STM32L433VCT6 - 80MHz Cortex-M4 256KB MCU | STMicroelectronics
N.º de pieza: STM32L433VCT6 ✓ ActivoSTM32L433VCT6 Descripción general
A microcontroller is a programmable system-on-chip that integrates a CPU core, memory, and peripherals into one package. The STM32L433 belongs to the STM32L4 family, where STM32 denotes the microcontrollers and microprocessors portfolio, L4 identifies the ultra-low-power performance class, and Cortex-M4 describes the 32-bit Arm processor architecture used by the device.
The STM32L433VCT6 combines 256 KB of Flash with 64 KB of SRAM and includes a floating-point unit for efficient arithmetic in control and signal-processing code. According to the STM32L433xx manufacturer datasheet, the device supports USB full-speed operation and an LCD interface. Low-power operation includes a 200 nA VBAT mode that maintains the RTC and 32 x 32-bit backup registers.
The Cortex-M4 core uses the Arm Thumb instruction set and operates at up to 80 MHz, providing 100 DMIPS as stated by STMicroelectronics. This processing capacity is suitable for control loops, human-interface firmware, sensor aggregation, communication gateways, and compact consumer devices that need more performance than a basic 8- or 16-bit controller.
Typical applications include low-power industrial sensor nodes, USB-connected data-acquisition products, compact LCD instruments, building controls, and portable battery-powered equipment. The 100-pin LQFP package exposes a broad peripheral set and avoids the fine-pitch complexity associated with very small leadless packages, making it practical for prototypes and medium-density mixed-signal boards.
Design with the STM32L433VCT6 by keeping decoupling capacitors close to the supply pins, reserving a low-noise analog supply path for sensitive analog sections, and validating USB impedance-controlled routing before fabrication. The manufacturer datasheet provides the definitive pin descriptions, alternate-function mappings, and decoupling recommendations for board implementation.
This product page consolidates the device specifications, package details, application guidance, and drop-in upgrade paths for engineers evaluating STM32L4 designs. It also highlights how Flash capacity, SRAM availability, low-power features, and USB support affect component selection when an existing board must be reused without layout changes.
Alternativas directas para STM32L433VCT6 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con STM32L433VCT6 (mismo factor de forma y huella) — difiere en Package, Product Type, SRAM.
STM32L476VCT6
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
STM32L496VCT6
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
STM32L475VCT6
✅ Sustitución directa ⚠️ Especificaciones sin verificarConsulte el precio
Ver hoja de datos →STM32L485VCT6
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
STM32L452VCT6
✅ Sustitución directa ⚠️ Especificaciones sin verificarConsulte el precio
Ver hoja de datos →STM32L433VCT6 Valores máximos y características eléctricas
| Product Type | 32-bit ultra-low-power microcontroller |
| CPU Core | Arm Cortex-M4 with FPU |
| Maximum CPU Frequency | 80 MHz |
| Performance | 100 DMIPS |
| Flash Memory | 256 KB |
| SRAM | 64 KB |
| Backup Registers | 32 x 32-bit |
| Supply Voltage Range | 1.71 V to 3.6 V |
| VBAT Mode Current | 200 nA |
| Rango de temperatura de funcionamiento | -40 °C to 85/105/125 °C |
| USB | USB full-speed |
| LCD Interface | Supported |
| External SMPS | Supported |
| Encapsulado | 100-pin LQFP, 14 x 14 mm |
| Tipo de montaje | Surface mount |
| Packaging | Tray |
Guía de configuración de pines de STM32L433VCT6 100-pin lqfp, 14 x 14 mm
Configuración de pines para STM32L433VCT6 (encapsulado 100-pin lqfp, 14 x 14 mm). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para STM32L433VCT6.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
STM32L433VCT6 es adecuado para 6 aplicacións: Low-Power Industrial Sensor Node, USB-Connected Data Acquisition, Embedded LCD Instrument Panel, Battery-Powered Portable Monitor, Building Control and HVAC Interface, Compact Communication Gateway.
Low-Power Industrial Sensor Node
The STM32L433VCT6 fits compact sensing equipment that must process several inputs while keeping standby power low. Its 80 MHz Cortex-M4 core provides 100 DMIPS for filtering and local control, while 64 KB of SRAM supports working buffers without requiring external memory. The 200 nA VBAT mode allows the RTC and 32 x 32-bit backup registers to remain powered while the main rail is removed. A 100-pin LQFP also provides convenient access to timers, ADCs, and communication peripherals without fine-pitch assembly.
Recomendado
USB-Connected Data Acquisition
USB full-speed support makes the STM32L433VCT6 suitable for instruments that transfer measurements to a host computer without a separate interface controller. The Cortex-M4 FPU accelerates filtering and fixed-point-to-float conversions, while 256 KB of Flash stores protocol, control, and calibration code. At 80 MHz and 100 DMIPS, the device can sample sensors and format results concurrently. Board designers should follow the USB layout guidance in the manufacturer datasheet and route the data lines as a controlled-impedance pair.
Recomendado
Embedded LCD Instrument Panel
The LCD interface and generous 100-pin package allow the STM32L433VCT6 to serve as the central controller in a compact display-based instrument. Its 80 MHz Cortex-M4 core can update the display while handling keypad input and measurement logic, and the 64 KB SRAM accommodates display and communication buffers. The 1.71 V to 3.6 V operating range supports low-voltage panel designs. Final pin assignments must be taken from the alternate-function table because several LCD and general-purpose signals can be multiplexed.
Recomendado
Battery-Powered Portable Monitor
For battery-operated monitors, the STM32L433VCT6 combines a 1.71 V minimum operating voltage with a dedicated 200 nA VBAT retention mode. The processor can enter low-power states between measurements, then resume control and display tasks through its low-power architecture. Its 256 KB of Flash supports application firmware, while 64 KB of SRAM is sufficient for many sensor-fusion and communication buffers. Choose the correct temperature-grade suffix for the environment and confirm average-current targets through power-mode measurements.
Recomendado
Building Control and HVAC Interface
The STM32L433VCT6 can coordinate sensors, actuators, and local communications in a building-control or HVAC interface module. Its 100-pin LQFP provides enough I/O for digital inputs, sensor interfaces, and communication peripherals, while the Cortex-M4 FPU handles proportional-control calculations and conversions. The 80 MHz operating point supports responsive control loops without moving the task to a higher-power processor class. Use the external SMPS option only when the system architecture and datasheet power requirements support it.
Recomendado
Compact Communication Gateway
The STM32L433VCT6 can act as a protocol gateway between a local sensor network and a USB host. Its 100 DMIPS Cortex-M4 performance supports packet processing and buffering, while 256 KB of Flash accommodates multiple protocol stacks and USB firmware. USB full-speed connectivity avoids a separate bridge IC when the system only requires full-speed operation. Validate throughput, suspend behavior, and bus-power requirements against the application using the manufacturer electrical and USB guidance.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para STM32L433VCT6 — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | STM32L476VCT6 | STM32L496VCT6 | STM32L475VCT6 | STM32L485VCT6 | STM32L452VCT6 |
|---|---|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 100-pin LQFP (14 x 14 mm) | 100-pin LQFP (14 x 14 mm) | 100-pin LQFP (14 x 14 mm) | 100-pin LQFP (14 x 14 mm) | 100-pin LQFP (14 x 14 mm) | 100-pin LQFP (14 x 14 mm) |
Diferenciadores clave
- Combines 80 MHz Cortex-M4 performance with low-power retention (frente a STM32L476VCT6)
- Broad peripheral access in an inspectable 100-pin LQFP (frente a STM32L452VCT6)
- Direct USB connectivity without a separate bridge (frente a STM32L475VCT6)
Notas de diseño
Use the manufacturer datasheet's decoupling and power-supply recommendations, placing each required capacitor immediately beside its associated VDD or VDDA pin. Keep analog and digital return paths under control even on a mixed-signal board. If the VBAT feature is used, isolate the backup supply correctly and verify the 200 nA VBAT-mode figure under the exact operating conditions rather than treating it as total board consumption.
The 100-pin LQFP footprint exposes substantially more pins than a 48-pin MCU and supports concurrent peripheral assignments, but routing density still requires careful planning. Group communications on one side where practical, keep sensitive analog inputs away from fast-switching USB and clock nets, and preserve the package pin-1 orientation marks. Validate the footprint against the mechanical drawing for the 14 x 14 mm LQFP package.
For USB full-speed operation, follow the STM32L433xx manufacturer layout guidance for the D+ and D- connection, including short matched routing, continuous reference plane, controlled impedance, and placement of the required series components. USB signal integrity problems frequently appear only after cable attachment or during suspend and resume, so test the finished board with representative accessories rather than relying only on low-speed electrical checks.
Do not assume that two STM32L4 devices with the same package are firmware-compatible without checking the pin, clock, and peripheral differences. The STM32 community replacement guidance specifically notes possible boot-pin differences even among otherwise compatible L4x6 devices. Before replacing the STM32L433VCT6, compare the alternate-function map, reset and boot behavior, supply requirements, and peripheral assignments, then rerun the complete firmware validation.
The 80 MHz Cortex-M4 core and the FPU make the STM32L433VCT6 fast enough for real-time filtering and control, but operating frequency also affects power consumption. Use the device's clock and low-power configuration to balance processing latency against current draw. For battery equipment, measure the complete system in its real operating modes, including sensor acquisition, radio activity, and VBAT retention, because the MCU value alone does not determine the product's average current.
Información de cumplimiento
The manufacturer datasheet identifies the industrial STM32L433xx family, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was established for this ordering code.