SY89834UMI - 1GHz 2:4 LVCMOS-to-LVPECL Buffer | Microchip
MPN: SY89834UMI ✓ فعالSY89834UMI نمای کلی
A clock buffer is a digital timing device that reproduces and distributes clock signals while adding little distortion to their amplitude, duty cycle, or edge relationship. Clock translators perform the additional function of converting between incompatible voltage-based logic families. The SY89834UMI belongs to the clock-and-timing IC hierarchy, where multiplexers, fanout buffers, translators, and clock-data recovery circuits support reliable operation in processors, network equipment, test systems, and communications infrastructure.
The principal features of the SY89834UMI include two selectable single-ended LVTTL or LVCMOS inputs, 2.5 V or 3.3 V supply operation, four differential LVPECL outputs, and operation up to 1 GHz. Differential LVPECL output signaling supports high-speed backplanes and clock trees by improving noise immunity through common-mode rejection and reducing sensitivity to single-ended disturbances. The integrated 2:1 multiplexer allows two clock sources to share one output fanout network.
Inside the device, the selected input passes through level translation before distribution to the four differential output pairs. This arrangement separates source selection from output distribution, allowing a design to change clock sources without changing the downstream physical topology. The eight LVPECL outputs provide four differential channels, each with complementary true and inverted signals. The 16-VFQFN exposed-pad package supports compact placement and provides a thermal pad for improved heat transfer on multilayer printed circuit boards.
Typical uses include high-speed backplane clock distribution, telecommunications line cards, network switches, server clock trees, instrumentation, and FPGA or ASIC clocking systems. It is particularly relevant when two potential clocks must be selected before being distributed to multiple high-speed loads. Differential routing and controlled termination remain important at 1 GHz, so trace geometry and return paths should be evaluated as part of the complete clock architecture.
Designers should use the manufacturer pin-description table when assigning PCB tracks, connect the exposed pad to the appropriate ground plane, and provide the required input and output decoupling. LVPECL interfaces require suitable bias and termination networks; they should not be treated as conventional CMOS outputs. Trace length, pair symmetry, and reference-plane continuity are critical to preserve signal integrity at the device's maximum operating frequency.
This product page organizes the SY89834UMI clock architecture, verified package and operating characteristics, application guidance, drop-in candidates, and PCB-focused engineering considerations. It supports faster component evaluation while keeping pin assignment, high-speed layout, and supply-network decisions tied to the manufacturer documentation.
جایگزینهای drop-in برای SY89834UMI — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
SY89834UMI-TR
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
SY89834UMG-TR
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
SY89834UMG
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
SY89832UMG-TR
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
SY89834UMI مشخصات
| Product Type | Clock fanout buffer, multiplexer, and logic translator |
| حداکثر فرکانس کلاک | 1 GHz |
| Input Channels | 2 channels |
| Input Multiplexer Ratio | 2:1 |
| Output Fanout Ratio | 1:4 |
| Input Logic | LVTTL and LVCMOS |
| Output Logic | Differential LVPECL |
| Supply Voltage Options | 2.5 V and 3.3 V |
| Number of Circuits | 1 |
| نوع نصب | Surface-mount technology |
| بستهبندی | 16-VFQFN exposed pad, 16-MLF, 3 mm by 3 mm |
| محدوده دمای کاری | -40 °C to 85 °C |
| پیکربندی خروجی | 4 differential output pairs |
راهنمای پیکربندی پین SY89834UMI 16-vfqfn exposed pad, 16-mlf, 3 mm by 3 mm
پیکربندی پین برای SY89834UMI (پکیج 16-vfqfn exposed pad, 16-mlf, 3 mm by 3 mm). شمارهگذاری پایهها، عملکردها و نمودارهای اتصال در دیتاشیت سازنده تعریف شده است. برای footprint دقیق و دستورالعملهای لحیمکاری به آن مراجعه کنید.
داده پینآوت تفصیلی موجود نیست برای SY89834UMI.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
SY89834UMI مناسب است برای 6 کاربردs: High-Speed Backplane Clock Distribution, Telecommunications Line-Card Clocking, FPGA and ASIC Clock Trees, Network Switch Clock Distribution, Server and Storage Clock Networks, High-Speed Test and Measurement Equipment.
High-Speed Backplane Clock Distribution
The SY89834UMI fits backplane clock distribution because it accepts two LVTTL or LVCMOS clock sources, selects one through its 2:1 multiplexer, and distributes that clock through four differential LVPECL output pairs. The 1 GHz operating limit provides bandwidth for high-speed communications boards where receiver clock margins are limited. Place the device near the clock-source selection point and maintain continuous reference planes beneath every differential pair. Its 16-VFQFN exposed-pad package also keeps routing short, although thermal-pad grounding and LVPECL biasing must follow the manufacturer recommendations.
پیشنهادی
Telecommunications Line-Card Clocking
Telecommunications line cards benefit from the SY89834UMI's combination of source multiplexing and differential fanout in a compact package. Two compatible LVTTL or LVCMOS clocks can be presented to the device, with the selected source translated and distributed to four LVPECL channels at frequencies up to 1 GHz. This arrangement reduces the number of separate clock trees and provides a controlled distribution point near high-speed fabric. The 3 mm by 3 mm 16-VFQFN exposed-pad construction supports compact line-card layouts, provided the PCB provides an uninterrupted ground reference and the prescribed output termination.
پیشنهادی
FPGA and ASIC Clock Trees
The SY89834UMI is appropriate for FPGA and ASIC clock trees that require two candidate clocks and several fanout destinations. Its 2:1 input multiplexer selects the source clock, while four differential LVPECL output pairs distribute the translated signal to demanding logic loads. The 1 GHz capability supports high-performance fabric and serial-interface clocking, while differential signaling improves margin against common-mode noise. Designers should match clock and data groups, preserve pair symmetry, and confirm receiver and termination requirements because LVPECL interfaces do not use the same biasing convention as ordinary CMOS.
پیشنهادی
Network Switch Clock Distribution
The SY89834UMI can support a network-switch clock distribution point by accepting two local reference clocks and driving four differential LVPECL clock outputs. Source selection is useful for failover or operating-mode changes, while the one-to-four fanout supports several downstream circuits without duplicating translation stages. Operation up to 1 GHz makes the device suitable for high-speed switching fabrics when edge quality is maintained through controlled routing. The compact 16-VFQFN package permits placement near the switch interface, and the exposed thermal pad should be connected according to the manufacturer package guidance.
پیشنهادی
Server and Storage Clock Networks
Server and storage systems can use the SY89834UMI where two local clock candidates must feed several high-speed destinations. The 2:1 input mux reduces distribution complexity, and the four differential LVPECL outputs provide short, low-skew paths to compatible receivers. A 1 GHz clock ceiling supports demanding processor-adjacent and fabric clock networks, subject to the complete system's timing budget. The 3 mm by 3 mm package helps preserve routing distance, but layer transitions, reference-plane discontinuities, and connector or package parasitics must be controlled to maintain usable timing margin at the highest frequency.
پیشنهادی
High-Speed Test and Measurement Equipment
The SY89834UMI is useful in high-speed test equipment when a selectable reference clock must be translated and distributed across several acquisition or source channels. Two LVTTL or LVCMOS inputs provide clock-source flexibility, while four differential LVPECL outputs offer repeatable distribution to compatible timing circuits. The 1 GHz limit covers demanding instrumentation while retaining a compact 16-VFQFN footprint. Because measurement accuracy can be affected by clock jitter, skew, and reflection, the design should use symmetric routing, suitable terminations, and characterized test points rather than relying only on nominal clock frequency.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای SY89834UMI — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | SY89834UMI-TR | SY89834UMG-TR | SY89834UMG | SY89832UMG-TR |
|---|---|---|---|---|---|
| Package | 16-VFQFN Exposed Pad (16-MLF), 3 mm by 3 mm | 16-VFQFN Exposed Pad (16-MLF) - same | 16-VFQFN Exposed Pad (16-MLF) - same | 16-VFQFN Exposed Pad (16-MLF) - same | 16-VFQFN Exposed Pad (16-MLF) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Mounting Type | Surface-mount technology | Surface-mount technology | Surface-mount technology | Surface-mount technology | Surface-mount technology |
تفاوتهای کلیدی
- Combines clock multiplexing, translation, and fanout (در مقابلSY89832UMG-TR)
- Direct ordering-code alternative in the same package (در مقابلSY89834UMG-TR)
- Four-channel differential distribution (در مقابلSY89834UMI-TR)
یادداشتهای طراحی
Treat every LVPECL output as a controlled-impedance differential pair. Route true and inverted signals with consistent geometry and spacing, preserve a continuous reference plane, and minimize stubs and layer transitions. At the SY89834UMI's 1 GHz upper operating limit, pair-length imbalance and discontinuities can degrade edge quality and timing margin even when the nominal clock frequency is correct. Validate the complete escape route, vias, connectors, and receiver termination with a representative board.
Apply the manufacturer-recommended bypass network directly to the supply and ground pins, with the shortest possible loop between each capacitor and the device. The exposed pad should be tied to the specified ground plane rather than treated as an unused mechanical feature. Because LVPECL output biasing depends on the interface arrangement, use the datasheet reference circuit for supply voltage, termination, and output pull-down values instead of copying values from an unrelated ECL design.
Place the SY89834UMI close to the clock-source selection point and minimize the distance to the first differential destination. Keep unrelated noisy or high-speed switching routes away from input and output pairs, and avoid sharing narrow reference-plane necks beneath the differential fanout. Use the manufacturer pin-description table to confirm the input-select controls and exposed-pad connection before routing. The 3 mm by 3 mm package supports compact placement, but placement alone does not compensate for poor return-path continuity.
اطلاعات انطباق
The clock-buffer and translator function is not an automotive qualification category. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the current manufacturer product documentation.