TCA8418RTWR - 18-Bit 1MHz Keypad Scanner | Texas Instruments
N.º de pieza: TCA8418RTWR ✓ ActivoTCA8418RTWR Descripción general
A keypad scanner is an interface IC that detects button presses and reports their locations through a serial bus. The TCA8418 belongs to the broader GPIO expander and human-machine-interface controller hierarchy. It periodically scans matrix inputs, manages event and debounce functions, and signals the host through an interrupt output. This allows a microcontroller or application processor to read one or more key states over I2C instead of dedicating individual input pins to every switch.
The principal feature set includes 18 configurable I/O pins, eight-row by ten-column keypad support, up to 80 keys, 1 MHz I2C/SMBus operation, and integrated ESD protection. A dedicated interrupt output reduces the need for continuous host polling, while a reset input supports deterministic initialization. The 24-pin WQFN package also includes an exposed pad, allowing the PCB to provide a low-impedance thermal and electrical ground connection according to the manufacturer's land-pattern requirements.
Technically, the device is designed for low-voltage embedded systems whose keypad capacitance and leakage characteristics suit the integrated scanning circuitry. The operating range of 1.65 V through 3.6 V supports connection to common embedded processor I/O voltages. Its 1 MHz serial interface capability provides higher communication bandwidth than slower standard-mode-only keypad controllers, although the host bus, pullups, capacitance, and firmware must all support the selected operating rate.
Typical uses include portable consumer equipment, personal digital assistants, portable audio and video products, and smartphones, as identified by the manufacturer. It can also manage compact numeric keypads, function buttons, menu controls, and general-purpose digital input/output lines in industrial panels or embedded control heads. The interrupt architecture is particularly useful in battery-powered equipment because it allows the processor to remain idle between key events rather than poll the keypad continuously.
PCB implementation should prioritize short I2C routing, correct pullup placement, exposed-pad solderability, and protection from conductive contamination around the keys. Confirm the exact pin assignments and pin multiplexing options in the manufacturer pin-description table before assigning rows, columns, GPIOs, interrupt, reset, or ground functions. Avoid adding external row or column pullups unless the selected operating mode or application requires them, because the device already incorporates integrated pullup circuitry.
This product page consolidates the manufacturer's key specifications, verified sourcing information, pin-package constraints, and application guidance into a single engineering reference. It also separates confirmed electrical facts from parameters that require consultation of the full TCA8418 datasheet, helping designers plan keypad scans, bus connections, PCB layout, and firmware integration before layout release.
Alternativas directas para TCA8418RTWR — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
No hay alternativas directas disponibles para este producto.
Solicitar alternativasTCA8418RTWR Especificaciones
| Device Type | I2C/SMBus keypad scanner and GPIO expander |
| I/O Bit Count | 18 bits |
| Tensión de alimentación de funcionamiento | 1.65 V to 3.6 V |
| Maximum I2C/SMBus Frequency | 1 MHz |
| Maximum Key Count | 80 keys |
| Keypad Matrix Configuration | 8 rows x 10 columns |
| Interrupt Support | Yes |
| Reset Support | Yes |
| Integrated Pullup Resistors | Yes |
| ESD Protection | Integrated |
| Encapsulado | 24-pin WQFN (RTW) |
| Package Body Size | 4 mm x 4 mm |
| Rango de temperatura de funcionamiento | -40 °C to 85 °C |
| Tipo de montaje | Surface mount |
| Número de pines | 24 pins |
| Output Current | 25 mA |
Guía de configuración de pines de TCA8418RTWR 4 mm x 4 mm
Configuración de pines para TCA8418RTWR (encapsulado 4 mm x 4 mm). La numeración de pines, las funciones y los diagramas de conexión se definen en la hoja de datos del fabricante. Consúltela para conocer el footprint exacto y las directrices de soldadura.
No hay datos detallados de patillaje disponibles para TCA8418RTWR.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
TCA8418RTWR es adecuado para 6 aplicacións: Portable Media Player Keypad, PDA Navigation Controls, Smartphone Accessory Controls, Industrial Control Panel Keypad, Battery-Powered Embedded Controller, Portable Audio and Video Interface.
Portable Media Player Keypad
The TCA8418RTWR fits compact media-player and portable-audio controls because it can scan as many as 80 keys across an 8-row by 10-column matrix while occupying only one I2C/SMBus address. Its 1.65 V to 3.6 V operating range accommodates low-voltage embedded processors, and the interrupt output allows the host to wake only when a control event occurs. The 24-pin WQFN package reduces board area, while integrated row and column pullups simplify the passive key matrix. Firmware should still initialize the scan configuration and verify the host bus pullups independently.
PDA Navigation Controls
A personal digital assistant can use the TCA8418RTWR to consolidate navigation keys, function buttons, and other digital controls behind I2C/SMBus. The 18 available I/O bits support an 8-row by 10-column keypad arrangement, providing substantial capacity for compact navigation panels without assigning a dedicated processor pin to every switch. The interrupt signal supports event-driven firmware and can reduce unnecessary polling in portable systems. Its 4 mm by 4 mm WQFN footprint is especially useful where board area is constrained.
Smartphone Accessory Controls
The TCA8418RTWR can serve as the keypad controller in smartphone accessories that add physical navigation, volume, or function keys to an I2C-capable accessory interface. The 1 MHz bus rate provides adequate throughput for register access and event reporting, while the 1.65 V minimum operating voltage supports low-voltage accessory ecosystems. A system architect should verify pin multiplexing, electrical levels, interrupt polarity, and bus timing against the accessory specification. The compact WQFN package leaves more board area for radio, charging, or sensor circuitry.
Industrial Control Panel Keypad
For an industrial control head, the TCA8418RTWR can scan a dense keypad and report events through the host bus without consuming 18 dedicated microcontroller GPIO pins. Its matrix capacity of 80 keys is suitable for numeric entry, function selection, and machine-control menus. The interrupt output supports efficient event-driven operation, while integrated pullups reduce passive-matrix component count. For industrial deployment, protect the keypad connector and exposed-pad area from contamination and verify the complete operating-temperature range of -40 °C to 85 °C.
Battery-Powered Embedded Controller
The TCA8418RTWR is useful in battery-powered embedded controllers where conserving processor active time is important. The host can remain idle between key presses and use the interrupt output to request service, avoiding continuous polling of an 8-row by 10-column matrix. Low-voltage operation from 1.65 V to 3.6 V supports power-conscious embedded designs, while integrated matrix pullups can reduce external component count. The final power budget should include the controller, keypad leakage, pullup current, and any LED indicators connected to the same board.
Portable Audio and Video Interface
The TCA8418RTWR can centralize controls for portable audio and video equipment, including playback, volume, menu, and channel-selection buttons. Up to 80 keys are supported, while the serial interface preserves processor GPIO resources and the interrupt output supports responsive event handling. Its 4 mm by 4 mm WQFN package suits densely populated portable products. Designers should check the exposed-pad land pattern, maintain suitable separation from sensitive analog and radio circuitry, and confirm that the selected host controller supports the intended 1 MHz bus rate.
Datos de referencia de ingeniería para TCA8418RTWR — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto |
|---|---|
| Package | 24-pin WQFN (RTW), 4 mm x 4 mm |
| Brand | Texas Instruments |
| Device Type | I2C/SMBus keypad scanner and GPIO expander |
| I/O Bit Count | 18 bits |
| Operating Supply Voltage | 1.65 V to 3.6 V |
| Maximum Bus Frequency | 1 MHz |
| Maximum Key Count | 80 keys |
| Keypad Matrix | 8 rows x 10 columns |
| Interrupt and Reset | Both supported |
| Operating Temperature | -40 °C to 85 °C |
Diferenciadores clave
- High key density for a compact serial-interface controller (frente a Generic 4-row by 4-column keypad expander)
- Faster serial communication capability (frente a Standard 100 kHz I2C keypad controller)
- Compact board footprint with matrix integration (frente a Discreet matrix-switch scanning circuit)
Notas de diseño
Follow the manufacturer land-pattern requirements for the 24-pin WQFN RTW package, including the exposed thermal pad, solder mask, and paste apertures. The exposed pad must be connected to the appropriate ground plane and soldered according to the package drawing. Review the pad and pin numbering directly in the TCA8418 datasheet before assigning rows, columns, GPIO functions, interrupt, reset, and supply pins.
Keep the I2C/SMBus traces short and route them away from switching nodes and high-current return paths. Size the host-bus pullups for the processor I/O voltage, total bus capacitance, and selected operating frequency. Although the keypad matrix includes integrated pullups, those internal resistors do not replace the pullups required on the serial communication bus.
Do not assume that every TCA84xx keypad controller is a drop-in substitute. The TCA8417 and TCA8416 are related options, but pin functions, voltage limits, register maps, matrix capacity, and interrupt behavior must be compared against the TCA8418 before substitution. Also avoid adding unnecessary external pullups to row or column inputs because the TCA8418 incorporates pullup circuitry.
Información de cumplimiento
The product is a keypad-scanning interface IC rather than an automotive-qualified device. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not established by the available product information.