Microchip Technology

SY89834UMI - 1GHz 2:4 LVCMOS-to-LVPECL Buffer | Microchip

N.º de pieza: SY89834UMI ✓ Activo
2.5 V and 3.3 V Vdss 16-VFQFN exposed pad, 16-MLF, 3 mm by 3 mm Package 1 GHz Speed
MOQ: 1 |

SY89834UMI Descripción general

The Microchip Technology SY89834UMI is a 1 GHz clock fanout buffer and translator with a 2:1 input multiplexer, accepting two LVTTL or LVCMOS inputs and providing four differential LVPECL outputs in a 16-VFQFN exposed-pad package. It combines two-input clock selection with one-input-to-four-output distribution in a 3 mm by 3 mm surface-mount device designed for high-speed, low-skew clock networks.

A clock buffer is a digital timing device that reproduces and distributes clock signals while adding little distortion to their amplitude, duty cycle, or edge relationship. Clock translators perform the additional function of converting between incompatible voltage-based logic families. The SY89834UMI belongs to the clock-and-timing IC hierarchy, where multiplexers, fanout buffers, translators, and clock-data recovery circuits support reliable operation in processors, network equipment, test systems, and communications infrastructure.

The principal features of the SY89834UMI include two selectable single-ended LVTTL or LVCMOS inputs, 2.5 V or 3.3 V supply operation, four differential LVPECL outputs, and operation up to 1 GHz. Differential LVPECL output signaling supports high-speed backplanes and clock trees by improving noise immunity through common-mode rejection and reducing sensitivity to single-ended disturbances. The integrated 2:1 multiplexer allows two clock sources to share one output fanout network.

Inside the device, the selected input passes through level translation before distribution to the four differential output pairs. This arrangement separates source selection from output distribution, allowing a design to change clock sources without changing the downstream physical topology. The eight LVPECL outputs provide four differential channels, each with complementary true and inverted signals. The 16-VFQFN exposed-pad package supports compact placement and provides a thermal pad for improved heat transfer on multilayer printed circuit boards.

Typical uses include high-speed backplane clock distribution, telecommunications line cards, network switches, server clock trees, instrumentation, and FPGA or ASIC clocking systems. It is particularly relevant when two potential clocks must be selected before being distributed to multiple high-speed loads. Differential routing and controlled termination remain important at 1 GHz, so trace geometry and return paths should be evaluated as part of the complete clock architecture.

Designers should use the manufacturer pin-description table when assigning PCB tracks, connect the exposed pad to the appropriate ground plane, and provide the required input and output decoupling. LVPECL interfaces require suitable bias and termination networks; they should not be treated as conventional CMOS outputs. Trace length, pair symmetry, and reference-plane continuity are critical to preserve signal integrity at the device's maximum operating frequency.

This product page organizes the SY89834UMI clock architecture, verified package and operating characteristics, application guidance, drop-in candidates, and PCB-focused engineering considerations. It supports faster component evaluation while keeping pin assignment, high-speed layout, and supply-network decisions tied to the manufacturer documentation.

Alternativas directas para SY89834UMI — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

SY89834UMI-TR

✅ Sustitución directa
📦 16-VFQFN Exposed Pad (16-MLF)
Same 1 GHz 2:4 LVTTL/CMOS-to-LVPECL function and 16-pin QFN exposed-pad package; ordering suffix differs by 0% in stated operating frequency

📋 Alternativa de referencia (no en el catálogo)

SY89834UMG-TR

✅ Sustitución directa
📦 16-VFQFN Exposed Pad (16-MLF)
Same 1 GHz 2:4 LVTTL/CMOS-to-LVPECL function and 16-pin QFN exposed-pad package; ordering suffix differs by 0% in stated operating frequency

📋 Alternativa de referencia (no en el catálogo)

SY89834UMG

✅ Sustitución directa
📦 16-VFQFN Exposed Pad (16-MLF)
Same 1 GHz 2:4 LVTTL/CMOS-to-LVPECL function and 16-pin QFN exposed-pad package; ordering suffix differs by 0% in stated operating frequency

📋 Alternativa de referencia (no en el catálogo)

SY89832UMG-TR

✅ Sustitución directa
📦 16-VFQFN Exposed Pad (16-MLF)
Same 16-pin QFN exposed-pad mechanical package and related clock-buffer family, but the stated operating-frequency difference is 0%; functional parity requires pin-level confirmation

📋 Alternativa de referencia (no en el catálogo)

SY89834UMI Especificaciones

Product Type Clock fanout buffer, multiplexer, and logic translator
Frecuencia de reloj máxima 1 GHz
Input Channels 2 channels
Input Multiplexer Ratio 2:1
Output Fanout Ratio 1:4
Input Logic LVTTL and LVCMOS
Output Logic Differential LVPECL
Supply Voltage Options 2.5 V and 3.3 V
Number of Circuits 1
Tipo de montaje Surface-mount technology
Encapsulado 16-VFQFN exposed pad, 16-MLF, 3 mm by 3 mm
Rango de temperatura de funcionamiento -40 °C to 85 °C
Configuración de salida 4 differential output pairs

Guía de configuración de pines de SY89834UMI 16-vfqfn exposed pad, 16-mlf, 3 mm by 3 mm

Configuración de pines para SY89834UMI (encapsulado 16-vfqfn exposed pad, 16-mlf, 3 mm by 3 mm). La numeración de pines, las funciones y los diagramas de conexión se definen en la hoja de datos del fabricante. Consúltela para conocer el footprint exacto y las directrices de soldadura.

Diagrama de patillaje del encapsulado 16-vfqfn exposed pad, 16-mlf, 3 mm by 3 mm para SY89834UMI

No hay datos detallados de patillaje disponibles para SY89834UMI.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

SY89834UMI es adecuado para 6 aplicacións: High-Speed Backplane Clock Distribution, Telecommunications Line-Card Clocking, FPGA and ASIC Clock Trees, Network Switch Clock Distribution, Server and Storage Clock Networks, High-Speed Test and Measurement Equipment.

🌐

High-Speed Backplane Clock Distribution

The SY89834UMI fits backplane clock distribution because it accepts two LVTTL or LVCMOS clock sources, selects one through its 2:1 multiplexer, and distributes that clock through four differential LVPECL output pairs. The 1 GHz operating limit provides bandwidth for high-speed communications boards where receiver clock margins are limited. Place the device near the clock-source selection point and maintain continuous reference planes beneath every differential pair. Its 16-VFQFN exposed-pad package also keeps routing short, although thermal-pad grounding and LVPECL biasing must follow the manufacturer recommendations.

🌐

Telecommunications Line-Card Clocking

Telecommunications line cards benefit from the SY89834UMI's combination of source multiplexing and differential fanout in a compact package. Two compatible LVTTL or LVCMOS clocks can be presented to the device, with the selected source translated and distributed to four LVPECL channels at frequencies up to 1 GHz. This arrangement reduces the number of separate clock trees and provides a controlled distribution point near high-speed fabric. The 3 mm by 3 mm 16-VFQFN exposed-pad construction supports compact line-card layouts, provided the PCB provides an uninterrupted ground reference and the prescribed output termination.

🖥️

FPGA and ASIC Clock Trees

The SY89834UMI is appropriate for FPGA and ASIC clock trees that require two candidate clocks and several fanout destinations. Its 2:1 input multiplexer selects the source clock, while four differential LVPECL output pairs distribute the translated signal to demanding logic loads. The 1 GHz capability supports high-performance fabric and serial-interface clocking, while differential signaling improves margin against common-mode noise. Designers should match clock and data groups, preserve pair symmetry, and confirm receiver and termination requirements because LVPECL interfaces do not use the same biasing convention as ordinary CMOS.

🌐

Network Switch Clock Distribution

The SY89834UMI can support a network-switch clock distribution point by accepting two local reference clocks and driving four differential LVPECL clock outputs. Source selection is useful for failover or operating-mode changes, while the one-to-four fanout supports several downstream circuits without duplicating translation stages. Operation up to 1 GHz makes the device suitable for high-speed switching fabrics when edge quality is maintained through controlled routing. The compact 16-VFQFN package permits placement near the switch interface, and the exposed thermal pad should be connected according to the manufacturer package guidance.

🖥️

Server and Storage Clock Networks

Server and storage systems can use the SY89834UMI where two local clock candidates must feed several high-speed destinations. The 2:1 input mux reduces distribution complexity, and the four differential LVPECL outputs provide short, low-skew paths to compatible receivers. A 1 GHz clock ceiling supports demanding processor-adjacent and fabric clock networks, subject to the complete system's timing budget. The 3 mm by 3 mm package helps preserve routing distance, but layer transitions, reference-plane discontinuities, and connector or package parasitics must be controlled to maintain usable timing margin at the highest frequency.

🔧

High-Speed Test and Measurement Equipment

The SY89834UMI is useful in high-speed test equipment when a selectable reference clock must be translated and distributed across several acquisition or source channels. Two LVTTL or LVCMOS inputs provide clock-source flexibility, while four differential LVPECL outputs offer repeatable distribution to compatible timing circuits. The 1 GHz limit covers demanding instrumentation while retaining a compact 16-VFQFN footprint. Because measurement accuracy can be affected by clock jitter, skew, and reflection, the design should use symmetric routing, suitable terminations, and characterized test points rather than relying only on nominal clock frequency.

What is the SY89834UMI?
The SY89834UMI is a 1 GHz clock fanout buffer and translator with a 2:1 input multiplexer. It accepts two single-ended LVTTL or LVCMOS inputs, selects one source, and drives four differential LVPECL output pairs. According to the manufacturer datasheet, the device combines source multiplexing, level translation, and 1:4 clock distribution in a 16-VFQFN exposed-pad package.
What are the key specifications of SY89834UMI that engineers should know?
The SY89834UMI supports clock operation up to 1 GHz with two LVTTL or LVCMOS inputs, a 2:1 input multiplexer, and four differential LVPECL output channels. Its 2.5 V or 3.3 V supply options and -40 °C to 85 °C operating range support industrial and commercial equipment. According to the manufacturer datasheet, the 16-VFQFN exposed-pad package measures 3 mm by 3 mm and is intended for surface-mount assembly.
What is the maximum operating frequency of SY89834UMI?
The SY89834UMI operates at clock frequencies up to 1 GHz. This bandwidth supports high-speed backplanes, network-clock systems, FPGA clock distribution, and test equipment. According to the manufacturer datasheet, the device uses LVTTL or LVCMOS inputs and differential LVPECL outputs, so the complete interface path must preserve edge quality and differential-pair symmetry at the specified 1 GHz operating limit.
What logic levels does SY89834UMI use?
The SY89834UMI accepts LVTTL or LVCMOS input signals and produces differential LVPECL outputs. According to the manufacturer datasheet, the logic translator can operate from a 2.5 V or 3.3 V supply. The LVPECL interface is not directly equivalent to a conventional CMOS output, so the schematic must include the termination and bias arrangement specified for the application.
Where can I download the SY89834UMI datasheet PDF?
The SY89834UMI datasheet PDF is available from the manufacturer-document link on this product page and from the indexed Microchip document repository. The document covers the 2.5 V or 3.3 V operation, two-input selection, four differential LVPECL outputs, package information, and application requirements. Use the pin-description and recommended-application circuits when assigning connections and termination networks.
Where can I find the SY89834UMI pinout?
The SY89834UMI pin assignment is shown in the manufacturer datasheet's pin-description table and package drawing. The device uses a 16-VFQFN exposed-pad package, and the exposed pad requires the connection specified in the documentation. Use that table when assigning power, grounds, input selection controls, and the four differential LVPECL output pairs.
Is SY89834UMI suitable for high-speed backplane clock distribution?
The SY89834UMI is suitable for high-speed backplane clock distribution when the board can preserve LVPECL signal integrity. Its 1 GHz maximum operating frequency, selectable LVTTL or LVCMOS inputs, and four differential output channels suit central clock distribution. According to the manufacturer datasheet, the device targets ultra-low-skew applications, making controlled pair routing and proper LVPECL termination essential.
What can replace the SY89834UMI?
The closest documented replacement candidates are the SY89834UMI-TR and SY89834UMG-TR variants in the same 16-pin QFN exposed-pad family. The SY89832UMG-TR is another related candidate, but its exact functional and timing equivalence should be confirmed against the manufacturer documentation. Verify pin names, supply voltage, input selection behavior, output termination, and timing specifications before treating any candidate as a drop-in replacement.
Is SY89834UMI the same as SY89834UMI-TR?
The SY89834UMI-TR is a related orderable version of the SY89834UMI device in the same 16-VFQFN exposed-pad family, with the suffix generally identifying the packaging or delivery format. Because the exact ordering-code details are not established on this page, confirm the manufacturer pinout, temperature rating, and tape-and-reel orientation before substitution. The functional clock and translator specifications must also match the original design requirement.
When should I choose SY89834UMI over SY89834UMG-TR?
Choose the SY89834UMI when its documented orderable configuration matches the production BOM, while using SY89834UMG-TR only after confirming that both devices use the same 16-pin exposed-pad land pattern, clock-input arrangement, control logic, and LVPECL output mapping. The related comparison data identifies package and terminal consistency, but production substitution should still include a timing, power, and orientation review.
Is SY89834UMI suitable for FPGA or ASIC clocking?
The SY89834UMI is suitable for FPGA or ASIC clocking when the target requires two selectable sources and low-skew distribution to several high-speed destinations. The device accepts two LVTTL or LVCMOS inputs and provides four differential LVPECL output pairs at up to 1 GHz. According to the manufacturer datasheet, the 3 mm by 3 mm exposed-pad package also supports compact placement near high-speed logic.
What is the difference between SY89834UMI and SY89832UMG-TR?
The documented comparison identifies the SY89832UMG-TR as a related replacement candidate, but it does not establish complete equivalence to the SY89834UMI. The SY89834UMI specifically combines two single-ended inputs, a 2:1 multiplexer, translation to LVPECL, and four differential output pairs. Confirm output count, input logic, control pins, skew, jitter, and package mapping against the manufacturer datasheet before using it as a drop-in substitute.
What is the best Microchip equivalent for SY89834UMI?
The best Microchip-family equivalent depends on whether the original orderable suffix, delivery format, or electrical function must be preserved. The SY89834UMI-TR and SY89834UMG-TR are the closest documented related parts in the 16-pin QFN exposed-pad family. Review their ordering codes and manufacturer documentation to confirm that the input mux, differential outputs, supply range, and timing behavior match the target board.
How should LVPECL outputs be terminated on a SY89834UMI board?
Terminate the SY89834UMI LVPECL outputs using the network specified by the manufacturer for the board's interface and topology. Differential LVPECL normally requires controlled biasing and termination rather than an ordinary CMOS pull-down arrangement. According to the manufacturer datasheet, the output is differential LVPECL, so each true and inverted pair should be routed consistently and terminated where the clock architecture requires it.
Where can I request a quote for SY89834UMI?
Use the Request a Quote form on this page to request current SY89834UMI pricing, stock confirmation, lead time, and order details. The form is the appropriate channel for commercial quantities and production scheduling. For technical qualification, provide the required clock frequency, input logic, LVPECL output configuration, package suffix, and operating-temperature requirement with the request.
What is the lead time for SY89834UMI?
The current production lead time for SY89834UMI should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, date code, package suffix, and supply status, so engineers should reserve procurement time before committing the component to a production schedule. The form should be submitted with the required quantity and target delivery date.
Is SY89834UMI in stock?
Current SY89834UMI stock status should be confirmed through the Request a Quote form on this page. Inventory can change with market activity, quantity, and package configuration, so a procurement response is more useful than a static listing status. Include the required order quantity, target price, and date-code preference when requesting current availability.
What is the price of SY89834UMI?
Use the Request a Quote form on this page to request the current SY89834UMI price for your required quantity and package suffix. The form supports quantity-specific commercial review without embedding a potentially stale price in technical content. Include the target shipment location, desired delivery date, and whether unopened, traceable stock is required for your production process.

Datos de referencia de ingeniería para SY89834UMI — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose the SY89834UMI for a high-speed design that needs two selectable LVTTL or LVCMOS clock sources, translation to LVPECL, and four differential outputs in a compact 16-VFQFN exposed-pad package. The SY89834UMI-TR and SY89834UMG-TR are the first choices when an equivalent ordering configuration is needed; their stated 1 GHz operation and package match the original, but production approval should include a check of the ordering suffix and tape orientation. The SY89834UMG is another related same-family configuration. Consider the SY89832UMG-TR only after reviewing its pin mapping, output count, input logic, and timing characteristics because the available comparison does not establish complete electrical equivalence. For any substitution, verify the exposed-pad connection, supply range, input-select polarity, LVPECL bias network, termination, and operating-temperature requirements against the manufacturer datasheet.

Comparación con alternativas

Parámetro Este producto SY89834UMI-TR SY89834UMG-TR SY89834UMG SY89832UMG-TR
Package 16-VFQFN Exposed Pad (16-MLF), 3 mm by 3 mm 16-VFQFN Exposed Pad (16-MLF) - same 16-VFQFN Exposed Pad (16-MLF) - same 16-VFQFN Exposed Pad (16-MLF) - same 16-VFQFN Exposed Pad (16-MLF) - same
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Mounting Type Surface-mount technology Surface-mount technology Surface-mount technology Surface-mount technology Surface-mount technology

Diferenciadores clave

  • Combines clock multiplexing, translation, and fanout (frente a SY89832UMG-TR)
  • Direct ordering-code alternative in the same package (frente a SY89834UMG-TR)
  • Four-channel differential distribution (frente a SY89834UMI-TR)

Notas de diseño

Treat every LVPECL output as a controlled-impedance differential pair. Route true and inverted signals with consistent geometry and spacing, preserve a continuous reference plane, and minimize stubs and layer transitions. At the SY89834UMI's 1 GHz upper operating limit, pair-length imbalance and discontinuities can degrade edge quality and timing margin even when the nominal clock frequency is correct. Validate the complete escape route, vias, connectors, and receiver termination with a representative board.

Apply the manufacturer-recommended bypass network directly to the supply and ground pins, with the shortest possible loop between each capacitor and the device. The exposed pad should be tied to the specified ground plane rather than treated as an unused mechanical feature. Because LVPECL output biasing depends on the interface arrangement, use the datasheet reference circuit for supply voltage, termination, and output pull-down values instead of copying values from an unrelated ECL design.

Place the SY89834UMI close to the clock-source selection point and minimize the distance to the first differential destination. Keep unrelated noisy or high-speed switching routes away from input and output pairs, and avoid sharing narrow reference-plane necks beneath the differential fanout. Use the manufacturer pin-description table to confirm the input-select controls and exposed-pad connection before routing. The 3 mm by 3 mm package supports compact placement, but placement alone does not compensate for poor return-path continuity.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The clock-buffer and translator function is not an automotive qualification category. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the current manufacturer product documentation.

Búsquedas relacionadas

SY89834UMI datasheet SY89834UMI pinout SY89834UMI datasheet pdf SY89834UMI equivalent SY89834UMI replacement SY89834UMI vs SY89832UMG-TR SY89834UMI footprint SY89834UMI application circuit SY89834UMI price SY89834UMI stock Microchip SY89834UMI SY89834UMI 1GHz LVPECL

Componentes & términos relacionados

Microchip Technology SY89834UMI SY89834UMI-TR SY89834UMG SY89834UMG-TR SY89832UMG-TR SY89872UMG SY89831UMG clock fanout buffer clock translator 2:1 input multiplexer 1:4 fanout LVTTL LVCMOS LVPECL differential signaling clock distribution clock tree high-speed backplane FPGA clocking ASIC clocking telemetry control and status signal surface-mount technology 16-VFQFN exposed-pad package
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ