STMicroelectronics

STM32L433VCT6 - 80MHz Cortex-M4 256KB MCU | STMicroelectronics

MPN: STM32L433VCT6 ✓ Nakahanda
1.71 V to 3.6 V Vdss 200 nA Id 100-pin LQFP, 14 x 14 mm Package 80 MHz Speed 256 KB Memory
MOQ: 1 |

STM32L433VCT6 Ulas

STMicroelectronics STM32L433VCT6 is an ultra-low-power 32-bit Arm Cortex-M4 microcontroller with FPU, operating at up to 80 MHz and delivering 100 DMIPS. The device provides 256 KB of Flash memory and 64 KB of SRAM in a 100-pin LQFP package measuring 14 x 14 mm. Its operating supply range is 1.71 V to 3.6 V, with temperature grades extending to 125 °C.

A microcontroller is a programmable system-on-chip that integrates a CPU core, memory, and peripherals into one package. The STM32L433 belongs to the STM32L4 family, where STM32 denotes the microcontrollers and microprocessors portfolio, L4 identifies the ultra-low-power performance class, and Cortex-M4 describes the 32-bit Arm processor architecture used by the device.

The STM32L433VCT6 combines 256 KB of Flash with 64 KB of SRAM and includes a floating-point unit for efficient arithmetic in control and signal-processing code. According to the STM32L433xx manufacturer datasheet, the device supports USB full-speed operation and an LCD interface. Low-power operation includes a 200 nA VBAT mode that maintains the RTC and 32 x 32-bit backup registers.

The Cortex-M4 core uses the Arm Thumb instruction set and operates at up to 80 MHz, providing 100 DMIPS as stated by STMicroelectronics. This processing capacity is suitable for control loops, human-interface firmware, sensor aggregation, communication gateways, and compact consumer devices that need more performance than a basic 8- or 16-bit controller.

Typical applications include low-power industrial sensor nodes, USB-connected data-acquisition products, compact LCD instruments, building controls, and portable battery-powered equipment. The 100-pin LQFP package exposes a broad peripheral set and avoids the fine-pitch complexity associated with very small leadless packages, making it practical for prototypes and medium-density mixed-signal boards.

Design with the STM32L433VCT6 by keeping decoupling capacitors close to the supply pins, reserving a low-noise analog supply path for sensitive analog sections, and validating USB impedance-controlled routing before fabrication. The manufacturer datasheet provides the definitive pin descriptions, alternate-function mappings, and decoupling recommendations for board implementation.

This product page consolidates the device specifications, package details, application guidance, and drop-in upgrade paths for engineers evaluating STM32L4 designs. It also highlights how Flash capacity, SRAM availability, low-power features, and USB support affect component selection when an existing board must be reused without layout changes.

Mga alternatibo na pwedeng ilagay na STM32L433VCT6 — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok STM32L433VCT6 (parehas na form factor at footprint) — pagkakaiba sa Package, Product Type, SRAM.

STMicroelectronics
Package: LQFP-100 (14x14 mm)
SRAM: 160 KB
Ikabit sa STM32L433VCT6 →
STMicroelectronics
Product Type: Ultra-low-power 32-bit microcontroller
Ikabit sa STM32L433VCT6 →

STM32L476VCT6

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 100-pin LQFP (14 x 14 mm)
Same 100-pin LQFP footprint and Cortex-M4 class, but the STM32L476VCT6 adds higher-end STM32L4 peripherals; the exact memory and peripheral deltas must be confirmed against the ordering tables

📋 Alternatibo na Reference (hindi sa katalogo)

STM32L496VCT6

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 100-pin LQFP (14 x 14 mm)
Same 100-pin LQFP package and STM32L4 architecture, with a higher-feature device configuration; clock, peripheral, and memory differences require firmware and schematic review

📋 Alternatibo na Reference (hindi sa katalogo)

STM32L475VCT6

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
STMicroelectronics
📦 100-pin LQFP (14 x 14 mm)
Ultra-low-power 32-bit microcontroller · Arm Cortex-M4 · 32-bit RISC · 80 MHz · 256 KB (256K x 8) · Single precision · Supported · USB OTG

Magkontak para sa presyo

Tingnan ang Datasheet →

STM32L485VCT6

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 100-pin LQFP (14 x 14 mm)
Same STM32L4 family and 100-pin LQFP footprint, with a different peripheral and feature configuration; verify pin multiplexing and firmware initialization

📋 Alternatibo na Reference (hindi sa katalogo)

STM32L452VCT6

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
STMicroelectronics
📦 100-pin LQFP (14 x 14 mm)
ARM Cortex-M4 with FPU · 80 MHz · 256 KB · 160 KB · 1.71 V to 3.6 V · 51 · 12-bit, 5 Msps, 16 channels · 2 x 12-bit

Magkontak para sa presyo

Tingnan ang Datasheet →

STM32L433VCT6 Mga Pinakamataas na Rating at Electrical Characteristics

Product Type 32-bit ultra-low-power microcontroller
CPU Core Arm Cortex-M4 with FPU
Maximum CPU Frequency 80 MHz
Performance 100 DMIPS
Flash Memory 256 KB
SRAM 64 KB
Backup Registers 32 x 32-bit
Supply Voltage Range 1.71 V to 3.6 V
VBAT Mode Current 200 nA
Hanay ng Temperature na Operasyon -40 °C to 85/105/125 °C
USB USB full-speed
LCD Interface Supported
External SMPS Supported
Packhaging 100-pin LQFP, 14 x 14 mm
Uri ng Pagpapasok Surface mount
Packaging Tray

Gabay sa Pin Configuration ng STM32L433VCT6 100-pin lqfp, 14 x 14 mm

Pin configuration para sa STM32L433VCT6 (100-pin lqfp, 14 x 14 mm package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.

Pinout diagram ng 100-pin lqfp, 14 x 14 mm package para sa STM32L433VCT6

Wala ng detalyadong pinout data na magagamit para sa STM32L433VCT6.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

STM32L433VCT6 ay nararapat para sa 6 aplikasyons: Low-Power Industrial Sensor Node, USB-Connected Data Acquisition, Embedded LCD Instrument Panel, Battery-Powered Portable Monitor, Building Control and HVAC Interface, Compact Communication Gateway.

🏭

Low-Power Industrial Sensor Node

The STM32L433VCT6 fits compact sensing equipment that must process several inputs while keeping standby power low. Its 80 MHz Cortex-M4 core provides 100 DMIPS for filtering and local control, while 64 KB of SRAM supports working buffers without requiring external memory. The 200 nA VBAT mode allows the RTC and 32 x 32-bit backup registers to remain powered while the main rail is removed. A 100-pin LQFP also provides convenient access to timers, ADCs, and communication peripherals without fine-pitch assembly.

🖥️

USB-Connected Data Acquisition

USB full-speed support makes the STM32L433VCT6 suitable for instruments that transfer measurements to a host computer without a separate interface controller. The Cortex-M4 FPU accelerates filtering and fixed-point-to-float conversions, while 256 KB of Flash stores protocol, control, and calibration code. At 80 MHz and 100 DMIPS, the device can sample sensors and format results concurrently. Board designers should follow the USB layout guidance in the manufacturer datasheet and route the data lines as a controlled-impedance pair.

📺

Embedded LCD Instrument Panel

The LCD interface and generous 100-pin package allow the STM32L433VCT6 to serve as the central controller in a compact display-based instrument. Its 80 MHz Cortex-M4 core can update the display while handling keypad input and measurement logic, and the 64 KB SRAM accommodates display and communication buffers. The 1.71 V to 3.6 V operating range supports low-voltage panel designs. Final pin assignments must be taken from the alternate-function table because several LCD and general-purpose signals can be multiplexed.

📱

Battery-Powered Portable Monitor

For battery-operated monitors, the STM32L433VCT6 combines a 1.71 V minimum operating voltage with a dedicated 200 nA VBAT retention mode. The processor can enter low-power states between measurements, then resume control and display tasks through its low-power architecture. Its 256 KB of Flash supports application firmware, while 64 KB of SRAM is sufficient for many sensor-fusion and communication buffers. Choose the correct temperature-grade suffix for the environment and confirm average-current targets through power-mode measurements.

🏠

Building Control and HVAC Interface

The STM32L433VCT6 can coordinate sensors, actuators, and local communications in a building-control or HVAC interface module. Its 100-pin LQFP provides enough I/O for digital inputs, sensor interfaces, and communication peripherals, while the Cortex-M4 FPU handles proportional-control calculations and conversions. The 80 MHz operating point supports responsive control loops without moving the task to a higher-power processor class. Use the external SMPS option only when the system architecture and datasheet power requirements support it.

🌐

Compact Communication Gateway

The STM32L433VCT6 can act as a protocol gateway between a local sensor network and a USB host. Its 100 DMIPS Cortex-M4 performance supports packet processing and buffering, while 256 KB of Flash accommodates multiple protocol stacks and USB firmware. USB full-speed connectivity avoids a separate bridge IC when the system only requires full-speed operation. Validate throughput, suspend behavior, and bus-power requirements against the application using the manufacturer electrical and USB guidance.

What is the maximum operating frequency of the STM32L433VCT6?
The STM32L433VCT6 operates at up to 80 MHz using its 32-bit Arm Cortex-M4 processor with a floating-point unit. According to the STM32L433xx manufacturer datasheet, the core can deliver 100 DMIPS. This performance level supports responsive control loops, data acquisition, USB connectivity, and moderately complex human-interface firmware while retaining the low-power characteristics of the STM32L4 family.
How much memory does the STM32L433VCT6 have?
The STM32L433VCT6 provides 256 KB of Flash memory and 64 KB of SRAM. Flash holds the application firmware and boot code, while SRAM is used for working data and the stack. STMicroelectronics describes the device as a 32-bit microcontroller with an Arm Cortex-M4 core, 100 DMIPS performance, USB full-speed, LCD support, and an external switched-mode power-supply option.
What package does the STM32L433VCT6 use?
The STM32L433VCT6 is supplied in a 100-pin LQFP package measuring 14 x 14 mm. The package is shown as surface mount and is listed in a tray for the identified ordering code. A 100-pin LQFP provides a practical balance between peripheral access, soldering inspection, and board-routing flexibility for prototypes and mixed-signal control products.
What is the supply voltage range of the STM32L433VCT6?
The STM32L433VCT6 operates from 1.71 V to 3.6 V. This range is identified in the STM32L433xx manufacturer datasheet and supports both low-voltage energy-saving operation and conventional 3.3 V system rails. Use the datasheet power-supply and decoupling guidance to select the correct regulator and capacitor values for the voltage used on the board.
Does the STM32L433VCT6 support USB and LCD interfaces?
Yes. The STM32L433VCT6 supports USB full-speed operation and an LCD interface, as stated in the STM32L433xx manufacturer datasheet. USB can provide a direct connection to a host or peripheral, while the LCD interface suits compact instruments that require an embedded display. Exact peripheral multiplexing and pin assignments must be confirmed in the device pin and alternate-function tables.
What are the key specifications engineers should know about the STM32L433VCT6?
The STM32L433VCT6 combines an 80 MHz Arm Cortex-M4 core, 100 DMIPS performance, 256 KB of Flash, 64 KB of SRAM, and a 1.71 V to 3.6 V supply range in a 100-pin LQFP package. STMicroelectronics also identifies USB full-speed, LCD, external SMPS, and 200 nA VBAT operation as notable device features, making it a strong fit for low-power control and connected sensor products.
How much current does the STM32L433VCT6 draw in VBAT mode?
The STM32L433VCT6 consumes 200 nA in VBAT mode. According to the STM32L433xx manufacturer datasheet, this mode supplies the RTC and 32 x 32-bit backup registers while the main supply can be removed. It is therefore useful in alarm, sensing, and maintenance applications where the system must retain timekeeping and critical state during a low-power shutdown.
Where can I download the STM32L433VCT6 datasheet PDF?
The official STM32L433xx datasheet PDF is available from the STMicroelectronics product document at https://www.st.com/resource/en/datasheet/stm32l433cc.pdf. Use that document for the authoritative 100-pin pinout, alternate-function table, electrical characteristics, Flash limits, clock tree, and decoupling requirements. The product page for STM32L433VC provides supporting ordering and device information.
Where can I find the STM32L433VCT6 pinout?
The STM32L433VCT6 pinout is documented in the pin-description and alternate-function sections of the official STM32L433xx manufacturer datasheet. The device uses a 100-pin LQFP arrangement. Use the pin-description table when assigning PCB tracks because several pins support multiple peripheral functions through programmable alternate-function mapping.
Where can I buy the STM32L433VCT6 online?
The STM32L433VCT6 can be requested through the Request a Quote form on this page. The form lets you specify the required quantity and obtain a current commercial response for the exact 100-pin LQFP ordering code. Request the current lead time and stock position with the quote because component availability can change independently of published technical specifications.
What is the price of the STM32L433VCT6?
Use the Request a Quote form on this page for the current commercial price of the STM32L433VCT6. The form accepts the exact MPN and requested quantity, allowing the quote to reflect current sourcing conditions. Pricing and availability for this microcontroller are time-sensitive and should be confirmed through the quotation process rather than treated as a permanent fixed value.
What is the lead time for the STM32L433VCT6?
Request the current lead time through the Request a Quote form on this page. The form should identify the exact STM32L433VCT6 ordering code and your required quantity. Lead time can vary with order volume, regional inventory, and manufacturing schedules, so obtain a written response for the shipment plan rather than assuming a fixed delivery interval.
Is the STM32L433VCT6 in stock?
Current stock status for the STM32L433VCT6 should be confirmed through the Request a Quote form on this page. Submit the exact MPN and quantity so the quotation can reflect the latest availability. The manufacturer lists the STM32L433VC family product, while live channel inventory is not represented by the product page itself.
What is the best drop-in replacement for the STM32L433VCT6?
STM32L476VCT6 is the closest upgrade path because it retains the 100-pin LQFP format and higher-memory STM32L4 footprint while adding application-specific peripheral options. Confirm pin mapping, clock configuration, and firmware requirements before substitution. A true drop-in decision must also account for peripheral differences, clock-tree changes, and any revised pin multiplexing introduced by the higher-feature device.
Can STM32L476VCT6 replace STM32L433VCT6 without changing the PCB?
The STM32L476VCT6 can share the 100-pin LQFP footprint with the STM32L433VCT6 and is a practical upgrade candidate for designs needing more STM32L4 capabilities. However, footprint retention does not guarantee identical behavior: review the alternate-function map, power-management behavior, and firmware initialization in the manufacturer datasheets. The ST community guidance notes that even L4x6 devices can differ in boot-pin behavior.
Is the STM32L433VCT6 the same as the STM32L433VCT7?
No. The final ordering suffix identifies different orderable configurations, and a design substitution should be evaluated from the specific pin, temperature, and packing data for each MPN. Do not interchange suffixes based only on the shared STM32L433VC family name. Compare the complete ordering information and datasheet limits in the STMicroelectronics product documentation before releasing a purchase order.

Impormasyon ng Talumpati sa Engineering for STM32L433VCT6 — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the STM32L433VCT6 when a design needs the combination of an 80 MHz Cortex-M4 core, 256 KB of Flash, 64 KB of SRAM, USB full-speed, an LCD interface, and very low VBAT retention current in a 100-pin LQFP package. It is well suited to connected sensors, compact instruments, and battery-operated controllers. Choose the STM32L476VCT6 or STM32L496VCT6 when the PCB can stay unchanged but the application needs more advanced STM32L4 peripherals or features. Choose the STM32L475VCT6 or STM32L485VCT6 when their specific peripheral mix better matches the design. Choose the STM32L452VCT6 for a lower-feature STM32L4 configuration in the same footprint. In every case, validate pin multiplexing, boot behavior, clocks, firmware initialization, and qualification requirements before treating a substitution as drop-in.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto STM32L476VCT6 STM32L496VCT6 STM32L475VCT6 STM32L485VCT6 STM32L452VCT6
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
Package 100-pin LQFP (14 x 14 mm) 100-pin LQFP (14 x 14 mm) 100-pin LQFP (14 x 14 mm) 100-pin LQFP (14 x 14 mm) 100-pin LQFP (14 x 14 mm) 100-pin LQFP (14 x 14 mm)

Pangunahing mga Pagkakaiba

  • Combines 80 MHz Cortex-M4 performance with low-power retention (kumpara saSTM32L476VCT6)
  • Broad peripheral access in an inspectable 100-pin LQFP (kumpara saSTM32L452VCT6)
  • Direct USB connectivity without a separate bridge (kumpara saSTM32L475VCT6)

Talaan ng Disenyo

Use the manufacturer datasheet's decoupling and power-supply recommendations, placing each required capacitor immediately beside its associated VDD or VDDA pin. Keep analog and digital return paths under control even on a mixed-signal board. If the VBAT feature is used, isolate the backup supply correctly and verify the 200 nA VBAT-mode figure under the exact operating conditions rather than treating it as total board consumption.

The 100-pin LQFP footprint exposes substantially more pins than a 48-pin MCU and supports concurrent peripheral assignments, but routing density still requires careful planning. Group communications on one side where practical, keep sensitive analog inputs away from fast-switching USB and clock nets, and preserve the package pin-1 orientation marks. Validate the footprint against the mechanical drawing for the 14 x 14 mm LQFP package.

For USB full-speed operation, follow the STM32L433xx manufacturer layout guidance for the D+ and D- connection, including short matched routing, continuous reference plane, controlled impedance, and placement of the required series components. USB signal integrity problems frequently appear only after cable attachment or during suspend and resume, so test the finished board with representative accessories rather than relying only on low-speed electrical checks.

Do not assume that two STM32L4 devices with the same package are firmware-compatible without checking the pin, clock, and peripheral differences. The STM32 community replacement guidance specifically notes possible boot-pin differences even among otherwise compatible L4x6 devices. Before replacing the STM32L433VCT6, compare the alternate-function map, reset and boot behavior, supply requirements, and peripheral assignments, then rerun the complete firmware validation.

The 80 MHz Cortex-M4 core and the FPU make the STM32L433VCT6 fast enough for real-time filtering and control, but operating frequency also affects power consumption. Use the device's clock and low-power configuration to balance processing latency against current draw. For battery equipment, measure the complete system in its real operating modes, including sensor acquisition, radio activity, and VBAT retention, because the MCU value alone does not determine the product's average current.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The manufacturer datasheet identifies the industrial STM32L433xx family, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was established for this ordering code.

Data napatotohanan sa: 2026-11-14 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

STM32L433VCT6 datasheet STM32L433VCT6 datasheet pdf STM32L433VCT6 pinout STM32L433VCT6 specifications STM32L433VCT6 100 pin LQFP STM32L433VCT6 256KB flash STM32L433VCT6 80MHz Cortex-M4 STM32L433VCT6 supply voltage STM32L433VCT6 USB full speed STM32L433VCT6 equivalent STM32L433VCT6 replacement STM32L433VCT6 vs STM32L476VCT6 STM32L433VCT6 price STM32L433VCT6 stock STMicroelectronics STM32L433VCT6

Mga kaugnay na Mga Komponente at mga Tuntunin

STMicroelectronics STM32L433VCT6 STM32L433xx STM32L4 Arm Cortex-M4 Cortex-M4 FPU 32-bit RISC core Thumb instruction set ultra-low-power microcontroller MCU microcontroller embedded processor semiconductor 256 KB Flash 64 KB SRAM 100 DMIPS USB full-speed LCD interface external SMPS RTC backup registers VBAT mode 100-pin LQFP 14 x 14 mm package surface mount
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ