NXP Semiconductors

TJA1040T/N1 - 1 Mbit/s CAN Transceiver | NXP Semiconductors

N.º de pieza: TJA1040T/N1 ✗ Fin de vida
8-SO, 8 pins Package
MOQ: 1 |

TJA1040T/N1 Descripción general

The NXP Semiconductors TJA1040T/N1 is a high-speed CAN bus transceiver with a maximum signaling rate of 1 Mbit/s, supplied in an 8-pin SO package. It provides the physical-layer interface between a CAN protocol controller and the differential CAN bus, combining a differential transmitter with a differential receiver. The device is intended primarily for high-speed in-vehicle passenger-car networks, where a compact controller-to-bus interface enables distributed automotive electronics to exchange safety, body, and powertrain-related data.

A CAN transceiver is a semiconductor interface device that converts logic-level transmit and receive signals into the differential signaling used on a Controller Area Network. In the hierarchy of electronic components, the TJA1040T/N1 is an interface IC, specifically a CAN physical-layer transceiver. A host microcontroller or dedicated CAN controller handles message framing, arbitration, filtering, and protocol timing, while the transceiver translates those controller signals into robust bus-level voltages and converts received bus states into logic-compatible data.

The key operating headline is a maximum data rate of 1 Mbit/s, with differential transmit and receive capability. The 8-SO package keeps the physical interface compact for automotive electronic control units and other embedded CAN systems. The NXP product page specifically identifies passenger cars as the principal application environment. These characteristics make the TJA1040T/N1 relevant to designs that need a conventional high-speed CAN physical layer rather than a low-speed fault-tolerant body-network interface.

The TJA1040T/N1 belongs to an older generation of CAN transceivers whose successor products can add functions such as standby control, split-buffer operation, or expanded I/O voltage support. Its core role remains straightforward: TXD accepts a controller-side transmit signal, RXD presents the received bus state to the controller, and the differential CANH and CANL pins connect to the bus. Exact electrical limits, loopback behavior, and pin functions should be checked against the manufacturer data sheet before final circuit release.

Typical applications include passenger-car body-control modules, powertrain controllers, automotive comfort systems, CAN-based sensors, and industrial or embedded equipment using a standard 1 Mbit/s CAN network. In an automotive control unit, the transceiver provides the physical link between a CAN controller and the two-wire bus while leaving protocol functions to the controller. Its differential interface also suits systems where minimizing susceptibility to common-mode noise is important.

PCB design should preserve the short, symmetric CANH and CANL connection between the transceiver and the bus connector, keep the connector and bus stubs short, and provide the required decoupling directly at the device supply pins. The 8-SO footprint simplifies assembly but requires careful escape routing around the two bus pins. Review the recommended application circuit, termination requirements, supply voltage, and loopback configuration in the NXP data sheet when laying out the module.

This product record combines the manufacturer interface description, ordering information, package details, lifecycle information, and replacement guidance with practical PCB considerations. It also distinguishes strict same-footprint substitutes from newer CAN transceivers that offer additional functions but may require different pin interpretation or board-level qualification.

Alternativas directas para TJA1040T/N1 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

TJA1042T/3,1J

✅ Sustitución directa
📦 SO-8
Retains the 8-pin CAN transceiver footprint and up-to-1-Mbit/s class of operation, but the SPLIT-related position is repurposed and newer mode behavior must be verified.

📋 Alternativa de referencia (no en el catálogo)

SN65HVD1040

✅ Sustitución directa
📦 SO-8
Same 8-pin conventional CAN transceiver arrangement; timing, supply limits, and qualification details should be compared with the TJA1040T/N1.

📋 Alternativa de referencia (no en el catálogo)

TJA1040T/N1 Especificaciones

Product Type 1 high-speed CAN transceiver per package
Maximum CAN Data Rate 1 Mbit/s
Protocol Controller Area Network (CAN)
Transmit Interface 1 differential CAN output channel
Receive Interface 1 differential CAN input channel
Bus Pins 2 differential pins (CANH and CANL)
Encapsulado 8-SO, 8 pins
Tipo de montaje Surface mount
Manufacturer NXP Semiconductors
Primary Application Passenger-car high-speed CAN networks

Guía de configuración de pines de TJA1040T/N1 8-so, 8 pins

Configuración de pines para TJA1040T/N1 (encapsulado 8-so, 8 pins). La numeración de pines, las funciones y los diagramas de conexión se definen en la hoja de datos del fabricante. Consúltela para conocer el footprint exacto y las directrices de soldadura.

Diagrama de patillaje del encapsulado 8-so, 8 pins para TJA1040T/N1

No hay datos detallados de patillaje disponibles para TJA1040T/N1.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

TJA1040T/N1 es adecuado para 6 aplicacións: Passenger-Car Body Control Module, Powertrain CAN Interface, Automotive Comfort and Convenience System, CAN-Based Sensor Node, Industrial CAN Controller Module, Existing Automotive ECU Retrofit.

🚗

Passenger-Car Body Control Module

The TJA1040T/N1 fits a body control module that connects a CAN controller to passenger-car body networks operating up to 1 Mbit/s. Its differential transmitter drives the CANH and CANL bus conductors, while its differential receiver returns the bus state to the controller for decoding. This arrangement separates physical-layer signaling from protocol processing and allows the controller to handle arbitration, filtering, and diagnostics. The 8-SO package also supports compact control-unit layouts, although CANH and CANL routing must remain short and reasonably symmetric. Designers should verify supply limits, TXD and RXD thresholds, bus fault behavior, and the exact temperature-grade ordering code against the NXP data sheet.

🚗

Powertrain CAN Interface

The TJA1040T/N1 provides a high-speed physical interface for an engine, transmission, or powertrain controller that exchanges data over a standard 1 Mbit/s CAN bus. Because the controller performs message scheduling and protocol checking, the transceiver can concentrate on robust differential bus communication. Its 1 Mbit/s capability matches the high-speed passenger-car network class identified by NXP. Layout remains the decisive integration concern: place the device and its decoupling close to the controller, keep the two bus traces away from fast digital edges, and route them toward the connector without long unprotected stubs. The selected package and vehicle qualification requirements should also be confirmed during component validation.

🚗

Automotive Comfort and Convenience System

TJA1040T/N1 can form the bus-facing section of a door, lighting, climate, or seat-control module that communicates with other passenger-car electronic units at up to 1 Mbit/s. The transceiver converts the controller's TXD signal into differential CANH and CANL activity and presents the received bus condition on RXD. This allows compact modules to participate in a shared vehicle network without implementing the physical layer in discrete components. Because switching relays, motors, and LED drivers can introduce electrical noise, engineers should follow the manufacturer's application circuit, preserve short bus connections, and use appropriate protection and filtering at the connector. Confirm the operating temperature and qualification requirements for the target vehicle program.

🧩

CAN-Based Sensor Node

The TJA1040T/N1 is suitable for a compact sensor or actuator node that reports measurements to a CAN controller at a standard high-speed CAN rate. Differential signaling helps the node communicate over a shared two-wire bus while rejecting common-mode disturbance encountered in industrial or vehicle environments. The controller determines message content and timing, while the transceiver supplies the physical-layer drive and receive paths. For a sensor placed away from the main controller, the designer should minimize the unprotected bus stub, maintain a controlled termination strategy, and validate operation across voltage and temperature extremes. Because the target MPN is obsolete, a new design should also compare the SN65HVD1040 or a current NXP transceiver before committing the layout.

🏭

Industrial CAN Controller Module

The TJA1040T/N1 can serve as the physical-layer element in an embedded industrial module using a conventional 1 Mbit/s CAN network. It allows a microcontroller with a CAN controller, or a dedicated protocol controller, to exchange messages over a differential bus without implementing transmitter and receiver circuits on the controller board. The 8-SO footprint supports compact modules, while its automotive origins make it relevant to equipment requiring robust differential communication. The integration should include local supply decoupling, short CANH and CANL exits, appropriate connector protection, and a termination arrangement compatible with the bus topology. Review the NXP absolute maximum ratings and timing limits for industrial temperature, ground-offset, and fault-recovery conditions.

🔧

Existing Automotive ECU Retrofit

TJA1040T/N1 is most relevant when maintaining or repairing an existing automotive electronic control unit that uses the established TJA1040 8-SO physical interface. Retaining the familiar footprint can reduce the scope of a board-level redesign, provided the replacement part is checked for matching supply voltage, logic levels, mode configuration, timing, and temperature grade. The TJA1040T/N1 is listed as obsolete, so procurement planning should focus on confirmed stock and traceable sourcing rather than expecting a standard active-production cycle. For functional safety or long-term production programs, engineers should compare the candidate with a current qualified transceiver and complete its own qualification review before releasing a new vehicle build.

Resumen de productos recomendados

TJA1042T/3,1J Newer same-brand CAN transceiver option Se usa en: Passenger-Car Body Control Module, Powertrain CAN Interface, Automotive Comfort and Convenience System, CAN-Based Sensor Node, Industrial CAN Controller Module, Existing Automotive ECU Retrofit SN65HVD1040 Cross-brand drop-in physical-layer alternative Se usa en: Passenger-Car Body Control Module, Powertrain CAN Interface, Automotive Comfort and Convenience System, CAN-Based Sensor Node, Industrial CAN Controller Module, Existing Automotive ECU Retrofit
What is the TJA1040T/N1 and what does it do?
The TJA1040T/N1 is a high-speed CAN bus transceiver that connects a CAN protocol controller to a differential two-wire network. According to the NXP product page, it provides differential transmit capability to the bus and differential receive capability to the controller. The device supports operation up to 1 Mbit/s and is packaged as an 8-SO part intended primarily for passenger-car systems.
What is the maximum data rate of TJA1040T/N1?
The TJA1040T/N1 supports a maximum CAN signaling rate of 1 Mbit/s. The NXP product description identifies it as a high-speed interface intended for applications up to 1 MBaud in passenger cars. This rate concerns the physical CAN bus signaling; message arbitration, frame handling, and protocol timing remain the responsibility of the CAN controller connected to the transceiver.
Where can I download the TJA1040T datasheet PDF?
The official TJA1040 data sheet is available from NXP at https://www.nxp.com/docs/en/data-sheet/TJA1040.pdf. It is the appropriate document for checking the complete pin description, absolute maximum ratings, electrical characteristics, timing, application circuit, and test conditions before designing a PCB. The TJA1040T/N1 ordering code uses this same TJA1040 device family, but purchasing suffixes should still be checked against the orderable-parts table.
Where can I find the TJA1040T pinout?
The TJA1040T pin assignment is documented in the official NXP TJA1040 data sheet, beginning with the package drawing and pin-description table. The TJA1040T/N1 uses the 8-SO outline, and the bus-side, supply, ground, TXD, RXD, and mode-related connections must be assigned exactly as shown there. Use the data sheet rather than assigning pins solely from a distributor page, especially when considering a newer transceiver as a replacement.
Is TJA1040T/N1 suitable for automotive passenger-car systems?
Yes, the TJA1040T/N1 is specifically identified by NXP as a high-speed CAN physical-layer interface intended for passenger-car applications up to 1 Mbit/s. It supplies differential transmit and receive functions between the CAN controller and the bus. Final automotive suitability still depends on the individual orderable variant, temperature grade, qualification status, and the complete electrical requirements of the target vehicle platform.
What is the difference between TJA1040T/N1 and TJA1042?
The TJA1040T/N1 is an older high-speed CAN transceiver, while TJA1042 is a newer NXP device with additional control and I/O features. Although both use an 8-pin style package, the mode-pin behavior differs: TJA1042 no longer provides the earlier SPLIT function, and that position may instead be used as no-connect or a VIO-related function. Verify the pin tables and mode configuration before treating the newer part as interchangeable.
Is SN65HVD1040 a drop-in replacement for TJA1040T/N1?
The SN65HVD1040 from Texas Instruments is identified in replacement guidance as a drop-in option for the TJA1040 family, including the 8-pin package used by the TJA1040T/N1. Its pin arrangement is structured around the same TXD, RXD, supply, ground, CANH, and CANL physical-layer functions. Review the two data sheets for operating voltage, timing, mode behavior, and qualification before production use.
What is the best drop-in replacement for TJA1040T/N1?
The SN65HVD1040 is the clearest published drop-in replacement candidate for the TJA1040T/N1 because it preserves the 8-pin SO footprint and the conventional CAN transceiver pin functions. Other related devices can add standby, VIO, split-buffer, or automotive features that may change pin interpretation. Confirm that the replacement is an ordering-code and package-temperature match, then review bus timing and supply conditions before redesign.
When should I choose TJA1040T/N1 over a newer CAN transceiver?
Choose the TJA1040T/N1 when maintaining an existing 8-SO high-speed CAN design that relies on its established 1 Mbit/s physical-layer behavior and does not require newer standby, VIO, split-buffer, or diagnostic features. A newer transceiver should be selected when those additional functions or an active lifecycle state are required. For new mixed-signal designs, verify electromagnetic behavior and timing margin rather than relying on package similarity alone.
TJA1040T/N1 vs TJA1042 — which is better for a new CAN design?
The TJA1042 is generally the better starting point for a new design that benefits from an active, feature-rich CAN transceiver, whereas the TJA1040T/N1 is more appropriate for maintaining an established design. The comparison must include lifecycle status, mode-pin behavior, supply architecture, logic compatibility, and automotive qualification. A shared 8-pin footprint does not make the mode and timing characteristics identical.
Is TJA1040T/N1 the same as TJA1050T/N1?
No, the TJA1040T/N1 and TJA1050T/N1 are related 8-pin high-speed CAN transceivers but include different mode behavior. The TJA1050 family provides a standby-related operating option that the conventional TJA1040 operation does not reproduce in the same way. If standby control is required, review the actual pin and mode tables and confirm whether PCB or firmware changes are necessary.
What is the best Texas Instruments equivalent for TJA1040T/N1?
The SN65HVD1040 is the most direct Texas Instruments equivalent identified for a same-footprint migration from the TJA1040 family. It preserves an 8-pin CAN transceiver arrangement and supports the familiar controller-side TXD and RXD functions plus the differential bus interface. For safety- or automotive-qualified designs, also compare the exact SN65HVD1040 ordering code, temperature range, and qualification documentation.
Can TJA1040T/N1 replace TJA1042 without circuit changes?
The TJA1040T/N1 may preserve the basic CAN bus connection, but it should not automatically replace a TJA1042 without a detailed mode-pin review. TJA1042 changes the role of the position formerly associated with SPLIT, and newer devices may also differ in standby, VIO, supply, timing, and protection behavior. Confirm every pin and operating mode against both data sheets before making the substitution.
Where can I buy TJA1040T/N1 and check its current availability?
Use the Request a Quote form on this page to request the current availability, minimum order quantity, and lead time for TJA1040T/N1. Because this component is listed as obsolete, procurement conditions can vary significantly with the exact NXP ordering suffix and remaining inventory. Specify the required package, temperature grade, and reel or tray format in the request.
What are the key specifications of TJA1040T/N1 that engineers should know?
The principal engineering facts are a 1 Mbit/s maximum CAN data rate, differential transmit and receive capability, an 8-SO surface-mount package, and an intended use in high-speed passenger-car networks. The TJA1040T/N1 is the physical bus interface rather than the CAN protocol controller, so arbitration, filtering, and frame processing remain outside its functions. Exact supply voltages, logic thresholds, timing, and temperature limits must be taken from the NXP data sheet.

Datos de referencia de ingeniería para TJA1040T/N1 — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose TJA1040T/N1 when repairing or maintaining an existing 8-SO TJA1040-based passenger-car CAN interface and no newer mode functions are required. Its established 1 Mbit/s differential physical layer can minimize PCB disruption when the supply, logic thresholds, timing, and pin behavior are confirmed unchanged. Choose SN65HVD1040 when a published drop-in migration is needed and the board can accommodate the manufacturer's specified operating and qualification conditions. Choose TJA1042T/3,1J for a new design because it is identified as active and offers newer control capabilities, but do not rely on package similarity alone: its mode-pin behavior differs from the older TJA1040. For any production release, verify the exact ordering suffix, temperature range, supply architecture, automotive qualification, and lifecycle requirements rather than selecting solely by the CAN data rate.

Comparación con alternativas

Parámetro Este producto TJA1042T/3,1J SN65HVD1040
Package 8-SO SO-8 SO-8
Brand NXP Semiconductors NXP Semiconductors Texas Instruments
Product Type High-speed CAN transceiver High-speed CAN transceiver High-speed CAN transceiver
Maximum Data Rate 1 Mbit/s 1 Mbit/s class 1 Mbit/s class
Differential Transmit Supported Supported Supported
Differential Receive Supported Supported Supported
Primary Application Passenger-car high-speed CAN networks High-speed CAN networks High-speed CAN networks
Mode and Control Features Conventional TJA1040 mode behavior Newer mode behavior; SPLIT position repurposed Conventional TJA1040-style mode behavior

Diferenciadores clave

  • Established 1 Mbit/s high-speed CAN physical interface (frente a SN65HVD1040)
  • Direct compatibility pathway for existing passenger-car CAN layouts (frente a TJA1042T/3,1J)
  • Known lifecycle position for legacy maintenance decisions (frente a TJA1042T/3,1J)

Notas de diseño

Route CANH and CANL as a close, balanced pair from the TJA1040T/N1 to the connector or bus interface. Avoid long stubs, abrupt impedance discontinuities, and routing either conductor beside high-current switching nodes. Place the transceiver near the protected connector-side entry point where practical, while keeping its supply decoupling close to the device. Confirm the final pad assignments and exposed package geometry from the NXP data-sheet drawing before releasing artwork.

Do not assume that every 8-pin CAN transceiver is electrically interchangeable. The TJA1042 changes the role associated with the earlier SPLIT position, and newer parts may add VIO, standby, or diagnostic functions. For a proposed replacement, compare TXD and RXD thresholds, propagation delay, supply range, bus fault behavior, mode states, and temperature grade. A matching SO-8 outline alone does not prove drop-in compatibility.

Implement the manufacturer-recommended application circuit and place all required local capacitors adjacent to the appropriate supply pins. Keep the CAN bus interface away from switching regulators, inductors, high-current relays, and crystal-clock routing. Use a termination strategy appropriate for the complete bus topology, and evaluate connector-level ESD protection without adding excessive capacitance to CANH or CANL. Validate the assembled board for dominant and recessive bus states and controller recovery after faults.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The manufacturer product page and data sheet links are identified, but definitive compliance and qualification statements for the exact TJA1040T/N1 ordering code were not present in the cited excerpts.

Búsquedas relacionadas

tja1040t datasheet tja1040t pdf datasheet tja1040t pdf tja1040t cm 118 datasheet nxp tja1040t TJA1040T/N1 datasheet TJA1040T/N1 pinout TJA1040T/N1 replacement TJA1040T/N1 vs SN65HVD1040 TJA1040T/N1 price

Componentes & términos relacionados

NXP Semiconductors TJA1040T/N1 TJA1040T TJA1042T/3,1J SN65HVD1040 CAN transceiver Controller Area Network physical-layer interface interface IC semiconductor differential transceiver CAN bus CANH CANL TXD RXD 1 Mbit/s 8-SO package SOIC surface mount passenger-car electronics automotive control unit RoHS REACH
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ