Microchip Technology

SY89872UMI - 2GHz 1:3 LVDS Clock Fanout Buffer | Microchip

Teilenummer: SY89872UMI ✓ Aktiv
2.5 V Vdss 16-VFQFN exposed pad, 16-MLF Package 2 GHz Speed
MOQ: 1 |

SY89872UMI Übersicht

The Microchip Technology SY89872UMI is a 1:3 clock fanout buffer and programmable divider IC with a maximum operating frequency of 2 GHz, differential LVDS outputs, and a 16-VFQFN exposed-pad package. It accepts CML, HSTL, LVDS, or LVPECL input formats and operates from a 2.5 V supply. These characteristics place it in the clock distribution and generation segment of clock and timing integrated circuits.

A clock fanout buffer is a timing integrated circuit that distributes one input clock to multiple synchronized outputs. Clock buffers and drivers belong to the broader clock distribution and generation hierarchy, where they support high-speed communications, processors, converters, and test equipment. A divider can reduce the incoming clock frequency, while the fanout stage provides multiple copies of the resulting clock. Differential clocking helps preserve signal integrity when traces must travel between distant circuit blocks.

The SY89872UMI combines a 1:3 fanout ratio with a 2 GHz maximum frequency in one compact package. Its input receiver supports CML, HSTL, LVDS, and LVPECL signaling, allowing the device to work with several high-speed clock sources. LVDS is used at the outputs, and the 16-VFQFN package includes an exposed pad that provides a defined thermal-coupling path on the PCB. Internal termination is identified in the manufacturer documentation.

The SY89872U family combines programmable clock division with fanout buffering. Programmable division allows a system clock to be reduced when a downstream circuit cannot operate at the source rate. The 1:3 topology then distributes the selected clock to three destinations, reducing the number of separate buffer devices required on a board. Its differential interfaces support point-to-point links carrying complementary clock signals.

Typical applications include high-speed serial-interface clock distribution, communication equipment, data-converter clocking, FPGA or ASIC clock distribution, and instrumentation requiring multiple synchronized outputs. A three-output arrangement is particularly useful when related circuits require one common clock but are separated by PCB-routing distance. Differential LVDS outputs are useful where trace length, ground references, or nearby switching circuitry could degrade a single-ended clock.

PCB implementation should follow the manufacturer pinout and layout guidance, especially for the exposed pad, supply decoupling, differential input routing, and output termination. Keep the clock path short and symmetrical, provide a continuous ground reference, and place decoupling capacitance close to the supply pins. Confirm the programmed divide setting, supported input logic level, termination requirements, and output timing against the system clock specification before production release.

This product page organizes the principal device characteristics, application guidance, design considerations, and drop-in alternatives for engineering evaluation. It also distinguishes documented functions from parameters that require confirmation from the manufacturer datasheet before schematic release or qualification.

Drop-in-Alternativen für SY89872UMI – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit SY89872UMI (gleiche Bauform und Footprint) – abweichend in Product Type.

Microchip Technology
Product Type: Precision LVDS clock divider and fanout buffer
Vergleichen mit SY89872UMI →

SY89872UMG

✅ Drop-In ⚠️ Spezifikationen ungeprüft
Microchip Technology
📦 16-VFQFN Exposed Pad, 16-MLF
Precision LVDS clock divider and fanout buffer · >2 GHz · 1:3 · 2.5 V · 2.375 V to 2.625 V · -40°C to +85°C · LVDS · CML, LVPECL, HSTL, or LVDS

Preis auf Anfrage

Datenblatt ansehen →

SY89872UMI Technische Daten

Product Type Clock fanout buffer and divider IC
Fanout Ratio 1:3
Maximum Frequency 2 GHz
Versorgungsspannung 2.5 V
Output Logic LVDS
Input Logic CML, HSTL, LVDS, or LVPECL
Anzahl der Ausgänge 3 outputs
Number of Circuits 1 circuit
Gehäuse 16-VFQFN exposed pad, 16-MLF
Internal Termination Yes
Programmable Divide Programmable
Input Differential Signaling Any differential input
RoHS-Status unknown
REACH Status unknown

SY89872UMI 16-vfqfn exposed pad, 16-mlf Pinbelegungsleitfaden

Pinbelegung für SY89872UMI (16-vfqfn exposed pad, 16-mlf-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.

Pinbelegungsdiagramm für SY89872UMI im 16-vfqfn exposed pad, 16-mlf-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für SY89872UMI.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

SY89872UMI ist geeignet für 6 Anwendungs: High-Speed Communication Clock Distribution, FPGA Clock Tree Design, ASIC Parallel and SerDes Clocking, Data Converter Clocking, Instrumentation and Test Equipment, Industrial Control and Robotics.

🌐

High-Speed Communication Clock Distribution

The SY89872UMI fits communication systems that require one high-speed differential clock to feed three related destinations. Its 1:3 fanout ratio reduces the number of separate buffer stages, while the 2 GHz maximum frequency supports demanding serial-link and data-conversion clock trees. CML, HSTL, LVDS, and LVPECL input acceptance allows the device to operate with multiple high-speed source conventions, and LVDS outputs provide a consistent destination format. Designers should verify input and output timing against the selected data rate, keep differential routes symmetrical, and confirm the programmed divide setting against each receiver's frequency limit.

🖥️

FPGA Clock Tree Design

The SY89872UMI is useful in FPGA clock trees requiring three synchronized destinations from one differential source. A programmable divider can reduce the incoming clock, while the 1:3 fanout stage distributes the result to related FPGA clock inputs. Its 2 GHz capability is appropriate for high-performance logic fabrics and high-speed transceiver-related clocking, subject to the FPGA's documented input-frequency ceiling. The 2.5 V supply and LVDS outputs simplify current-interface planning, but engineers must confirm voltage compatibility, input standards, jitter requirements, and acquisition timing for the specific FPGA and clock source.

⚡

ASIC Parallel and SerDes Clocking

The SY89872UMI can divide and fan out a differential reference clock for an ASIC with multiple internal clock domains. Its 1:3 architecture is valuable when a source clock must reach three related blocks without duplicating complete buffer devices, and the 2 GHz rating supports high-speed internal reference distribution. LVDS outputs suit links carrying complementary clock signals across a controlled PCB environment. Before implementation, compare the device's input and output timing, jitter, output amplitude, and divide options against the ASIC clock specification. Route each differential pair as a coupled pair and confirm the exposed-pad grounding arrangement in the manufacturer layout guidance.

📺

Data Converter Clocking

The SY89872UMI suits high-speed ADC and DAC clock systems that need multiple synchronized sampling or update clocks. The input receiver supports CML, HSTL, LVDS, and LVPECL, which allows it to follow several common converter-clock source formats, while its LVDS outputs provide three fanout destinations. The 2 GHz maximum frequency supports demanding conversion rates, but actual converter bandwidth, jitter sensitivity, and clock-input thresholds remain decisive. Use matched routing for each differential output, account for the programmed divider delay, and verify acquisition and hold timing at the converter pins before releasing the clock architecture.

🔧

Instrumentation and Test Equipment

The SY89872UMI is applicable to instrumentation requiring a precise differential reference clock divided and distributed across three measurement or processing sections. Its 1:3 topology can supply sampling, conversion, and processing blocks from one source, while the 2 GHz rating accommodates fast converters and counters. Differential LVDS signaling helps maintain clock integrity over longer controlled board routes compared with an exposed single-ended implementation. Engineers should account for input-to-output latency, divide-ratio-dependent timing, clock jitter, and receiver setup requirements. Short matched routing and a continuous ground plane remain important when the device operates beside high-current analog and switching sections.

🏭

Industrial Control and Robotics

The SY89872UMI can distribute a common differential clock among control, communication, and monitoring subsystems in an industrial or robotic controller. A single 1:3 fanout supports three clocked destinations without adding separate one-output buffers, while the programmable divider lets one high-frequency source serve slower downstream logic. The 2 GHz maximum frequency provides margin for high-rate digital interfaces, and LVDS outputs suit controlled backplane or PCB interconnects. Confirm industrial temperature requirements, electromagnetic-emissions constraints, grounding strategy, and timing tolerance for each subsystem. The exposed thermal pad should be connected to the PCB ground plane as directed by the manufacturer layout guidance.

What are the key specifications of SY89872UMI that engineers should know?
The SY89872UMI is a 1:3 clock fanout buffer and divider IC rated to 2 GHz, with differential LVDS outputs and CML, HSTL, LVDS, or LVPECL input support. According to the Microchip manufacturer datasheet, it operates from 2.5 V and uses a 16-VFQFN exposed-pad package. Internal input termination is also identified in the device description. These specifications make it relevant to high-speed clock distribution, data-converter clocking, FPGA clocking, and communication equipment where three synchronized outputs are required from one source.
Where can I download the SY89872UMI datasheet PDF?
The SY89872UMI datasheet is available through the Microchip manufacturer documentation identified for this device. The documented title describes it as a 2.5 V, 2 GHz any-differential-input-to-LVDS programmable clock divider and fanout buffer with internal termination. Use the manufacturer PDF for the authoritative pin-description table, divide-ratio table, electrical characteristics, timing diagrams, recommended PCB layout, and exposed-pad connection details. The product-page PDF link provides the most appropriate starting point for design release.
Where can I find the SY89872UMI pinout?
The SY89872UMI pinout is documented in the manufacturer pin-description table for the 16-VFQFN exposed-pad package. The package contains 16 terminals plus the exposed thermal pad represented by the package description. Use the pin table when assigning input clock pairs, differential outputs, supply, ground, programming controls, and exposed-pad connections. Confirm numbering and exposed-pad requirements directly from the current Microchip PDF before laying out a PCB, because package drawings and programming options must remain aligned.
What clock input formats does the SY89872UMI accept?
The SY89872UMI accepts CML, HSTL, LVDS, and LVPECL differential clock inputs. According to the Microchip manufacturer datasheet, it is designed for any differential input and includes internal termination. The accepted logic standard should be selected according to the source amplitude, common-mode level, and termination arrangement used by the upstream clock driver. This input flexibility is useful when distributing clocks across systems that combine different high-speed clocking conventions.
What is the maximum frequency of the SY89872UMI?
The maximum operating frequency of the SY89872UMI is 2 GHz. According to the Microchip manufacturer datasheet, this rating applies to the device's high-speed differential clock divider and fanout operation. Actual usable frequency also depends on the selected divide ratio, input logic amplitude, output loading, PCB routing, and the timing requirements of the receiving circuit. Evaluate worst-case rise and fall times rather than relying only on the clock period when designing a new two-gigahertz interface.
What does the 1:3 fanout ratio mean for the SY89872UMI?
The 1:3 fanout ratio means one differential input clock is distributed to three differential LVDS output clocks. The SY89872UMI therefore provides three synchronized copies rather than requiring three separate one-output buffer devices. This arrangement can simplify clock-tree design in systems with multiple related destinations. Check output-to-output skew and each receiver's setup and hold requirements in the timing documentation when the three outputs feed devices with different trace lengths.
Is the SY89872UMI suitable for FPGA and ASIC clock distribution?
The SY89872UMI is suitable for FPGA or ASIC clock distribution when the design uses a 2.5 V supply, differential high-speed clocking, and up to three LVDS clock destinations. Its 1:3 fanout can distribute one source to three related logic blocks, while the programmable divider can reduce a higher-frequency input when required. Confirm the FPGA clock-input standard, maximum input frequency, divide settings, jitter budget, and I/O voltage before selecting the device for a specific device family.
When should I choose the SY89872UMI over a plain clock buffer?
Choose the SY89872UMI when the design needs both clock division and three-way distribution in one 16-VFQFN device. A plain buffer would be appropriate only when no divide function is required and separate logic is otherwise needed for frequency reduction. The SY89872UMI supports CML, HSTL, LVDS, or LVPECL inputs and produces differential LVDS outputs, so it can also simplify systems that would otherwise require input-format conversion, separate divider circuitry, and multiple fanout buffers.
What is the difference between SY89872UMI and SY89872UMG?
SY89872UMI and SY89872UMG are variants in the same Microchip SY89872U family, and the documented core function of both is programmable clock division with 1:3 differential fanout. The verified component information for SY89872UMI identifies a 2 GHz maximum frequency, 2.5 V operation, LVDS outputs, and a 16-VFQFN exposed-pad package. Before replacing one ordering code with the other, confirm the manufacturer ordering table for temperature grade, packing, qualification, and lifecycle terms. The package and core clock parameters alone do not establish order-code interchangeability.
What is the best drop-in replacement for SY89872UMI?
The closest documented same-family candidate is the Microchip SY89872UMG, which belongs to the SY89872U programmable clock divider and fanout family. It provides distinct engineering value as a family alternative that can be evaluated against the same 1:3 clock-tree architecture. However, no verified cross-manufacturer part was shown to have the identical 16-VFQFN pinout, 2 GHz rating, 2.5 V supply, input logic options, and LVDS output arrangement. Use the Request a Quote form on this page for availability and review the manufacturer ordering table before approving a substitution.
Can a competitor equivalent replace the SY89872UMI without PCB changes?
A competitor part should not be treated as a no-change replacement without verified pin-to-pin and parametric equivalence. The required comparison includes the 16-VFQFN exposed-pad footprint, 1:3 fanout ratio, programmable division, 2 GHz maximum frequency, 2.5 V supply, CML/HSTL/LVDS/LVPECL input support, LVDS outputs, internal termination, and timing behavior. No cross-manufacturer candidate in the reviewed cross-reference results met that complete drop-in test, so redesign or board changes may be necessary.
Where can I buy SY89872UMI online?
The SY89872UMI can be requested through the Request a Quote form on this page. The form is the appropriate route for current lead time, stock status, minimum order quantity, and shipment requirements without embedding stale commercial information in technical content. Before ordering, confirm that the requested order code, package, and qualification requirements match the manufacturer ordering information. Current supply status should also be reconfirmed before committing a production schedule.
What is the price of SY89872UMI?
The current SY89872UMI price is obtained through the Request a Quote form on this page. The form allows quantity, target date, and project requirements to be included with the request so the commercial response reflects the actual order configuration. Price should not be inferred from a clock-buffer family listing because package suffix, quantity, and shipment terms can change the commercial result. Use the structured quote workflow rather than relying on an informal single-unit indication.
What is the lead time for SY89872UMI?
The current SY89872UMI lead time is provided through the Request a Quote form on this page. Include the required quantity, standard or expedited shipment preference, target delivery date, and production schedule in the request. A lead-time confirmation should also identify the selected order code and package. This approach prevents an outdated generic estimate from being used in a build plan and allows procurement to check current manufacturing and material availability for the exact configuration.
Is SY89872UMI in stock?
Current SY89872UMI stock status should be confirmed through the Request a Quote form on this page. Provide the required quantity and intended delivery schedule so the commercial response reflects current inventory and replenishment conditions. Do not treat a distributor category page or general product listing as a guaranteed stock commitment. For production planning, request separate confirmation of allocation, shipment timing, and any traceability requirements associated with the selected order configuration.

Technische Referenzdaten für SY89872UMI – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the SY89872UMI when a system needs one differential clock source to feed three destinations and may also require programmable frequency division. Its support for CML, HSTL, LVDS, and LVPECL inputs is valuable when the upstream clock driver uses one of those common high-speed conventions, while the LVDS outputs provide a consistent downstream interface. The 2 GHz maximum frequency supports demanding communication, converter, FPGA, ASIC, and instrumentation clock trees. Evaluate SY89872UMG as the closest documented same-family alternative when its order-code temperature, qualification, packing, and commercial terms better fit the project. Do not treat an arbitrary clock buffer as a drop-in substitute because the target also combines programmable division, internal termination, a 1:3 topology, four input formats, and LVDS outputs. Before schematic release, verify the pin table, divide settings, timing limits, exposed-pad connection, decoupling, and differential routing requirements against the current Microchip manufacturer documentation.

Vergleich mit Alternativen

Parameter Dieses Produkt SY89872UMG
Brand Microchip Technology Microchip Technology
Package 16-VFQFN Exposed Pad, 16-MLF 16-VFQFN Exposed Pad, 16-MLF
Product Type Clock fanout buffer and divider IC Programmable clock divider and fanout buffer
Fanout Ratio 1:3 1:3
Maximum Frequency 2 GHz 2 GHz
Supply Voltage 2.5 V 2.5 V
Input Logic CML, HSTL, LVDS, or LVPECL CML, HSTL, LVDS, or LVPECL
Output Logic LVDS LVDS
Internal Termination Yes Yes
Number of Outputs 3 outputs 3 outputs

Wichtigste Unterscheidungsmerkmale

  • Combines programmable division with three-way fanout (vs. SY89872UMG)
  • Broad differential input-format support (vs. SY89872UMG)
  • High-speed differential distribution in a compact package (vs. SY89872UMG)

Designhinweise

Route every differential clock input and output as a tightly coupled pair with a continuous ground reference beneath or beside the pair. Keep the SY89872UMI clock connections short, avoid stubs, and maintain matched geometry where outputs feed related devices. Place programming-control components and any required termination close to their associated pins. Differential symmetry is particularly important because mismatched skew can degrade duty cycle and reduce the timing margin at a 2 GHz receiver even when the nominal clock frequency is correct.

Use the manufacturer's recommended power-supply connection and decoupling arrangement for the 2.5 V rail. Place the input and output bypass capacitors close to their corresponding pins with short supply and ground paths, and connect the exposed pad according to the manufacturer layout instructions. Avoid placing high-current return paths between the device and its bypass network. Because the exact capacitor values and exposed-pad requirements are not reproduced in the technical summary, use the current Microchip PDF and its reference layout for production implementation.

Confirm the source logic standard, termination method, programmed divide ratio, and destination thresholds before enabling the clock. The SY89872UMI accepts CML, HSTL, LVDS, and LVPECL inputs and has internal termination, but those features do not remove the need to match the upstream driver's voltage, impedance, and topology. Review edge rate, jitter, duty-cycle distortion, and output-to-output skew with realistic PCB loading. Use receiver eye and timing measurements if the system operates near the documented 2 GHz limit.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The reviewed technical information does not state RoHS, REACH, halogen-free, lead-free, or conflict-minerals declarations. AEC-Q100 is treated as not applicable because the device is categorized as a clock and timing integrated circuit rather than an automotive-qualified power device.

Daten verifiziert am: 2026-11-10 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

SY89872UMI datasheet SY89872UMI pinout SY89872UMI datasheet pdf SY89872UMI specifications SY89872UMI equivalent SY89872UMI replacement SY89872UMI cross reference SY89872UMI vs SY89872UMG SY89872UMI 2GHz clock buffer SY89872UMI 16-VFQFN footprint SY89872UMI FPGA clock SY89872UMI LVDS fanout SY89872UMI price Microchip Technology SY89872UMI

Verwandte Bauteile & Begriffe

Microchip Technology SY89872UMI SY89872UMG clock fanout buffer clock buffer and driver programmable clock divider clock distribution and generation clock and timing integrated circuit semiconductor 1:3 fanout 2 GHz clock 2.5 V supply LVDS CML HSTL LVPECL differential clock internal termination 16-VFQFN 16-MLF exposed pad surface mount FPGA clock tree ASIC clock distribution data converter clocking
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen