AVISO DE ÚLTIMA COMPRA: TJA1021TK/10/C está próximo al fin de vida. Fecha límite de pedido: Contáctenos. Ver piezas alternativas disponibles →
NXP Semiconductors

TJA1021TK/10/C - LIN Transceiver | NXP Semiconductors

N.º de pieza: TJA1021TK/10/C ✗ Fin de vida
8-pin HVSON, 3 x 3 mm Package
MOQ: 1 |

TJA1021TK/10/C Descripción general

The NXP Semiconductors TJA1021TK/10/C is an automotive LIN physical-layer transceiver supporting communication rates from 1 kBd to 20 kBd in an 8-pin HVSON package with a 3 x 3 mm footprint. It provides the interface between a LIN master or slave protocol controller and the physical LIN bus while supporting LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2A, SAE J2602, and ISO 17987-4:2016 communication.

A LIN transceiver is the physical-layer component of a Local Interconnect Network. The protocol controller generates the logical command and receive data, while the transceiver converts TXD logic into a shaped LIN bus signal and converts the bus voltage into RXD for the controller. The TJA1021 therefore belongs to the hierarchy of LIN transceiver, vehicle network interface IC, automotive interface IC, and semiconductor.

The TJA1021 uses optimized slew-rate control and wave shaping to minimize electromagnetic emissions. It is pin-to-pin compatible with the TJA1020 and MC33662(B), according to the NXP manufacturer datasheet, and supports in-vehicle subnet architectures operating from 1 kBd through 20 kBd. These characteristics make it applicable to body electronics, comfort systems, lighting, door modules, seat controls, and other low-speed vehicle networks.

The 8-pin HVSON construction supports compact PCB placement while providing the package area and pin arrangement expected for automotive network interfaces. The device provides separate communication-side and logic-side functions, allowing the protocol controller to remain isolated from the physical bus interface. Its bus-level shaping is important in distributed vehicle electrical systems where a rapidly switching signal could interfere with adjacent harnesses and electronic control units.

The TJA1021 is appropriate for LIN master nodes, LIN slave nodes, body-control modules, climate-control electronics, lighting controllers, and sensor gateways. It can also support LIN-compatible industrial or transportation networks when the system design explicitly implements the LIN physical-layer specification. The manufacturer identifies the TJA1021TK family as end of life, so engineers should review availability and lifecycle requirements before starting a new design.

For PCB implementation, follow the pin-description table and exposed-pad guidance in the manufacturer datasheet. Keep the LIN and supply connections compact, provide the required bus and supply decoupling, and review termination, pull-up, routing, and grounding against the final vehicle-network topology. Do not substitute a generic transceiver solely from its bus description; confirm package pinout, logic levels, sleep behavior, and automotive qualification.

This page consolidates the device identity, LIN standards, operating-rate range, lifecycle information, package characteristics, verified drop-in relationship, and practical implementation considerations into one engineering reference. The most important sourcing action is to confirm the exact suffix, package variant, qualification level, and lifecycle plan before committing a production BOM.

Alternativas directas para TJA1021TK/10/C — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

TJA1021TK/10/C/S90

✅ Sustitución directa
📦 8-pin HVSON, 3 x 3 mm
AEC-Q100 qualification is added; cited core LIN interface parameters differ by 0%

📋 Alternativa de referencia (no en el catálogo)

TJA1021TK/10/C Especificaciones

Product Type LIN physical-layer transceiver
LIN Data Rate 1 kBd to 20 kBd
Supported LIN Versions LIN 2.0, LIN 2.1, LIN 2.2 and LIN 2.2A
Automotive Network Standard SAE J2602
International Standard ISO 17987-4:2016
Transceiver Mode LIN master or slave
Encapsulado 8-pin HVSON, 3 x 3 mm
Terminal Count 8 terminals
Tipo de montaje Surface mount
Estado del ciclo de vida End of life

Guía de configuración de pines de TJA1021TK/10/C 8-pin hvson, 3 x 3 mm

Configuración de pines para TJA1021TK/10/C (encapsulado 8-pin hvson, 3 x 3 mm). La numeración de pines, las funciones y los diagramas de conexión se definen en la hoja de datos del fabricante. Consúltela para conocer el footprint exacto y las directrices de soldadura.

Diagrama de patillaje del encapsulado 8-pin hvson, 3 x 3 mm para TJA1021TK/10/C

No hay datos detallados de patillaje disponibles para TJA1021TK/10/C.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

TJA1021TK/10/C es adecuado para 6 aplicacións: Vehicle Body-Control Module, Automotive Lighting Controller, Door and Seat Control Module, Climate-Control Electronics, Industrial LIN Sensor Gateway, Automotive Accessory Module.

🚗

Vehicle Body-Control Module

The TJA1021TK/10/C fits a LIN body-control module that connects switches, lamps, and latch actuators to a central controller. Its 1 kBd to 20 kBd operating range matches the low-speed subnet defined by LIN 2.0 through LIN 2.2A, while optimized slew rate and wave shaping help reduce electromagnetic emission from the wiring harness. The device separates the controller's TXD and RXD interface from the physical bus. Implement the documented 8-pin HVSON land pattern, including its exposed-pad connection, and verify the bus pull-up and termination arrangement in the final harness topology.

💡

Automotive Lighting Controller

A distributed lighting controller can use the TJA1021TK/10/C to communicate over a LIN subnet without placing a full vehicle network stack at the remote lamp module. The NXP manufacturer datasheet identifies in-vehicle subnetworks as the intended environment and specifies operation from 1 kBd to 20 kBd. Optimized bus wave shaping is particularly useful where the harness is long or runs near other vehicle electrical systems. Validate the module's wake-up, sleep, and supply behavior against the exact datasheet, and preserve the recommended supply and bus-component placement to avoid adding avoidable emissions or susceptibility problems.

🚗

Door and Seat Control Module

The TJA1021TK/10/C is suitable for door-lock, window, seat-position, and switch-control modules that use LIN as a cost-efficient local communication link. Its 1 kBd to 20 kBd range accommodates the low-bandwidth command traffic typical of these subsystems, while the 3 x 3 mm HVSON package supports compact controller boards. The LIN controller retains protocol and diagnostic processing, and the TJA1021 handles the physical bus conversion. Use the exact manufacturer pin-description table, connect the exposed pad as specified, and confirm EMC performance with the production wiring harness and enclosure configuration.

🏭

Climate-Control Electronics

The TJA1021TK/10/C can connect climate-control buttons, panel actuators, and sensor nodes through a LIN subnet. The device supports LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2A, SAE J2602, and ISO 17987-4:2016, allowing it to participate in standardized vehicle-network communication from 1 kBd to 20 kBd. Its slew-rate-controlled output is intended to minimize electromagnetic emission in an electronics-dense passenger compartment. Confirm the module's operating-voltage range, sleep thresholds, and wake-up behavior in the NXP manufacturer datasheet, and test EMC behavior with the final cable length, bus capacitance, and termination network.

🧩

Industrial LIN Sensor Gateway

The TJA1021TK/10/C can support a LIN sensor gateway when the equipment intentionally implements the LIN physical-layer specification. Its 1 kBd to 20 kBd range is appropriate for simple master-to-slave command and response networks, and the 3 x 3 mm HVSON package allows a compact interface section on a mixed-signal board. The physical layer converts controller TXD commands into shaped bus signals and returns bus status through RXD. Because the product is identified as end of life, confirm procurement continuity and use the TJA1021TK/10/C/S90 option when automotive qualification or an alternate lifecycle path is required.

🔧

Automotive Accessory Module

The TJA1021TK/10/C fits an accessory node that communicates commands over a LIN subnet, such as a seat accessory, HVAC actuator, or local switch interface. Its standardized support for LIN 2.x, SAE J2602, and ISO 17987-4:2016 provides a clear protocol basis for interoperability. The 20 kBd maximum rate supports the intended low-speed command class while reducing bus activity compared with faster network interfaces. Review the exact ordering suffix, supply limits, exposed-pad layout, and low-power requirements in the manufacturer datasheet. For new automotive production, compare the base part with the AEC-Q100-qualified S90 variant and validate end-of-life supply before design freeze.

Resumen de productos recomendados

TJA1021TK/10/C NXP Semiconductors Se usa en: Vehicle Body-Control Module, Automotive Lighting Controller, Door and Seat Control Module, Climate-Control Electronics, Industrial LIN Sensor Gateway, Automotive Accessory Module TJA1021TK/10/C/S90 AEC-Q100-qualified family variant Se usa en: Vehicle Body-Control Module, Climate-Control Electronics TJA1021TK same-family NXP LIN transceiver Se usa en: Automotive Lighting Controller, Automotive Accessory Module TJA1020 NXP pin-compatible LIN transceiver family Se usa en: Door and Seat Control Module MC33662 NXP pin-compatible LIN transceiver family Se usa en: Industrial LIN Sensor Gateway TJA1021T NXP TJA1021 product variant Se usa en: Automotive Accessory Module
What is the TJA1021TK/10/C?
The TJA1021TK/10/C is an NXP Semiconductors LIN physical-layer transceiver for automotive in-vehicle subnetworks. According to the NXP manufacturer datasheet, it interfaces a LIN master or slave protocol controller with the physical bus, supports data rates from 1 kBd to 20 kBd, and uses an 8-pin HVSON package measuring 3 x 3 mm. It also supports LIN 2.0 through LIN 2.2A, SAE J2602, and ISO 17987-4:2016.
What LIN standards and baud rates does TJA1021TK/10/C support?
The TJA1021TK/10/C supports LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2A, SAE J2602, and ISO 17987-4:2016 at baud rates from 1 kBd to 20 kBd. The NXP manufacturer datasheet describes the TJA1021 family as the interface between a LIN protocol controller and the physical bus in an in-vehicle network. These rates and standards position the device for low-speed vehicle subnets rather than high-bandwidth automotive Ethernet.
Where can I download the TJA1021TK/10/C datasheet PDF?
The official TJA1021TK/10/C datasheet PDF can be downloaded from the NXP document address https://www.nxp.com/docs/en/data-sheet/TJA1021.pdf. The manufacturer datasheet contains the authoritative information for electrical limits, logic thresholds, bus behavior, pin descriptions, application information, and package recommendations. Use the TJA1021 document together with the exact ordering-code information for the selected TK/10/C suffix before releasing a production design.
Where can I find the TJA1021TK/10/C pinout?
Use the pin-description table and package drawing in the NXP TJA1021 manufacturer datasheet to locate the TJA1021TK/10/C pinout. The device is an 8-pin HVSON package with a 3 x 3 mm body, and the exposed-pad connection must also be implemented as directed by the datasheet. Pin names and electrical functions should be taken from the exact ordering variant rather than copied from an unrelated eight-pin package.
Is TJA1021TK/10/C pin-compatible with TJA1020 and MC33662(B)?
Yes. The NXP manufacturer datasheet states that the TJA1021 is pin-to-pin compatible with the TJA1020 and MC33662(B). Compatibility is strongest when the candidate device uses the same physical package and equivalent logic and bus connections. Before replacement, verify package dimensions, exposed-pad treatment, supply limits, sleep behavior, LIN version support, and qualification level because pin compatibility alone does not establish complete functional equivalence.
What is the best drop-in replacement for TJA1021TK/10/C?
The closest identified same-brand drop-in option is TJA1021TK/10/C/S90, which retains the TJA1021TK/10/C package and bus interface while adding AEC-Q100 qualification information in its published description. Its electrical difference from the target is shown as 0% for the cited core interface because both implement the same TJA1021TK/10/C architecture. No additional cross-brand replacement was confirmed with an identical package and verified pin arrangement, so broader substitutions require a new engineering review.
TJA1021TK/10/C vs TJA1021TK/10/C/S90 - which is better for automotive use?
The TJA1021TK/10/C/S90 is the better choice when AEC-Q100 qualification is required because its published automotive qualification differentiates it from the base TJA1021TK/10/C. Both use the same 8-pin HVSON interface family and provide the same 1 kBd to 20 kBd LIN operation, giving a 0% difference in the cited core interface parameters. The NXP manufacturer datasheet remains the controlling document for confirming the complete ordering-code and qualification details.
When should I choose TJA1021TK/10/C over another LIN transceiver?
Choose the TJA1021TK/10/C when an existing vehicle-network design requires its established 8-pin HVSON interface and operation from 1 kBd to 20 kBd. It is appropriate when the protocol controller already uses compatible TXD and RXD logic and when the PCB follows the documented HVSON land pattern. For new production programs, first evaluate the identified AEC-Q100-qualified S90 option and confirm the end-of-life status of the base ordering code.
Is TJA1021TK/10/C suitable for a LIN body-control module?
The TJA1021TK/10/C is suitable for a LIN body-control module when that module uses the specified LIN physical layer, logic levels, and 3 x 3 mm HVSON layout. The NXP manufacturer datasheet identifies in-vehicle sub-networks as the primary application and specifies rates from 1 kBd to 20 kBd. Its optimized slew rate and wave shaping are intended to reduce electromagnetic emission, making it relevant for distributed body electronics near other vehicle wiring systems.
What is the lifecycle status of TJA1021TK/10/C?
NXP lists the TJA1021TK product information as end of life. The TJA1021TK/10/C should therefore be treated as a legacy device rather than assumed to be suitable for an unqualified new-production program. Review the manufacturer product page, the exact suffix status, remaining supply, and any approved change-control process. The TJA1021TK/10/C/S90 is the identified related automotive-qualified option for design reviews.
Where can I buy TJA1021TK/10/C and what is its price?
Use the Request a Quote form on this page to request the TJA1021TK/10/C, current unit availability, minimum order quantity, and lead time. Because the exact suffix is identified by NXP as an end-of-life product, procurement should confirm package variant, qualification status, traceability, and any scheduled final-order date in writing. The form also allows the requester to specify reel, tray, or another required shipping format.
How long is the lead time for TJA1021TK/10/C?
The current lead time for TJA1021TK/10/C should be confirmed through the Request a Quote form on this page rather than assumed from generic inventory information. NXP identifies the TJA1021TK family as end of life, so lead time can depend on remaining factory stock, regional inventory, traceability requirements, and the exact suffix. Provide the required quantity, date code, packaging format, and quality-document requirements when requesting a formal quotation.
Is TJA1021TK/10/C in stock?
Current stock for TJA1021TK/10/C should be confirmed through the Request a Quote form on this page. NXP marks the TJA1021TK family as end of life, which makes exact suffix, manufacturing status, and quantity availability important purchasing details. A quotation response should identify the package variant, packing format, lot or date-code information when available, and the delivery schedule for the requested quantity.
What are the key specifications of TJA1021TK/10/C that engineers should know?
The TJA1021TK/10/C is an 8-pin HVSON LIN transceiver operating from 1 kBd to 20 kBd and supporting LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2A, SAE J2602, and ISO 17987-4:2016. Its package body measures 3 x 3 mm, and the NXP manufacturer datasheet states that it is pin-to-pin compatible with the TJA1020 and MC33662(B). Optimized slew rate and wave shaping are intended to minimize electromagnetic emission.
What can replace TJA1021TK/10/C?
TJA1021TK/10/C/S90 is the confirmed same-brand replacement candidate identified for this part because it retains the TJA1021TK/10/C architecture and 8-pin HVSON interface while adding AEC-Q100 qualification information. The NXP manufacturer datasheet also identifies the TJA1020 and MC33662(B) as pin-to-pin compatible families, but an exact package and ordering suffix must be confirmed before either is treated as a drop-in replacement. No cross-brand same-package substitute was confirmed.

Datos de referencia de ingeniería para TJA1021TK/10/C — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose the TJA1021TK/10/C for an existing LIN design that uses the documented 8-pin HVSON layout and requires operation from 1 kBd to 20 kBd with LIN 2.0 through LIN 2.2A support. Select TJA1021TK/10/C/S90 when the same interface is needed with AEC-Q100 qualification information. Consider TJA1020 or MC33662(B) only after confirming that the exact ordering variant has the same package dimensions, exposed-pad arrangement, electrical limits, and supply behavior. Avoid a generic eight-pin transceiver unless its pinout, LIN version, sleep strategy, and bus-waveform requirements are fully verified. Because NXP identifies the TJA1021TK family as end of life, a new production design should begin with lifecycle review rather than a simple footprint check.

Comparación con alternativas

Parámetro Este producto TJA1021TK/10/C/S90
Brand NXP Semiconductors NXP Semiconductors
Package 8-pin HVSON, 3 x 3 mm 8-pin HVSON, 3 x 3 mm
Function LIN master/slave physical-layer transceiver LIN master/slave physical-layer transceiver
LIN Data Rate 1 kBd to 20 kBd 1 kBd to 20 kBd
Supported LIN Versions LIN 2.0, 2.1, 2.2 and 2.2A LIN 2.0, 2.1, 2.2 and 2.2A
Automotive Standards SAE J2602 and ISO 17987-4:2016 SAE J2602 and ISO 17987-4:2016
Core Interface Parameter Difference Reference 0% difference for cited core interface

Diferenciadores clave

  • Documented compatibility with established NXP LIN families (frente a TJA1020)
  • Automotive qualification option in the same interface family (frente a TJA1021TK/10/C/S90)
  • Compatibility with the MC33662(B) LIN interface family (frente a MC33662(B))

Notas de diseño

Implement the 8-pin HVSON footprint exactly as shown in the NXP manufacturer datasheet, including the exposed-pad connection and its recommended layout. Keep the TXD, RXD, supply, ground, and LIN connections short, and place the specified local decoupling directly at the relevant device pins. Do not substitute a generic SOIC-8 land pattern merely because both packages contain eight terminals.

Route the LIN bus away from sensitive analog and high-speed digital traces, and keep the bus-side return path continuous to reduce radiated emissions and susceptibility. Apply the bus pull-up and termination components specified for the complete network topology. Because the TJA1021 uses optimized slew rate and wave shaping, maintaining the documented component placement and trace geometry preserves the intended EMC behavior.

Check the exact ordering suffix before releasing the PCB or placing a purchase order. TJA1021TK, TJA1021T, TJA1021TK/10/C, and TJA1021TK/10/C/S90 are not automatically interchangeable solely because they share the TJA1021 name. Confirm package, qualification, temperature range, and lifecycle status, then compare the electrical limits and pin descriptions for the exact device being installed.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

AEC-Q100 is identified for the related TJA1021TK/10/C/S90 ordering code. Compliance status for the base TJA1021TK/10/C should be confirmed through the exact manufacturer product documentation.

Datos verificados el: 2026-11-18 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

TJA1021TK/10/C datasheet TJA1021TK/10/C pinout TJA1021TK/10/C datasheet pdf TJA1021TK/10/C equivalent TJA1021TK/10/C replacement TJA1021TK/10/C cross reference TJA1021TK/10/C footprint TJA1021TK/10/C schematic TJA1021TK/10/C price TJA1021TK/10/C stock NXP TJA1021TK/10/C TJA1021TK vs TJA1021TK/10/C/S90

Componentes & términos relacionados

NXP Semiconductors TJA1021TK/10/C TJA1021TK/10/C/S90 TJA1021TK TJA1021T TJA1020 MC33662 MC33662(B) LIN transceiver physical-layer transceiver automotive interface IC vehicle network interface LIN 2.0 LIN 2.1 LIN 2.2 LIN 2.2A SAE J2602 ISO 17987-4:2016 AEC-Q100 8-pin HVSON 3 x 3 mm package surface-mount package TXD RXD 1 kBd to 20 kBd automotive sub-network electromagnetic emission end-of-life product
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ