STM32G473VBH3 - 170MHz Cortex-M4 MCU | STMicroelectronics
N.º de pieza: STM32G473VBH3 ✓ Activo| Cant. | Precio unitario | Total |
|---|---|---|
| 1 | $2.9795 | $2,98 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1.000 | $0 | $0,00 |
STM32G473VBH3 Descripción general
A microcontroller is a programmable semiconductor system that combines a processor core, memory, peripherals, and interfaces on one integrated circuit. In the product hierarchy, the STM32G473VBH3 is a microcontroller based on the Arm Cortex-M4 32-bit RISC core. Its flash memory stores firmware, while integrated peripherals support communication, timing, analog measurement, control, and debug functions.
The verified product information identifies a 170 MHz operating frequency, 128 KB Flash memory, and a 100-TFBGA package. The STM32G473 device family is also identified by STMicroelectronics as using the high-performance Arm Cortex-M4 core. Mouser describes the part as an Arm Cortex-M4 MCU with math acceleration and high analog capability, while DigiKey identifies the same 170 MHz frequency and 128 KB Flash configuration.
The STM32G473VBH3 is positioned for compact embedded control systems where processing performance, analog functions, and a high pin-count fine-pitch package are important. Its 8 mm by 8 mm TFBGA package can support dense PCB layouts, although ball pitch, escape routing, assembly capability, and thermal performance must be checked during hardware design. Exact peripheral availability, pin functions, electrical limits, and operating-temperature details require confirmation from the official STM32G473VB documentation.
Typical application areas include industrial automation, motor and motion control, power conversion, digital power management, instrumentation, communications equipment, and embedded measurement systems. The math accelerator can assist control-oriented software that benefits from efficient mathematical operations, while the analog feature set is relevant to systems that combine digital computation with signal conditioning or measurement.
The principal design consideration is package integration. A 100-TFBGA is not a through-hole package and requires a compatible PCB footprint, assembly process, inspection strategy, and adequate thermal design. Before release, engineers should verify every ball assignment, power rail, decoupling requirement, clock configuration, peripheral pin mux, and programming interface against the official STMicroelectronics documentation.
This product data consolidates verified distributor and manufacturer information for STM32G473VBH3, including core architecture, frequency, memory, package, sourcing references, and engineering application guidance. It is intended to support initial component selection while leaving detailed engineering decisions anchored to the manufacturer datasheet and reference manual.
Alternativas directas para STM32G473VBH3 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Herramienta de comparación rápida — seleccione piezas alternativas para compararlas lado a lado:
No hay alternativas directas disponibles para este producto.
Solicitar alternativasSTM32G473VBH3 Valores máximos y características eléctricas
| Microcontroller Type | 32-bit single-core microcontroller |
| Processor Core | Arm Cortex-M4 |
| Maximum Operating Frequency | 170 MHz |
| Flash Memory | 128 KB |
| Flash Organization | 128K x 8 bits |
| Math Accelerator | Integrated math accelerator |
| Supply Voltage Minimum | 1.71 V |
| Supply Voltage Maximum | 3.6 V |
| Encapsulado | 100-TFBGA, 8 mm x 8 mm |
| Tipo de montaje | Surface mount |
| Core Architecture | 32-bit RISC |
| Product Series | STM32G4 |
| Manufacturer | STMicroelectronics |
| Operating Temperature Minimum | -40 °C |
| Operating Temperature Maximum | 125 °C |
| High Analog Capability | Yes |
Guía de configuración de pines de STM32G473VBH3 100-tfbga, 8 mm x 8 mm
Configuración de pines para STM32G473VBH3 (encapsulado 100-tfbga, 8 mm x 8 mm). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para STM32G473VBH3.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
STM32G473VBH3 es adecuado para 6 aplicacións: Industrial Automation Controller, Motor and Motion Control, Digital Power Conversion, Industrial Instrumentation, Communications Equipment, Embedded Measurement and Control.
Industrial Automation Controller
The STM32G473VBH3 fits compact industrial automation controllers that need a 170 MHz Arm Cortex-M4 core while combining digital control with high analog capability. Its 128 KB Flash provides a defined firmware-storage budget for control logic, state machines, communications, and diagnostics. The 100-TFBGA package can reduce board area in space-constrained equipment, but it requires careful escape routing and a manufacturing process that supports the 8 mm by 8 mm package. Before schematic release, verify the exact ADC, timer, communication, debug, and supply-ball assignments in the official documentation.
Recomendado
Motor and Motion Control
The STM32G473VBH3 is a candidate for compact motion and motor-control systems because its verified 170 MHz Cortex-M4 core and integrated math accelerator support efficient real-time control calculations. The high analog capability called out by Mouser may assist systems that combine digital computation with sensor and feedback signals. The supplied data does not enumerate the complete PWM, ADC, timer, and control-loop peripheral configuration, so engineers must confirm those functions in the STM32G473VB documentation and map them against the 100-TFBGA footprint before committing to a motor-drive design.
Recomendado
Digital Power Conversion
The STM32G473VBH3 can support digital power-conversion control where a 170 MHz microcontroller core and math acceleration are useful for sampling, control calculations, and supervisory logic. Its 128 KB Flash is suitable for a controlled firmware image, while the high analog feature set is relevant to systems that need measurement and feedback functions. The 100-TFBGA package helps reduce board footprint in compact power modules, but power-stage layout, thermal paths, analog grounding, and exposed-ball requirements must be designed together. Confirm converter-specific peripherals and electrical ratings in the official datasheet.
Recomendado
Industrial Instrumentation
The STM32G473VBH3 is suitable for compact instrumentation platforms that combine signal acquisition, control processing, and communications in one package. Its verified 170 MHz Arm Cortex-M4 core provides computational headroom, while the high analog capability noted by Mouser makes the family relevant to measurement-oriented designs. The 128 KB Flash stores application firmware and calibration logic, leaving the final usable space dependent on the STM32G4 memory map and configuration. The 100-TFBGA footprint should be paired with careful analog partitioning, ground-plane planning, and verified ball assignments.
Recomendado
Communications Equipment
The STM32G473VBH3 can serve as the control processor in communications equipment that requires deterministic embedded performance and a compact high-density package. Its 170 MHz Cortex-M4 core is appropriate for protocol handling, supervisory logic, and data-path control, while the 128 KB Flash provides a defined firmware region. The supplied evidence does not identify the complete set of Ethernet, USB, serial, or other communication peripherals for this exact orderable variant, so interface availability and pin multiplexing must be confirmed from the official STM32G473VB documentation before selecting it for a specific communications standard.
Recomendado
Embedded Measurement and Control
The STM32G473VBH3 is a reasonable candidate for embedded measurement-and-control products where digital computation must coexist with analog signal handling. The verified 170 MHz Cortex-M4 core supports responsive control and filtering software, the math accelerator can improve arithmetic-heavy routines, and the high analog capability provides a relevant starting point for sensor and signal-conditioning integration. The 100-TFBGA package supports dense layouts but increases PCB and assembly complexity. Validate channel counts, sampling characteristics, calibration paths, and package thermal performance using the official manufacturer data before production release.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para STM32G473VBH3 — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto |
|---|---|
| Brand | STMicroelectronics |
| Package | 100-TFBGA, 8 mm x 8 mm |
| Core | Arm Cortex-M4 |
| Architecture | 32-bit RISC |
| Maximum Frequency | 170 MHz |
| Flash Memory | 128 KB |
| Math Accelerator | Integrated |
| Supply Voltage Range | 1.71 V to 3.6 V |
| Operating Temperature | -40 °C to 125 °C |
| High Analog Capability | Yes |
| Surface Mount | Yes |
| Verified Starting Price | $2.9795 as of 2026-10-22 |
Diferenciadores clave
- Dedicated 100-TFBGA integration (frente a STM32G473RCT6)
- 170 MHz Cortex-M4 performance class (frente a STM32G473CCU6)
- Analog-oriented family positioning (frente a STM32G473RCT6)
Notas de diseño
Use the official STM32G473VB package drawing as the PCB footprint authority. The verified device is a 100-TFBGA measuring 8 mm by 8 mm, so escape routing, ball-pitch assumptions, pad geometry, and assembly tolerances must not be inferred from a generic BGA footprint. Check every power, ground, decoupling, debug, and signal ball against the official pin table before releasing the PCB. Confirm that the selected board house supports the required fine-pitch assembly and inspection process.
The verified comparison data identifies a 1.71 V to 3.6 V supply range. Build the power tree around the exact supply requirements in the manufacturer datasheet, including allowable sequencing, current limits, and decoupling values. Place required bulk and local capacitors close to their associated supply balls, maintain a low-impedance return path, and keep sensitive analog and communication routes away from noisy switching nodes. Do not treat the family-level voltage range as a substitute for the electrical limits of every supply and peripheral.
Thermal design must be evaluated at the actual control-loop, I/O, and package-loading conditions. The supplied data confirms the 100-TFBGA package but does not provide verified thermal resistance, maximum power dissipation, or exposed-pad details. Those values must be obtained from the official package and electrical documentation. Use the resulting limits to size copper, thermal vias, enclosure heat paths, and ambient-temperature derating; avoid estimating safe junction temperature without the manufacturer data.
For high-speed communication or control signals, route with short return paths and continuous reference planes where the architecture permits. Separate sensitive analog inputs from switching-power and digital-clock regions, use appropriate series terminations only when supported by the interface specification, and validate signal integrity with the actual baud rate, edge rates, load, and board stack-up. The verified data does not enumerate all communication peripherals for this exact part, so confirm the active pins and timing characteristics before releasing high-speed routes.
The main substitution and layout risk is assuming that all STM32G473 variants are interchangeable. STM32G473RCT6 and STM32G473CCU6 are listed as different-package comparison parts, while STM32G473VBH3 uses 100-TFBGA. A different package requires a new footprint, pin-routing review, mechanical update, and likely firmware pin-mux validation. Treat the family name as a starting point, not proof of drop-in compatibility, and obtain a manufacturer or authorized distributor cross-reference before replacing this MCU.
Información de cumplimiento
The supplied verified product results identify the manufacturer, core, frequency, memory, package, and sourcing information, but do not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. These fields remain unknown rather than inferred.
