STM8S903F3U6TR - 16MHz 8-Bit 8KB MCU | STMicroelectronics
N.º de pieza: STM8S903F3U6TR ✓ ActivoSTM8S903F3U6TR Descripción general
An 8-bit microcontroller is a compact embedded-processing component that combines a processor core, nonvolatile program memory, data memory, and peripherals on one integrated circuit. The STM8S family belongs to the broader hierarchy of microcontrollers, embedded processors, and semiconductor devices. It is intended for cost-sensitive control applications in which deterministic peripheral access, low power consumption, and simple tool-driven firmware development are more important than high computational throughput.
The STM8S903F3U6TR includes a 10-bit ADC, 16 I/O ports, two timers, UART, SPI, and I²C interfaces. Its 8 KB Flash supports application firmware, while 1 KB of RAM provides working memory for control logic and data buffering. Integrated true data EEPROM of 640 bytes allows calibration values, configuration parameters, and other frequently changed data to be retained without an external memory component. The 3 mm by 3 mm UFQFPN package supports space-constrained board layouts.
The device family combines an 8-bit STM8 architecture with a maximum 16 MHz clock and a 2.95 V to 5.5 V supply range. This operating range accommodates regulated 3.3 V and 5 V industrial or consumer systems. Its mixed-signal and serial-interface resources allow the MCU to acquire analog measurements and communicate with sensors, displays, converters, and external controllers without requiring several discrete interface components.
Typical uses include compact industrial controllers, sensor-interface modules, motor and actuator controllers, communication equipment, consumer accessories, and low-cost embedded control panels. The 10-bit ADC is useful for monitoring analog inputs such as potentiometers, dividers, and sensors, while UART, SPI, and I²C support different levels of external connectivity. The small package also makes the MCU suitable for USB dongles, compact instruments, and densely populated control boards.
PCB design should account for the exposed-pad thermal connection and place input and output decoupling capacitors close to the relevant supply pins. Firmware development requires an STM8-compatible toolchain and programming interface, while application code must be checked against the STM8S903F3 datasheet pin descriptions and electrical limits. The 16 MHz clock and 2.95 V to 5.5 V range should be used consistently when selecting oscillators, regulators, and communication peripherals.
This page consolidates the key electrical, memory, package, interface, replacement, comparison, and design information for engineers evaluating the STM8S903F3U6TR. It also identifies where pin-level details, thermal design data, pricing, and lifecycle details require direct confirmation before production release.
Alternativas directas para STM8S903F3U6TR — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
STM8S903F3U3TR
✅ Sustitución directa ⚠️ Especificaciones sin verificarConsulte el precio
Ver hoja de datos →STM8S903F3U6TR Valores máximos y características eléctricas
| Product Type | 8-bit microcontroller (MCU) |
| Architecture | STM8 8-bit CISC |
| Maximum Clock Speed | 16 MHz |
| Flash Program Memory | 8 KB (8K x 8) |
| RAM | 1 KB |
| Integrated EEPROM | 640 bytes |
| ADC Resolution | 10 bits |
| Timer Count | 2 timers |
| Serial Interfaces | UART, SPI, and I²C |
| I/O Port Count | 16 ports |
| Tensión de alimentación de funcionamiento | 2.95 V to 5.5 V |
| Encapsulado | 20-pin UFQFPN, 3 mm x 3 mm |
| Tipo de montaje | Surface mount |
| Packaging | Tape and reel |
| Estado del ciclo de vida | Active |
| Estado RoHS | Compliant |
Guía de configuración de pines de STM8S903F3U6TR 20-pin ufqfpn, 3 mm x 3 mm
Configuración de pines para STM8S903F3U6TR (encapsulado 20-pin ufqfpn, 3 mm x 3 mm). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para STM8S903F3U6TR.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
STM8S903F3U6TR es adecuado para 6 aplicacións: Compact Sensor Interface Modules, Industrial Control Panels, Motor and Actuator Controllers, Communication and Gateway Accessories, Battery-Powered Portable Instruments, Consumer Accessories and Embedded Controls.
Compact Sensor Interface Modules
The STM8S903F3U6TR fits compact sensor modules that need local acquisition, configuration storage, and serial reporting without using a larger microcontroller package. Its 10-bit ADC can process analog sensor outputs, while 1 KB of RAM supports short-lived measurement buffers and the 640-byte EEPROM can retain calibration or device settings. UART, SPI, and I²C provide options for connecting a sensor, display, or external host. The 3 mm by 3 mm UFQFPN preserves board area, although its exposed pad and 16 I/O ports require careful footprint design. A 3.3 V implementation fits the 2.95 V to 5.5 V operating range and can simplify integration with low-power sensors and portable laboratory equipment.
Industrial Control Panels
The STM8S903F3U6TR is appropriate for small industrial control panels that scan analog inputs, operate timers, and communicate with remote equipment. Its 16 MHz maximum clock supports responsive state-machine and supervisory control, while the two timers can support periodic sampling, timing, or basic output control. The 10-bit ADC provides sufficient resolution for many process-monitoring signals, and UART, SPI, or I²C can connect a local display, sensor network, or service interface. Operation across 2.95 V to 5.5 V accommodates common industrial supply rails. Designers should verify transient immunity, grounding, and input protection at the connector because those requirements are not determined solely by the nominal operating voltage.
Motor and Actuator Controllers
The STM8S903F3U6TR can serve as the supervisory controller in compact motor, valve, and actuator designs where the 8-bit core is sufficient for sequencing and feedback logic. Two timers support periodic control tasks, the 16 I/O ports can accept position or limit inputs, and the ADC can monitor current, position, or analog sensor feedback. Serial interfaces allow connection to a higher-level controller or communications transceiver. The MCU is especially useful when the design needs local logic more than intensive computation. Its small 3 mm by 3 mm package helps reduce controller-board area, but motor systems also require separate power-stage protection, appropriate grounding, and logic-level verification between the 2.95 V to 5.5 V MCU domain and external circuitry.
Communication and Gateway Accessories
The STM8S903F3U6TR is suitable for small protocol adapters and communication accessories that translate between a host interface and a local embedded subsystem. UART offers straightforward serial connectivity, SPI supports faster peripheral transfers, and I²C accommodates common sensors and configuration devices. The 8 KB Flash can hold a focused firmware image, while 640 bytes of EEPROM can preserve addressing, calibration, or endpoint settings. Operating at up to 16 MHz allows protocol handling and supervisory logic to coexist in a compact design. The 20-pin UFQFPN is useful in dongles and portable modules, although final RF, connector, and supply design must follow the relevant interface specifications rather than being inferred from the MCU ratings.
Battery-Powered Portable Instruments
The STM8S903F3U6TR can support battery-powered instruments where low cost, compactness, and mixed-signal control are priorities. Its 2.95 V minimum operating voltage allows use with regulated 3.3 V rails, while the small UFQFPN package minimizes PCB footprint in handheld products. The 10-bit ADC can monitor battery or sensor voltages, and the serial interfaces can communicate with a display, data logger, or configuration host. Low-power operating modes and current consumption should be selected directly from the manufacturer datasheet because the final battery life depends on duty cycle, peripherals, and leakage. Firmware must also avoid unnecessary peripheral operation to preserve the energy available between measurement cycles.
Consumer Accessories and Embedded Controls
The STM8S903F3U6TR fits cost-sensitive consumer accessories that need local logic, analog measurement, and flexible serial connectivity. A typical role includes controlling indicators, reading a potentiometer or light sensor, storing configuration, and relaying commands to another device. The 16 I/O ports provide enough interface capacity for compact keypad, display, or actuator arrangements, while the 10-bit ADC handles basic measurement tasks. Its 3 mm by 3 mm package supports highly integrated boards, and the 5.5 V upper limit permits use in 5 V systems when the attached peripherals support the same rail. Production validation should include power-consumption, startup, and peripheral timing checks against the exact application.
Datos de referencia de ingeniería para STM8S903F3U6TR — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | STM8S903F3U3TR |
|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics |
| Package | 20-pin UFQFPN (3x3) | 20-pin UFQFPN (3x3) - same package class |
| Maximum Clock Speed | 16 MHz | 16 MHz |
| Flash Program Memory | 8 KB | 8 KB |
| RAM | 1 KB | 1 KB |
| Integrated EEPROM | 640 bytes | 640 bytes |
| ADC Resolution | 10 bits | 10 bits |
| Serial Interfaces | UART, SPI, and I²C | UART, SPI, and I²C |
| I/O Port Count | 16 ports | 16 ports |
| Timer Count | 2 timers | 2 timers |
Diferenciadores clave
- Exact approved ordering code (frente a STM8S903F3U3TR)
- Compact integrated feature set (frente a STM8S903F3U3TR)
- Mixed analog and serial connectivity (frente a STM8S903F3U3TR)
Notas de diseño
Treat the UFQFPN exposed pad as a thermal and electrical connection rather than an unused mechanical feature. Follow the manufacturer land-pattern and exposed-pad recommendations in the STM8S903F3 datasheet, connect the pad to the intended ground plane, and provide uninterrupted copper where practical. Because the package is only 3 mm by 3 mm, local heat spreading and the board's copper area can materially influence junction temperature under sustained 16 MHz operation.
Place the required supply-decoupling capacitor adjacent to the device's supply pin, and route high-current or switching-supply return paths away from the MCU ground reference. Confirm the official 20-pin UFQFPN footprint dimensions, exposed-pad geometry, pin-one orientation, and solder mask clearance before releasing artwork. Do not infer these mechanical details solely from a generic 20-pin QFN footprint.
Do not assume that a suffix change is electrically or qualification-neutral. Although STM8S903F3U3TR is the closest same-family drop-in candidate, its temperature-grade and qualification characteristics must be checked against the exact STM8S903F3U6TR ordering code. Also validate the clock source, startup behavior, peripheral mapping, and firmware configuration before releasing a substitution into production.
Design the supply for the full 2.95 V to 5.5 V operating range and account for startup current, peripheral loading, and the 16 MHz operating state. Use the manufacturer datasheet for actual current-consumption figures and supported low-power modes. If a switching regulator supplies the rail, verify its ripple and startup sequence against the MCU and any attached communication peripherals rather than relying only on nominal voltage.
Información de cumplimiento
RoHS compliance is identified in the part specification. REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status are unknown.