SY89872UMI - 2GHz 1:3 LVDS Clock Fanout Buffer | Microchip
N.º de pieza: SY89872UMI ✓ ActivoSY89872UMI Descripción general
A clock fanout buffer is a timing integrated circuit that distributes one input clock to multiple synchronized outputs. Clock buffers and drivers belong to the broader clock distribution and generation hierarchy, where they support high-speed communications, processors, converters, and test equipment. A divider can reduce the incoming clock frequency, while the fanout stage provides multiple copies of the resulting clock. Differential clocking helps preserve signal integrity when traces must travel between distant circuit blocks.
The SY89872UMI combines a 1:3 fanout ratio with a 2 GHz maximum frequency in one compact package. Its input receiver supports CML, HSTL, LVDS, and LVPECL signaling, allowing the device to work with several high-speed clock sources. LVDS is used at the outputs, and the 16-VFQFN package includes an exposed pad that provides a defined thermal-coupling path on the PCB. Internal termination is identified in the manufacturer documentation.
The SY89872U family combines programmable clock division with fanout buffering. Programmable division allows a system clock to be reduced when a downstream circuit cannot operate at the source rate. The 1:3 topology then distributes the selected clock to three destinations, reducing the number of separate buffer devices required on a board. Its differential interfaces support point-to-point links carrying complementary clock signals.
Typical applications include high-speed serial-interface clock distribution, communication equipment, data-converter clocking, FPGA or ASIC clock distribution, and instrumentation requiring multiple synchronized outputs. A three-output arrangement is particularly useful when related circuits require one common clock but are separated by PCB-routing distance. Differential LVDS outputs are useful where trace length, ground references, or nearby switching circuitry could degrade a single-ended clock.
PCB implementation should follow the manufacturer pinout and layout guidance, especially for the exposed pad, supply decoupling, differential input routing, and output termination. Keep the clock path short and symmetrical, provide a continuous ground reference, and place decoupling capacitance close to the supply pins. Confirm the programmed divide setting, supported input logic level, termination requirements, and output timing against the system clock specification before production release.
This product page organizes the principal device characteristics, application guidance, design considerations, and drop-in alternatives for engineering evaluation. It also distinguishes documented functions from parameters that require confirmation from the manufacturer datasheet before schematic release or qualification.
Alternativas directas para SY89872UMI — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con SY89872UMI (mismo factor de forma y huella) — difiere en Product Type.
SY89872UMG
✅ Sustitución directa ⚠️ Especificaciones sin verificarConsulte el precio
Ver hoja de datos →SY89872UMI Especificaciones
| Product Type | Clock fanout buffer and divider IC |
| Fanout Ratio | 1:3 |
| Maximum Frequency | 2 GHz |
| Tensión de alimentación | 2.5 V |
| Output Logic | LVDS |
| Input Logic | CML, HSTL, LVDS, or LVPECL |
| Número de salidas | 3 outputs |
| Number of Circuits | 1 circuit |
| Encapsulado | 16-VFQFN exposed pad, 16-MLF |
| Internal Termination | Yes |
| Programmable Divide | Programmable |
| Input Differential Signaling | Any differential input |
| Estado RoHS | unknown |
| REACH Status | unknown |
Guía de configuración de pines de SY89872UMI 16-vfqfn exposed pad, 16-mlf
Configuración de pines para SY89872UMI (encapsulado 16-vfqfn exposed pad, 16-mlf). La numeración de pines, las funciones y los diagramas de conexión se definen en la hoja de datos del fabricante. Consúltela para conocer el footprint exacto y las directrices de soldadura.
No hay datos detallados de patillaje disponibles para SY89872UMI.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
SY89872UMI es adecuado para 6 aplicacións: High-Speed Communication Clock Distribution, FPGA Clock Tree Design, ASIC Parallel and SerDes Clocking, Data Converter Clocking, Instrumentation and Test Equipment, Industrial Control and Robotics.
High-Speed Communication Clock Distribution
The SY89872UMI fits communication systems that require one high-speed differential clock to feed three related destinations. Its 1:3 fanout ratio reduces the number of separate buffer stages, while the 2 GHz maximum frequency supports demanding serial-link and data-conversion clock trees. CML, HSTL, LVDS, and LVPECL input acceptance allows the device to operate with multiple high-speed source conventions, and LVDS outputs provide a consistent destination format. Designers should verify input and output timing against the selected data rate, keep differential routes symmetrical, and confirm the programmed divide setting against each receiver's frequency limit.
FPGA Clock Tree Design
The SY89872UMI is useful in FPGA clock trees requiring three synchronized destinations from one differential source. A programmable divider can reduce the incoming clock, while the 1:3 fanout stage distributes the result to related FPGA clock inputs. Its 2 GHz capability is appropriate for high-performance logic fabrics and high-speed transceiver-related clocking, subject to the FPGA's documented input-frequency ceiling. The 2.5 V supply and LVDS outputs simplify current-interface planning, but engineers must confirm voltage compatibility, input standards, jitter requirements, and acquisition timing for the specific FPGA and clock source.
ASIC Parallel and SerDes Clocking
The SY89872UMI can divide and fan out a differential reference clock for an ASIC with multiple internal clock domains. Its 1:3 architecture is valuable when a source clock must reach three related blocks without duplicating complete buffer devices, and the 2 GHz rating supports high-speed internal reference distribution. LVDS outputs suit links carrying complementary clock signals across a controlled PCB environment. Before implementation, compare the device's input and output timing, jitter, output amplitude, and divide options against the ASIC clock specification. Route each differential pair as a coupled pair and confirm the exposed-pad grounding arrangement in the manufacturer layout guidance.
Data Converter Clocking
The SY89872UMI suits high-speed ADC and DAC clock systems that need multiple synchronized sampling or update clocks. The input receiver supports CML, HSTL, LVDS, and LVPECL, which allows it to follow several common converter-clock source formats, while its LVDS outputs provide three fanout destinations. The 2 GHz maximum frequency supports demanding conversion rates, but actual converter bandwidth, jitter sensitivity, and clock-input thresholds remain decisive. Use matched routing for each differential output, account for the programmed divider delay, and verify acquisition and hold timing at the converter pins before releasing the clock architecture.
Instrumentation and Test Equipment
The SY89872UMI is applicable to instrumentation requiring a precise differential reference clock divided and distributed across three measurement or processing sections. Its 1:3 topology can supply sampling, conversion, and processing blocks from one source, while the 2 GHz rating accommodates fast converters and counters. Differential LVDS signaling helps maintain clock integrity over longer controlled board routes compared with an exposed single-ended implementation. Engineers should account for input-to-output latency, divide-ratio-dependent timing, clock jitter, and receiver setup requirements. Short matched routing and a continuous ground plane remain important when the device operates beside high-current analog and switching sections.
Industrial Control and Robotics
The SY89872UMI can distribute a common differential clock among control, communication, and monitoring subsystems in an industrial or robotic controller. A single 1:3 fanout supports three clocked destinations without adding separate one-output buffers, while the programmable divider lets one high-frequency source serve slower downstream logic. The 2 GHz maximum frequency provides margin for high-rate digital interfaces, and LVDS outputs suit controlled backplane or PCB interconnects. Confirm industrial temperature requirements, electromagnetic-emissions constraints, grounding strategy, and timing tolerance for each subsystem. The exposed thermal pad should be connected to the PCB ground plane as directed by the manufacturer layout guidance.
Datos de referencia de ingeniería para SY89872UMI — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | SY89872UMG |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Package | 16-VFQFN Exposed Pad, 16-MLF | 16-VFQFN Exposed Pad, 16-MLF |
| Product Type | Clock fanout buffer and divider IC | Programmable clock divider and fanout buffer |
| Fanout Ratio | 1:3 | 1:3 |
| Maximum Frequency | 2 GHz | 2 GHz |
| Supply Voltage | 2.5 V | 2.5 V |
| Input Logic | CML, HSTL, LVDS, or LVPECL | CML, HSTL, LVDS, or LVPECL |
| Output Logic | LVDS | LVDS |
| Internal Termination | Yes | Yes |
| Number of Outputs | 3 outputs | 3 outputs |
Diferenciadores clave
- Combines programmable division with three-way fanout (frente a SY89872UMG)
- Broad differential input-format support (frente a SY89872UMG)
- High-speed differential distribution in a compact package (frente a SY89872UMG)
Notas de diseño
Route every differential clock input and output as a tightly coupled pair with a continuous ground reference beneath or beside the pair. Keep the SY89872UMI clock connections short, avoid stubs, and maintain matched geometry where outputs feed related devices. Place programming-control components and any required termination close to their associated pins. Differential symmetry is particularly important because mismatched skew can degrade duty cycle and reduce the timing margin at a 2 GHz receiver even when the nominal clock frequency is correct.
Use the manufacturer's recommended power-supply connection and decoupling arrangement for the 2.5 V rail. Place the input and output bypass capacitors close to their corresponding pins with short supply and ground paths, and connect the exposed pad according to the manufacturer layout instructions. Avoid placing high-current return paths between the device and its bypass network. Because the exact capacitor values and exposed-pad requirements are not reproduced in the technical summary, use the current Microchip PDF and its reference layout for production implementation.
Confirm the source logic standard, termination method, programmed divide ratio, and destination thresholds before enabling the clock. The SY89872UMI accepts CML, HSTL, LVDS, and LVPECL inputs and has internal termination, but those features do not remove the need to match the upstream driver's voltage, impedance, and topology. Review edge rate, jitter, duty-cycle distortion, and output-to-output skew with realistic PCB loading. Use receiver eye and timing measurements if the system operates near the documented 2 GHz limit.
Información de cumplimiento
The reviewed technical information does not state RoHS, REACH, halogen-free, lead-free, or conflict-minerals declarations. AEC-Q100 is treated as not applicable because the device is categorized as a clock and timing integrated circuit rather than an automotive-qualified power device.