SY89529LZC - 200MHz Spread-Spectrum Clock | Microchip
N.º de pieza: SY89529LZC ✓ ActivoSY89529LZC Descripción general
A spread-spectrum clock synthesizer is a clock-generation IC that intentionally varies clock timing over a controlled range to spread switching energy across a wider frequency band. This technique reduces the peak spectral concentration associated with a fixed-frequency clock. In the system hierarchy, the SY89529LZC belongs to the clock and timing IC family, combining a phase-locked loop with precision frequency generation and spread-spectrum modulation.
Key features include low-voltage 3.3 V operation, operation up to 200 MHz, and generation of a precision LVPECL output from a low-cost 16.66 MHz crystal. The spread-spectrum modulation control supports up to 0.5% modulation. According to the device feature description, this modulation can reduce EMI by 7 dB, making the device useful in systems where reducing narrowband clock harmonics is important.
The architecture uses a PLL-based frequency synthesizer with one clock output. The crystal input establishes the stable reference from which the internal PLL produces the higher-frequency clock. An LVPECL output is suited to high-speed digital links when the receiving equipment supports ECL-compatible levels and proper termination. The LVTTL and LVCMOS-compatible feature broadens its usefulness across clock-distribution and digital-interface environments.
Typical uses include communication equipment, data-processing systems, networking infrastructure, test and measurement instruments, and industrial electronics. In these systems, the device can provide a common local clock while reducing the peak spectral energy that a fixed-frequency oscillator would produce. The 28-pin SOIC format also supports conventional surface-mount PCB assembly.
Designers should use the manufacturer’s pin-description table when assigning PCB nets and verify the crystal-load capacitance, termination, output impedance, and decoupling requirements. LVPECL outputs generally require correct source termination and compatible receiver thresholds; incorrect termination can create reflections, distorted edges, or excessive current. The spread-spectrum percentage should also be selected with system timing margins and downstream clock-domain requirements in mind.
This page combines the device’s published clocking characteristics with procurement guidance, comparison fields, pin-package considerations, and practical design notes. It also distinguishes documented functions from parameters that must be confirmed in the manufacturer datasheet before a new PCB layout is released.
Alternativas directas para SY89529LZC — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
No hay alternativas directas disponibles para este producto.
Solicitar alternativasSY89529LZC Especificaciones
| Product Type | Spread-spectrum clock synthesizer |
| Tensión de alimentación | 3.3 V |
| Maximum Output Frequency | 200 MHz |
| Reference Input | 16.66 MHz crystal |
| Clock Output Type | LVPECL |
| PLL | Yes |
| Number of Clock Circuits | 1 |
| Maximum Spread-Spectrum Modulation | 0.5% |
| EMI Reduction | 7 dB with spread-spectrum modulation |
| Logic Compatibility | LVTTL and LVCMOS compatible |
| Encapsulado | 28-pin SOIC |
| Tipo de montaje | Surface mount |
Guía de configuración de pines de SY89529LZC 28-pin soic
Configuración de pines para SY89529LZC (encapsulado 28-pin soic). La numeración de pines, las funciones y los diagramas de conexión se definen en la hoja de datos del fabricante. Consúltela para conocer el footprint exacto y las directrices de soldadura.
No hay datos detallados de patillaje disponibles para SY89529LZC.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
SY89529LZC es adecuado para 6 aplicacións: Network Equipment Clock Distribution, Data Processing System Timing, Test and Measurement Instrumentation, Industrial Control Electronics, Communications Module Clocking, EMI-Controlled Digital Systems.
Network Equipment Clock Distribution
The SY89529LZC is suitable for distributing a common clock within network equipment that benefits from reduced narrowband electromagnetic interference. Its PLL-based architecture generates up to 200 MHz from a 16.66 MHz crystal, while spread-spectrum modulation of up to 0.5% spreads clock energy across a wider band. The stated 7 dB EMI reduction can simplify filtering or shorten enclosure-related emissions work. Designers must verify that the modulation percentage remains within the timing budget of every clock-domain crossing and confirm that the receiver supports LVPECL levels.
Recomendado
Data Processing System Timing
The SY89529LZC can provide a local high-frequency clock for data-processing boards where predictable board-level timing and controlled EMI are important. A 16.66 MHz crystal supplies the reference, and the PLL produces an LVPECL clock up to 200 MHz. Spread-spectrum operation can lower the peak spectral component seen by adjacent circuitry, although the resulting instantaneous frequency variation must be included in interface and margin analysis. Differential clock routing, a continuous return path, and correct source termination are necessary for reliable operation.
Recomendado
Test and Measurement Instrumentation
The SY89529LZC fits instrumentation that requires a local 200 MHz-class clock source and may benefit from spread-spectrum energy distribution. Its 3.3 V operating supply supports integration into compact mixed-signal and digital systems, while the LVPECL output offers a suitable interface for compatible high-speed logic. The spread-spectrum control should be adjusted according to the instrument’s timing requirements. Before schematic capture, obtain the manufacturer’s recommended crystal, termination, decoupling, and output-amplitude values from the datasheet.
Recomendado
Industrial Control Electronics
The SY89529LZC can be used in industrial control electronics to create a local clock for high-speed processing, sampling, or communications blocks while reducing peak EMI emissions. Its single PLL output is driven from a 16.66 MHz crystal and reaches up to 200 MHz, allowing one device to serve multiple compatible clock-domain components when fanout is appropriate. Industrial designs must verify the operating-temperature limits and long-term clock stability requirements. LVPECL receivers need suitable thresholds and termination, so the interface should not be treated as a direct LVCMOS replacement.
Recomendado
Communications Module Clocking
The SY89529LZC is appropriate for a communications module that needs a compact, high-frequency clock with controlled spectral spreading. It generates an LVPECL output up to 200 MHz from a 16.66 MHz crystal and can reduce EMI by a stated 7 dB when spread-spectrum modulation is enabled. That behavior is useful where minimizing narrowband emissions is more important than maintaining an entirely fixed clock period. Verify output jitter, phase noise, modulation limits, and receiver compatibility from the manufacturer documentation before production release.
Recomendado
EMI-Controlled Digital Systems
The SY89529LZC can serve digital systems where clock harmonics create coupling or enclosure compliance problems. By modulating the clock timing over up to 0.5%, it spreads energy across a broader frequency range and provides a stated 7 dB EMI reduction. The part still delivers a maximum 200 MHz LVPECL clock from a 16.66 MHz crystal. The design must account for the resulting timing variation, preserve a continuous reference plane beneath the differential clock route, and use the manufacturer-prescribed output termination for clean signal integrity.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para SY89529LZC — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto |
|---|---|
| Brand | Microchip Technology |
| Package | 28-pin SOIC |
| Product Type | Spread-spectrum clock synthesizer |
| Supply Voltage | 3.3 V |
| Maximum Output Frequency | 200 MHz |
| Reference Input | 16.66 MHz crystal |
| Output Type | LVPECL |
| Number of Clock Circuits | 1 |
| Maximum Spread-Spectrum Modulation | 0.5% |
| EMI Reduction | 7 dB |
Notas de diseño
Route the LVPECL clock as a controlled differential pair over a continuous reference plane, with minimal stubs and symmetrical geometry. Keep the clock output and sensitive timing paths away from switching power inductors and high-current return paths. The available information confirms the LVPECL output but does not state the complete pin arrangement, so use the manufacturer’s package drawing and pin table before assigning physical pins.
Apply the termination arrangement specified by the manufacturer for the LVPECL interface. Differential source termination affects edge rate, current consumption, reflection, and downstream noise, so do not substitute a single-ended termination configuration without signal-integrity analysis. Confirm the receiver’s voltage thresholds and clock-input capacitance, and maintain compatible impedance across the complete source-to-load path.
Do not assume that the 0.5% spread-spectrum capability can be used without checking system timing margins. The modulation changes instantaneous clock frequency, so cycle-to-cycle jitter and downstream clock-domain tolerance must be evaluated. Also select the 16.66 MHz crystal using the manufacturer’s required load capacitance, tolerance, stability, and drive-level specifications rather than choosing it from nominal frequency alone.
Información de cumplimiento
No definitive environmental or material-compliance declarations were present in the available product information. AEC-Q100 status is not applicable to this clock synthesizer.