Texas Instruments

TCA8418RTWR - 18-Bit 1MHz Keypad Scanner | Texas Instruments

部品番号: TCA8418RTWR ✓ 生産中
1.65 V to 3.6 V Vdss 25 mA Id 24-pin WQFN (RTW) Package 1 MHz Speed
MOQ: 1 |

TCA8418RTWR 概要

Texas Instruments TCA8418RTWR is an 18-bit I2C/SMBus keypad scanner and GPIO expander with a 1.65 V to 3.6 V operating range, 1 MHz bus speed, interrupt and reset functions, and support for as many as 80 keys. The device is supplied in a 24-pin WQFN RTW package measuring 4 mm by 4 mm. Its 18 general-purpose I/O lines can be configured as eight keypad rows and ten columns, while integrated pullup resistors simplify attached passive key matrices.

A keypad scanner is an interface IC that detects button presses and reports their locations through a serial bus. The TCA8418 belongs to the broader GPIO expander and human-machine-interface controller hierarchy. It periodically scans matrix inputs, manages event and debounce functions, and signals the host through an interrupt output. This allows a microcontroller or application processor to read one or more key states over I2C instead of dedicating individual input pins to every switch.

The principal feature set includes 18 configurable I/O pins, eight-row by ten-column keypad support, up to 80 keys, 1 MHz I2C/SMBus operation, and integrated ESD protection. A dedicated interrupt output reduces the need for continuous host polling, while a reset input supports deterministic initialization. The 24-pin WQFN package also includes an exposed pad, allowing the PCB to provide a low-impedance thermal and electrical ground connection according to the manufacturer's land-pattern requirements.

Technically, the device is designed for low-voltage embedded systems whose keypad capacitance and leakage characteristics suit the integrated scanning circuitry. The operating range of 1.65 V through 3.6 V supports connection to common embedded processor I/O voltages. Its 1 MHz serial interface capability provides higher communication bandwidth than slower standard-mode-only keypad controllers, although the host bus, pullups, capacitance, and firmware must all support the selected operating rate.

Typical uses include portable consumer equipment, personal digital assistants, portable audio and video products, and smartphones, as identified by the manufacturer. It can also manage compact numeric keypads, function buttons, menu controls, and general-purpose digital input/output lines in industrial panels or embedded control heads. The interrupt architecture is particularly useful in battery-powered equipment because it allows the processor to remain idle between key events rather than poll the keypad continuously.

PCB implementation should prioritize short I2C routing, correct pullup placement, exposed-pad solderability, and protection from conductive contamination around the keys. Confirm the exact pin assignments and pin multiplexing options in the manufacturer pin-description table before assigning rows, columns, GPIOs, interrupt, reset, or ground functions. Avoid adding external row or column pullups unless the selected operating mode or application requires them, because the device already incorporates integrated pullup circuitry.

This product page consolidates the manufacturer's key specifications, verified sourcing information, pin-package constraints, and application guidance into a single engineering reference. It also separates confirmed electrical facts from parameters that require consultation of the full TCA8418 datasheet, helping designers plan keypad scans, bus connections, PCB layout, and firmware integration before layout release.

ドロップイン代替品: TCA8418RTWR — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

この製品に利用可能なドロップイン代替品はありません。

代替品をリクエスト

TCA8418RTWR 仕様

Device Type I2C/SMBus keypad scanner and GPIO expander
I/O Bit Count 18 bits
動作電源電圧 1.65 V to 3.6 V
Maximum I2C/SMBus Frequency 1 MHz
Maximum Key Count 80 keys
Keypad Matrix Configuration 8 rows x 10 columns
Interrupt Support Yes
Reset Support Yes
Integrated Pullup Resistors Yes
ESD Protection Integrated
パッケージ 24-pin WQFN (RTW)
Package Body Size 4 mm x 4 mm
動作温度範囲 -40 °C to 85 °C
実装タイプ Surface mount
ピン数 24 pins
Output Current 25 mA

TCA8418RTWR 4 mm x 4 mm ピン配置ガイド

TCA8418RTWR (4 mm x 4 mm パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。

TCA8418RTWR の 4 mm x 4 mm パッケージピン配置図

詳細なピン配置データはありません: TCA8418RTWR.

詳細は データシート をご参照ください。

主な用途

TCA8418RTWR の用途: 6 件s: Portable Media Player Keypad, PDA Navigation Controls, Smartphone Accessory Controls, Industrial Control Panel Keypad, Battery-Powered Embedded Controller, Portable Audio and Video Interface.

🎧

Portable Media Player Keypad

The TCA8418RTWR fits compact media-player and portable-audio controls because it can scan as many as 80 keys across an 8-row by 10-column matrix while occupying only one I2C/SMBus address. Its 1.65 V to 3.6 V operating range accommodates low-voltage embedded processors, and the interrupt output allows the host to wake only when a control event occurs. The 24-pin WQFN package reduces board area, while integrated row and column pullups simplify the passive key matrix. Firmware should still initialize the scan configuration and verify the host bus pullups independently.

📱

PDA Navigation Controls

A personal digital assistant can use the TCA8418RTWR to consolidate navigation keys, function buttons, and other digital controls behind I2C/SMBus. The 18 available I/O bits support an 8-row by 10-column keypad arrangement, providing substantial capacity for compact navigation panels without assigning a dedicated processor pin to every switch. The interrupt signal supports event-driven firmware and can reduce unnecessary polling in portable systems. Its 4 mm by 4 mm WQFN footprint is especially useful where board area is constrained.

📱

Smartphone Accessory Controls

The TCA8418RTWR can serve as the keypad controller in smartphone accessories that add physical navigation, volume, or function keys to an I2C-capable accessory interface. The 1 MHz bus rate provides adequate throughput for register access and event reporting, while the 1.65 V minimum operating voltage supports low-voltage accessory ecosystems. A system architect should verify pin multiplexing, electrical levels, interrupt polarity, and bus timing against the accessory specification. The compact WQFN package leaves more board area for radio, charging, or sensor circuitry.

🏭

Industrial Control Panel Keypad

For an industrial control head, the TCA8418RTWR can scan a dense keypad and report events through the host bus without consuming 18 dedicated microcontroller GPIO pins. Its matrix capacity of 80 keys is suitable for numeric entry, function selection, and machine-control menus. The interrupt output supports efficient event-driven operation, while integrated pullups reduce passive-matrix component count. For industrial deployment, protect the keypad connector and exposed-pad area from contamination and verify the complete operating-temperature range of -40 °C to 85 °C.

⚡

Battery-Powered Embedded Controller

The TCA8418RTWR is useful in battery-powered embedded controllers where conserving processor active time is important. The host can remain idle between key presses and use the interrupt output to request service, avoiding continuous polling of an 8-row by 10-column matrix. Low-voltage operation from 1.65 V to 3.6 V supports power-conscious embedded designs, while integrated matrix pullups can reduce external component count. The final power budget should include the controller, keypad leakage, pullup current, and any LED indicators connected to the same board.

🎧

Portable Audio and Video Interface

The TCA8418RTWR can centralize controls for portable audio and video equipment, including playback, volume, menu, and channel-selection buttons. Up to 80 keys are supported, while the serial interface preserves processor GPIO resources and the interrupt output supports responsive event handling. Its 4 mm by 4 mm WQFN package suits densely populated portable products. Designers should check the exposed-pad land pattern, maintain suitable separation from sensitive analog and radio circuitry, and confirm that the selected host controller supports the intended 1 MHz bus rate.

What is the TCA8418RTWR?
The TCA8418RTWR is an 18-bit I2C/SMBus keypad scanner and GPIO expander from Texas Instruments. According to the manufacturer product page, it operates from 1.65 V to 3.6 V, supports communication at up to 1 MHz, and scans as many as 80 keys. The part is packaged in a 24-pin WQFN RTW package with a 4 mm by 4 mm body for compact portable equipment.
How many keys can the TCA8418RTWR scan?
The TCA8418RTWR can support up to 80 keys in an 8-row by 10-column matrix. Its 18 I/O lines are divided between the eight row connections and ten column connections, while the host reads detected events through the I2C/SMBus interface. Texas Instruments identifies 80-key support as a principal feature of the TCA8418 on its official product page.
What is the operating voltage of the TCA8418RTWR?
The TCA8418RTWR operates from 1.65 V to 3.6 V according to the Texas Instruments product page. This range suits low-voltage embedded systems with 1.8 V, 2.5 V, or 3.3 V processor I/O rails. The host interface voltage, pullup arrangement, and external circuitry should all remain consistent with the manufacturer-recommended operating conditions.
Where can I download the TCA8418RTWR datasheet?
The official TCA8418 datasheet can be downloaded from the Texas Instruments document link at https://www.ti.com/lit/gpn/TCA8418. Use the manufacturer's pin-description table, electrical characteristics, and application information when assigning the 24 WQFN pins, configuring keypad scanning, and selecting external bus pullups. The RTWR ordering code identifies the tape-and-reel version of the 24-pin RTW package.
Where is the TCA8418RTWR pinout located?
The TCA8418RTWR pinout is located in the pin-description table of the official TCA8418 datasheet at https://www.ti.com/lit/gpn/TCA8418. The component uses a 24-pin WQFN RTW package. Verify row, column, GPIO, interrupt, reset, power, and exposed-pad assignments directly against that table before laying out the PCB or writing firmware.
Does the TCA8418RTWR need external row and column pullups?
The TCA8418RTWR includes integrated pullup resistors, so external row and column pullups are not normally required for its standard keypad-scanning use. Texas Instruments support material specifically notes that no external pullup resistors are needed because the device has integrated pullups. The I2C bus itself still requires correctly designed bus pullups for the host voltage, bus capacitance, and operating speed.
What is the I2C bus speed of the TCA8418RTWR?
The TCA8418RTWR supports I2C/SMBus communication at up to 1 MHz. This gives it substantially more bus bandwidth than a standard 100 kHz implementation while remaining suitable for compact embedded keypads. Actual bus speed also depends on pullup resistance, total bus capacitance, signal integrity, and the operating limits of the connected host controller.
What can replace the TCA8418RTWR?
A true drop-in replacement must use the same 24-pin WQFN RTW footprint and preserve the TCA8418's pin functions, electrical limits, keypad architecture, and serial protocol. Search results identify TCA8417 and TCA8416 as related keypad-controller options, but they are not established here as pin-to-pin substitutes. Use the Texas Instruments cross-reference search and compare the official pin tables before approving a replacement.
Is the TCA8418RTWR the same as the TCA8417 or TCA8416?
No. The TCA8418RTWR, TCA8417, and TCA8416 are related keypad-controller devices, but the search information does not establish that they are electrically or pin-for-pin identical. The TCA8418 is specifically identified as an 18-bit, 1.65 V to 3.6 V, 1 MHz controller with 80-key support. Treat the other devices as alternatives requiring formal pin, register, voltage, and timing comparison.
TCA8418RTWR vs TCA8417: which is better for a keypad design?
Choose the TCA8418RTWR when a design specifically requires its stated combination of 18 I/O bits, an 8-row by 10-column matrix, up to 80 keys, and operation up to 1 MHz. The TCA8417 may be relevant as a related controller, but the two should not be treated as interchangeable without comparing their official pinouts, register maps, supply limits, and key-scanning behavior.
When should I choose the TCA8418RTWR over another keypad controller?
Choose the TCA8418RTWR when a compact design needs an 8-row by 10-column keypad matrix, interrupt-driven host communication, 1.65 V to 3.6 V operation, and an I2C/SMBus rate up to 1 MHz. It is particularly suitable when the host has too few direct GPIO pins to scan the keypad efficiently. Its integrated pullups can also simplify the attached matrix, although host-bus pullups still require separate attention.
Is the TCA8418RTWR suitable for a portable audio or video device?
Yes, the Texas Instruments product page identifies portable audio/video and personal digital assistant applications for the TCA8418 family. The device's 4 mm by 4 mm 24-pin WQFN package, 1.65 V to 3.6 V supply range, 80-key capacity, and interrupt output suit compact portable systems. Layout and firmware should account for the exposed pad, keypad tolerances, and the 1 MHz bus configuration.
Where can I buy the TCA8418RTWR and check current lead time?
Use the Request a Quote form on this page to ask about TCA8418RTWR availability, current lead time, and order quantities. The form is the appropriate route for quote-based purchasing and avoids publishing a price or stock count that may become obsolete. Have the exact RTWR ordering code, target quantity, and delivery location ready when submitting the request.
How much does the TCA8418RTWR cost?
Current commercial terms for the TCA8418RTWR should be requested through the Request a Quote form on this page. The form can establish the applicable unit price, quantity break, stock position, and lead time for the exact 24-pin RTW ordering code. Keep the requested MPN as TCA8418RTWR and specify whether the assembly is for prototype, production, or replenishment demand.
Does the TCA8418RTWR support GPIO expansion as well as key scanning?
Yes, the TCA8418RTWR is an 18-bit keypad scanner and GPIO expander. Its matrix arrangement provides eight row and ten column connections, while the same device can also be used for broader digital input/output expansion. Configuration details determine whether a physical connection is treated as a row, column, or general-purpose I/O function, so consult the register and pin-description tables.

エンジニアリング参考データ: TCA8418RTWR — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the TCA8418RTWR when the design needs a dense keypad, economical use of host GPIO resources, and event-driven communication over I2C/SMBus. Its 8-row by 10-column matrix supports up to 80 keys, the 1.65 V to 3.6 V range suits low-voltage embedded processors, and the 24-pin WQFN package supports compact portable products. TCA8417 and TCA8416 may be considered when their official specifications better match a design, but they should not be treated as drop-in replacements until their pinouts and register behavior are verified. A discrete GPIO expander is appropriate when very few keys are required, while a purpose-built touch controller is preferable for capacitive sensing rather than a passive matrix. For production designs, confirm the exact RTWR footprint, keypad electrical characteristics, bus timing, thermal conditions, and software-driver requirements.

代替品との比較

パラメータ この製品
Package 24-pin WQFN (RTW), 4 mm x 4 mm
Brand Texas Instruments
Device Type I2C/SMBus keypad scanner and GPIO expander
I/O Bit Count 18 bits
Operating Supply Voltage 1.65 V to 3.6 V
Maximum Bus Frequency 1 MHz
Maximum Key Count 80 keys
Keypad Matrix 8 rows x 10 columns
Interrupt and Reset Both supported
Operating Temperature -40 °C to 85 °C

主な差別化要因

  • High key density for a compact serial-interface controller (vs Generic 4-row by 4-column keypad expander)
  • Faster serial communication capability (vs Standard 100 kHz I2C keypad controller)
  • Compact board footprint with matrix integration (vs Discreet matrix-switch scanning circuit)

設計ノート

Follow the manufacturer land-pattern requirements for the 24-pin WQFN RTW package, including the exposed thermal pad, solder mask, and paste apertures. The exposed pad must be connected to the appropriate ground plane and soldered according to the package drawing. Review the pad and pin numbering directly in the TCA8418 datasheet before assigning rows, columns, GPIO functions, interrupt, reset, and supply pins.

Keep the I2C/SMBus traces short and route them away from switching nodes and high-current return paths. Size the host-bus pullups for the processor I/O voltage, total bus capacitance, and selected operating frequency. Although the keypad matrix includes integrated pullups, those internal resistors do not replace the pullups required on the serial communication bus.

Do not assume that every TCA84xx keypad controller is a drop-in substitute. The TCA8417 and TCA8416 are related options, but pin functions, voltage limits, register maps, matrix capacity, and interrupt behavior must be compared against the TCA8418 before substitution. Also avoid adding unnecessary external pullups to row or column inputs because the TCA8418 incorporates pullup circuitry.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The product is a keypad-scanning interface IC rather than an automotive-qualified device. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not established by the available product information.

データ検証日: 2026-11-16 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

tca8418rtwr datasheet TCA8418RTWR pinout TCA8418RTWR datasheet pdf TCA8418RTWR schematic TCA8418RTWR equivalent TCA8418RTWR replacement TCA8418RTWR cross reference TCA8418RTWR price TCA8418RTWR stock Texas Instruments TCA8418RTWR TCA8418 80 key keypad scanner TCA8418RTWR WQFN-24 application circuit

関連部品&用語

Texas Instruments TCA8418RTWR TCA8418 TCA8417 TCA8416 keypad scanner GPIO expander human-machine interface controller interface IC I2C SMBus semiconductor 24-pin WQFN RTW package QFN family surface-mount device 4 mm x 4 mm package 1 MHz I2C 1.65 V to 3.6 V 18-bit I/O 8-row by 10-column matrix 80-key support integrated pullup resistors interrupt output reset input integrated ESD protection portable audio/video personal digital assistant smartphone accessory
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示