STM32L152CCT6 - 32MHz Cortex-M3 256KB MCU | STMicroelectronics
MPN: STM32L152CCT6 ✓ فعالSTM32L152CCT6 نمای کلی
An ultra-low-power microcontroller is a semiconductor device designed to maintain useful processing performance while minimizing energy consumption during active operation, sleep modes, and standby states. The STM32L1 family combines an Arm Cortex-M3 processor with power-management features intended for battery-operated, portable, industrial, medical, and sensor-based products. STM32L152CCT6 is positioned for designs requiring USB connectivity and a relatively large memory configuration without moving to a higher-performance MCU family.
The principal features include 32 MHz maximum CPU frequency, 256 Kbytes of embedded Flash, 32 Kbytes of SRAM, 8 Kbytes of EEPROM, USB, LCD interface capability, 12-bit ADC and DAC resources, and two operational amplifiers. The 48-LQFP package provides a conventional leaded surface-mount format suitable for industrial control boards, instruments, gateways, and compact embedded equipment. Its combination of USB, analog peripherals, and low-power processing makes it useful for portable data-acquisition and connected-control designs.
The STM32L152CCT6 uses the Arm Cortex-M3 architecture and supports a broad peripheral set for embedded control. USB connectivity allows the MCU to act as a USB device, while the LCD interface supports display-oriented products. The ADC and DAC provide analog measurement and output capability, and the integrated operational amplifiers can reduce external analog component count in suitable signal-conditioning circuits. Firmware can be organized around standard embedded-control tasks, USB connectivity, display updates, and sensor acquisition rather than requiring separate peripheral devices.
Typical applications include industrial sensor nodes, USB-to-serial data acquisition modules, compact instrumentation, medical monitoring equipment, battery-powered handheld products, USB-connected control panels, and low-energy embedded gateways. The 32 MHz core and 256 Kbytes of Flash provide useful headroom for protocol stacks and application firmware. The integrated analog resources are especially helpful where board area, standby power, and component count are important design constraints.
When laying out a design, place decoupling capacitors close to each supply pin and route USB differential pairs as a controlled-impedance, tightly coupled pair on a multilayer PCB. Confirm the exact pin assignment and alternate-function requirements in the manufacturer pinout table before assigning LCD, USB, ADC, DAC, or operational-amplifier functions. The MCU also requires the appropriate clock, reset, boot, and programming connections specified by STMicroelectronics.
This product summary combines manufacturer family information, distributor attributes, package details, connectivity features, and application-specific design guidance. It is intended to help engineers evaluate STM32L152CCT6 for USB-enabled, low-power embedded systems while separating confirmed device characteristics from parameters that still require review against the complete manufacturer datasheet.
جایگزینهای drop-in برای STM32L152CCT6 — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونهها در این سری
مدلهای همسری که جایگزین مستقیم هستند برای STM32L152CCT6 (همان فرمفاکتور و فوتپرینت) — متفاوت در Operational Amplifiers, Package, EEPROM, Flash Memory, SRAM.
STM32L151CCT6
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←STM32L151CCT7TR
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
STM32L152CCT7
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
STM32L152CCT6A
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
STM32L152CCT6 حداکثر مقادیر مجاز و مشخصات الکتریکی
| Product Type | 32-bit ARM Cortex-M3 microcontroller |
| Core | ARM Cortex-M3 |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 256 Kbytes |
| SRAM | 32 Kbytes |
| EEPROM | 8 Kbytes |
| Architecture | 32-bit RISC |
| USB | USB connectivity |
| LCD Support | LCD interface capability |
| ADC | 12-bit ADC |
| DAC | 12-bit DAC |
| Operational Amplifiers | 2 integrated operational amplifiers |
| ولتاژ تغذیه | 2.5 V to 3.3 V |
| بستهبندی | 48-LQFP, 7 x 7 mm |
| نوع نصب | Surface Mount |
راهنمای پیکربندی پین STM32L152CCT6 48-lqfp, 7 x 7 mm
پیکربندی پین برای STM32L152CCT6 (پکیج 48-lqfp, 7 x 7 mm). این IC دیجیتال شامل GPIO، رابطهای ارتباطی (UART، SPI، I2C) و پینهای تغذیه است. برای عملکردهای جایگزین پین و گزینههای پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستمهای نهفته و چیدمان PCB.
داده پینآوت تفصیلی موجود نیست برای STM32L152CCT6.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
STM32L152CCT6 مناسب است برای 6 کاربردs: USB Sensor Node, Industrial Data Acquisition, Medical Monitoring Equipment, Battery-Powered Handheld Device, USB Control Panel, Compact Instrumentation.
USB Sensor Node
The STM32L152CCT6 fits USB sensor nodes that acquire analog measurements and expose them to a host computer. Its 12-bit ADC, two operational amplifiers, 256 Kbytes of Flash, and 32 Kbytes of SRAM provide room for acquisition logic, calibration, and USB protocol firmware without requiring a separate microcontroller. The device is particularly useful when low-power operation and analog integration matter. Keep the analog inputs short and properly referenced, place decoupling near the supply pins, and route USB D+ and D- as a controlled-impedance differential pair. Validate the complete acquisition chain for noise, settling time, and USB enumeration under the intended operating conditions.
پیشنهادی
Industrial Data Acquisition
The STM32L152CCT6 is appropriate for compact industrial data-acquisition equipment that combines sensor conditioning, local control, and USB connectivity. The 32 MHz Arm Cortex-M3 processor can handle sampling control and communication firmware, while the integrated ADC, DAC, and two op amps reduce the number of external analog devices. Its 256 Kbytes of Flash accommodates protocol and application code in a 48-LQFP 7 x 7 mm footprint. Designers should isolate sensitive analog paths from USB and switching circuitry, provide stable references, and verify EMC and surge requirements appropriate to the installation environment before field deployment.
پیشنهادی
Medical Monitoring Equipment
The STM32L152CCT6 can serve as the control MCU in compact medical monitoring equipment where low-power processing, analog measurement, and a USB interface are required. Its 32-bit Cortex-M3 core supports responsive signal processing, while the 12-bit ADC, DAC, and two integrated operational amplifiers can simplify front-end integration. The 256 Kbytes of Flash and 32 Kbytes of SRAM support protocol handling, data buffering, and application code. Medical designs still require domain-specific risk analysis, verified measurement accuracy, electrical isolation where applicable, and compliance with the intended medical-device standard and regional requirements.
پیشنهادی
Battery-Powered Handheld Device
The STM32L152CCT6 is well matched to battery-powered handheld instruments because the STM32L1 family is designed around low-power operation and the MCU combines 256 Kbytes of Flash with extensive analog peripherals. The 12-bit ADC, DAC, and two op amps can replace separate conditioning components in suitable designs, while USB provides a convenient configuration and data-transfer path when the device is connected. To maximize battery life, select the appropriate sleep mode, disable unused peripherals, control GPIO states, and account for regulator quiescent current. Do not estimate run time from CPU frequency alone; use the manufacturer operating-current tables and the complete power budget.
پیشنهادی
USB Control Panel
The STM32L152CCT6 can implement a USB-connected control panel with local status indication, configuration, and diagnostics. Its LCD interface capability is useful for human-readable displays, and the ADC can monitor buttons, dividers, or analog control inputs. A 32 MHz Cortex-M3 core provides sufficient responsiveness for menu handling, state-machine control, and USB communication, while 256 Kbytes of Flash leaves room for protocol and application firmware. Verify the selected LCD interface pins against alternate-function tables, debounce external controls appropriately, and confirm USB suspend behavior so the panel enters the intended low-power state when disconnected.
پیشنهادی
Compact Instrumentation
The STM32L152CCT6 is suitable for compact laboratory and field instrumentation that combines a display, analog measurement, data logging, and USB connectivity. The integrated DAC supports stimulus generation or reference output, while the dual op amps can implement buffering, gain, or filtering stages when the signal path permits. At 32 MHz with 256 Kbytes of Flash, the device can handle embedded control, calibration tables, USB communication, and user-interface firmware in one package. Keep high-impedance analog nodes away from USB clocks and digital return currents, use a low-noise reference strategy, and test gain accuracy and noise across the intended measurement bandwidth.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای STM32L152CCT6 — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | STM32L151CCT6 | STM32L151CCT7TR | STM32L152CCT7 | STM32L152CCT6A |
|---|---|---|---|---|---|
| Package | 48-LQFP (7x7) | 48-LQFP (7x7) | 48-LQFP (7x7) | 48-LQFP (7x7) | 48-LQFP (7x7) |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| CPU Core | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 256 Kbytes | 256 Kbytes | 256 Kbytes | 256 Kbytes | 256 Kbytes |
| SRAM | 32 Kbytes | 32 Kbytes | 32 Kbytes | 32 Kbytes | 32 Kbytes |
| EEPROM | 8 Kbytes | 8 Kbytes | 8 Kbytes | 8 Kbytes | 8 Kbytes |
| Operational Amplifiers | 2 | 2 | 2 | 2 | 2 |
تفاوتهای کلیدی
- Integrated USB connectivity in an ultra-low-power STM32L1 design (در مقابلSTM32L151CCT6)
- Large memory configuration for embedded and USB firmware (در مقابلSTM32L151CCT6)
- Analog integration reduces external component count (در مقابلSTM32L151CCT7TR)
- Compact 7 x 7 mm LQFP footprint with substantial internal resources (در مقابلSTM32L152CCT6A)
یادداشتهای طراحی
Route USB D+ and D- as a short, tightly coupled differential pair over a continuous reference plane. Use the USB impedance and geometry recommended for the selected PCB stack-up, minimize vias and stubs, and keep the pair away from switching nodes and high-current return paths. Place the USB support network and ESD protection close to the connector where practical. Confirm the final USB implementation against the manufacturer reference circuit and electrical requirements.
Place the required bypass capacitors immediately adjacent to the MCU power terminals and use the values and placement specified in the manufacturer hardware guidelines. Keep analog and digital return currents separated in the power distribution design, especially around ADC and DAC networks. Budget regulator quiescent current together with active and sleep-mode MCU current. This is especially important for battery products because a low-power MCU cannot compensate for an inefficient or poorly bypassed external supply network.
Assign ADC, DAC, LCD, USB, and operational-amplifier functions only after checking the complete alternate-function and pin-description tables. Confirm that exposed or shared pins have the correct analog or digital configuration before enabling peripherals. For sensitive analog inputs, use short traces, controlled ground references, and away-from-switching-node placement. Validate signal settling and accuracy with the actual source impedance, acquisition time, filtering, and firmware sampling sequence.
اطلاعات انطباق
No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement was identified for the exact STM32L152CCT6 ordering code. Verify compliance documentation for the exact package and delivery option with the manufacturer.