelectronics

N.º de pieza: STM32F401CCU7 ✓ Activo
1.8 V, 2.5 V, or 3.3 V Vdss 48-pin UFQFPN Package 84 MHz Speed 256 KB Memory
MOQ: 1 |

STM32F401CCU7 Descripción general

STMicroelectronics STM32F401CCU7 is a 32-bit Arm Cortex-M4 microcontroller with a floating-point unit, operating up to 84 MHz, and integrating 256 KB of Flash memory and 64 KB of RAM in a 48-pin UFQFPN 7 x 7 mm package. The device belongs to the STM32F4 high-performance access line and combines a 105 DMIPS processing capability with 11 timers, one ADC, and 11 communication interfaces.

A microcontroller is a programmable system-on-chip that executes firmware, reads sensors, controls peripherals, and exchanges data with other systems. STM32F401 devices sit within the STM32 family, use the Arm Cortex-M4 processor core, and belong to the broader embedded MCU and embedded-processing semiconductor categories. Their combination of moderate processing performance, integrated memory, and compact packaging supports cost-sensitive embedded control while retaining useful DSP and floating-point capability.

Key features include a 32-bit Cortex-M4 core, an integrated FPU, 84 MHz maximum operating frequency, and 105 DMIPS performance. The 256 KB Flash provides embedded code and nonvolatile data storage, while 64 KB of RAM supports working memory and stack requirements. Multiple timers, one ADC, and 11 communication interfaces allow the MCU to consolidate sensing, timing, control, and external connectivity functions on a single device.

The architecture supports connected industrial, medical, consumer, and communications equipment where a compact controller must combine real-time control with manageable memory requirements. The single ADC and extensive peripheral set reduce the need for external components in moderate signal-processing designs, while the Cortex-M4 FPU accelerates floating-point calculations used in filtering, control, and sensor-conditioning algorithms. Software compatibility across the STM32 ecosystem can simplify firmware reuse and qualification.

Typical uses include industrial sensor controllers, building automation modules, compact motor-control subsystems, medical monitoring equipment, communications equipment, and consumer accessories. The 48-pin UFQFPN package supports dense PCB layouts, but its exposed thermal pad and fine-pitch leads require careful layout, assembly, and thermal-management practices.

For a new PCB, follow the pin-description table and recommended land pattern in the STMicroelectronics STM32F401 datasheet. Place all decoupling capacitors close to their supply pins, connect the exposed pad to the ground plane according to the datasheet layout, and verify signal-level compatibility before substituting the device in an existing design.

This page organizes the STM32F401CCU7 specifications, sourcing information, pinout resource, same-package alternatives, and practical integration guidance to support faster component selection and hardware planning.

Alternativas directas para STM32F401CCU7 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

STM32F401CCU6TR

✅ Sustitución directa
📦 48-pin UFQFPN
Maximum frequency 84 MHz versus 84 MHz (0% difference) and Flash 256 KB versus 256 KB (0% difference); the U6 temperature-grade code differs from U7

📋 Alternativa de referencia (no en el catálogo)

STM32F401CCU7 Valores máximos y características eléctricas

Product Type 32-bit Arm Cortex-M4 microcontroller with FPU
Processor Core Arm Cortex-M4
Architecture ARM 32-bit
Maximum CPU Frequency 84 MHz
Peak Processing Performance 105 DMIPS
Flash Memory 256 KB
Flash Organization 256K x 8 bits
RAM 64 KB
Timer Count 11 timers
ADC Count 1 ADC
Communication Interface Count 11 communication interfaces
Supply Voltage Options 1.8 V, 2.5 V, or 3.3 V
Encapsulado 48-pin UFQFPN
Package Dimensions 7 x 7 mm
Exposed Pad Yes
Tipo de montaje Surface mount
Delivery Format Tray
Floating-Point Unit Integrated

Guía de configuración de pines de STM32F401CCU7 7 x 7 mm

Configuración de pines para STM32F401CCU7 (encapsulado 7 x 7 mm). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.

Diagrama de patillaje del encapsulado 7 x 7 mm para STM32F401CCU7

No hay datos detallados de patillaje disponibles para STM32F401CCU7.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

STM32F401CCU7 es adecuado para 6 aplicacións: Industrial Sensor Controller, Building Automation Module, Medical Monitoring Device, Compact Communications Controller, Motor and Actuator Control, Portable Consumer Accessory.

🏭

Industrial Sensor Controller

The STM32F401CCU7 fits compact industrial sensor controllers that combine periodic acquisition with local decision-making. Its 84 MHz Cortex-M4 core and integrated FPU can process filtered measurements, while one ADC supports suitable analog-sensing channels and 11 timers provide timing resources for sampling and control tasks. The 256 KB Flash stores application firmware, calibration logic, and protocol handlers, while 64 KB RAM accommodates buffers and control state. Its 48-pin UFQFPN package reduces board area, although the exposed pad and fine-pitch routing require careful PCB layout and thermal control.

🧩

Building Automation Module

The STM32F401CCU7 is appropriate for building automation modules that supervise sensors, coordinate outputs, and maintain communications over a local network. Its 11 timers can organize periodic sensing and actuator timing, and the 11 communication interfaces support multiple serial protocols within the STM32F4 family. The 84 MHz Cortex-M4 performance leaves useful headroom for filtering, state management, and protocol processing, while 256 KB of Flash accommodates a substantial embedded application. A 1.8 V, 2.5 V, or 3.3 V supply configuration allows alignment with the selected communications and sensor ecosystem.

💊

Medical Monitoring Device

The STM32F401CCU7 can serve as the control processor in a compact medical monitoring device that samples limited analog signals and performs local signal processing. The integrated FPU supports efficient floating-point filtering and calculations, while the 84 MHz CPU can manage acquisition timing and user-interface tasks. Its 64 KB RAM and 256 KB Flash provide a balanced embedded footprint for connected monitoring products. Compliance must be evaluated at the finished-product level, including the exact ordering grade, applicable medical standards, electrical safety requirements, and risk-control processes rather than relying only on general MCU specifications.

🌐

Compact Communications Controller

The STM32F401CCU7 suits compact communications controllers that must manage serial links, framing, and application-layer logic in a small embedded enclosure. The 11 communication interfaces provide broad protocol-oriented peripheral support, while the Cortex-M4 FPU at 84 MHz offers sufficient throughput for buffering, filtering, and packet processing. The 48-pin UFQFPN footprint supports dense layouts where board area is constrained, and the 256 KB Flash can hold networking stacks or application firmware. Exact transceiver and protocol compatibility should be established from the manufacturer peripheral matrix and pin table.

⚡

Motor and Actuator Control

The STM32F401CCU7 can support compact motor or actuator-control subsystems that require deterministic periodic timing and embedded control calculations. Eleven timers provide a substantial timing foundation for PWM, input capture, and synchronization functions, while the 84 MHz Cortex-M4 core and FPU can execute filtering and control algorithms. Its 256 KB Flash and 64 KB RAM are suitable for moderate embedded-control workloads without requiring an external microcontroller. Power-stage design, thermal performance, and safety behavior remain system-level responsibilities, particularly where mains-connected or safety-related operation is required.

📱

Portable Consumer Accessory

The STM32F401CCU7 fits portable consumer accessories that combine local control, analog sensing, and compact serial connectivity. Its low-density 48-pin package supports space-constrained assemblies, while the Cortex-M4 FPU provides practical signal-processing performance without a larger processor. The 256 KB Flash is suitable for embedded UI logic, communication handlers, and configuration data, and 64 KB RAM supports working buffers. Designers should use the exposed-pad land pattern and place decoupling capacitors according to the manufacturer guidance to preserve signal and thermal performance in a densely assembled enclosure.

Resumen de productos recomendados

STM32F401CCU7 STMicroelectronics Se usa en: Industrial Sensor Controller, Building Automation Module, Medical Monitoring Device, Compact Communications Controller, Motor and Actuator Control, Portable Consumer Accessory STM32F401CCU6TR Same-family firmware and hardware evaluation alternative Se usa en: Industrial Sensor Controller, Building Automation Module, Medical Monitoring Device, Compact Communications Controller, Motor and Actuator Control, Portable Consumer Accessory
What are the key specifications of STM32F401CCU7?
The STM32F401CCU7 is an 84 MHz, 32-bit Arm Cortex-M4 microcontroller with an integrated FPU, 256 KB of Flash, 64 KB of RAM, 11 timers, one ADC, and 11 communication interfaces. According to the STMicroelectronics STM32F401 product documentation, the device also provides a 105 DMIPS performance figure. It is packaged in a 48-pin UFQFPN measuring 7 x 7 mm. These specifications position it for compact embedded systems that require more arithmetic capability than a basic Cortex-M0 or Cortex-M3 design without moving to a larger, high-end Cortex-M7 platform.
What is the operating voltage of STM32F401CCU7?
The STM32F401CCU7 supports 1.8 V, 2.5 V, and 3.3 V supply configurations. The STM32F401 product listing identifies those three operating-voltage options, while the manufacturer datasheet provides the detailed limits for each power domain and I/O structure. When designing the board, select the regulator output to match the logic levels of connected sensors, transceivers, and displays. Do not assume every I/O pin can tolerate the highest supply when a lower domain voltage is selected; check the pin-type definitions and absolute-maximum ratings in the datasheet.
Where can I find the STM32F401CCU7 pinout?
The STM32F401CCU7 pinout is documented in the STMicroelectronics STM32F401 datasheet and the associated pin-definition documentation available from the STM32F401 documentation page. The device uses a 48-pin UFQFPN package with an exposed pad. Use the datasheet pin-description table to assign every ball, including power, ground, reset, clock, debug, and communication functions. The 48-pin package also requires attention to the thermal and electrical land pattern rather than treating the exposed pad as an optional connection.
Where to download the STM32F401CCU7 datasheet PDF?
Download the STM32F401CCU7 documentation from the STMicroelectronics STM32F401 documentation page or from the official STM32F401 product page linked on this page. The manufacturer datasheet is the authoritative source for electrical characteristics, pin definitions, package dimensions, memory mapping, and recommended PCB layouts. The STM32F401CCU7 ordering information identifies 256 KB of Flash, 64 KB of RAM, an 84 MHz Cortex-M4 core, and the 48-pin UFQFPN package. Use the complete family documentation when a feature or pin is not obvious from a short distributor summary.
Is STM32F401CCU7 suitable for industrial control applications?
The STM32F401CCU7 is suitable for many industrial control tasks that fit its 84 MHz processing rate, 256 KB Flash, 64 KB RAM, 11 timers, one ADC, and 11 communication interfaces. Its timer resources support periodic control and input-capture functions, while the ADC and Cortex-M4 FPU can handle basic sensing and filtering. The exact industrial temperature range and product qualification status should be checked in the ordering information before deployment in a high-temperature or safety-regulated environment.
What can replace the STM32F401CCU7?
The STM32F401CCU6TR is the closest documented same-package replacement candidate, using the same 48-pin UFQFPN format and retaining the 84 MHz Cortex-M4, 256 KB Flash, and 64 KB RAM ratings. Its temperature-grade suffix differs, so the operating-temperature limits must be checked before accepting it for every design. The cross-brand replacement search did not identify a candidate that could be verified as a complete drop-in replacement. Firmware, clock, peripheral, bootloader, and qualification differences make an unqualified second-source substitution inappropriate.
What is the best STMicroelectronics equivalent for STM32F401CCU7?
The STM32F401CCU6TR is the best documented STMicroelectronics candidate because it retains the 48-pin UFQFPN package, 84 MHz Cortex-M4 processor, 256 KB Flash, and 64 KB RAM. It differs in its ordering temperature-grade code, while the TR suffix identifies the tape-and-reel delivery format. Before replacing the STM32F401CCU7, compare the complete ordering table, operating-temperature limits, pin definitions, and peripheral configuration. A shared package and matching headline memory specifications do not by themselves prove identical behavior in every application.
STM32F401CCU7 vs STM32F401CCU6TR - which is better?
The STM32F401CCU7 is the better choice when the design requires the temperature grade associated with the U7 ordering code; the STM32F401CCU6TR is a same-family candidate when its grade and delivery format meet the application requirements. Both use a 48-pin UFQFPN package and are associated with an 84 MHz Cortex-M4 core, 256 KB Flash, and 64 KB of RAM. The decisive selection criteria are the manufacturer ordering table, required ambient-temperature range, and production packaging format rather than basic processing performance.
When should I choose STM32F401CCU7 over STM32F401CCU6TR?
Choose the STM32F401CCU7 when the product specification calls for the U7 temperature-grade option or when a standard production allocation makes it the preferred ordered device. Both candidate parts provide the same headline 84 MHz processing rate, 256 KB Flash, 64 KB RAM, and 48-pin UFQFPN footprint. The STM32F401CCU6TR becomes attractive when its U6 temperature grade is sufficient and tape-and-reel packaging is required for automated assembly. Confirm the exact ordering limits in the STMicroelectronics documentation before making a design change.
Can STM32F401CCU7 replace STM32F411CCY6TR?
The STM32F401CCU7 cannot be assumed to be a direct drop-in replacement for the STM32F411CCY6TR because their package drawings and ordering variants differ. The target uses a 48-pin UFQFPN package, while the CY6TR identifier denotes a different package and tape-and-reel ordering combination. The families also represent different STM32F4 performance and feature positions. A board change, footprint review, firmware port, and peripheral validation would therefore be required; use the manufacturer pin tables rather than treating the shared STM32 family name as proof of compatibility.
How do I design the power and decoupling for STM32F401CCU7?
Design the STM32F401CCU7 power tree around its supported 1.8 V, 2.5 V, and 3.3 V supply configurations and place the required bypass capacitors close to the associated supply and ground balls. The exposed pad must follow the manufacturer’s thermal and electrical land-pattern guidance. Keep high-current return paths compact and separate sensitive analog routing from switching nodes where practical. Before layout release, compare every capacitor value, voltage rating, and operating-temperature requirement against the STM32F401 datasheet because the device does not use one universal supply arrangement.
Does STM32F401CCU7 have an FPU and DSP capability?
The STM32F401CCU7 includes an Arm Cortex-M4 core with an integrated floating-point unit and is listed for 105 DMIPS performance. The FPU supports efficient single-precision floating-point operations used in control loops, sensor conversion, filtering, and general signal processing. It does not turn the device into a dedicated digital signal processor, so designers should still evaluate interrupt latency, memory bandwidth, converter performance, and algorithm-specific requirements. The 256 KB Flash and 64 KB RAM must also be adequate for the compiled firmware and working data.
How many peripherals does STM32F401CCU7 include?
The STM32F401CCU7 includes 11 timers, one ADC, and 11 communication interfaces according to the STM32F401CCU7 datasheet summary. This peripheral mix supports applications combining periodic control, analog measurement, serial data exchange, and external communication. The exact functions assigned to each peripheral depend on package pin availability, clock configuration, alternate-function mapping, and device variant. Use the manufacturer pin table and reference manual when allocating interfaces so that conflicts between timers, debug functions, and communication peripherals are resolved before schematic capture.
Where can I buy STM32F401CCU7 and what is its price?
Use the Request a Quote form on this page to ask for STM32F401CCU7 availability, current unit pricing, and lead time. The Request a Quote workflow allows the exact MPN, quantity, and delivery requirements to be reviewed without relying on a static price or assumed stock position. For production planning, also state whether the parts are required in tray or tape-and-reel format. The product is an active catalog device within the STM32F401 family, but current operational details should be confirmed through the quotation process.
What is the lead time and stock status of STM32F401CCU7?
The current lead time and stock status for STM32F401CCU7 should be requested through the Request a Quote form on this page. Include the required quantity, target delivery date, and preferred delivery format so the procurement request can be evaluated accurately. The STM32F401 family is active, but family status alone does not guarantee an immediate allocation for every order quantity. Engineers should also use the manufacturer ordering information to determine whether the proposed part code and packaging configuration match the intended production build.

Datos de referencia de ingeniería para STM32F401CCU7 — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose the STM32F401CCU7 when a new design requires an 84 MHz Cortex-M4 with FPU, 256 KB Flash, 64 KB RAM, and a compact 48-pin UFQFPN footprint. It is well suited to embedded sensing, timing, communications, and moderate control workloads without the memory and package burden of a higher-end STM32F4 device. The STM32F401CCU6TR is the relevant same-family candidate when its U6 temperature grade is acceptable and its tape-and-reel format matches the assembly plan; both preserve the headline processor, memory, and package configuration. Do not select a different STM32F4 MPN solely because its pin count matches. Verify the package drawing, exposed-pad land pattern, supply arrangement, peripheral matrix, bootloader behavior, temperature grade, and qualification requirements. For an existing production PCB, use the manufacturer comparison and pin tables to establish that every connected signal remains electrically and functionally valid before approving a substitution.

Comparación con alternativas

Parámetro Este producto STM32F401CCU6TR
Brand STMicroelectronics STMicroelectronics
Package 48-pin UFQFPN (7 x 7 mm) 48-pin UFQFPN (7 x 7 mm)
Processor Core Arm Cortex-M4 Arm Cortex-M4
Maximum CPU Frequency 84 MHz 84 MHz
Flash Memory 256 KB 256 KB
RAM 64 KB 64 KB
Floating-Point Unit Integrated Integrated
Ordering Grade U7 U6

Diferenciadores clave

  • Compact 48-pin implementation with substantial embedded memory (frente a STM32F401CCU6TR)
  • Floating-point processing in a compact MCU package (frente a STM32F401CCU6TR)
  • Integration for embedded sensing and timing (frente a STM32F401CCU6TR)

Notas de diseño

Use the STM32F401 datasheet land pattern and pin-description table as the authority for the 48-pin UFQFPN footprint. Place required decoupling capacitors directly beside their associated supply and ground balls, keep the exposed-pad connection and thermal-via arrangement consistent with the reference layout, and verify courtyard clearance against the selected assembler. A fine-pitch QFN can appear electrically correct in schematic review yet become difficult to assemble if pads, vias, or solder mask openings are modified without manufacturer guidance.

Design separate, low-impedance paths for the MCU supply domains and connect each decoupling point close to the relevant package ball. Confirm regulator ripple, startup sequencing, voltage tolerances, and I/O limits against the selected 1.8 V, 2.5 V, or 3.3 V configuration. Do not route high-current return paths through the exposed pad area in a way that adds voltage noise to sensitive ground references. The manufacturer power-supply and decoupling recommendations should be copied exactly into the schematic and layout.

The exposed pad is a central thermal and electrical feature, not an unused lead. Provide the recommended ground-plane connection and vias so heat can spread away from the device under sustained 84 MHz operation. Estimate junction temperature from actual regulator dissipation, ambient temperature, board construction, and the package thermal data before defining the maximum operating duty cycle. Copper area on a small board can be limited, so enclosure airflow and load profile may require validation in the final mechanical assembly.

Do not treat another STM32F4 member as a drop-in part merely because it uses 48 pins. Verify the exact package drawing, exposed-pad requirements, power pins, oscillator connections, debug pins, alternate functions, and peripheral availability. When evaluating the STM32F401CCU6TR, confirm the operating-temperature grade and delivery format. Also check whether existing firmware relies on a peripheral or pin position not present in the selected variant, and run peripheral, clock, brownout, and full production-board validation before releasing an alternate MPN.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The manufacturer ordering information must be consulted for the exact package, temperature grade, and compliance declarations. No specific compliance claim is made for this exact ordering code.

Datos verificados el: 2026-11-15 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

stm32f401ccu pinout STM32F401CCU7 datasheet STM32F401CCU7 datasheet pdf STM32F401CCU7 specifications STM32F401CCU7 pin configuration STM32F401CCU7 48 pin UFQFPN STM32F401CCU7 equivalent STM32F401CCU7 replacement STM32F401CCU7 vs STM32F401CCU6TR STM32F401CCU7 application circuit STM32F401CCU7 price STM32F401CCU7 stock STMicroelectronics STM32F401CCU7 STM32F401CCU7 84MHz Cortex-M4

Componentes & términos relacionados

STMicroelectronics STM32F401CCU7 STM32F401CCU6TR STM32F401 Arm Cortex-M4 Arm Cortex-M4F microcontroller MCU embedded microcontroller embedded processing semiconductor STM32F4 STM32 Dynamic Efficiency floating-point unit FPU DSP 256 KB Flash memory 64 KB RAM 84 MHz 105 DMIPS UFQFPN-48 QFN family surface-mount package ADC timer
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ