STM8L151G4U3 - 16MHz 16KB Ultra-Low-Power MCU | STMicroelectronics
N.º de pieza: STM8L151G4U3 ✓ ActivoSTM8L151G4U3 Descripción general
An ultra-low-power microcontroller is an integrated circuit designed to execute firmware while minimizing energy consumption. The STM8L family combines an 8-bit CPU, embedded nonvolatile memory, analog and digital peripherals, and low-power operating modes in one device. This positions the STM8L151G4U3 within the hierarchy of microcontroller, embedded processor, semiconductor, and low-power system-on-chip design.
Key features include 16 KB of Flash, a 16 MHz CPU, and up to 1 KB of data EEPROM. The peripheral set described for this device includes an RTC, LCD support, timers, USART, I2C, SPI, ADC, DAC, and comparators. These integrated resources can reduce external component requirements in meter, sensor-node, industrial-control, and low-power consumer designs.
The STM8L architecture provides a compact CISC-based platform with a broad selection of communications, timing, analog-conversion, and display-related peripherals. Because the verified product information identifies the part as an 8-bit ultra-low-power MCU, it is particularly appropriate for control tasks that require deterministic peripheral access and low standby power rather than the processing throughput of a 32-bit Cortex-M processor.
Typical applications include low-power sensing nodes, compact industrial controllers, battery-powered meters, panel-control systems, and communication-enabled sensor modules. The integrated USART, I2C, and SPI interfaces support serial sensors and transceivers, while the ADC, DAC, and comparators enable local measurement, signal generation, and threshold detection without requiring separate analog devices.
Designers should verify the exact pin multiplexing, clock configuration, low-power current, and peripheral operating limits in the manufacturer datasheet before layout freeze. A 28-pin UFQFPN also requires careful escape-routing and inspection because its fine-pitch pads are not suitable for conventional hand soldering without appropriate equipment and process control.
This product page consolidates verified distributor pricing, package information, lifecycle-oriented selection guidance, and traceable comparison data with practical design notes. It is intended to help engineers identify the correct low-power MCU and evaluate genuinely same-package alternatives without implying that different architectures or package variants are drop-in replacements.
Alternativas directas para STM8L151G4U3 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con STM8L151G4U3 (mismo factor de forma y huella) — difiere en Flash Memory, Package, Product Type.
STM8L151G4Y3TR
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
STM8L151G4U6
✅ Sustitución directa ⚠️ Especificaciones sin verificarConsulte el precio
Ver hoja de datos →STM8L151G4U3 Valores máximos y características eléctricas
| Product Type | Ultra-low-power 8-bit microcontroller |
| Manufacturer | STMicroelectronics |
| Maximum CPU Frequency | 16 MHz |
| Flash Memory | 16 KB (16K x 8 bits) |
| Data EEPROM | Up to 1 KB |
| Tensión de alimentación de funcionamiento | 1.8 V to 3.6 V |
| Nominal Supply Levels | 2.5 V and 3.3 V |
| CPU Architecture | 8-bit STM8 CISC |
| Encapsulado | 28-pin UFQFPN |
| Package Dimensions | 4 mm x 4 mm x 0.6 mm |
| Tipo de montaje | Surface mount |
| Real-Time Clock | Integrated |
| LCD Support | Integrated LCD interface support |
| Serial Interfaces | USART, I2C, and SPI |
| Analog Peripherals | ADC, DAC, and comparators |
| Timers | Integrated timers |
Guía de configuración de pines de STM8L151G4U3 4 mm x 4 mm x 0.6 mm
Configuración de pines para STM8L151G4U3 (encapsulado 4 mm x 4 mm x 0.6 mm). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para STM8L151G4U3.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
STM8L151G4U3 es adecuado para 6 aplicacións: Battery-Powered Environmental Sensor Nodes, Compact Industrial Measurement and Control, Low-Power Utility and Smart Meters, Human-Machine Panel Controllers, Battery-Powered Security and Access Controls, Connected Sensing and Communications Modules.
Battery-Powered Environmental Sensor Nodes
The STM8L151G4U3 fits environmental sensor nodes because its 1.8 V to 3.6 V operating range supports low-voltage battery-derived systems, while the integrated ADC and comparators can handle sensor conditioning and threshold events. The 16 MHz 8-bit CPU provides enough performance for sampling, filtering, and local control without requiring a more complex processor. Its USART, I2C, and SPI interfaces can connect environmental sensors and radio or communications modules. A practical implementation should use the device's low-power modes and RTC, but the exact sleep-current budget must be confirmed in the manufacturer datasheet before predicting battery life.
Recomendado
Compact Industrial Measurement and Control
The STM8L151G4U3 is suitable for compact industrial measurement and control systems that need local analog conversion, timed events, and serial communications in one package. Its ADC, DAC, comparators, timers, and RTC can support signal acquisition, threshold detection, local excitation, and scheduled control functions. The 16 KB Flash capacity is appropriate for focused firmware, while the 28-pin UFQFPN format limits board area. Because industrial products may require wider temperature and EMC qualification than the supplied listings establish, engineers should verify the exact temperature grade, isolation strategy, surge exposure, and production-test requirements before deployment.
Recomendado
Low-Power Utility and Smart Meters
The STM8L151G4U3 can serve as the control MCU in a compact smart meter because it combines an RTC, timers, ADC, comparators, and multiple serial interfaces within an ultra-low-power 8-bit platform. The RTC and timers can organize measurement and reporting intervals, while I2C can connect a metering or display IC and USART or SPI can support external sensors. Its 1.8 V to 3.6 V supply range can simplify low-voltage front-end design. Metering accuracy ultimately depends on the selected reference, analog network, crystal, and calibration method, none of which should be assumed from the MCU's general specifications.
Recomendado
Human-Machine Panel Controllers
The STM8L151G4U3 is appropriate for a small human-machine panel because the verified peripheral set includes LCD support, timers, ADC, comparators, and USART. It can scan inputs, drive a display through the dedicated interface, monitor analog controls, and communicate with a higher-level controller. The 4 mm by 4 mm UFQFPN package helps reduce the footprint where panel space is constrained, although fine-pitch assembly demands suitable PCB layout and manufacturing controls. Firmware should be organized to manage display updates within the available timing budget, and every multiplexed pin must be confirmed against the official package diagram.
Recomendado
Battery-Powered Security and Access Controls
The STM8L151G4U3 can support a compact battery-powered access-control peripheral because it combines low-voltage operation, an RTC, timers, ADC, comparators, and serial interfaces in a small package. The MCU can supervise a keypad, sense a contact or analog input, maintain time-based access schedules, and report events through a wired communications module. Its low-power 8-bit architecture is appropriate for continuous supervisory tasks, but standby-current requirements and wake-up latency must be obtained from the manufacturer datasheet. Security deployments should also add appropriate authentication and physical protection rather than relying on the MCU alone.
Recomendado
Connected Sensing and Communications Modules
The STM8L151G4U3 fits compact connected-sensing modules that combine local measurement with a serial transceiver. USART, I2C, and SPI allow connection to radio, network, or storage components without relying on a single communication topology, while the ADC and comparators support signal conditioning close to the sensing element. The 28-pin 4 mm by 4 mm package helps maintain a small module footprint, and the 16 MHz core can supervise data acquisition and protocol handling. Firmware and hardware must prevent radio transients from corrupting analog measurements, so grounding, filtering, and power-rail separation should be planned alongside the MCU placement.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para STM8L151G4U3 — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | STM8L151G4Y3TR | STM8L151G4U6 |
|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 28-pin UFQFPN | 28-pin UFQFPN - same package format | 28-pin UFQFPN - same package format |
| Product Type | Ultra-low-power 8-bit microcontroller | STM8L151G4 family 8-bit microcontroller | STM8L151G4 family 8-bit microcontroller |
| Ordering-Code Grade | U3 | Y3TR; confirm temperature and reel ordering details | U6; confirm grade-specific electrical limits |
Diferenciadores clave
- Verified 16 MHz performance in an ultra-low-power 8-bit platform (frente a STM8L151G4U6)
- Single confirmed advertised unit price (frente a STM8L151G4Y3TR)
- Broad integrated peripheral set for compact control products (frente a STM8L151G4Y3TR)
Notas de diseño
Reserve the 28-pin UFQFPN land pattern and exposed-pad connection exactly as specified by the manufacturer. Keep power and ground pads short, connect the ground structure to the thermal pad when the package drawing requires it, and route high-current or noisy outputs away from analog inputs. Because the verified data confirms a 4 mm by 4 mm UFQFPN but does not provide a complete pin table, do not infer exposed-pad electrical requirements from generic QFN conventions.
Design the supply network for the documented 1.8 V to 3.6 V operating range and place local input and output decoupling close to the appropriate package pins. The exact capacitor values, ESR requirements, and low-current limits must come from the manufacturer datasheet. If the MCU is powered from a battery, include a regulator with suitable quiescent current and verify the brownout behavior against the system's minimum operating voltage rather than assuming the nominal 1.8 V minimum covers every startup condition.
Treat the ADC, DAC, comparator, RTC, and communications pins as separate layout groups. Use a quiet ground reference for analog circuitry, minimize shared copper paths between analog sources and digital switching nodes, and place analog filtering components near the relevant pins. The integrated analog peripherals reduce external component count but do not remove PCB-level noise control. Confirm the package's pin multiplexing and analog recommendations directly from the official STM8L151G4 documentation before finalizing placement.
Do not treat a related STM8L151G4 suffix as automatically interchangeable. Ordering codes can encode temperature grade, package, and shipment form, while family members can differ in flash size and peripheral population. For STM8L151G4Y3TR and STM8L151G4U6, compare the complete ST ordering table, electrical characteristics, pin definitions, and lifecycle status. Also avoid using the DigiKey cross-reference search page as proof of pin compatibility; it is a discovery tool, while the manufacturer datasheet is the controlling source.
Información de cumplimiento
The supplied verified snippets do not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Compliance must be confirmed using the current STMicroelectronics product documentation or declaration for the exact ordering code.
