STM32F469IIH6 - 180MHz Cortex-M4 MCU | STMicroelectronics
N.º de pieza: STM32F469IIH6 ✓ ActivoSTM32F469IIH6 Descripción general
A microcontroller is a programmable semiconductor device that integrates a processor core, memory, and peripherals into one compact component. The STM32F4 family belongs to the Arm Cortex-M microcontroller hierarchy, combining real-time control capability with extensive digital interfaces. The STM32F469IIH6 is positioned as a high-performance part with substantial Flash storage and a large ball-grid array footprint for designs requiring extensive external connectivity.
Key features include an Arm Cortex-M4 processor with DSP and floating-point support, operation up to 180 MHz, and 2 MB of Flash memory organized as 2 M by 8 bits. The device also includes Chrom-ART Accelerator and ART Accelerator technologies, external SDRAM interface capability through the FMC, dual QSPI support, TFT controller resources, and MIPI-DSI support. These functions target high-bandwidth displays and graphics-intensive embedded systems.
The STM32F469xx architecture integrates a high-performance 32-bit RISC core with extensive connectivity and graphics peripherals. The reference manual identifies the STM32F469xx and STM32F479xx families as Arm Cortex-M4 devices with different memory sizes, packages, and peripherals. Developers can use the RM0386 reference manual for register definitions, interrupt behavior, peripheral operation, and board-level implementation guidance.
Typical applications include industrial human-machine interfaces, TFT display controllers, camera and imaging modules, networked embedded equipment, audio-processing systems, and high-performance connected products. The large UFBGA package makes the device especially appropriate for multilayer printed circuit boards where fine-pitch routing and many external connections are required.
A critical design consideration is that the 176-ball UFBGA footprint requires careful ball assignment, escape routing, and assembly-process control. Follow the manufacturer pin definitions and reference-manual peripheral requirements rather than inferring connections from a generic BGA layout. Firmware validation should also cover power sequencing, clock configuration, memory initialization, and display or camera timing.
This page consolidates the key device characteristics, qualified same-footprint alternatives, application guidance, design considerations, and structured comparisons. It is intended to help engineers evaluate the STM32F469IIH6 against relevant STM32 family alternatives before committing a complex high-pin-count layout to production.
Alternativas directas para STM32F469IIH6 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con STM32F469IIH6 (mismo factor de forma y huella) — difiere en Package, Core Architecture, DMIPS, Display Controller, Flash Memory.
STM32F469NIH6
✅ Sustitución directaConsulte el precio
Ver hoja de datos →STM32F429NIH6
✅ Sustitución directa✓ En stock
$8.63 / unidad
Ver hoja de datos →STM32F469IIH6 Valores máximos y características eléctricas
| Product Type | 32-bit microcontroller |
| Processor Core | Arm Cortex-M4 |
| Architecture | 32-bit RISC |
| Maximum CPU Frequency | 180 MHz |
| Flash Memory | 2 MB (2 M x 8 bits) |
| DSP Support | Yes |
| Floating-Point Unit | Yes |
| Encapsulado | 176-ball UFBGA, 10 mm x 10 mm |
| ART Accelerator | Yes |
| Chrom-ART Accelerator | Yes |
| External SDRAM Interface | FMC SDRAM interface |
| QSPI Interface | Dual QSPI |
| Display Support | TFT and MIPI-DSI |
Guía de configuración de pines de STM32F469IIH6 176-ball ufbga, 10 mm x 10 mm
Configuración de pines para STM32F469IIH6 (encapsulado 176-ball ufbga, 10 mm x 10 mm). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para STM32F469IIH6.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
STM32F469IIH6 es adecuado para 6 aplicacións: Industrial Human-Machine Interface, TFT Display Controller, MIPI-DSI Embedded Display System, Industrial Camera and Imaging Module, High-Performance Audio Controller, Connected Industrial Controller.
Industrial Human-Machine Interface
The STM32F469IIH6 fits an industrial human-machine interface because its 180 MHz Arm Cortex-M4 core can manage display updates and local control logic while the integrated Chrom-ART Accelerator supports graphics-oriented workloads. The 2 MB of Flash provides room for firmware, fonts, images, and configuration data, while the FMC SDRAM interface permits an external framebuffer when a display design requires more memory. A dual-QSPI interface can connect serial storage or additional serial peripherals. The principal engineering constraint is that the 176-ball UFBGA footprint demands fine-pitch escape routing and careful multilayer-board layout.
Recomendado
TFT Display Controller
The STM32F469IIH6 is suited to TFT display control because the device combines a 180 MHz Cortex-M4 processor with the Chrom-ART Accelerator and dedicated TFT support. Its 2 MB of embedded Flash can store interface firmware, fonts, and compact graphical resources, while FMC SDRAM can back larger framebuffers. The controller can also use dual QSPI for serial memory or additional display resources. Deployment should validate panel timing, bus width, synchronization, and DMA behavior in hardware because LCD performance depends on the complete panel and memory interface configuration.
Recomendado
MIPI-DSI Embedded Display System
For an MIPI-DSI system, the STM32F469IIH6 provides a 180 MHz Cortex-M4 core, dedicated MIPI-DSI support, and 2 MB of Flash within a compact 176-ball UFBGA package. These resources allow a board to combine display control, touch or sensor management, communications, and application processing without requiring a separate display controller in every design. Designers should budget PCB area for high-speed MIPI routing, maintain continuous reference planes, and confirm connector, panel, and lane requirements. External SDRAM through FMC can be added when graphics buffering exceeds internal memory.
Recomendado
Industrial Camera and Imaging Module
The STM32F469IIH6 can serve in an embedded camera or imaging module where the 180 MHz Cortex-M4 core handles image acquisition control and the floating-point unit accelerates digital signal-processing workloads. Its 2 MB of Flash stores control firmware and configuration tables, while dual QSPI can connect serial memory or camera-related resources. The Chrom-ART Accelerator can also assist graphics and display-side processing. A production design must verify the available camera interface, DMA pathways, memory bandwidth, and external-memory timing rather than assuming every imaging peripheral is present.
Recomendado
High-Performance Audio Controller
The STM32F469IIH6 is appropriate for audio control and processing because its 180 MHz Cortex-M4 core includes DSP instructions and a floating-point unit, while 2 MB of Flash accommodates firmware, effects tables, and interface configuration. Dual QSPI offers a path to external serial memory, and FMC SDRAM support can provide larger working storage for demanding buffers. In implementation, engineers should separate sensitive analog and clock routing from high-speed digital signals, control impedance continuously, and test real-time audio timing under the intended peripheral load and operating conditions.
Recomendado
Connected Industrial Controller
The STM32F469IIH6 fits a connected industrial controller that combines real-time control with a graphical interface and substantial embedded firmware. The 180 MHz Cortex-M4 core has ample headroom for protocol handling and control tasks, while 2 MB of Flash supports application firmware and local assets. FMC SDRAM and dual QSPI expand storage options, and the Chrom-ART Accelerator supports display-oriented functions. Design reviews should partition network traffic, control interrupts, and display updates to avoid latency variation, then verify thermal behavior inside the final enclosure.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para STM32F469IIH6 — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | STM32F469NIH6 | STM32F429NIH6 |
|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 176-ball UFBGA, 10 mm x 10 mm | 176-ball UFBGA, 10 mm x 10 mm | 176-ball UFBGA, 10 mm x 10 mm |
| Processor Core | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 |
| Maximum CPU Frequency | 180 MHz | 180 MHz | 180 MHz |
| Flash Memory | 2 MB | 2 MB | 2 MB |
| DSP and Floating-Point Support | DSP and FPU supported | DSP and FPU supported | DSP and FPU supported |
| FMC SDRAM Interface | Yes | Yes | Yes |
Diferenciadores clave
- Dedicated graphics and display integration (frente a STM32F429NIH6)
- Higher-performance Arm Cortex-M4 platform (frente a STM32F429NIH6)
- Substantial embedded storage (frente a STM32F469NIH6)
Notas de diseño
Treat the 176-ball UFBGA as a high-density routing problem. Assign every ball from the manufacturer pin-description table, preserve the recommended pad geometry and solder-mask pattern, and route escape traces using a multilayer stack-up with uninterrupted reference planes. Do not reuse a generic BGA land pattern because signal assignments and exposed-ball functions are specific to this device family.
Place decoupling and bulk-supply connections close to their associated power balls, using a low-impedance distribution network for every supply domain. Keep high-speed display and QSPI routes short and continuous, avoid routing them across split planes, and observe length matching specified by the attached memory or display device. Validate signal integrity with the final stack-up rather than a nominal board model.
Do not treat the same BGA family as proof of complete electrical equivalence. Before substituting STM32F469NIH6 or STM32F429NIH6, verify ordering-code meaning, temperature range, exposed-ball connections, power pins, pin multiplexing, peripheral availability, clock-tree requirements, and boot behavior. F469-specific TFT, MIPI-DSI, Chrom-ART, SDRAM, and dual-QSPI functions require explicit confirmation on the replacement.
Sequence power rails in accordance with the manufacturer requirements for the selected board configuration, and verify reset and clock startup after every rail transition. The 180 MHz operating rate can increase dynamic power consumption, so estimate worst-case activity and thermal conditions with the complete peripheral mix. Measured board-level supply integrity and temperature testing are especially important for a fine-pitch, high-performance design.
Información de cumplimiento
No definitive RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified for this exact ordering code.