STMicroelectronics

STM32L152CCT6 - 32MHz Cortex-M3 256KB MCU | STMicroelectronics

N.º de pieza: STM32L152CCT6 ✓ Activo
2.5 V to 3.3 V Vdss 48-LQFP, 7 x 7 mm Package 32 MHz Speed 256 Kbytes Memory
MOQ: 1 |

STM32L152CCT6 Descripción general

The STMicroelectronics STM32L152CCT6 is an ultra-low-power 32-bit microcontroller built around an ARM Cortex-M3 core operating up to 32 MHz. It provides 256 Kbytes of Flash memory, 32 Kbytes of SRAM, 8 Kbytes of EEPROM, USB connectivity, LCD support, ADC, DAC and two operational amplifiers, and is supplied in a 48-LQFP 7 x 7 mm package.

An ultra-low-power microcontroller is a semiconductor device designed to maintain useful processing performance while minimizing energy consumption during active operation, sleep modes, and standby states. The STM32L1 family combines an Arm Cortex-M3 processor with power-management features intended for battery-operated, portable, industrial, medical, and sensor-based products. STM32L152CCT6 is positioned for designs requiring USB connectivity and a relatively large memory configuration without moving to a higher-performance MCU family.

The principal features include 32 MHz maximum CPU frequency, 256 Kbytes of embedded Flash, 32 Kbytes of SRAM, 8 Kbytes of EEPROM, USB, LCD interface capability, 12-bit ADC and DAC resources, and two operational amplifiers. The 48-LQFP package provides a conventional leaded surface-mount format suitable for industrial control boards, instruments, gateways, and compact embedded equipment. Its combination of USB, analog peripherals, and low-power processing makes it useful for portable data-acquisition and connected-control designs.

The STM32L152CCT6 uses the Arm Cortex-M3 architecture and supports a broad peripheral set for embedded control. USB connectivity allows the MCU to act as a USB device, while the LCD interface supports display-oriented products. The ADC and DAC provide analog measurement and output capability, and the integrated operational amplifiers can reduce external analog component count in suitable signal-conditioning circuits. Firmware can be organized around standard embedded-control tasks, USB connectivity, display updates, and sensor acquisition rather than requiring separate peripheral devices.

Typical applications include industrial sensor nodes, USB-to-serial data acquisition modules, compact instrumentation, medical monitoring equipment, battery-powered handheld products, USB-connected control panels, and low-energy embedded gateways. The 32 MHz core and 256 Kbytes of Flash provide useful headroom for protocol stacks and application firmware. The integrated analog resources are especially helpful where board area, standby power, and component count are important design constraints.

When laying out a design, place decoupling capacitors close to each supply pin and route USB differential pairs as a controlled-impedance, tightly coupled pair on a multilayer PCB. Confirm the exact pin assignment and alternate-function requirements in the manufacturer pinout table before assigning LCD, USB, ADC, DAC, or operational-amplifier functions. The MCU also requires the appropriate clock, reset, boot, and programming connections specified by STMicroelectronics.

This product summary combines manufacturer family information, distributor attributes, package details, connectivity features, and application-specific design guidance. It is intended to help engineers evaluate STM32L152CCT6 for USB-enabled, low-power embedded systems while separating confirmed device characteristics from parameters that still require review against the complete manufacturer datasheet.

Alternativas directas para STM32L152CCT6 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con STM32L152CCT6 (mismo factor de forma y huella) — difiere en Operational Amplifiers, Package, EEPROM, Flash Memory, SRAM.

STMicroelectronics
Operational Amplifiers: 2x on-chip
Package: 48-pin LQFP (7x7 mm)
EEPROM: 8 KB
Comparar con STM32L152CCT6 →
STMicroelectronics
Operational Amplifiers: 2 (on-chip rail-to-rail)
Package: LQFP-48 (7x7 mm)
EEPROM: 8 KB
Comparar con STM32L152CCT6 →

STM32L151CCT6

✅ Sustitución directa
STMicroelectronics
📦 48-LQFP (7x7)
ARM Cortex-M3 32-bit · 32 MHz · 256 KB · 32 KB · 8 KB · 1.8 V to 3.6 V · 48-pin LQFP (7x7 mm) · Surface Mount

Consulte el precio

Ver hoja de datos →

STM32L151CCT7TR

✅ Sustitución directa
📦 48-LQFP (7x7)
STM32L151 feature set and different suffix versus STM32L152 USB-equipped target

📋 Alternativa de referencia (no en el catálogo)

STM32L152CCT7

✅ Sustitución directa ⚠️ Especificaciones sin verificar
📦 48-LQFP (7x7)
Same STM32L152 256KB and 32MHz family positioning; suffix-specific temperature and ordering grade must be verified

📋 Alternativa de referencia (no en el catálogo)

STM32L152CCT6A

✅ Sustitución directa ⚠️ Especificaciones sin verificar
📦 48-LQFP (7x7)
Same STM32L152 256KB and 32MHz core family with an A-suffix grade difference that requires qualification review

📋 Alternativa de referencia (no en el catálogo)

STM32L152CCT6 Valores máximos y características eléctricas

Product Type 32-bit ARM Cortex-M3 microcontroller
Core ARM Cortex-M3
Maximum CPU Frequency 32 MHz
Flash Memory 256 Kbytes
SRAM 32 Kbytes
EEPROM 8 Kbytes
Architecture 32-bit RISC
USB USB connectivity
LCD Support LCD interface capability
ADC 12-bit ADC
DAC 12-bit DAC
Operational Amplifiers 2 integrated operational amplifiers
Tensión de alimentación 2.5 V to 3.3 V
Encapsulado 48-LQFP, 7 x 7 mm
Tipo de montaje Surface Mount

Guía de configuración de pines de STM32L152CCT6 48-lqfp, 7 x 7 mm

Configuración de pines para STM32L152CCT6 (encapsulado 48-lqfp, 7 x 7 mm). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.

Diagrama de patillaje del encapsulado 48-lqfp, 7 x 7 mm para STM32L152CCT6

No hay datos detallados de patillaje disponibles para STM32L152CCT6.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

STM32L152CCT6 es adecuado para 6 aplicacións: USB Sensor Node, Industrial Data Acquisition, Medical Monitoring Equipment, Battery-Powered Handheld Device, USB Control Panel, Compact Instrumentation.

🧩

USB Sensor Node

The STM32L152CCT6 fits USB sensor nodes that acquire analog measurements and expose them to a host computer. Its 12-bit ADC, two operational amplifiers, 256 Kbytes of Flash, and 32 Kbytes of SRAM provide room for acquisition logic, calibration, and USB protocol firmware without requiring a separate microcontroller. The device is particularly useful when low-power operation and analog integration matter. Keep the analog inputs short and properly referenced, place decoupling near the supply pins, and route USB D+ and D- as a controlled-impedance differential pair. Validate the complete acquisition chain for noise, settling time, and USB enumeration under the intended operating conditions.

🏭

Industrial Data Acquisition

The STM32L152CCT6 is appropriate for compact industrial data-acquisition equipment that combines sensor conditioning, local control, and USB connectivity. The 32 MHz Arm Cortex-M3 processor can handle sampling control and communication firmware, while the integrated ADC, DAC, and two op amps reduce the number of external analog devices. Its 256 Kbytes of Flash accommodates protocol and application code in a 48-LQFP 7 x 7 mm footprint. Designers should isolate sensitive analog paths from USB and switching circuitry, provide stable references, and verify EMC and surge requirements appropriate to the installation environment before field deployment.

💊

Medical Monitoring Equipment

The STM32L152CCT6 can serve as the control MCU in compact medical monitoring equipment where low-power processing, analog measurement, and a USB interface are required. Its 32-bit Cortex-M3 core supports responsive signal processing, while the 12-bit ADC, DAC, and two integrated operational amplifiers can simplify front-end integration. The 256 Kbytes of Flash and 32 Kbytes of SRAM support protocol handling, data buffering, and application code. Medical designs still require domain-specific risk analysis, verified measurement accuracy, electrical isolation where applicable, and compliance with the intended medical-device standard and regional requirements.

📱

Battery-Powered Handheld Device

The STM32L152CCT6 is well matched to battery-powered handheld instruments because the STM32L1 family is designed around low-power operation and the MCU combines 256 Kbytes of Flash with extensive analog peripherals. The 12-bit ADC, DAC, and two op amps can replace separate conditioning components in suitable designs, while USB provides a convenient configuration and data-transfer path when the device is connected. To maximize battery life, select the appropriate sleep mode, disable unused peripherals, control GPIO states, and account for regulator quiescent current. Do not estimate run time from CPU frequency alone; use the manufacturer operating-current tables and the complete power budget.

📺

USB Control Panel

The STM32L152CCT6 can implement a USB-connected control panel with local status indication, configuration, and diagnostics. Its LCD interface capability is useful for human-readable displays, and the ADC can monitor buttons, dividers, or analog control inputs. A 32 MHz Cortex-M3 core provides sufficient responsiveness for menu handling, state-machine control, and USB communication, while 256 Kbytes of Flash leaves room for protocol and application firmware. Verify the selected LCD interface pins against alternate-function tables, debounce external controls appropriately, and confirm USB suspend behavior so the panel enters the intended low-power state when disconnected.

🔧

Compact Instrumentation

The STM32L152CCT6 is suitable for compact laboratory and field instrumentation that combines a display, analog measurement, data logging, and USB connectivity. The integrated DAC supports stimulus generation or reference output, while the dual op amps can implement buffering, gain, or filtering stages when the signal path permits. At 32 MHz with 256 Kbytes of Flash, the device can handle embedded control, calibration tables, USB communication, and user-interface firmware in one package. Keep high-impedance analog nodes away from USB clocks and digital return currents, use a low-noise reference strategy, and test gain accuracy and noise across the intended measurement bandwidth.

What is STM32L152CCT6?
The STM32L152CCT6 is an ultra-low-power 32-bit STMicroelectronics microcontroller with an Arm Cortex-M3 core, 32 MHz maximum operating frequency, 256 Kbytes of Flash, 32 Kbytes of SRAM, and 8 Kbytes of EEPROM. It also includes USB connectivity, LCD support, 12-bit ADC and DAC resources, and two operational amplifiers in a 48-LQFP 7 x 7 mm package. According to the STMicroelectronics STM32L152CC product page, the device is intended for connected, low-power embedded applications.
What are the key specifications of STM32L152CCT6 that engineers should know?
The key specifications are a 32 MHz Arm Cortex-M3 core, 256 Kbytes of Flash, 32 Kbytes of SRAM, 8 Kbytes of EEPROM, USB connectivity, LCD interface capability, 12-bit ADC and DAC functions, and two integrated operational amplifiers. The device is packaged in a 48-LQFP 7 x 7 mm package and operates from a 2.5 V to 3.3 V supply. These attributes make STM32L152CCT6 suitable for USB-connected sensing, display, data-acquisition, and industrial-control products.
Where can I download the STM32L152CCT6 datasheet?
The official STM32L152CC product page at STMicroelectronics provides the manufacturer datasheet and product documentation for STM32L152CCT6. Use that manufacturer source for the complete pin description, electrical characteristics, memory map, timing diagrams, USB implementation, and package drawings. The product is also described on distributor documentation pages, but the STMicroelectronics product page is the appropriate primary reference for design sign-off and revision-controlled documentation.
Where can I find the STM32L152CCT6 pinout?
The STM32L152CCT6 pinout is documented in the pin-description and package drawings contained in the STMicroelectronics STM32L152CC manufacturer documentation. The device uses a 48-LQFP package, so verify all 48 terminal assignments, power pins, ground pins, and alternate functions against the datasheet before routing the PCB. Use the package drawing and pin table together because several peripheral functions can be mapped to different terminals through alternate-function settings.
Is STM32L152CCT6 suitable for USB-connected sensor devices?
The STM32L152CCT6 is well suited to USB-connected sensor devices because it combines a 32 MHz Cortex-M3 core with USB connectivity, 256 Kbytes of Flash, 32 Kbytes of SRAM, 12-bit ADC capability, and two operational amplifiers. The internal memory is sufficient for typical acquisition, control, and USB protocol firmware, while the analog peripherals can reduce external signal-conditioning requirements. USB bus layout, power, ESD, and firmware compatibility still require normal engineering validation.
Can STM32L151CCT6 replace STM32L152CCT6?
The STM32L151CCT6 is the closest same-brand STM32L1 candidate identified for STM32L152CCT6, but replacement should be conditional rather than assumed. Both belong to the STM32L1 ultra-low-power family and use the 48-LQFP 7 x 7 mm format, while the principal functional distinction is the USB connectivity associated with the STM32L152 family. Confirm the exact peripheral set, pin mapping, clock requirements, firmware support, and USB electrical implementation in the manufacturer documentation before production substitution.
What is the difference between STM32L152CCT6 and STM32L151CCT6?
The STM32L152CCT6 and STM32L151CCT6 are closely related STM32L1 devices, but the STM32L152CCT6 includes USB connectivity that is a defining feature of the STM32L152 family. Both are listed in the 256 Kbytes Flash class and use the same 48-LQFP 7 x 7 mm package format. The STM32L151CCT6 is therefore relevant to non-USB designs, while a direct substitution for a USB product requires validation of the USB pins, clocks, firmware, and peripheral assignments.
When should I choose STM32L152CCT6 instead of STM32L151CCT6?
Choose STM32L152CCT6 when the design requires USB connectivity and the broader STM32L152 feature set; choose STM32L151CCT6 when USB is unnecessary and the application can be implemented with the STM32L151 feature set. Both offer the same principal memory class and 48-LQFP package size, so selection should be driven by required peripherals, application firmware, availability, and qualification rather than footprint alone. Review the exact peripheral differences before committing either part to a new PCB.
What can replace STM32L152CCT6 on the same PCB?
The closest documented same-footprint replacement path is the STM32L151CCT6 family candidate, subject to confirming that USB is not required and that every assigned peripheral remains available. STM32L152CCT7 and STM32L152CCT6A are additional STM32L1 family options that may preserve the LQFP-48 footprint, but temperature grade, suffix, and ordering details must be checked. A true drop-in decision requires pin, electrical, peripheral, firmware, and lifecycle review rather than package matching alone.
Is STM32L152CCT6 the same as STM32L151CCT7TR?
The STM32L152CCT6 and STM32L151CCT7TR are related STM32L1 devices but should not be treated as automatically identical. STM32L152CCT6 is the 256 Kbytes Flash, 32 MHz, USB-enabled member in a 48-LQFP package, while STM32L151CCT7TR belongs to the STM32L151 feature set and includes a different order suffix. Compare the manufacturer pin table and peripheral list, then confirm that removing USB or changing the suffix does not affect the target design.
Where can I buy STM32L152CCT6 and check current lead time?
The STM32L152CCT6 is listed for order through the manufacturer and authorized distribution channels, with live purchasing information shown on the product page. Use the Request a Quote form on this page for current availability, lead time, quantity requirements, and commercial terms. The visible structured pricing fields are updated separately and should not be used as a substitute for a formal quotation for production quantities.
What is the current price of STM32L152CCT6?
The current commercial price for STM32L152CCT6 should be obtained through the Request a Quote form on this page. Pricing depends on order quantity, sourcing channel, delivery location, and the exact suffix and package required. The platform renders structured pricing separately from this technical FAQ, and the form provides the appropriate route for a quantity-specific quotation and current lead-time confirmation.
Is STM32L152CCT6 in stock?
STM32L152CCT6 availability can change by region, quantity, and channel, so use the Request a Quote form on this page for a current stock response. The manufacturer lists the STM32L152CC family as active and offers direct ordering, while distributor inventory changes continuously. For production planning, request confirmation of the exact MPN, package, tray or reel configuration, delivery date, and any permissible alternate sourcing options.
How much power does STM32L152CCT6 consume?
STM32L152CCT6 is designed as an ultra-low-power MCU, but its actual consumption depends on the selected clock, operating mode, active peripherals, GPIO state, supply voltage, and USB state. Consult the manufacturer datasheet for current-versus-mode and frequency tables before completing a battery-life calculation. Estimate the average supply current from the selected duty cycle, then apply the regulator efficiency, quiescent current, and peripheral loading of the complete product rather than using a single generic current value.
How should STM32L152CCT6 USB and decoupling connections be laid out?
Route the USB D+ and D- conductors as a tightly coupled, impedance-controlled differential pair on a continuous reference plane, with minimal stubs and according to the USB layout guidance in the manufacturer documentation. Place the required USB transceiver and support components according to the reference circuit, and keep the MCU supply decoupling capacitors close to their associated power pins. Confirm USB impedance, via geometry, protection components, and grounding against the chosen board stack-up and USB implementation.
What is the best STMicroelectronics equivalent for STM32L152CCT6?
No substitute should be called universally equivalent because firmware, USB behavior, peripheral assignments, and qualification requirements may differ. The closest same-manufacturer candidates are the STM32L151CCT6, STM32L151CCT7TR, STM32L152CCT7, and STM32L152CCT6A identified for comparison, but each requires package, pin, electrical, and feature validation. For a USB-connected product, retain the STM32L152 family unless the manufacturer documentation confirms that the selected alternative provides equivalent USB functionality.

Datos de referencia de ingeniería para STM32L152CCT6 — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose STM32L152CCT6 for compact low-power designs that need USB connectivity together with a 32 MHz Cortex-M3 core, 256 Kbytes of Flash, 32 Kbytes of SRAM, 12-bit conversion resources, LCD support, and two integrated operational amplifiers. It is particularly compelling for USB-connected sensing, data acquisition, control panels, and battery-powered instrumentation. Choose STM32L151CCT6 or STM32L151CCT7TR when USB is not required and the STM32L151 feature set is sufficient. Choose STM32L152CCT7 or STM32L152CCT6A when the STM32L152 feature set remains appropriate but the order suffix, grade, qualification, or lifecycle conditions are preferable. Same-package comparison is not enough for approval: verify the pin table, peripheral availability, clock tree, electrical limits, temperature grade, firmware support, and USB behavior before approving any substitution.

Comparación con alternativas

Parámetro Este producto STM32L151CCT6 STM32L151CCT7TR STM32L152CCT7 STM32L152CCT6A
Package 48-LQFP (7x7) 48-LQFP (7x7) 48-LQFP (7x7) 48-LQFP (7x7) 48-LQFP (7x7)
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
CPU Core ARM Cortex-M3 ARM Cortex-M3 ARM Cortex-M3 ARM Cortex-M3 ARM Cortex-M3
Maximum CPU Frequency 32 MHz 32 MHz 32 MHz 32 MHz 32 MHz
Flash Memory 256 Kbytes 256 Kbytes 256 Kbytes 256 Kbytes 256 Kbytes
SRAM 32 Kbytes 32 Kbytes 32 Kbytes 32 Kbytes 32 Kbytes
EEPROM 8 Kbytes 8 Kbytes 8 Kbytes 8 Kbytes 8 Kbytes
Operational Amplifiers 2 2 2 2 2

Diferenciadores clave

  • Integrated USB connectivity in an ultra-low-power STM32L1 design (frente a STM32L151CCT6)
  • Large memory configuration for embedded and USB firmware (frente a STM32L151CCT6)
  • Analog integration reduces external component count (frente a STM32L151CCT7TR)
  • Compact 7 x 7 mm LQFP footprint with substantial internal resources (frente a STM32L152CCT6A)

Notas de diseño

Route USB D+ and D- as a short, tightly coupled differential pair over a continuous reference plane. Use the USB impedance and geometry recommended for the selected PCB stack-up, minimize vias and stubs, and keep the pair away from switching nodes and high-current return paths. Place the USB support network and ESD protection close to the connector where practical. Confirm the final USB implementation against the manufacturer reference circuit and electrical requirements.

Place the required bypass capacitors immediately adjacent to the MCU power terminals and use the values and placement specified in the manufacturer hardware guidelines. Keep analog and digital return currents separated in the power distribution design, especially around ADC and DAC networks. Budget regulator quiescent current together with active and sleep-mode MCU current. This is especially important for battery products because a low-power MCU cannot compensate for an inefficient or poorly bypassed external supply network.

Assign ADC, DAC, LCD, USB, and operational-amplifier functions only after checking the complete alternate-function and pin-description tables. Confirm that exposed or shared pins have the correct analog or digital configuration before enabling peripherals. For sensitive analog inputs, use short traces, controlled ground references, and away-from-switching-node placement. Validate signal settling and accuracy with the actual source impedance, acquisition time, filtering, and firmware sampling sequence.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement was identified for the exact STM32L152CCT6 ordering code. Verify compliance documentation for the exact package and delivery option with the manufacturer.

Búsquedas relacionadas

STM32L152CCT6 datasheet STM32L152CCT6 pinout STM32L152CCT6 datasheet pdf STM32L152CCT6 equivalent STM32L152CCT6 replacement STM32L152CCT6 cross reference STM32L152CCT6 footprint STM32L152CCT6 application circuit STM32L152CCT6 price STM32L152CCT6 stock STMicroelectronics STM32L152CCT6 STM32L152CCT6 vs STM32L151CCT6 48-LQFP STM32L152CCT6 pinout STM32L152CCT6 32MHz 256KB

Componentes & términos relacionados

STMicroelectronics STM32L152CCT6 STM32L151CCT6 STM32L151CCT7TR STM32L152CCT7 STM32L152CCT6A STM32L152CC Arm Cortex-M3 microcontroller MCU 32-bit RISC ultra-low-power microcontroller USB LCD controller 12-bit ADC 12-bit DAC operational amplifier 256 Kbytes Flash 32 Kbytes SRAM 8 Kbytes EEPROM 48-LQFP LQFP family surface mount embedded control USB sensor node
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ